Hi guys,
My HTC One fails to run any Kitkat Sense-based ROM. Ive tried ViperOne 5.5.1 and InsertCoin 8.1
The ROM installs properly (I wiped the data in Aroma). But during bootup, the htc dialer process asks me to wait or cancel.
If I choose to Wait, then the ROM will manage to enter half the setup process. But it will continue rebooting and rebooting. Also, when I cancelled most of the setup options, the ROM had no SIM access. It showed 'Emergency Calls Only'
The problem is identical in ViperOne and InsertCoin.
Here's my getvar all:
But Cyanogenmod is working PERFECTLY
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4071mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
I guess that the 4.4 firmware is required ?? Do I need to flash that?? Or is the problem anything else?? I appreciate any help
Thank you
Try to SuperCID. Maybe that'll work cause I see you're s-offed
Happy Flashing Sent from a proud owner of the HTC One.
You can try extracting the boot.img and flashing it.
Sent from my HTC One using Tapatalk
Flash Kitkat firmware.zip and try again. Do not s-on or lock bootloader
sent from my mobile device
SaHiLzZ said:
Flash Kitkat firmware.zip and try again. Do not s-on or lock bootloader
sent from my mobile device
Click to expand...
Click to collapse
Thanks a lot. Just to re-verify, I've to do what it sAYs in this link right:
http://forum.xda-developers.com/showthread.php?t=2485651
raghav kapur said:
Thanks a lot. Just to re-verify, I've to do what it sAYs in this link right:
http://forum.xda-developers.com/showthread.php?t=2485651
Click to expand...
Click to collapse
got SuperCid and flashed the KitKat firmware zip with OS version as 4.19.401.8 and hboot 1.56
no luck :'(
Status quo
Any ideas ??
Flash a full .401.7 RUU and update all the way through to kit Kat official. No other ideas at the moment.
sent from my mobile device
SaHiLzZ said:
Flash a full .401.7 RUU and update all the way through to kit Kat official. No other ideas at the moment.
sent from my mobile device
Click to expand...
Click to collapse
My region (Middle East and Africa) hasn't rolled out 4.4 yet :/
I think ill continue with CM till I find a solution of some sort
raghav kapur said:
got SuperCid and flashed the KitKat firmware zip with OS version as 4.19.401.8 and hboot 1.56
no luck :'(
Status quo
Any ideas ??
Click to expand...
Click to collapse
what recovery do you have? if you don't already have it, try TWRP 2.6.3.3
cr1960 said:
what recovery do you have? if you don't already have it, try TWRP 2.6.3.3
Click to expand...
Click to collapse
I already have 2.6.3.3. My phone is currently on a perfectly working CM11 M4. But for some reason, my USB OTG is not working in TWRP
It shows a blank directory. Got any ideas??
Thanks
raghav kapur said:
My region (Middle East and Africa) hasn't rolled out 4.4 yet :/
I think ill continue with CM till I find a solution of some sort
Click to expand...
Click to collapse
I'll check in on you later, but just FYI:
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
it's the same as any UL WWE edition, Middle East/Africa on the M7 is just standard .401. edition.
---------- Post added at 01:52 PM ---------- Previous post was at 01:44 PM ----------
PS: is your baseband and IMEI intact in settings -> about ?
Sent from my HTC One using Tapatalk
nkk71 said:
I'll check in on you later, but just FYI:
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
it's the same as any UL WWE edition, Middle East/Africa on the M7 is just standard .401. edition.
---------- Post added at 01:52 PM ---------- Previous post was at 01:44 PM ----------
PS: is your baseband and IMEI intact in settings -> about ?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Just another observation ive made, even earlier when I had rooted for the first time, InsertCoin 7 and ViperOne(4.3 based) gave me this same issue. I just randomly chose some options in Aroma nd got InsertCoin to work.
But ARHD ALWAYS WORKED. FIRST SHOT
Is there something wrong with my phone, because ARHD has a 100% success rate fr me, but other ROMs don't. Or are there some different instructions for other Sense ROMs?
Im currently on ARHD 52, SuperCid, S-OFF, HBOOT 1.56, TWRP 2.6.3.3 and OS version in the bootloader is 4.19.401.8
raghav kapur said:
Just another observation ive made, even earlier when I had rooted for the first time, InsertCoin 7 and ViperOne(4.3 based) gave me this same issue. I just randomly chose some options in Aroma nd got InsertCoin to work.
But ARHD ALWAYS WORKED. FIRST SHOT
Is there something wrong with my phone, because ARHD has a 100% success rate fr me, but other ROMs don't. Or are there some different instructions for other Sense ROMs?
Im currently on ARHD 52, SuperCid, S-OFF, HBOOT 1.56, TWRP 2.6.3.3 and OS version in the bootloader is 4.19.401.8
Click to expand...
Click to collapse
Same setup as yours: ARHD 52.0, TWRP 2.6.3.3, fw 4.19.401.8 (from vomer):
1- I just tried OTG cable + 64GB stick (tried both exFat and FAT32), worked fine in TWRP 2.6.3.3 (obviously need to mount it first, which took about 2 to 3 seconds until the check-mark appeared), then in twrp -> advanced -> file manager -> "usb-otg" and files were there.
2- if you're flashing 4.3 ROMs, have you tried a different recovery (or at least version)... if i remember correctly 2.6.3.3 was good for 4.4, but not so good with pre-4.4 (maybe it was twrp 2.6.3.3, maybe some other one, can't remember which one)
3- i would recommend you manually wipe dalvik+cache+data before flashing a different ROM and after successful install wipe dalvik+cache, maybe the installer script isn't doing it automatically.... i know it's a bit redundant, but you never know.
nkk71 said:
Same setup as yours: ARHD 52.0, TWRP 2.6.3.3, fw 4.19.401.8 (from vomer):
1- I just tried OTG cable + 64GB stick (tried both exFat and FAT32), worked fine in TWRP 2.6.3.3 (obviously need to mount it first, which took about 2 to 3 seconds until the check-mark appeared), then in twrp -> advanced -> file manager -> "usb-otg" and files were there.
2- if you're flashing 4.3 ROMs, have you tried a different recovery (or at least version)... if i remember correctly 2.6.3.3 was good for 4.4, but not so good with pre-4.4 (maybe it was twrp 2.6.3.3, maybe some other one, can't remember which one)
3- i would recommend you manually wipe dalvik+cache+data before flashing a different ROM and after successful install wipe dalvik+cache, maybe the installer script isn't doing it automatically.... i know it's a bit redundant, but you never know.
Click to expand...
Click to collapse
1) Hmm i guess i didnt mount it. Probably explains why I couldnt see it
2) The ROMs which im flashing are ALL KitKat based. I guess the issue isn't with the recovery
3) Hmm. I definitely didn't do that. That explains the problem i guess. I used 2 manually wipe on my old Galaxy Y. I got lazy after Aroma installers on this phone
Thanks a lot )
Update: Yeah, the wipe did the trick
Ur a life saver
raghav kapur said:
2) The ROMs which im flashing are ALL KitKat based. I guess the issue isn't with the recovery
Update: Yeah, the wipe did the trick
Ur a life saver
Click to expand...
Click to collapse
no problem, if you still encounter problems (even with 4.4), try a different recovery (or version, eg 2.6.3.4), not all installer scripts (even the 4.4 ones), are written the same.
Related
Oke guys,
I probally did one of the most stupid things. Got my One transformed tot a GPE 4.3 version works smooth. Yesterday an OTA update to 4.4 really messed up my day. Try to install everything gone....No i am not able to install any version at al.
Got the last version of TWRP installed. got myself an unlocked bootloader even an 4.3 GPE rom. But TWRP keeps giving me the message "Error flashing zip: 'sdcard/<M7_UL_JB443_STOCK_UI.
can someone help me solve this problem..
For 4.3 Roms you need twrp 2.6.3.0 and not 2.6.3.3.
Flash it and let us know
Sent from my HTC One using Tapatalk
Ivanovic said:
For 4.3 Roms you need twrp 2.6.3.0 and not 2.6.3.3.
Flash it and let us know
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thans for you answer. I now got another one. "Unable to mount /data
unable to mount internal storage
I'm also not able to mount then by the menu.
Why do you need to mount internal storage?
Sent from my HTC One using Tapatalk
After installing the right twrp version. i use ADB to push the image.zip to my phone. Then i use twrp install and browse to my sdcard where the image.zip is transferred to. when i click it it gives that error. By the way he also starts with error flashing zip.
Comlete error is:
Error flashing zip '/sdcard/M7_UL_JB43..
updating partition details
e:unable to mount /data
e: unable to mount internal storage
i fear for my device...
Please anyone who can help me?
what about to boot to Bootloader, connect to some tools like Hasoon2000 Toolkits (cannot post links yet, sorry) and format everything you got, than flash the recovery again and push the rom via adb
make sure you download rom without any downloader
do not worry, i bricked my one the same day i got it and took me two nights to make it work again it needs lot of trying and searching but eventually you fix it
Thanks for your reply, i flashed everything a couple times. I guess is have the right rom. i do worry cause i tried so many things. Thinking about sending in my phone to HTC today..
lenneej said:
Thanks for your reply, i flashed everything a couple times. I guess is have the right rom. i do worry cause i tried so many things. Thinking about sending in my phone to HTC today..
Click to expand...
Click to collapse
what exactly are you trying to flash, link please.
i tried so many things is don't know exaclty the links. I tried different custom recovery. CWM and TWRP. Since i don't have an OS any more i tried to install de M7xxx.zip
Is the error still unable to mount sdcard? If so, follow post # 3 in my Canadian stock link.. You may need to use a recovery closer to your HBOOT version.
lenneej said:
i tried so many things is don't know exaclty the links. I tried different custom recovery. CWM and TWRP. Since i don't have an OS any more i tried to install de M7xxx.zip
Click to expand...
Click to collapse
would you mind sharing what this "M7xxx.zip" is.
I am having the same issue
I am having the exact same issue as OP. I have HBOOT version 1.54 and TWRP 2.6.3.3., my bootloader is unlocked, and I am S-On. Every time i try to flash an image it gives me the unable to mount error. I am trying to use the Stock 4.4 GPE nandroid rom as suggested by @ipfreelytech. Any suggestions? Thanks
nkk71 said:
would you mind sharing what this "M7xxx.zip" is.
Click to expand...
Click to collapse
I think he was trying to flash a RUU.zip or an OTA.Zip through TWRP. which of coarse ain't gona work
---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------
Silverlateralus said:
I am having the exact same issue as OP. I have HBOOT version 1.54 and TWRP 2.6.3.3., my bootloader is unlocked, and I am S-On. Every time i try to flash an image it gives me the unable to mount error. I am trying to use the Stock 4.4 GPE nandroid rom as suggested by @ipfreelytech. Any suggestions? Thanks
Click to expand...
Click to collapse
it sounds like your also trying to flash a RUU through recovery
go back where you downloaded the file and read the instructions on how to install it
Silverlateralus said:
I am having the exact same issue as OP. I have HBOOT version 1.54 and TWRP 2.6.3.3., my bootloader is unlocked, and I am S-On. Every time i try to flash an image it gives me the unable to mount error. I am trying to use the Stock 4.4 GPE nandroid rom as suggested by @ipfreelytech. Any suggestions? Thanks
Click to expand...
Click to collapse
Does it work on any other TWRP version? Can your phone boot normally?
SaHiLzZ said:
Does it work on any other TWRP version? Can your phone boot normally?
Click to expand...
Click to collapse
I tried TWRP 2.6.3.0 with the same result. I dont know what you mean by "boot normally", but when I turn it on and don't force it to bootloader it just loads a dead android with a ! symbol.
Silverlateralus said:
I tried TWRP 2.6.3.0 with the same result. I dont know what you mean by "boot normally", but when I turn it on and don't force it to bootloader it just loads a dead android with a ! symbol.
Click to expand...
Click to collapse
From fastboot usb and a command prompt run fastboot getvar all
From here you can figure out what RUU you need to get your phone working again
Sent from my HTC One using Tapatalk
I also tried CM 10.2 with TWRP v2.6.3.0 and 2.6.3.3. These are the errors i keep getting no matter what i try:
wwwTAKETHISOUT.imgur.com/FAbiDqd
---------- Post added at 01:04 AM ---------- Previous post was at 12:56 AM ----------
clsA said:
From fastboot usb and a command prompt run fastboot getvar all
From here you can figure out what RUU you need to get your phone working again
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.07.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4286mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
This is the information I got. Not sure what to do with it though.
Silverlateralus said:
I also tried CM 10.2 with TWRP v2.6.3.0 and 2.6.3.3. These are the errors i keep getting no matter what i try:
(bootloader) version-bootloader: 1.54.0000 - your Hboot
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-main: 3.07.1700.1 - your firmware version
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001 - Google Play Edition CID
This is the information I got. Not sure what to do with it though.
Click to expand...
Click to collapse
Using the above info I see you have a google play phone or converted yours into one
To reset your phone your going to need s-off try here http://rumrunner.us/
what is the file your trying to flash in the photo (link to it please)
clsA said:
Using the above info I see you have a google play phone or converted yours into one
To reset your phone your going to need s-off try here
what is the file your trying to flash in the photo (link to it please)
Click to expand...
Click to collapse
I can't use rumrunner, because I don't have usb debugging enabled (which it says it requires).
The two roms i tried installing with TWRP are:
4.4 Nandroid - mega.co.nREMOVETHISz/#!TMlgWLDJ!ZfFlcx...4grwOLi-Ied3Tg
10.2 Cyanogen Mod - download.cyanogenmod.oREMOVETHISrg/get/jenkins/49872/cm-10.2.0-m7ul.zip
Hey there, I flashed a ROM and apparently it messed up my M7 Sprint I can't call or receive SMS, also I can't install apps even from OTG cable, I think this ROM is broken. Not sure if this is a hardware or software issue, I hope it's the latter. I can use the camera, WI-FI and play media files.
I have HBOOT 1.44 and my bootloader says TAMPERED and UNLOCKED.
How can I get back to stock from this stage? I'm super noob every bit of help will be appreciated
Dani84 said:
Hey there, I flashed a ROM and apparently it messed up my M7 Sprint I can't call or receive SMS, also I can't install apps even from OTG cable, I think this ROM is broken. Not sure if this is a hardware or software issue, I hope it's the latter. I can use the camera, WI-FI and play media files.
I have HBOOT 1.44 and my bootloader says TAMPERED and UNLOCKED.
How can I get back to stock from this stage? I'm super noob every bit of help will be appreciated
Click to expand...
Click to collapse
Ok so sounds like your having a rough time. I will try my best for you .
First of all some more information please. Boot you phone into the bootloader and connect fastbootusb. Then in your Fastboot command line type.
Code:
fastboot getvar all
And post the output here. Please edit out your serial no. And imei no.
what Rom did you flash and which recovery are you using? Did you clean flash i.e perform a full wipe before flashing, or Dirty flash i.e flash the Rom without wiping anything?
If the phones booting it can't of done anything to serious so let's hope this is an easy fix
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
uhm nothing, seems adb/fastboot is not working.
Im using Ubuntu 14.04... 64 bit.
p.s. in Windows 8.1 i connected it through this (Nocturnal ADB tool):
http://forum.xda-developers.com/showthread.php?t=2646453
I open the CMD and type adb devices and there it is HT35xxxxxxx. But when I type fastboot getvar all, it says waiting for device and is stuck there for 5+ minutes and nothing.
Dani84 said:
uhm nothing, seems adb/fastboot is not working.
Im using Ubuntu 14.04... 64 bit.
p.s. in Windows 8.1 i connected it through this (Nocturnal ADB tool):
http://forum.xda-developers.com/showthread.php?t=2646453
I open the CMD and type adb devices and there it is HT35xxxxxxx. But when I type fastboot getvar all, it says waiting for device and is stuck there for 5+ minutes and nothing.
Click to expand...
Click to collapse
Ah hA a Linux user nice to use Fastboot in linux all command must start sudo. So
sudo fastboot devices
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
Ah hA a Linux user nice to use Fastboot in linux all command must start sudo. So
sudo fastboot devices
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
Oh true!!! :victory:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3xxxxxx
(bootloader) imei: 35xxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP304
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Value too large for defined data type))
finished. total time: 5.042s
Dani84 said:
Oh true!!! :victory:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3xxxxxx
(bootloader) imei: 35xxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP304
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Value too large for defined data type))
finished. total time: 5.042s
Click to expand...
Click to collapse
Your phone does not appear to be a Sprint m7. As they have product I'd m7wls
Yours has m7_ul so it is international version. If you flashed a Sprint Rom that would certainly explain your problem. Luckily your s-on so shouldn't have done to much damage.
What Rom did you flash and which recovery are you using?
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
my recovery is TWRP 2.7.1.1
and the ROM is LiquidSmooth but it is horrible LOL and I can't flash new ROMs apparently.
how do I know if my ONE is sprint or at&t? I always assumed it was sprint as Im from Spain.
Dani84 said:
my recovery is TWRP 2.7.1.1
and the ROM is LiquidSmooth but it is horrible LOL and I can't flash new ROMs apparently.
how do I know if my ONE is sprint or at&t? I always assumed it was sprint as Im from Spain.
Click to expand...
Click to collapse
your phone is not Sprint or AT&T
you have
product: m7_ul <- this is a GSM with LTE
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP304 <- this says it's from Vodafone
So your looking for a RUU with VODAP in the CID ... all I see are some OTA files seems theirs no RUU
Dani84 said:
my recovery is TWRP 2.7.1.1
and the ROM is LiquidSmooth but it is horrible LOL and I can't flash new ROMs apparently.
how do I know if my ONE is sprint or at&t? I always assumed it was sprint as Im from Spain.
Click to expand...
Click to collapse
Your firmware also appears to be very old there is a reset zip i think will do the trick.
http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/
This reset zip should return you to stock so you take ota updates, then you can update to official kitkat Rom and firmware.
Reroot the phone and install a international based Rom. Stay away from TWRP 2.7.1.1 though you'll notice in your getvar version main is blank. That's caused by TWRP 2.7.1.1. Stick with TWRP 2.6.3.3 to avoid this happening again.
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
Your firmware also appears to be very old there is a reset zip i think will do the trick.
Link to follow
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
k thanks so what to do? what link?
Dani84 said:
k thanks so what to do? what link?
Click to expand...
Click to collapse
See my edited post above
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
See my edited post above
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
downloading time = 2hours LOL, no problem I have time.
so I can flash that even when bootloader says TAMPERED and UNLOCKED? i want to be sure im not bricking my phone haha.
Dani84 said:
downloading time = 2hours LOL, no problem I have time.
so I can flash that even when bootloader says TAMPERED and UNLOCKED? i want to be sure im not bricking my phone haha.
Click to expand...
Click to collapse
Yes just flashes like a normal Rom from TWRP recovery, it will replace your custom recovery with stock and your Rom.
I think your firmware is probably still older than this reset.zip though. I'm not sure if that will cause a problem.
So you could also download this OTA extract the firmware from it and flash it manually to bring your firmware in line with the reset.zip
http://www.htc1guru.com/dld/ota_m7_..._p_release_325133_signedlqk8p6c09r7kmir2-zip/
That will require relocking the bootloader though but you can always unlock again after.
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Dani84 said:
downloading time = 2hours LOL, no problem I have time.
so I can flash that even when bootloader says TAMPERED and UNLOCKED? i want to be sure im not bricking my phone haha.
Click to expand...
Click to collapse
yeah the Guru_Reset requires unlocked bootloader and TWRP 2.6.3.3 custom recovery.
To take the over the air updates it's Important that you choose to install
stock recovery and say no to root in the guru reset Aroma installer.
Good luck !!
Thanks guys, both of you have been very kind and helpful I will try this and tell you tomorrow (its night in Spain).
@clsA do you know about the firmware will he need to update it to match the reset or will it still update ok as is ?
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
@clsA do you know about the firmware will he need to update it to match the reset or will it still update ok as is ?
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
The firmware may indeed need updated but I'm not positive
Dani84 said:
Thanks guys, both of you have been very kind and helpful I will try this and tell you tomorrow (its night in Spain).
Click to expand...
Click to collapse
clsA said:
The firmware may indeed need updated but I'm not positive
Click to expand...
Click to collapse
Probably best to do it then in that case, better safe than sorry thanks.
Ok so hopefully this will tell you everything you need.
Download the ota file as well. Then open it on your pc and extract the firmware.zip from it and place it in your Fastboot folder. Then follow this small guide I put together.
Ok so the plan is to upgrade your software to complete Stock 2.24.161.1, Rom, recovery and firmware will all be on the same os version and unmolested stock condition. After which you will be able to update you phone with official ota updates.
Prepare the files, your pc and phone for the procedure. Rename the 2.24.161.1.zip to firmware.zip and place it in your Fastboot folder on your pc. Connect your phone to mass storage with usb and copy the reset.zip to your internal storage/sdcard.
Ok let's get started. Reboot your phone into recovery. And flash the reset.zip just like installing a custom Rom. Select install and choose the reset.zip. Once it's done your Rom, recovery and radio will be back to stock. (if you choose to install the radio, it's optional at this stage as it will be done with the firmware anyway.
Now we need to upgrade the firmware since the OTA update will expect to find version 2.24.161.1 but your firmware is older than that so the OTA may fail to install.
Reboot the phone to the bootloader and Connect fastbootusb. Now open your Fastboot command line and type
Code:
fastboot erase cache
Code:
fastboot oem lock
Code:
fastboot reboot-bootloader
Code:
fastboot oem rebootRUU
<--- case sensitive.
The phone will reboot to a black screen with a Silver HTC LOGO. This is RUU mode. Now we're going to flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash will be short. It's just a preupdate preparing the hboot for the new firmware. So we need to do the same command again.
Code:
fastboot flash zip firmware.zip
The second flash will take a little longer and this time it will flash the full firmware. The progress bar on the phone screen will not reach 100% this is normal as long as the command window has completed its output the flash is done.
Code:
fastboot reboot-bootloader
You should now see your new firmware version 2.24.161.1 in the bootloader. And that's it
Reboot the phone and complete the Rom setup. You should start getting notifications for OTA updates almost immediately. If not just go to settings>about and check for updates to force it. Take all the OTA's up to the latest and you're done
Completely stock software. If you decide to reroot make a nandroid of the Stock Rom before you root it. And copy it to your pc. This way you can return to stock easily for future OTA updates
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
It worked!!!!!!
Now im running my stock HTC One again. Such a lame Vodafone ROM with tons of bloatware but at least the phone is alive and Im happy with that.
tbh Im now scared of flashing a new ROM, i would like the android revolution or one of those flashy roms but I think im gonna wait some days before making a decission lol. Thanks everyone
Dani84 said:
It worked!!!!!!
Now im running my stock HTC One again. Such a lame Vodafone ROM with tons of bloatware but at least the phone is alive and Im happy with that.
tbh Im now scared of flashing a new ROM, i would like the android revolution or one of those flashy roms but I think im gonna wait some days before making a decission lol. Thanks everyone
Click to expand...
Click to collapse
Well done m8, glad you got it sorted. You shouldn't be scared of flashing a new Rom though. The only thing that went wrong last time was you flashed a Rom for a different version of the M7.
As long as you stick with m7_ul roms you'll be fine but it's understandable you would want to take some time to process what happened. It's never fun thinking you bricked an expensive device such as the HTC one.
If you ever decide you want to try a Rom feel free to pm me for some guidance. For now relax and enjoy your working phone :highfive:
---------- Post added at 05:22 PM ---------- Previous post was at 05:01 PM ----------
@Dani84 Hi m8 just seen your PM. Yeah ARHD is a good place to start, it's quite close to stock but with xposed support and sense 6 toolbox.
Very smooth reliable Rom with no major bugs that I know of. I've been using ARHD since version 43 and I just love it. Version 80.0 is on the Horizon (Android 4.4.3).
I think I warned you already about twrp but just incase make sure to flash twrp 2.6.3.3 to preserve your os information.
Download the Rom and drop it on your sd card. Reboot to recovery and flash the Rom from the install menu in twrp. Make sure to do a full data wipe in the aroma installer as your changing from stock to custom Rom.
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
[Q&A] [ROM] Android Revolution HD 81.0 • High Quality & Performance • Sense 6 Toolbox
Q&A for [ROM] Android Revolution HD 81.0 • High Quality & Performance • Sense 6 Toolbox
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey guys, is it possible to install Android Revolution HD without HTC Sense?
Lost Everything HTC One (M/)
Hello,
I tried to upgrade my previous CFW 4.2 Revolution HD to the latest one. I did the followed:
- Copied Android Revolution HD 81.0 zip file to the phone
- did a backup first
- run the image with TWRP 2.5.0.0
- always received de msn of sucess at the end but the phone didn´t start
- restored the backup and tried several times to install de CFW
- first problem: the backup image that i made was no long avaiable, only the fiirst one that i did when i bought the fone, after restoring with that image when i connect the phone to my pc and copy to it others CFW i manage to move it to the sdcard folder but no longer i can acess to it throw the TWRP, than i made an upgrade of the TWRP no 2.8.0.2 but the problem remains the same, so i thoght that it would be a conflit, i tried to clean everything on the phone, and i didn´t see that i pick the internal storage option, rusult, i lost everything.
So right now i have no OS on my HTC One, and i can´t acess the internal storage throw pc tho save a clean image.
Please what can i do? whit a OTG cable i can save and install a clean image on the phone? what did i wrong at the first place?
Thanks in advance for your help. (sorry for my english)
o santo said:
Hello,
I tried to upgrade my previous CFW 4.2 Revolution HD to the latest one. I did the followed:
- Copied Android Revolution HD 81.0 zip file to the phone
- did a backup first
- run the image with TWRP 2.5.0.0
- always received de msn of sucess at the end but the phone didn´t start
- restored the backup and tried several times to install de CFW
- first problem: the backup image that i made was no long avaiable, only the fiirst one that i did when i bought the fone, after restoring with that image when i connect the phone to my pc and copy to it others CFW i manage to move it to the sdcard folder but no longer i can acess to it throw the TWRP, than i made an upgrade of the TWRP no 2.8.0.2 but the problem remains the same, so i thoght that it would be a conflit, i tried to clean everything on the phone, and i didn´t see that i pick the internal storage option, rusult, i lost everything.
So right now i have no OS on my HTC One, and i can´t acess the internal storage throw pc tho save a clean image.
Please what can i do? whit a OTG cable i can save and install a clean image on the phone? what did i wrong at the first place?
Thanks in advance for your help. (sorry for my english)
Click to expand...
Click to collapse
You need a newer version of TWRP
flash 2.6.3.3 from here > http://techerrata.com/browse/twrp2/m7
ARHD will work fine with that
clsA said:
You need a newer version of TWRP
flash 2.6.3.3 from here
ARHD will work fine with that
Click to expand...
Click to collapse
But i´m using 2.8.0.2 it´s not newr?
But even if i can replace with 2.6.3.3 the problem is that i don´t have any longer the image of ARHD inside my phone, i´ve erased everything and i have no way of copying it again to my phone, because i don t have any OS the pc doesn´t recongize the phone.... i don´t know what to do.
is it possible to use usb otg cable with a pen to copy it?
Or using the same way to flash the twrp, can i transfer the ARHD image to the internal storage of the phone?
o santo said:
But i´m using 2.8.0.2 it´s not newr?
But even if i can replace with 2.6.3.3 the problem is that i don´t have any longer the image of ARHD inside my phone, i´ve erased everything and i have no way of copying it again to my phone, because i don t have any OS the pc doesn´t recongize the phone.... i don´t know what to do.
is it possible to use usb otg cable with a pen to copy it?
Or using the same way to flash the twrp, can i transfer the ARHD image to the internal storage of the phone?
Click to expand...
Click to collapse
you can use usb otg, adb push or adb sideload to copy the rom to your phone. All 3 solutions can be done from recovery. Use twrp 2.6.3.3
alray said:
you can use usb otg, adb push or adb sideload to copy the rom to your phone. All 3 solutions can be done from recovery. Use twrp 2.6.3.3
Click to expand...
Click to collapse
Used the abd push & version 2.6.3.3 and it worked. Saved my life.
Thanks
knacht said:
Hey guys, is it possible to install Android Revolution HD without HTC Sense?
Click to expand...
Click to collapse
There's a asop version in the development thread. Though it's not the latest version last I saw.
@clsA: i have tried to flash 2.7.0.0. but after that recovery crashed. i can not enter it.
@bouncing object: i have did that but after flashing of revolution hd, system crashed.
any ideas why?
mara_hr said:
@clsA: i have tried to flash 2.7.0.0. but after that recovery crashed. i can not enter it.
@bouncing object: i have did that but after flashing of revolution hd, system crashed.
any ideas why?
Click to expand...
Click to collapse
Do you have a sprint or Verizon phone ?
why are you using TWRP 2.7.0.0 ? when everyone tells you use 2.6.3.3
clsA said:
Do you have a sprint or Verizon phone ?
why are you using TWRP 2.7.0.0 ? when everyone tells you use 2.6.3.3
Click to expand...
Click to collapse
because even with 2.6.3.3 i couldnt instal any rom.
sprint phone
mara_hr said:
sprint phone
Click to expand...
Click to collapse
from ARHD thread under "about rom:"
System details:
Android 4.4.2 (KitKat) - latest official HTC One 6.09.401.5 (WWE) firmware (71.x series) [No Sprint Support]
Android 4.4.2 (KitKat) - latest official HTC One 3.62.1700.1 (Google Edition) firmware ---> click here
Android 4.4.2 (KitKat) - latest *STOCK* ROMs without modifications ---> click here
This is improved version of stock ROM - no visual changes!
Very fast, clean & stable!
Full HTC Sense 6.0 Interface
Multi-language (WWE)
For HTC One International GSM/LTE (UL), International GSM (U), all U.S. carriers (apart from Sprint) (click here for more details)
Thanks to HTC for the base firmware
Video Review by owenbeals
Video Review by krazygreen
Video Review by udimars30
Click to expand...
Click to collapse
So now you probably have screwed your partitions flashing an incompatible rom and recovery to your phone. Flash a twrp version for Sprint variant and then format data and flash a Custom rom compatible with Sprint phones (M7WLS)
Sprint TWRP here: http://techerrata.com/browse/twrp2/m7wls
Sprint roms here: http://forum.xda-developers.com/sprint-htc-one/development
I'm always stuck at "Formatting partitions". I've restarted the install maybe 5-6 times...
joallard said:
I'm always stuck at "Formatting partitions". I've restarted the install maybe 5-6 times...
Click to expand...
Click to collapse
We need more information that what you provided.
What custom recovery type and version are you using?
What are you trying to install? Where did you get the file? Did you check MD5?
Post a fastboot getvar all except for imei and serialno.
Aroma installer stock at 10% system unmounted already
HI,
I had ARHD 71.1 with 5.11.1540.10 fw and elementalx 14 all worked fine,
i decided to upgrade to ARHD 81.1 so:
1.-First updated fw to 6.09.401.5 with a custom to remove the red text form this post :http://forum.xda-developers.com/showthread.php?t=2365506,
all was good,
2.-Then i updated to TWRP to 2.8.0.2-m7 from 2.7.1.1-m7, everything keep working
3.-Finally when a ran the twrp to install ARHD 81.1 i got stock on 10% and the message its "system unmounted already".
I repeated the process (#3) at least 8 times and it was the same issue, even tried to install 71.1 and the error was the same...
I did check the MD5 sum, it was correct .
As the process mess up my SO, i had to use a backup from my stock SO 4.4.2 that fortunately works well so what should i try ?
My stock version prompt's me to update to stock 4.4.3 do i try it first ?
Do i use TWRP 2.6.3.3 ?
Vars:
D:\nocturnal_adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: S***********8
(bootloader) imei: 3*************2
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3735mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Thanks in advance !
Cheers
sinuhedl said:
HI,
I had ARHD 71.1 with 5.11.1540.10 fw and elementalx 14 all worked fine,
i decided to upgrade to ARHD 81.1 so:
1.-First updated fw to 6.09.401.5 with a custom to remove the red text form this post :http://forum.xda-developers.com/showthread.php?t=2365506,
all was good,
2.-Then i updated to TWRP to 2.8.0.2-m7 from 2.7.1.1-m7, everything keep working
3.-Finally when a ran the twrp to install ARHD 81.1 i got stock on 10% and the message its "system unmounted already".
I repeated the process (#3) at least 8 times and it was the same issue, even tried to install 71.1 and the error was the same...
I did check the MD5 sum, it was correct .
As the process mess up my SO, i had to use a backup from my stock SO 4.4.2 that fortunately works well so what should i try ?
My stock version prompt's me to update to stock 4.4.3 do i try it first ?
Do i use TWRP 2.6.3.3 ?
Vars:
D:\nocturnal_adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: S***********8
(bootloader) imei: 3*************2
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3735mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Thanks in advance !
Cheers
Click to expand...
Click to collapse
Flash your stock firmware 6.09.401.5 first, then flash TWRP 2.6.3.3. Once that is finished, try AHRD 81.
my HTC one M7 t-mobile
Hboot 1.54
Recovery 2.8.02 late
i Flash this rom -> stuck HTC logo ( i Wipe data + cache + davik )
i Can flash this rom on my phone ?
Sr i can speak litter English....
Old version download link
Where can i get the old version of ARHD? Thanks!
Phone stuck on HTC Powered by ANDROID Logo Screen
I performed all the steps as mentioned above to install ARHD on my HTC One M7, it seems to be stuck on the HTC logo. What do i do!
S-ON HBOOT 1.57
TWRP is giving me the 'No OS Installed' error
Thanks !
majmoz said:
Flash your stock firmware 6.09.401.5 first, then flash TWRP 2.6.3.3. Once that is finished, try AHRD 81.
Click to expand...
Click to collapse
Thaks for the help
I did this:
1.- Flash stock recovery for 6.09.401.5
2.-Update via OTA to 4.4.3
3.-Flash TWRP openrecovery-twrp-2.7.1.1-m7 which worked for ARHD 71 and for 81
4.-Flash ARHD81
5.-Flash fw 6.09.401.5 custom without red texts
6.-Flash ElementalX-m7-18.0-Sense
Now the system works well as expected but, the wake gestures that must be enable with Sense 6 Toolbox plus ElementalX are not working, i already update Sense 6 Toolbox and Xposed to last versions but it didn't work.
I updated the HTC Lockscreen app to see if it helps.
Thaks & Cheers
Hey XDA.
I have an HTC M7 currently with ARHD.
How I did it since now, was to unlock bootloader, get a custom recovery and then flash the custom ROM zip.
Now I found out that I should flash base(?) firmware zips and then then Custom ROMs and Radio and stuff like that.
After reading all that I got a little confused.
Can somebody explain me what I should do?
Le_Vizz said:
Hey XDA.
I have an HTC M7 currently with ARHD.
How I did it since now, was to unlock bootloader, get a custom recovery and then flash the custom ROM zip.
Now I found out that I should flash base(?) firmware zips and then then Custom ROMs and Radio and stuff like that.
After reading all that I got a little confused.
Can somebody explain me what I should do?
Click to expand...
Click to collapse
Weather you need to update firmware or not depends on your current firmware. And version of the ROM, I assume your running the latest 92 lollipop Rom.
Can you please post the output of
Code:
fastboot getvar all
please remove your IMEI and Serial number before posting. :good:
Then we can see if you need to update your firmware. And which firmware you need.
Sent from my M7 Running ARHD 92.x
Danny201281 said:
Weather you need to update firmware or not depends on your current firmware. And version of the ROM, I assume your running the latest 92 lollipop Rom.
Can you please post the output of
Code:
fastboot getvar all
please remove your IMEI and Serial number before posting. :good:
Then we can see if you need to update your firmware. And which firmware you need.
Sent from my M7 Running ARHD 92.x
Click to expand...
Click to collapse
C:\ADB>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3976mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
Thank you for your support
Le_Vizz said:
C:\ADB>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3976mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
Thank you for your support
Click to expand...
Click to collapse
Your firmware is very old. But maybe not such a bad thing at the moment. Have you ever considered going s-off. If you have it would be better to do it now before updating your firmware.
Your currently on hboot 1.55 which you can s-off for free using rumrunner. Once you update past 1.55 your only option for s-off will be Sunshine which costs $25 to use. Also updating firmware while s-off is much easier since you won't need to relock your bootloader.
Your current firmware base is for jellybean. So you will probably have some problems with the latest lollipop roms. You should update to get the most out of your device and the latest roms. But I do recommend going s-off first. :good:
Sent from my SM-T230 using Tapatalk
Danny201281 said:
Your firmware is very old. But maybe not such a bad thing at the moment. Have you ever considered going s-off. If you have it would be better to do it now before updating your firmware.
Your currently on hboot 1.55 which you can s-off for free using rumrunner. Once you update past 1.55 your only option for s-off will be Sunshine which costs $25 to use. Also updating firmware while s-off is much easier since you won't need to relock your bootloader.
Your current firmware base is for jellybean. So you will probably have some problems with the latest lollipop roms. You should update to get the most out of your device and the latest roms. But I do recommend going s-off first. :good:
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
So I should S-OFF, then Update my firmware and then install Custom ROM/Kernel?
Le_Vizz said:
So I should S-OFF, then Update my firmware and then install Custom ROM/Kernel?
Click to expand...
Click to collapse
Yeah that's what I would recommend. S-off first
Then you can find all firmware zips for your device here https://www.androidfilehost.com/?w=files&flid=32777
You will need to flash
4.19.401.11.zip
5.11.401.10.zip
6.09.401.12.zip
7.19.401.22.zip
If you flash them with s-off they will not wipe anything from your device. Once you have the latest firmware you can use any lollipop Rom you choose :good:
Sent from my M7 Running ARHD 92.x
Danny201281 said:
Yeah that's what I would recommend. S-off first
Then you can find all firmware zips for your device here https://www.androidfilehost.com/?w=files&flid=32777
You will need to flash
4.19.401.11.zip
5.11.401.10.zip
6.09.401.12.zip
7.19.401.22.zip
If you flash them with s-off they will not wipe anything from your device. Once you have the latest firmware you can use any lollipop Rom you choose :good:
Sent from my M7 Running ARHD 92.x
Click to expand...
Click to collapse
Do I flash the firmwares through recovery or through fastboot?
And do I flash them after another or do I have to flash one and start the phone and then flash the next one?
Le_Vizz said:
Do I flash the firmwares through recovery or through fastboot?
And do I flash them after another or do I have to flash one and start the phone and then flash the next one?
Click to expand...
Click to collapse
Flash them with fastboot. Put the firmware files in your fastboot folder. And connect fastboot usb in the bootloader.
With s-off flash with these commands.
Code:
fastboot erase cache
fastboot oem rebootRUU
The device will boot to a black screen with silver HTC logo. This is ruu mode.
Code:
fastboot flash zip name_of_firmware.zip
The first flash is just a pre update. Repeat the same command.
Code:
fastboot flash zip name_of_firmware.zip
The second flash will flash the firmware. The progress bar on the screen will not reach 100% that's normal. When the flash is complete
Code:
fastboot reboot-bootloader
Done.
You don't need to reboot to Android just repeat the procedure again for the next zip strait from the bootloader.
The firmware updates will include the stock recovery. So you will need to flash TWRP or CWM when your done.
If you decide to update wile s-on the procedure is the same. But you will need to 're-lock your bootloader before you start.
Code:
fastboot oem lock
fastboot reboot-bootloader
Be aware though when you unlock the bootloader it will wipe your devices internal storage.
Sent from my M7 Running ARHD 92.x
When I flash/update the Firmware, does it change my current ROM in a way, that I need to reflash it?
Le_Vizz said:
When I flash/update the Firmware, does it change my current ROM in a way, that I need to reflash it?
Click to expand...
Click to collapse
Very good question I'm glad you asked. I missed this in my last post. The firmware will also replace the stock boot.img. only a problem if your running a custom Rom. In which case you don't need to reflash the entire Rom. You can extract the boot.img from the rom zip and flash it with fastboot.
Code:
fastboot flash boot boot.img
Did you manage to s-off? With s-off you can also flash custom firmware. So you could just delete the boot.img and recovery.img from each of the firmware.zips then you can just flash the firmware without complications. :good:
Sent from my M7 Running ARHD 92.x
Danny201281 said:
Did you manage to s-off? With s-off you can also flash custom firmware. So you could just delete the boot.img and recovery.img from each of the firmware.zips then you can just flash the firmware without complications. :good:
Sent from my M7 Running ARHD 92.x
Click to expand...
Click to collapse
Unfortunately, I'm stuck and I get the error "WTF: What are you doing"
Tried to re-install drivers, changed USB ports but nothing worked
Le_Vizz said:
Unfortunately, I'm stuck and I get the error "WTF: What are you doing"
Tried to re-install drivers, changed USB ports but nothing worked
Click to expand...
Click to collapse
This error was from rumrunner? What Rom is currently installed?
Sent from my M7 Running ARHD 92.x
Danny201281 said:
This error was from rumrunner? What Rom is currently installed?
Sent from my M7 Running ARHD 92.x
Click to expand...
Click to collapse
Currently on ARHD 92
Le_Vizz said:
Currently on ARHD 92
Click to expand...
Click to collapse
You may need to flash a jellybean Rom for rumrunner to work. I'm looking for a link for you :good:
Sent from my M7 Running ARHD 92.x
@alray @clsA @majmoz hey guys any idea where to find a 3.62.401.1 stock rom to use with rumrunner. The one on htc1 guru has a dead link. Can't find anything else. Or ARHD 31?
Sent from my SM-T230 using Tapatalk
Danny201281 said:
@alray @clsA @majmoz hey guys any idea where to find a 3.62.401.1 stock rom to use with rumrunner. The one on htc1 guru has a dead link. Can't find anything else. Or ARHD 31?
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
@alray @clsA
Here you might find ARHD 31. Hope it helps.
majmoz said:
@alray @clsA
Here you might find ARHD 31. Hope it helps.
Click to expand...
Click to collapse
Yes thanks @majmoz helps a lot. Couldn't find anything. Even a direct search at AFH turn up nothing
Le_Vizz said:
Currently on ARHD 92
Click to expand...
Click to collapse
Rumrunner should work with this rom :good:
https://www.androidfilehost.com/?fid=23269279319197489
Sent from my SM-T230 using Tapatalk
Danny201281 said:
Yes thanks @majmoz helps a lot. Couldn't find anything. Even a direct search at AFH turn up nothing
Rumrunner should work with this rom :good:
https://www.androidfilehost.com/?fid=23269279319197489
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
Will this work with Hboot 1.57, I tried with insertcoin 5.0.2 and ARHD 4.4.2? Can I downgrade Hboot with S-ON by flashing older RUU signed by HTC or 3rd pary authority?
nebitan said:
Will this work with Hboot 1.57, I tried with insertcoin 5.0.2 and ARHD 4.4.2? Can I downgrade Hboot with S-ON by flashing older RUU signed by HTC or 3rd pary authority?
Click to expand...
Click to collapse
Sorry confused you with a different user. Previous reply deleted.
No rumrunner will not work on hboot 1.57. Only sunshine app works to s-off hboot 1.57. If you mean will the rom work then yes it should but it's based on a much older firmware. Downgrading firmware is not possible with s-on. So you can either upgrade your firmware and use ARHD 92 which is a lollipop rom. Or keep your existing firmware and flash ARHD 84 which is a kitkat rom
Because your s-on upgrading firmware will require you to lock the bootloader. Be advised that unlocking again will wipe your devices internal memory. So backup everything you want to keep to your pc before you start. If you want to upgrade to lollipop there are plenty of RUUs for lollipop there should be one you can use depending on your current OS version. Upgrading via ruu will also require you to relock the bootloader.
Sent from my SM-T230 using Tapatalk
Hello, guys. How you doing?
UPDATE: it's solved, i got back to stock rom after flashing this: https :// fl1.androidfilehost.com/dl/2k6GKx4IJOgIhD09zRzbzw/1441027324/95897840722641610/Reset_rom_6.07.1540.2.zip?
Now I'm going to do a BACKUP haha
I am with a HTC ONE M7 Internation/Unlocked Soft-Bricked, with no OS... Here are some information:
- Using TWRP 2.8.7.0 custom recovery for M7 (latest version)
- Unlocked bootloader
- Rooted (at least I did it before wipping my OS)
- S-ON!
- HBOOT v.1.57
- Already have ADB/Fastboot on my PC
- Modelid: PN0711000
- Cidnum: HTC__332
Here's my tale:
I tried to install RUU M7 Lollipop ROM, from HTC's website. But, at the very beggining of the instalation (4%), the RUU software said it lost my device. I did it while in fastboot mode, because it was the only way RUU recognized my phone. Then I could not install Lollipop ROM by RUU method, so I decided to flash a Lollipop ROM Unlocked Version for One M7.
I knew that for doing it I would need to install some custom recovery on my phone, unlock its bootloader mode and install on my PC ADB and Fastboot. I did all of this; the bootloader unlocked I did from HTC's website guide. So, I put on my phone a ROM in zip extension, boot it on recovery mode. I read that I should wipe data, cache, calvik cache and, maybe, system. And I did it... with NO BACKUP of original ROM --' I know I was stupid...
So I wipe this partitions, entered Install menu and tried to run instalation of the ROM zip file. It didn't work!!! Some error: "E: error executing updater binary in zip..." And I tried to flash different ROMs, all of them showed this error...
Then now I am with a Soft-Bricked HTC ONE M7 which has no OS. Some pics of my status: https: // w w w .dropbox.com/s/ruyen2ikn0u5i0u/Soft-Bricked%20M7.rar?dl=0
I hope you can help me
Please, help me :crying:
Atadie said:
Hello, guys. How you doing?
I am with a HTC ONE M7 Internation/Unlocked Soft-Bricked, with no OS... Here are some information:
- Using TWRP 2.8.7.0 custom recovery for M7 (latest version)
- Unlocked bootloader
- Rooted (at least I did it before wipping my OS)
- S-ON!
- HBOOT v.1.57
- Already have ADB/Fastboot on my PC
- Modelid: PN0711000
- Cidnum: HTC__332
There's my tale:
I tried to install RUU M7 Lollipop ROM, from HTC's website. But, at the very beggining of the instalation (4%), the RUU software said it lost my device. I did it while in fastboot mode, because it was the only way RUU recognized my phone. Then I could not install Lollipop ROM by RUU method, so I decided to flash a Lollipop ROM Unlocked Version for One M7.
I knew that for doing it I would need to install some custom recovery on my phone, unlock its bootloader mode and install on my PC ADB and Fastboot. I did all of this; the bootloader unlocked I did from HTC's website guide. So, I put on my phone a ROM in zip extension, boot it on recovery mode. I read that I should wipe data, cache, calvik cache and, maybe, system. And I did it... with NO BACKUP of original ROM --' I know I was stupid...
So I wipe this partitions, entered Install menu and tried to run instalation of the ROM zip file. It didn't work!!! Some error: "E: error executing updater binary in zip..." And I tried to flash different ROMs, all of them showed this error...
Then now I am with a Soft-Bricked HTC ONE M7 which has no OS. Some pics of my status: https: // w w w .dropbox.com/s/ruyen2ikn0u5i0u/Soft-Bricked%20M7.rar?dl=0
I hope you can help me
Click to expand...
Click to collapse
post the output of "fastboot getvar all" (remove your imei and serialno)
alray said:
post the output of "fastboot getvar all" (remove your imei and serialno)
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.15.599.101
version-misc: PVT SHIP S-ON
serialno: ************
imei: ***************
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__332
battery-status: good
battery-voltage: 4322mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Could not get S-OFF
I tried getting S-OFF by Rumrunner method and didn't work :/
Hep me, guys! I really need my One back to life!!! I'm in pain :crying:
Atadie said:
I tried getting S-OFF by Rumrunner method and didn't work :/
Click to expand...
Click to collapse
You can't use rumrunner to achieve s-off on hboot 1.57, only method is Sunshine
Atadie said:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.15.599.101
version-misc: PVT SHIP S-ON
serialno: ************
imei: ***************
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__332
battery-status: good
battery-voltage: 4322mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
There is not much available for 6.15.599.101 version, you'll probably need to use custom roms or convert to another version. There is a 6.15.599.101 ruu available at irfile.com but you will need an acount to download it (paid account) http://www.ir-file.com/portal/index.php?dir=Firmware/HTC/HTC_Android/M7_U/
Atadie said:
UPDATE: it's solved, i got back to stock rom after flashing this: https :// fl1.androidfilehost.com/dl/2k6GKx4IJOgIhD09zRzbzw/1441027324/95897840722641610/Reset_rom_6.07.1540.2.zip?
Now I'm going to do a BACKUP haha
Click to expand...
Click to collapse
This rom is for the Developer edition version CID BS_US001 and MID PN0712000, By flashing this on your phone, you're far from being stock, you will not get any ota updates and be stuck on this version.
alray said:
You can't use rumrunner to achieve s-off on hboot 1.57, only method is Sunshine
There is not much available for 6.15.599.101 version, you'll probably need to use custom roms or convert to another version. There is a 6.15.599.101 ruu available at irfile.com but you will need an acount to download it (paid account) http://www.ir-file.com/portal/index.php?dir=Firmware/HTC/HTC_Android/M7_U/
This rom is for the Developer edition version CID BS_US001 and MID PN0712000, By flashing this on your phone, you're far from being stock, you will not get any ota updates and be stuck on this version.
Click to expand...
Click to collapse
Oh, thanks :/
So, what is the best path to follow to get Lollipop? Should I pay 25 bucks for Sunshine, change my CID and try to flash correct Lollipop rom? Is there another way to get Lollipop rather that one?
Are there so many new and interesting features on Lollipop or should I stay on KitKat 4.4.3? I don't know so many custom good roms; can you recommend me some?
Sorry for asking so much questions. I know, probably I'm bothering you '-'
PS: Now my system asks for an OTA update to Lollipop, but it's not possible... Probably due to what you said about my flashed rom being Developer edition's one.
Atadie said:
Oh, thanks :/
So, what is the best path to follow to get Lollipop? Should I pay 25 bucks for Sunshine, change my CID and try to flash correct Lollipop rom? Is there another way to get Lollipop rather that one?
Click to expand...
Click to collapse
Either pay for sunshine so you can change your CID / MID to convert your phone to another version using a lollipop RUU or pay for an account at ir-file.com so you can download the .599 ruu and then take all ota updates.
Are there so many new and interesting features on Lollipop or should I stay on KitKat 4.4.3?
Click to expand...
Click to collapse
Many ppl likes lollipop and probably as many ppl doesn't like it. I think its better to try it yourself and see what you prefer. Some ppl likes the new features and other ones are complaining about battery drain and lags.
I don't know so many custom good roms; can you recommend me some?
Click to expand...
Click to collapse
All custom roms are good, it all depends what features you need. The best you can do is to read some rom threads and choose one that fit what you need, try it a few days and if not liking it, flash another one. If you want good battery life and no lag, I would recommend GPE roms, if you need what HTC Sense have to offer, then choose a Sense based rom like ARHD, Maximus, InsertCoin, NuSense ....
PS: Now my system asks for an OTA update to Lollipop, but it's not possible... Probably due to what you said about my flashed rom being Developer edition's one.
Click to expand...
Click to collapse
Because your CID and MID doesn't match the rom version you have flashed. Developer edition is for CID BS_US001 and MID PN0712000, yours is HTC__332 and PN0711000, In order to receive ota updates, you must be 100% stock either be flashing the .599 ruu for HTC__332 / PN0711000 or by achieving s-off, changing your CID / MID and flashing another version ruu e.g: changing your cid to BS_US001, your MID to PN0712000 and flashing a dev edition (.1540) RUU.
alray said:
All custom roms are good, it all depends what features you need. The best you can do is to read some rom threads and choose one that fit what you need, try it a few days and if not liking it, flash another one. If you want good battery life and no lag, I would recommend GPE roms, if you need what HTC Sense have to offer, then choose a Sense based rom like ARHD, Maximus, InsertCoin, NuSense ....
Click to expand...
Click to collapse
I was reading about Android Revolution HD, it seems good. I really like Blinkfeed (Highlights) so I guess I wouldn't flash a ROM which doesn't have it. I think ARHD got Blinkfeed, right?
Can I flash this ROM on my phone? As far as you know about my specs.