My s3 mini sometimes shows « in charging » when it really isn't. This happens much after calls; when it's really plugged in, it continuously disconnects and reconnects to electrical line. This happens as well with other chargers. What's happening? Maybe connector has failed?
Inviato dal mio GT-I9300 utilizzando Tapatalk
Related
Hello i have xperia z that doesn't turn on.
I was watching some youtube videos last night and when i went to sleep i turned the phone off and charge it the battery was at about 26%.
When i came from school the phone wont turn on, it doesnt charge left it for 2h or so with different chargers and there is no led light.
I was running existenz rom with xzgaming kernel (the bootloader was unlocked).
plz help me
Try this :
- power + volume up for 10 seconds
- press the volume up button while plugging the USB cable to a pc.
Doest the blue light of fastboot appear?
Envoyé de mon C6603 en utilisant Tapatalk
I think the battery is fully discharged. But I dont know. And whats happening if you do that what sichroteph said?
Gesendet von meinem C6603 mit Tapatalk
Sichroteph said:
Try this :
- power + volume up for 10 seconds
- press the volume up button while plugging the USB cable to a pc.
Doest the blue light of fastboot appear?
Envoyé de mon C6603 en utilisant Tapatalk
Click to expand...
Click to collapse
gripfly said:
I think the battery is fully discharged. But I dont know. And whats happening if you do that what sichroteph said?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Nothing happens...
Then it can be either way the charger or the cable. Try another one you trust and leave it the whole night. Maybe it is the connector too, then try the dock instead.
Envoyé de mon C6603 en utilisant Tapatalk
Do you tryed to turn on the phone when it is charging?(after 15min or something)
I am still charging it
So after chargig it the whole night still nothing...
Anyone have any ideas what else could be wrong?
Edit:This is getting wird, 3days later and my das phone yust died (nexus s)
Ok So I bought some adapters (see attachments) to charge mi Z1 via the magnetic port, So far I dont have problems, until the KitKat update, in all JB versions I can charge it without any problem, I have one charger in my room and I use another for the school (different cable, different power source, different adaptor) But after the KitKat update there is a point (mostly when the battery reaches almost 50%) when the phone starts to get some overheat, there is even a point when stops charging (maybe for security I suppose) I left it in the night and when I wake up the battery is at 60% + -, and the phone its hot as I was playing with it, it only happen via the magnetic and only with the kitkat upgrade, anyone else having this behaviour? I have do a update via PC Companion, and after notice these behaviour, a complete wipe with SEUS, same results
any idea?
BTW If i charge the phone turned off it doesnt get overheat..... and charges normally
Really? Nobody?
Enviado desde mi C6906 mediante Tapatalk
jacker60 said:
Really? Nobody?
Enviado desde mi C6906 mediante Tapatalk
Click to expand...
Click to collapse
Z1 compact doing the same after kk.
jacker60 said:
Ok So I bought some adapters (see attachments) to charge mi Z1 via the magnetic port, So far I dont have problems, until the KitKat update, in all JB versions I can charge it without any problem, I have one charger in my room and I use another for the school (different cable, different power source, different adaptor) But after the KitKat update there is a point (mostly when the battery reaches almost 50%) when the phone starts to get some overheat, there is even a point when stops charging (maybe for security I suppose) I left it in the night and when I wake up the battery is at 60% + -, and the phone its hot as I was playing with it, it only happen via the magnetic and only with the kitkat upgrade, anyone else having this behaviour? I have do a update via PC Companion, and after notice these behaviour, a complete wipe with SEUS, same results
any idea?
BTW If i charge the phone turned off it doesnt get overheat..... and charges normally
Click to expand...
Click to collapse
I'm charging my phone with the dock (which is obviously magnetic) but I haven't noticed anything out of the ordinary. Of course I dont touch it while it's docked , but I haven't noticed the battery stop charging or anything. could be your charger.
I'm using magnet-USB cable (not adapter) and there's no problems with it..
Sent from my C6903 using Tapatalk
RevokOne said:
Z1 compact doing the same after kk.
Click to expand...
Click to collapse
Seriously? well I'm not feeling alone now...
KarimSalloum said:
I'm charging my phone with the dock (which is obviously magnetic) but I haven't noticed anything out of the ordinary. Of course I dont touch it while it's docked , but I haven't noticed the battery stop charging or anything. could be your charger.
Click to expand...
Click to collapse
I dont touch the phone too, well its strange because i go back too JB and this doesnt happen, and update again and it starts to heat, also I tried 2 different chargers :/
funky0308 said:
I'm using magnet-USB cable (not adapter) and there's no problems with it..
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Well maybe I will try another flashing and see what happen :crying:
Hi.
I have used Timur's Kernel on my Nexus 7 a while in my car.
When I start the car the tablet wake up and when I stop det car the tablet goes to sleepmode. (powersource removed)
Anyway, today I installed Car Home Ultra, and the sleedmode don't work anymore, when I disconnect power nothing happens.
play.google.com/store/apps/details?id=spinninghead.carhome
How can I fix this?
I Can se the Car Home Ultra app have a feature that starts and stops the app when connected to a BT device, but i dont have a BT compatible stereo so that is not an option for me.
When the powersource is removed I want the device to go to sleepmode so it will save as much power as possible, maybe alså close all apps.
Also I want the Car Home Ultra app to start when the power is plugged in.
Maybe i found the ansver.
And why does USB ROM require an OTG adapter to activate FI-mode (suspend to sleep on power loss)?
This is to ensure the tablet will not suspend to sleep when you connect/disconnect a powered std. USB cable. Say, when you remove the tablet from your car to use it at home for some time.
Click to expand...
Click to collapse
I have only tested with normal powercable in the house with Car Home Ultra
.
ref: http://rootzwiki.com/index.php?app=core&module=search&do=search&fromMainBar=1
Evelen said:
Maybe i found the ansver.
I have only tested with normal powercable in the house with Car Home Ultra
.
ref: http://rootzwiki.com/index.php?app=core&module=search&do=search&fromMainBar=1
Click to expand...
Click to collapse
I had same problems But with otg-y cable i resolved. (i can also suggest u tasker)
Inviato dal mio Nexus 7 utilizzando Tapatalk
furious84 said:
I had same problems But with otg-y cable i resolved. (i can also suggest u tasker)
Inviato dal mio Nexus 7 utilizzando Tapatalk
Click to expand...
Click to collapse
thanks, it worked ok with otg cable.
Is tasker necessary to close apps before sleepmode?
My nexus use about 60% of the battery if it is sleepmode 24h (in the car 7-17 degrees Celsius)
Is that normal?
Evelen said:
thanks, it worked ok with otg cable.
Is tasker necessary to close apps before sleepmode?
My nexus use about 60% of the battery if it is sleepmode 24h (in the car 7-17 degrees Celsius)
Is that normal?
Click to expand...
Click to collapse
Sincerelly My is not a fix installation (i use n7 in Car and at home) so i don't know how % battery use in 24h But i try To remain n7 in Car in sleep mode for about 4 hours and lost maybe 2% or less i don t remember. Anyway i know somepeople in the night lost 1-2%/h so i suppose If The lost is regular in 24h are 24-48%.
For tasker You want when Power off The app will Close, uhm Sincerelly without tasker i have not idea how and If is possible.in My case, with tasker work so:
When Power plug and dac usb plug start bt, Then Close PLANE mode start 3g tuneinradio torque and Car home ultra. While start all that i send a messagge To My n4 for start The home for When i am in Car and toggle bt.
When i plug off Power all that will close.
Only thing i don t like is sleep mode start before all things will close, but My task work fine.
Anyway tasker is a fantastic app.
Inviato dal mio Nexus 7 utilizzando Tapatalk
Hi.
I'm writing for a problem that occured to my girlfriend's phone so sorry if I'm not very specific.
She have a galaxy mini 2 gt-s6500 and it seems that the phone cannot charge.
She put the phone on charge with 20% of battery remaning and gradually the charge decreasing while the phone showed the yellow triangle with the exclamation mark.
Now the phone is plug and the display is black or black with the backlight turned on, what she can do ?
The phone has android stock.
Thanks a lot. Bye !
I heard something about dust in the phones plug. And after cleaning this (with a needle e.g.) my device's charging problems were gone.
It's worth a try.
Gesendet von meinem SM-G900F mit Tapatalk
i used original charge fast, but suddenly the charge is super slow. This was after a downgrade rom
Only 800-900 mA and it takes 3-4 hours for full charge. but i have found that wireless charging is still can fast charging
The adapter and cable are good, i tested with pocophone with the same charger gives 2540mA.
and other problem my mi9 can not detect fastboot mode in any computer,cable is ori and good,driver instaled, i used other phone can detect fastboot, but in recovery mode still detect to connect with MIassistant
anyone can help give advice, thanks before
htconehox1 said:
i used original charge fast, but suddenly the charge is super slow. This was after a downgrade rom
Only 800-900 mA and it takes 3-4 hours for full charge. but i have found that wireless charging is still can fast charging
The adapter and cable are good, i tested with pocophone with the same charger gives 2540mA.
and other problem my mi9 can not detect fastboot mode in any computer,cable is ori and good,driver instaled, i used other phone can detect fastboot, but in recovery mode still detect to connect with MIassistant
anyone can help give advice, thanks before
Click to expand...
Click to collapse
Hi.
I had a similar problem, that was solved changing the charging cable.
Try it, if you haven't already.
Maf
Enviado do meu MI 9 através do Tapatalk
mafarreco said:
Hi.
I had a similar problem, that was solved changing the charging cable.
Try it, if you haven't already.
Maf
Enviado do meu MI 9 através do Tapatalk
Click to expand...
Click to collapse
thanks for reply
I have tried various the charging cable but still can't
maybe it's a hardware failure
or just bug ROM?because I see in many forums that have experienced the same thing
htconehox1 said:
thanks for reply
I have tried various the charging cable but still can't
maybe it's a hardware failure
or just bug ROM?because I see in many forums that have experienced the same thing
Click to expand...
Click to collapse
I would check and clean the charge connector as well if the charger and cables are working fine with another phone
Envoyé de mon MI 9 en utilisant Tapatalk
Khyllion said:
I would check and clean the charge connector as well if the charger and cables are working fine with another phone
Envoyé de mon MI 9 en utilisant Tapatalk
Click to expand...
Click to collapse
solved with buy new original cable and uninstall driver , thank u
Which driver did you uninstalled? I experience the same problem and not working with changing the cable!