Database Develop

Bootloop in ALL Sense ROMs

Hi guys,
My HTC One fails to run any Kitkat Sense-based ROM. Ive tried ViperOne 5.5.1 and InsertCoin 8.1
The ROM installs properly (I wiped the data in Aroma). But during bootup, the htc dialer process asks me to wait or cancel.
If I choose to Wait, then the ROM will manage to enter half the setup process. But it will continue rebooting and rebooting. Also, when I cancelled most of the setup options, the ROM had no SIM access. It showed 'Emergency Calls Only'
The problem is identical in ViperOne and InsertCoin.
Here's my getvar all:
But Cyanogenmod is working PERFECTLY
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4071mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
I guess that the 4.4 firmware is required ?? Do I need to flash that?? Or is the problem anything else?? I appreciate any help
Thank you

Try to SuperCID. Maybe that'll work cause I see you're s-offed
Happy Flashing Sent from a proud owner of the HTC One.

You can try extracting the boot.img and flashing it.
Sent from my HTC One using Tapatalk

Flash Kitkat firmware.zip and try again. Do not s-on or lock bootloader
sent from my mobile device

SaHiLzZ said:
Flash Kitkat firmware.zip and try again. Do not s-on or lock bootloader
sent from my mobile device
Click to expand...
Click to collapse
Thanks a lot. Just to re-verify, I've to do what it sAYs in this link right:
http://forum.xda-developers.com/showthread.php?t=2485651

raghav kapur said:
Thanks a lot. Just to re-verify, I've to do what it sAYs in this link right:
http://forum.xda-developers.com/showthread.php?t=2485651
Click to expand...
Click to collapse
got SuperCid and flashed the KitKat firmware zip with OS version as 4.19.401.8 and hboot 1.56
no luck :'(
Status quo
Any ideas ??

Flash a full .401.7 RUU and update all the way through to kit Kat official. No other ideas at the moment.
sent from my mobile device

SaHiLzZ said:
Flash a full .401.7 RUU and update all the way through to kit Kat official. No other ideas at the moment.
sent from my mobile device
Click to expand...
Click to collapse
My region (Middle East and Africa) hasn't rolled out 4.4 yet :/
I think ill continue with CM till I find a solution of some sort

raghav kapur said:
got SuperCid and flashed the KitKat firmware zip with OS version as 4.19.401.8 and hboot 1.56
no luck :'(
Status quo
Any ideas ??
Click to expand...
Click to collapse
what recovery do you have? if you don't already have it, try TWRP 2.6.3.3

cr1960 said:
what recovery do you have? if you don't already have it, try TWRP 2.6.3.3
Click to expand...
Click to collapse
I already have 2.6.3.3. My phone is currently on a perfectly working CM11 M4. But for some reason, my USB OTG is not working in TWRP
It shows a blank directory. Got any ideas??
Thanks

raghav kapur said:
My region (Middle East and Africa) hasn't rolled out 4.4 yet :/
I think ill continue with CM till I find a solution of some sort
Click to expand...
Click to collapse
I'll check in on you later, but just FYI:
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
it's the same as any UL WWE edition, Middle East/Africa on the M7 is just standard .401. edition.
---------- Post added at 01:52 PM ---------- Previous post was at 01:44 PM ----------
PS: is your baseband and IMEI intact in settings -> about ?
Sent from my HTC One using Tapatalk

nkk71 said:
I'll check in on you later, but just FYI:
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
it's the same as any UL WWE edition, Middle East/Africa on the M7 is just standard .401. edition.
---------- Post added at 01:52 PM ---------- Previous post was at 01:44 PM ----------
PS: is your baseband and IMEI intact in settings -> about ?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Just another observation ive made, even earlier when I had rooted for the first time, InsertCoin 7 and ViperOne(4.3 based) gave me this same issue. I just randomly chose some options in Aroma nd got InsertCoin to work.
But ARHD ALWAYS WORKED. FIRST SHOT
Is there something wrong with my phone, because ARHD has a 100% success rate fr me, but other ROMs don't. Or are there some different instructions for other Sense ROMs?
Im currently on ARHD 52, SuperCid, S-OFF, HBOOT 1.56, TWRP 2.6.3.3 and OS version in the bootloader is 4.19.401.8

raghav kapur said:
Just another observation ive made, even earlier when I had rooted for the first time, InsertCoin 7 and ViperOne(4.3 based) gave me this same issue. I just randomly chose some options in Aroma nd got InsertCoin to work.
But ARHD ALWAYS WORKED. FIRST SHOT
Is there something wrong with my phone, because ARHD has a 100% success rate fr me, but other ROMs don't. Or are there some different instructions for other Sense ROMs?
Im currently on ARHD 52, SuperCid, S-OFF, HBOOT 1.56, TWRP 2.6.3.3 and OS version in the bootloader is 4.19.401.8
Click to expand...
Click to collapse
Same setup as yours: ARHD 52.0, TWRP 2.6.3.3, fw 4.19.401.8 (from vomer):
1- I just tried OTG cable + 64GB stick (tried both exFat and FAT32), worked fine in TWRP 2.6.3.3 (obviously need to mount it first, which took about 2 to 3 seconds until the check-mark appeared), then in twrp -> advanced -> file manager -> "usb-otg" and files were there.
2- if you're flashing 4.3 ROMs, have you tried a different recovery (or at least version)... if i remember correctly 2.6.3.3 was good for 4.4, but not so good with pre-4.4 (maybe it was twrp 2.6.3.3, maybe some other one, can't remember which one)
3- i would recommend you manually wipe dalvik+cache+data before flashing a different ROM and after successful install wipe dalvik+cache, maybe the installer script isn't doing it automatically.... i know it's a bit redundant, but you never know.

nkk71 said:
Same setup as yours: ARHD 52.0, TWRP 2.6.3.3, fw 4.19.401.8 (from vomer):
1- I just tried OTG cable + 64GB stick (tried both exFat and FAT32), worked fine in TWRP 2.6.3.3 (obviously need to mount it first, which took about 2 to 3 seconds until the check-mark appeared), then in twrp -> advanced -> file manager -> "usb-otg" and files were there.
2- if you're flashing 4.3 ROMs, have you tried a different recovery (or at least version)... if i remember correctly 2.6.3.3 was good for 4.4, but not so good with pre-4.4 (maybe it was twrp 2.6.3.3, maybe some other one, can't remember which one)
3- i would recommend you manually wipe dalvik+cache+data before flashing a different ROM and after successful install wipe dalvik+cache, maybe the installer script isn't doing it automatically.... i know it's a bit redundant, but you never know.
Click to expand...
Click to collapse
1) Hmm i guess i didnt mount it. Probably explains why I couldnt see it
2) The ROMs which im flashing are ALL KitKat based. I guess the issue isn't with the recovery
3) Hmm. I definitely didn't do that. That explains the problem i guess. I used 2 manually wipe on my old Galaxy Y. I got lazy after Aroma installers on this phone
Thanks a lot )
Update: Yeah, the wipe did the trick
Ur a life saver

raghav kapur said:
2) The ROMs which im flashing are ALL KitKat based. I guess the issue isn't with the recovery
Update: Yeah, the wipe did the trick
Ur a life saver
Click to expand...
Click to collapse
no problem, if you still encounter problems (even with 4.4), try a different recovery (or version, eg 2.6.3.4), not all installer scripts (even the 4.4 ones), are written the same.

Having an issue with S-Off. Help please?

I did a stupid thing: I unlocked my AT&T m7 (which I thought also made it S-OFF). I then installed a recovery and wiped the phone. After CM11 wouldn't install I realized that the phone was still S-ON. I have no OS on it to boot into. Any ideas on how I can get an HTC ROM on there so I can run the revone and grant it S-OFF? Thanks in advance!
Adam

niphoet said:
I did a stupid thing: I unlocked my AT&T m7 (which I thought also made it S-OFF). I then installed a recovery and wiped the phone. After CM11 wouldn't install I realized that the phone was still S-ON. I have no OS on it to boot into. Any ideas on how I can get an HTC ROM on there so I can run the revone and grant it S-OFF? Thanks in advance!
Adam
Click to expand...
Click to collapse
Well if you have a custom recovery, just flash any rom. Or did I misunderstand something?

aooga said:
Well if you have a custom recovery, just flash any rom. Or did I misunderstand something?
Click to expand...
Click to collapse
I can't transfer a ROM (CM11, Viper, etc) to the device. I can't get ADB sideload to work. I've installed the universal adb drivers and no dice.

niphoet said:
I can't transfer a ROM (CM11, Viper, etc) to the device. I can't get ADB sideload to work. I've installed the universal adb drivers and no dice.
Click to expand...
Click to collapse
Ah okay. When you connect your phone to your computer in recovery, what does "adb devices" give you? Nothing?

aooga said:
Ah okay. When you connect your phone to your computer in recovery, what does "adb devices" give you? Nothing?
Click to expand...
Click to collapse
Correct, I get nothing.

niphoet said:
Correct, I get nothing.
Click to expand...
Click to collapse
If even after re-flashing the TWRP.img it doesn't work, I would just do an RUU and go from there. Bad thing about not having an SD card slot

aooga said:
If even after re-flashing the TWRP.img it doesn't work, I would just do an RUU and go from there. Bad thing about not having an SD card slot
Click to expand...
Click to collapse
I've tried RUU but it keeps failing. Can you recommend a specific RUU to try?

niphoet said:
I've tried RUU but it keeps failing. Can you recommend a specific RUU to try?
Click to expand...
Click to collapse
Do you have Super cid or still the att one?

aooga said:
Do you have Super cid or still the att one?
Click to expand...
Click to collapse
I've tried:
RUU_M7_UL_JB_50_Cingular.exe
---and---
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe

niphoet said:
I've tried:
RUU_M7_UL_JB_50_Cingular.exe
---and---
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe
Click to expand...
Click to collapse
This one seems to work for everyone I give it to.
http://androidruu.com/getdownload.p...13_10.38j.1157.04_release_334235_signed_2.exe

aooga said:
This one seems to work for everyone I give it to.
http://androidruu.com/getdownload.p...13_10.38j.1157.04_release_334235_signed_2.exe
Click to expand...
Click to collapse
I'll try it and report back in the morning. Thanks for all the help so far!

niphoet said:
I'll try it and report back in the morning. Thanks for all the help so far!
Click to expand...
Click to collapse
Sure.
---------- Post added at 08:57 PM ---------- Previous post was at 08:54 PM ----------
niphoet said:
I'll try it and report back in the morning. Thanks for all the help so far!
Click to expand...
Click to collapse
Just to let you know, that rom is pretty old. You'll need to do some updating. If you don't want to do that, you can also download this one :
DOWNLOAD
But it might not work. It's worth a try though.

aooga said:
Sure.
---------- Post added at 08:57 PM ---------- Previous post was at 08:54 PM ----------
Just to let you know, that rom is pretty old. You'll need to do some updating. If you don't want to do that, you can also download this one :
DOWNLOAD
But it might not work. It's worth a try though.
Click to expand...
Click to collapse
Neither of those worked. Here is the error I get: Link.
I guess my next step is to try to find my otg cable and try to load a rom from there, right?
------
EDIT:
I managed to get adb working in recovery using a 32-bit VM (I now remember the problems I've had in the past with x64 and adb). I installed Viper, used rumrunner to achieve S-OFF. I am still unable to flash cm11. PhilZ/CWM gives me Status 0 and TWRP just says failed. Any idea what my next step should be?
ANOTHER EDIT:
Okay, I'm able to install an older m7att build but i can't install any of the unified m7 roms.

Have you got fastboot working?
http://koush.com/post/universal-adb-driver
Read here...
http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Post a fastboot getvar all when working
Sent from my Nexus 7 using XDA Premium 4 mobile app

niphoet said:
Neither of those worked. Here is the error I get: Link.
I guess my next step is to try to find my otg cable and try to load a rom from there, right?
------
EDIT:
I managed to get adb working in recovery using a 32-bit VM (I now remember the problems I've had in the past with x64 and adb). I installed Viper, used rumrunner to achieve S-OFF. I am still unable to flash cm11. PhilZ/CWM gives me Status 0 and TWRP just says failed. Any idea what my next step should be?
ANOTHER EDIT:
Okay, I'm able to install an older m7att build but i can't install any of the unified m7 roms.
Click to expand...
Click to collapse
You should be able to install any rom. Try flashing TWRP again? Whats the exact error in TWRP.

bored_stupid said:
Have you got fastboot working?
http://koush.com/post/universal-adb-driver
Read here...
http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Post a fastboot getvar all when working
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT36LW912065
(bootloader) imei: 354439051648014
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4322mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.240s
aooga said:
You should be able to install any rom. Try flashing TWRP again? Whats the exact error in TWRP.
Click to expand...
Click to collapse
I tried TWRP 2.6.3.3 and 2.7.0.0. Here is the error in TWRP: Link
EDIT: See this. Under the section "Recovery Update" I flashed the unofficial TWRP 2.7.0.8 and it flashed the latest nightly. I guess I'm good to go now. Thanks to all for all of the help!!

niphoet said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
......!!
Click to expand...
Click to collapse
Just to let you know, the error when it says "Too many links" happens when you use a USB 3 port. Android and adb don't play very nice with usb 3.

Accidentally erased operating system on HTC One M7

Hi, i run an HTC One M7 that was originally from AT&T. I unlocked it and use it in my country. Few days ago i wanted to install the stock Android and try it. I did everything as was said - unlocked the bootloader, s-off, recovery etc. after a few hours of the stock Android experience i wanted to change it to ARHD. As i changed it a question popped out asking if i want to root my device. I answered "yes", not knowing what it means. My phone was bricked and stuck on the HTC welcome screen since yesterday. I tried a lot of differend ways of fixing it and still no results. I locked and unlocked the bootloader again, tried to install the official RUU, but it doesn't want to. I get MTP driver error when connecting to my computer.
I have "can't mount SD card" on my phone. I'm pretty desperate, but i want to fix this issue and get back my phone. This will be a lesson for me.

Skyrocker94 said:
Hi, i run an HTC One M7 that was originally from AT&T. I unlocked it and use it in my country. Few days ago i wanted to install the stock Android and try it. I did everything as was said - unlocked the bootloader, s-off, recovery etc. after a few hours of the stock Android experience i wanted to change it to ARHD. As i changed it a question popped out asking if i want to root my device. I answered "yes", not knowing what it means. My phone was bricked and stuck on the HTC welcome screen since yesterday. I tried a lot of differend ways of fixing it and still no results. I locked and unlocked the bootloader again, tried to install the official RUU, but it doesn't want to. I get MTP driver error when connecting to my computer.
I have "can't mount SD card" on my phone. I'm pretty desperate, but i want to fix this issue and get back my phone. This will be a lesson for me.
Click to expand...
Click to collapse
post your fastboot getvar all minus the serial no and IMEI so we can find the files you'll need to restore you phone

clsA said:
post your fastboot getvar all minus the serial no and IMEI so we can find the files you'll need to restore you phone
Click to expand...
Click to collapse
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: --------------------
(bootloader) imei: -------------------------
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.120s
Here we go! thanks a lot!!

Skyrocker94 said:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: --------------------
(bootloader) imei: -------------------------
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.120s
Here we go! thanks a lot!!
Click to expand...
Click to collapse
download this ruu and run it, its the same version you already have / had on your phone, if you bootloader is unlocked then you will need to re-lock it first.
http://www.htc1guru.com/dld/ruu_m7_...9_10-26-1718-01l_release_356565_signed_2-exe/
with regards to your drivers problem, see FAQ 2 here: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2

Thanks a ton!!! i hope it works!!!

Skyrocker94 said:
Thanks a ton!!! i hope it works!!!
Click to expand...
Click to collapse
fastboot oem lock
relocks the bootloader to run the RUU
if you have problems with the RUU
try this / unlocking the bootloader / flashing TWRP 2.6.3.3 and sideload this Guru Reset >> http://www.androidfilehost.com/?fid=23501681358545274

It worked. Thank you very much!
"Ask and it shall be given to you"

same issue here, no more SO and stuck in HTC log
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.27.3218.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__402
INFObattery-status: good
INFObattery-voltage: 4102mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-1f512bb6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Thanks a lot for help, sorry for my English.

vanito said:
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
Thanks a lot for help, sorry for my English.
Click to expand...
Click to collapse
another H3G__402 you need help from @Danny201281
he has the same phone

vanito said:
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
Thanks a lot for help, sorry for my English.
Click to expand...
Click to collapse
Well I'm H3G__001 UK. H3G__402 is Italy right? Not that it makes a difference the software is all the same.
Unfortunately there is no ruu for H3G. What exactly happened with your phone it can hopefully be fixed without the need for an ruu.
Bad flash, wiped your os? Can you access bootloader or recovery?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk

Danny201281 said:
Well I'm H3G__001 UK. H3G__402 is Italy right? Not that it makes a difference the software is all the same.
Unfortunately there is no ruu for H3G. What exactly happened with your phone it can hopefully be fixed without the need for an ruu.
Bad flash, wiped your os? Can you access bootloader or recovery?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
this phone was w/o SO since i've buyed of 2 handle. was installed only a Custom Rom. i want make it S-OFF for installl anythingh for error from TWRP have done advanced wipe and have erase also this Rom whith all partition and BKP.
Phone enter in Recovery, hboot, fastboot and can flash RUU signed, (have tried with an BOX to flash Guru reset but Error becouse No signature), or if you have other Rom or other for fix this issue and after i want make S-OFF for change this Bad cid, if can help me please

vanito said:
this phone was w/o SO since i've buyed of 2 handle. was installed only a Custom Rom. i want make it S-OFF for installl anythingh for error from TWRP have done advanced wipe and have erase also this Rom whith all partition and BKP.
Phone enter in Recovery, hboot, fastboot and can flash RUU signed, (have tried with an BOX to flash Guru reset but Error becouse No signature), or if you have other Rom or other for fix this issue and after i want make S-OFF for change this Bad cid, if can help me please
Click to expand...
Click to collapse
Hi and sorry for the delayed reply, as I say there is no ruu for h3g, but it sounds as if you just need to push a compatible Rom to the phone, what is you current version of TWRP.
I do have some h3g stock nandroids, one for jb 4.3 and one for kk 4.4.2. I'll need to upload them for you and I can't do that until later this evening as I'm in work now. If you want to go s-off the jb 4.3 nandroid has worked for me everytime so would be worth a try. I'll upload it tonight and send you a link as soon as it's available.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk

You're such a nice and friendly forum mate, @Danny201281
tetakpatalked from Nexus 7 flo

Danny201281 said:
Hi and sorry for the delayed reply, as I say there is no ruu for h3g, but it sounds as if you just need to push a compatible Rom to the phone, what is you current version of TWRP.
I do have some h3g stock nandroids, one for jb 4.3 and one for kk 4.4.2. I'll need to upload them for you and I can't do that until later this evening as I'm in work now. If you want to go s-off the jb 4.3 nandroid has worked for me everytime so would be worth a try. I'll upload it tonight and send you a link as soon as it's available.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
Not worry, important i can fix with you help this problem.
My version of TWRP installed now is "twrp-2.7.1.0a-m7" this device first of i Erase all had installed an VENOM Rom, not remember wich ViperOnes version, my Getvar All you have seen, i want listen to you becouse not understand good about these HTC w/o sd card.
If you can send to me this nandroid jb 4.3 and if please write also if i can flash how normal rom/Ruu or how do.... you help is very good for me :good:
wait for you link to download, please if cannot use Mega.co is good becouse here is blocked and impossible open this, Ciao:good:

vanito said:
Not worry, important i can fix with you help this problem.
My version of TWRP installed now is "twrp-2.7.1.0a-m7" this device first of i Erase all had installed an VENOM Rom, not remember wich ViperOnes version, my Getvar All you have seen, i want listen to you becouse not understand good about these HTC w/o sd card.
If you can send to me this nandroid jb 4.3 and if please write also if i can flash how normal rom/Ruu or how do.... you help is very good for me :good:
wait for you link to download, please if cannot use Mega.co is good becouse here is blocked and impossible open this, Ciao:good:
Click to expand...
Click to collapse
Ok sorry I was very busy last night. I am on this for you now, I'll post link as soon as it's ready but my upload seed is very poor
I created this nandroid using TWRP 2.6.3.3 but it should restore fine using other versions of TWRP.
Do you have adb working when in recovery mode? You will need it to push the nandroid to the device.

Danny201281 said:
Ok sorry I was very busy last night. I am on this for you now, I'll post link as soon as it's ready but my upload seed is very poor
I created this nandroid using TWRP 2.6.3.3 but it should restore fine using other versions of TWRP.
Do you have adb working when in recovery mode? You will need it to push the nandroid to the device.
Click to expand...
Click to collapse
Hello, can leave this version of TWRP: "twrp-2.7.1.0a-m7", that i've or you can suggest another version?
System not Mount, i've tryed to push in fastbootRUU but fail anythinghs i want push.
I've tryed putting phone in Recovery mode and i can see from "device manager" that have "adb android" or similar then if open can see "My Htc", if i put in normal mode, (is w/o Boot.img), i can see MTP that install/uninstall and phone how "Cd Unit external", (cannot open).
Not warry where upload it, important not use Mega.co becouse in Italy is Blocked, any other site is ok.
Please can send to me also Command for Push this Nandroid 4.3 in Recovery mode?, (i've also one dongle + sw but for Flash anythinghs requiere fastboot RUU mode), anyway i'm looking forward this Nandroid Bkp and how push in phone hooping that i can fix the phone

@vanito backup done with TWRP 2.6.3.3 is compatible with 2.7.1.0
He is asking you about ADB and using command line of your PC to push the files. Do you know how to do it? Do you have SDK installed on your PC?
tetakpatalked from N7100

vanito said:
Hello, can leave this version of TWRP: "twrp-2.7.1.0a-m7", that i've or you can suggest another version?
System not Mount, i've tryed to push in fastbootRUU but fail anythinghs i want push.
I've tryed putting phone in Recovery mode and i can see from "device manager" that have "adb android" or similar then if open can see "My Htc", if i put in normal mode, (is w/o Boot.img), i can see MTP that install/uninstall and phone how "Cd Unit external", (cannot open).
Not warry where upload it, important not use Mega.co becouse in Italy is Blocked, any other site is ok.
Please can send to me also Command for Push this Nandroid 4.3 in Recovery mode?, (i've also one dongle + sw but for Flash anythinghs requiere fastboot RUU mode), anyway i'm looking forward this Nandroid Bkp and how push in phone hooping that i can fix the phone
Click to expand...
Click to collapse
twrp 2.7.1.0 should work fine :good:
adb will only work in recovery mode. Put phone in recovery and connect usb. Then in the adb/fastboot command line type
Code:
adb devices
You should see an output of your phone's serial no. If you did it's working. You can test adb push with a Rom if you have one. Rename the Rom file to "rom.zip" and put it in your adb/fastboot folder. Then in the command line type
Code:
adb push rom.zip /sdcard
The push will take several minutes the command window will be unresponsive until it's done. When it's finished the push you should be able to Install the Rom using TWRP.
P.S. The stock nandroid is uploading to dropbox. This is ok for use in Italy?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk

@vanito you have got a real little guide for Windows by @Danny201281
In the case that you are a Linux user, it works just slightly different: in such case check my little thread about running fastboot & ADB in Ubuntu. It is posted in the Nexus 7 section but ADB works for Samsung just the same way.
tetakpatalked from Nexus 7 flo

Danny201281 said:
twrp 2.7.1.0 should work fine :good:
adb will only work in recovery mode. Put phone in recovery and connect usb. Then in the adb/fastboot command line type
Code:
adb devices
You should see an output of your phone's serial no. If you did it's working. You can test adb push with a Rom if you have one. Rename the Rom file to "rom.zip" and put it in your adb/fastboot folder. Then in the command line type
Code:
adb push rom.zip /sdcard
The push will take several minutes the command window will be unresponsive until it's done. When it's finished the push you should be able to Install the Rom using TWRP.
P.S. The stock nandroid is uploading to dropbox. This is ok for use in Italy?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
@Danny201281, ok i have this twrp 2.7.1.0 also and can install replace the other one i've installed:good:
Yes i've installed adb&fastboot in C: (principal directory), i use Win7 32 bit and can use also win Xp in the 2 pcs i've adb&fastboot installed.:good:
Yes, i know a little about use of these adb or fastboot, specific command for this case i can copy from this you good guide:good:
I've tested pushing "guru reset..." from fastboot yesterday but have get one Error 24, not have tested pushing via Adb command, but now i see you command above and can test this.
Sorry, i not know which Rom can push and if you can advise me about wich push is big help, (if you can post only link to Rom) for me, if possible any Rom for to make S-Off after that i fix this phone.
Yes, Dropbox i can use here if you give me access for download the Nandroid Bkp 4.3.
Last question, if push of Rom goes all ok, after i open phone in recovery and find this Rom in Sd Card, right?...then from "Install>Sd Card>Rom" swipe and will be installed right?
Ok, after i install this Rom always from recovery can install you nondroid bkp 4.3, ok?, :good:
I'm ready if can send to me link for this Rom and Link of dropbox i want try to ceck anythinghs.

Bricked HTC One or hardware problem? S-ON, UNLOCKED.

Hello, my phone was booting to bootloader, or to CWM recovery only.
i think there is some hardvare error because recovery cant mount any partitions.. but it can be some kind of BRICK. here is what i have in my phone.:
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
and here is getvar:
PHP:
getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT34HW91****
(bootloader) imei: 35443**********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3776mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.043s
ive get it like this, but with error message "Active Cmdline Overflow" and fixed it by using this guide,, than my phone started to boot but it boots infinitely a.k.a. hang on white HTC POWERED BY ANDROID logo... thats all iwe goot...
i have tried to flash this stock RUU.exe
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
but it always end up with ERROR that this is wrong ruu file... but CID in GETVAR shows HTC__001 so this firmware fits...
i still can enter or flash recovery, now im on CWM v6.0.2.8
when im tryin for egsample WIPE DATA i get many errors like this:
PHP:
-- Wipping data...
Formatting /data
Error mounting /data!
Skipping format. . .
Formatting /cache...
Formatting /sd-ex...
Formatting /sdcard/ .android_secure!
Error mounting /sdcard/ .android_secure!
Skipping format...
Data wipe complete.
and i cant change my cid to supercid 11111111 i get some king of java card error... maybe because im S-On..
any help?

It looks like the ruu you are trying to flash is an older version than what is on your phone. Only way to downgrade is with s-off.
If you are on 6.x.x.x firmware, I don't think there is an ruu out yet for s-on phones.
Have you tried flashing stock recovery img and factory reset? It sounds like your partitions are messed up. I don't know if a stock recovery reset will fix that issue, but it is worth a shot. Only other method to fix partition errors is with an ruu
Sent from my HTC6500LVWBLU using XDA Free mobile app

Uzephi said:
It looks like the ruu you are trying to flash is an older version than what is on your phone. Only way to downgrade is with s-off.
If you are on 6.x.x.x firmware, I don't think there is an ruu out yet for s-on phones.
Have you tried flashing stock recovery img and factory reset? It sounds like your partitions are messed up. I don't know if a stock recovery reset will fix that issue, but it is worth a shot. Only other method to fix partition errors is with an ruu
Sent from my HTC6500LVWBLU using XDA Free mobile app
Click to expand...
Click to collapse
ok, i search an internet for what OS version i have because i dont know, not bootloader screen nor getvar showed it,
but depending on what RADIO and HBOOT and CID i have,
i find out that my os version should be 5.11.401.10
so i downloaded stock recovery for this and flashed,, and done a factory reset,,,
But nothing changed at all, only recovery..
i still have same bootloader and getvar results..
what more i should try ?
by the way, i cant s-off becaue my phone wont boot OS,, it shows that there is no os,,

If you are on 5.11.401.10, have you tried finding an ruu for that version? It seems that is your only hope.
Sent from my HTC6500LVWBLU using XDA Free mobile app

Uzephi said:
If you are on 5.11.401.10, have you tried finding an ruu for that version? It seems that is your only hope.
Sent from my HTC6500LVWBLU using XDA Free mobile app
Click to expand...
Click to collapse
find out only .zip so far, but its OTA zip. i dont even know how to flash ota zips when im s-on... so since this is OTA there is no chance to get an .exe ....?
EDIT. it seems that i was trying to flash .zip tht ws only less than 100mb, now i find out OTA almost 700mb zipped.. ok will download and try now...
http://www.htc1guru.com/dld/ota_m7_...19-401-11_release_372404wj19h95c0x6oa19n-zip/

Uzephi said:
If you are on 5.11.401.10, have you tried finding an ruu for that version? It seems that is your only hope.
Sent from my HTC6500LVWBLU using XDA Free mobile app
Click to expand...
Click to collapse
ok, i cant flash OTA,, i get many errors of cant mount cache... so i need to find how to fix it...
maybe somebody know for what version RUU.exe is this OTA made ? 5.11.401.10 or what ruu.exe can be newer than this ota? so i can try older or newer ruu.exe

dainius87 said:
ok, i cant flash OTA,, i get many errors of cant mount cache... so i need to find how to fix it...
maybe somebody know for what version RUU.exe is this OTA made ? 5.11.401.10 or what ruu.exe can be newer than this ota? so i can try older or newer ruu.exe
Click to expand...
Click to collapse
you can't flash OTAs and there are no RUUs available at the moment above 4.xx, so with S-ON, you can't use RUU.
in either case, if you have now fixed the "Active Cmdline Overflow" error then you need to update recovery.
use TWRP 2.6.3.3 (or possibly 2.8.0.1) and follow instructions here: http://forum.xda-developers.com/showthread.php?t=2228274&page=3
in particular Point D, about truly formatting /data /system and /cache, once you format those, and reboot to recovery, you should be able to access the partitions again, then push or sideload a ROM as mentioned in Point E

nkk71 said:
you can't flash OTAs and there are no RUUs available at the moment above 4.xx, so with S-ON, you can't use RUU.
in either case, if you have now fixed the "Active Cmdline Overflow" error then you need to update recovery.
use TWRP 2.6.3.3 (or possibly 2.8.0.1) and follow instructions here: http://forum.xda-developers.com/showthread.php?t=2228274&page=3
in particular Point D, about truly formatting /data /system and /cache, once you format those, and reboot to recovery, you should be able to access the partitions again, then push or sideload a ROM as mentioned in Point E
Click to expand...
Click to collapse
Done everything except install rom otg... what ROM i have to chose? because i cant install those:
RUU Zip M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.zip
and
OTA_M7_UL_K44_SENSE60_MR_HTC_Europe_5.11.401.10-4.19.401.11_release_372404wj19h95c0x6oa19n.zip
so what file i should chose?

dainius87 said:
Done everything except install rom otg... what ROM i have to chose? because i cant install those:
RUU Zip M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.zip
and
OTA_M7_UL_K44_SENSE60_MR_HTC_Europe_5.11.401.10-4.19.401.11_release_372404wj19h95c0x6oa19n.zip
so what file i should chose?
Click to expand...
Click to collapse
neither, the first one is a decrypted RUU.ZIP which is lower than your current version so you can't flash that
the second is an OTA (Over The Air) update <- an update expect a certain version to already be on the phone, eg you cannot apply a Windows 8.1 patch on Windows XP
get yourself a ROM from: http://forum.xda-developers.com/htc-one#romList
the Development section, General section or wherever, and push it, then install it.
if you just want stock 5.11.401.10, you can find it here: http://forum.xda-developers.com/showthread.php?t=2759000

nkk71 said:
neither, the first one is a decrypted RUU.ZIP which is lower than your current version so you can't flash that
the second is an OTA (Over The Air) update <- an update expect a certain version to already be on the phone, eg you cannot apply a Windows 8.1 patch on Windows XP
get yourself a ROM from: http://forum.xda-developers.com/htc-one#romList
the Development section, General section or wherever, and push it, then install it.
if you just want stock 5.11.401.10, you can find it here: http://forum.xda-developers.com/showthread.php?t=2759000
Click to expand...
Click to collapse
ok, no custom roms vorked until i tested ViperOne, this one worked perfectly,, now i will go back to 100% stok after i will s-off..
thank you!

[Q] Unable to go STOCK or flash other ROMs, adb shows device as offline

Hello xda members.
I'm having some trouble with my device, I did search around this past week but still didnt success in fixing it, hope someone can point me in the right direction.
So I was S-ON with 4.3 - 4.4 on ViperOne for a long time, most of the things worked fine but my 3G was a bit slow/disconnected from time to time.
I though giving a shot to a Lollipop version Sky Dragon. I downloaded and installed Sky Dragon and used it fine for some months, but then when I wanted to use Android Studio for a project my device was not recognized. I manually run adb devices and it would not show my device (debuggin on), tried some search on google but without success.
I though moving back to ViperOne / ARHD (I really missed SENSE) would solve my problem, so downloaded the rom and tried to install but it would always stuck in "formatting partition" process.
I manually put my device in fastboot and run getvar all which resulted in BLANK version-main, very strange.
I did some search but had only few similar cases, I tried to go to STOCK by re-lockocking bootloader, flashing stock firmware but the RUU.exe would always stop at 5% and show "fastboot_htc.exe has stopped working", again did some research but could not find a solution.
When I try to flash custom firmware through fastboot flash zip I will always get "(bootloader) Read zipped android_info fail FAILED (remote: 99 unknown fail)".
I then found a tool to write a version-main into the emmc and after flashing it in TWRP I got a 1.00.000.0 version-main. Tried all of above again with the same results. My device will be recognised as "offline" in adb devices.
Luckily I have some backups (viperone 4.3 and skydragon) that work fine except that I cant update and cant connect via adb.
I have outputted my getvar all, let me know if you need further info for my case.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.0
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxx
(bootloader) imei: xxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3976mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
What can you suggest me?
Thanks a lot guys, and sorry for the long story!

mindxpert said:
Hello xda members.
I'm having some trouble with my device, I did search around this past week but still didnt success in fixing it, hope someone can point me in the right direction.
So I was S-ON with 4.3 - 4.4 on ViperOne for a long time, most of the things worked fine but my 3G was a bit slow/disconnected from time to time.
I though giving a shot to a Lollipop version Sky Dragon. I downloaded and installed Sky Dragon and used it fine for some months, but then when I wanted to use Android Studio for a project my device was not recognized. I manually run adb devices and it would not show my device (debuggin on), tried some search on google but without success.
Click to expand...
Click to collapse
Update your driver to latest HTC drivers
Update you android SDK to latest version
I though moving back to ViperOne / ARHD (I really missed SENSE) would solve my problem, so downloaded the rom and tried to install but it would always stuck in "formatting partition" process.
Click to expand...
Click to collapse
What recovery version is installed on the phone?
I manually put my device in fastboot and run getvar all which resulted in BLANK version-main, very strange.
Click to expand...
Click to collapse
Not really, its a normal issue everyone get when using some twrp versions.
I did some search but had only few similar cases, I tried to go to STOCK by re-lockocking bootloader, flashing stock firmware but the RUU.exe would always stop at 5% and show "fastboot_htc.exe has stopped working", again did some research but could not find a solution.
Click to expand...
Click to collapse
Make sure to uninstall HTC Sync from your computer. Keep the drivers installed but uninstall HTC Sync. You are not giving any info about what ruu you are trying to flash but afaik, there is none you can use for this phone with s-on.
When I try to flash custom firmware through fastboot flash zip I will always get "(bootloader) Read zipped android_info fail FAILED (remote: 99 unknown fail)".
Click to expand...
Click to collapse
You can not flash custom firmware when S-ON...
I then found a tool to write a version-main into the emmc and after flashing it in TWRP I got a 1.00.000.0 version-main. Tried all of above again with the same results. My device will be recognised as "offline" in adb devices.
Click to expand...
Click to collapse
Having the version-main blank is not an issue preventing your phone to work properly, its only an aesthetic issue. The version-main can be restored by flashed the stock firmware back.

alray said:
Update your driver to latest HTC drivers
Update you android SDK to latest version
Click to expand...
Click to collapse
Already have the latest SDK version.
alray said:
What recovery version is installed on the phone?
Click to expand...
Click to collapse
I'm using TWRP 2.8.5.0
alray said:
Make sure to uninstall HTC Sync from your computer. Keep the drivers installed but uninstall HTC Sync. You are not giving any info about what ruu you are trying to flash but afaik, there is none you can use for this phone with s-on.
Click to expand...
Click to collapse
I found from my CID that this might be compatible RUU_M7_UL_K44_SENSE55_MR_Rogers_WWE_4.19.631.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_351317_signed_2.exe
alray said:
You can not flash custom firmware when S-ON...
Click to expand...
Click to collapse
So should I go S-OFF before? I'm not sure if I can downgrade and S-OFF in the current condition.
alray said:
Having the version-main blank is not an issue preventing your phone to work properly, its only an aesthetic issue. The version-main can be restored by flashed the stock firmware back.
Click to expand...
Click to collapse
Thank you for the clarification

mindxpert said:
Already have the latest SDK version.
Click to expand...
Click to collapse
And latest HTC drivers? Your phone should be visible from "my computer" when booted in twrp 2.8.5.0 cause twrp now have mtp support.
Code:
I found from my CID that this might be compatible RUU_M7_UL_K44_SENSE55_MR_Rogers_WWE_4.19.631.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_351317_signed_2.exe
Not with s-on. 4.19.631.9 is a downgrade, you need s-off to downgrade.
So should I go S-OFF before? I'm not sure if I can downgrade and S-OFF in the current condition.
Click to expand...
Click to collapse
You can go s-off using sunshine s-off but it cost 25$ or you can flash other roms by fixing your adb issues.

alray said:
And latest HTC drivers? Your phone should be visible from "my computer" when booted in twrp 2.8.5.0 cause twrp now have mtp support.
Click to expand...
Click to collapse
Yes my device is visible when in recovery.
alray said:
I found from my CID that this might be compatible RUU_M7_UL_K44_SENSE55_MR_Rogers_WWE_4.19.631.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_351317_signed_2.exe
Not with s-on. 4.19.631.9 is a downgrade, you need s-off to downgrade.
You can go s-off using sunshine s-off but it cost 25$ or you can flash other roms by fixing your adb issues.
Click to expand...
Click to collapse
I used sunshine to s-off my device. Currently downloading files from your signature post which had a case with my CID and MID to return stock then update firmware/rom,
Thanks, will report back tomorrow.