Hi guyes, I really messed up tired to install a rom on my S3 Mini (CM 11.0 KitKat) came up with status 7 installation aborted
, backed out rebooted the phone goes straight into CWM wiped the davlik cache and cache, rebooted the phone same boot again straight into CWM, took out battery gave it 2 minutes no help. Really need some help Please:crying:
Jhamat123 said:
Hi guyes, I really messed up tired to install a rom on my S3 Mini (CM 11.0 KitKat) came up with status 7 installation aborted
, backed out rebooted the phone goes straight into CWM wiped the davlik cache and cache, rebooted the phone same boot again straight into CWM, took out battery gave it 2 minutes no help. Really need some help Please:crying:
Click to expand...
Click to collapse
Mhhm,
Did you install using Odin or via CWM?
Try installing another ROM with CWM.
If that doesn't work, try to install Stock ROM back.
danielsinnema said:
Mhhm,
Did you install using Odin or via CWM?
Try installing another ROM with CWM.
If that doesn't work, try to install Stock ROM back.
Click to expand...
Click to collapse
Hi there I installed using cwm, I have been looking for the stock rom, but havent been able to find it, Thanks in advance
Jhamat123 said:
Hi there I installed using cwm, I have been looking for the stock rom, but havent been able to find it, Thanks in advance
Click to expand...
Click to collapse
Stock ROMs from Samsung can be found here: http://www.sammobile.com/firmwares/
Search for your device in the search bar.
Type: ''GT-I8190N''.
Download the right ROM. (Your country and eventually your provider).
Download and install Odin 3.07 (if you hadn't already).
Download and install Samsung Drivers for mobile phone. (If you hadn't already).
How to flash:
1) Go into recovery mode and perform a factory reset.
2) Open Odin Downloader.
3) Turn system off and go into Download mode.
4) Connect device to PC using USB cable.
5) Odin should recognize your phone now, if not: Check if Samsung Drivers have been installed correctly.
6) Click on PDA and add the file you have just downloaded from sammobile.
7) Make sure ''Auto Reboot'' and ''F. Reset Time'' is enabled.
8) Press start and wait untill the installation is finished.
9) Done.
If you are not familiar with this, ask me for more details and I'll explain more.
Jhamat123 said:
Hi guyes, I really messed up tired to install a rom on my S3 Mini (CM 11.0 KitKat) came up with status 7 installation aborted
, backed out rebooted the phone goes straight into CWM wiped the davlik cache and cache, rebooted the phone same boot again straight into CWM, took out battery gave it 2 minutes no help. Really need some help Please:crying:
Click to expand...
Click to collapse
Download MaclawStudio’s TWRP Recovery v2.6.3.0
flash it whith CWM and flash rom again
it will solve your problem
It's working!
Thank you guys. Since yesterday I had the bootloop problem and tried everything to solve it. Flashed various stock roms and nothing worked. Now this one worked. Thank you again!
Related
Hi folks,
I tried updating my S plus to ICS today by following the instructions listed here:
theandroidsoul.com/galaxy-s-plus-i9001-ice-cream-sandwich-update-install-cyanogenmod-9-cm9-pretty-good-and-working-rom
I read through the instructions and it looked pretty simple. I successfully installed Team Win recovery, performed a backup, wiped, and then installed the CM9 rom.
After the installation, the phone just boots back into Team Win recovery. I tried reverting to the backup, but it still just boots to recovery every time.
Now that I'm stuck in TeamWin recovery, I'm at a loss on what to try next .
Does anyone have any insight on how I can fix the problem?
Thanks,
Evan
Sometimes when you flash new Recovery (usually when replacing stock recovery with modified recovery for the first time) you get stuck at bootloop. It means /boot partition was damaged. After flashing TWRP did you restart your phone and it booted correctly, or did you install everything (TWRP, got backup, wipe and install new ROM) at once?
There is a guide for i9001 bootloops
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop
divibyzero said:
Sometimes when you flash new Recovery (usually when replacing stock recovery with modified recovery for the first time) you get stuck at bootloop. It means /boot partition was damaged. After flashing TWRP did you restart your phone and it booted correctly, or did you install everything (TWRP, got backup, wipe and install new ROM) at once?
There is a guide for i9001 bootloops
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop
Click to expand...
Click to collapse
So is reflashing in Odin what you are suggesting? Sorry if I'm misunderstanding.
And yes, after I flashed TWRP it booted fine, the 2nd time I went into recovery, performed the backup, wiped, then flashed the rom. I've tried wiping both the cache's with no success. I've also tried reflashing the rom, wiping the cache's, restoring with the backup, wiping cache's again... nothing seems to be working
What would be different if I had installed everything (TWRP, backup, wipe, rom) at the same time?
*Edit* Reflashed through Odin and it worked great! Thanks for the help, I'm a little scared to start messing with the phone again, but ICS is tempting...
Got the rom working with a fresh backup after fixing the bootloop. Thanks again for the link divibyzero, the troubleshooting steps solved the problem, whatever it was, and now its running ICS
These Samsungs S+'s seem to be a little more finiky than my HTC.
I am still stuck in CWM Recovery mod ! When I start Download mode, I dont have ODIN option ..only Download mod start screen! Can anybody help me?
Dapper SRB said:
I am still stuck in CWM Recovery mod ! When I start Download mode, I dont have ODIN option ..only Download mod start screen! Can anybody help me?
Click to expand...
Click to collapse
What do you mean by "don't have ODIN option"?
Is bootloader.tar which used to repair bootloop problem usable on ICS roms for SGS+??
alireza7991 said:
Is bootloader.tar which used to repair bootloop problem usable on ICS roms for SGS+??
Click to expand...
Click to collapse
yup, you can use bootloader or http://forum.xda-developers.com/showpost.php?p=32655216&postcount=17 CWM with AriesVe.ops
evan8683 said:
Hi folks,
I tried updating my S plus to ICS today by following the instructions listed here:
theandroidsoul.com/galaxy-s-plus-i9001-ice-cream-sandwich-update-install-cyanogenmod-9-cm9-pretty-good-and-working-rom
I read through the instructions and it looked pretty simple. I successfully installed Team Win recovery, performed a backup, wiped, and then installed the CM9 rom.
After the installation, the phone just boots back into Team Win recovery. I tried reverting to the backup, but it still just boots to recovery every time.
Now that I'm stuck in TeamWin recovery, I'm at a loss on what to try next .
Does anyone have any insight on how I can fix the problem?
Thanks,
Evan
Click to expand...
Click to collapse
Hello guys,
I think have the same problem, this morning I installed the Team Win recovery and after a reboot my phone come into recovery mode and even after a furthr reboot I'm blocked in a bootloop that leads me always on Team Win recovery.
I tried to wipe cache, dalvik cache, factory reset and even a wipe of the system but nothing happen.
I reinstalled rom but without success.
There is a way to fix this through adb?
Advanced thanks for help
Max.
krisslake said:
Hello guys,
I think have the same problem, this morning I installed the Team Win recovery and after a reboot my phone come into recovery mode and even after a furthr reboot I'm blocked in a bootloop that leads me always on Team Win recovery.
I tried to wipe cache, dalvik cache, factory reset and even a wipe of the system but nothing happen.
I reinstalled rom but without success.
There is a way to fix this through adb?
Advanced thanks for help
Max.
Click to expand...
Click to collapse
You didn't specify, so I'll assume you have an i9001, if this is not the case, you probably shouldn't follow these instructions
Just reflash the bootloader as explained here (http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330) and you'll be fine. I had the exact same problem when I had installed CWM on my own device. It's not with adb, but it's not like you have to do a lot of effort to get Odin or anything and it will fix your device.
Marshian said:
You didn't specify, so I'll assume you have an i9001, if this is not the case, you probably shouldn't follow these instructions
Just reflash the bootloader as explained here (http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330) and you'll be fine. I had the exact same problem when I had installed CWM on my own device. It's not with adb, but it's not like you have to do a lot of effort to get Odin or anything and it will fix your device.
Click to expand...
Click to collapse
Luckily I found a windows system
Istructions you report was perfect for my case...seem I solved my problem...thanks again.
There is some i need to do for report I solved my problem ?
Bye Max.
[Boot-Loop] Can I use dd to flash bootloader?
Guys, has anyone tried to use dd to flash bootloader partition?
I assume dd if=boot.img of=/dev/block/mmcblk0p8 bs=512 should work
Can somebody attach boot.img taken with dd so I could test?
error - can t acces system csc/cnx/system
hello. I have a problem. I had installed on the phone cm10. Now I switched to cm 9 but since we locked in botloader and I returned with odin. recowery mode now you did not have the option install from sd / card only update. My problem is that now go phone but I can not install gapps. ie install it says the installation is complete, restart give when I see me many times with yellow writing including my error appears so: can t access system csc / CNX / system. and after I start the application from google. to say you've tried many variations and if you try recovery-clockwork-5.5.0.4-phone crashes every time. Please help ... (I tried many variations of gapps). thanks in advance.back with another caveat: any clockwork I try to install say installation aborted. and in the recovery mode screen down to write I / / / status = 0 / / /
evan8683 said:
So is reflashing in Odin what you are suggesting? Sorry if I'm misunderstanding.
And yes, after I flashed TWRP it booted fine, the 2nd time I went into recovery, performed the backup, wiped, then flashed the rom. I've tried wiping both the cache's with no success. I've also tried reflashing the rom, wiping the cache's, restoring with the backup, wiping cache's again... nothing seems to be working
What would be different if I had installed everything (TWRP, backup, wipe, rom) at the same time?
*Edit* Reflashed through Odin and it worked great! Thanks for the help, I'm a little scared to start messing with the phone again, but ICS is tempting...
Click to expand...
Click to collapse
Hi Evan which release of Odin did you use I am also facing the same problem for the past 28 hours and not been able to resolve it. The problem is thay the Com Port does not pop up basically the phone is not being recognised by the computer.
Please help.
sunbaj said:
The problem is thay the Com Port does not pop up basically the phone is not being recognised by the computer. Please help.
Click to expand...
Click to collapse
You must properly install Samsung mobile drivers on your PC, kill Samsung Kies process (or even better: uninstall Kies) and enable USB debugging on your phone. Then it will work.
tetakpatak said:
You must properly install Samsung mobile drivers on your PC, kill Samsung Kies process (or even better: uninstall Kies) and enable USB debugging on your phone. Then it will work.
Click to expand...
Click to collapse
The problem was that I was using Windows 8. I was able to resolve the issue after doing it on Windows XP.
I'm a noob I know and yes I watched the noob-video. But I need help! Cuz I'm too dump! So please help me
I wanted to update my Galaxy S Plus to the newest CM 10 (Beta 4) (before it was the Beta 3) over the CWM recovery it suddenly says
"symlinks failed"
"error in /sdcard/cm-10-20130324-invendor-beta4-ariesve.zip"
"(Status 7)"
"installation aborted"
so I looked to the CWM recovery and I saw that I don't have the latest version....okay I downloaded the latest one and installed it over the CWM recovery. The same error .... with friends. Now I got when I went into the CWM recovery: (after I tried to wipe data/factory reset or wipe cache)
"E:Can't mount /cache/recovery/log"
"E:Can't open /cache/recovery/log"
"E:Can't mount /cache/recovery/last_log"
"E:Can't open /cache/recovery/last_log"
I tried to restart the phone...black-screen after the samsung cyanogen mod screen.
Okay
So I tried to flash a older firmware "I9001XXKQ7_I9001DBTKP2_I9001XXKPK_HOME.tar.md5" with Odin. I restarted the phone...nope black screen. I installed the newest CWM recovery again and tried to flash again the CM 10. Black-screen. So I tried the old version of the CM which I had before (Beta 3) -> black-screen and still errors in the recovery mode.
I can still go into the download mode and the recovery mode. The charging symbol is not working when i connect it (just the battery but bot moving)
My device:
Samsung Galaxy S Plus
Provider: Vodafone IT
ROM: CM 10 (Beta 3) installed but not working
Kernel: Phenom 3.2 UV (updated after the symlinks failed error)
I hope some genius out there can help me
And sorry for my bad english...I don't use it often (Italy)
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Thanks!
Hey! Thanks a lot! I'll try it out and report it if its working :good:
EwOkie said:
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Click to expand...
Click to collapse
!!!!!!!!
dont download the files there!
i think they are for i9000, but the thread starter has an i9001
!!!!!!!!!
have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco
edit: just found
http://forum.xda-developers.com/showthread.php?p=39640245
Regards
Okay
Okay! I didn't do it yet sooo ... I'll try that one and thanks for the link! :good:
then...?
"have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco"
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Imanidiot said:
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Click to expand...
Click to collapse
take your time...
what errors does the cwm 5.5.0.4 recovery shows without doing anything?
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Hi everybody I'm new.
My situation is exactly the same, I did the same things, got the same problems... got stuck with no solutions yet if not to send it to samsung assistance.
Flashad many other android phones in the past and never had issues like this... it's a nightmare...
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Click to expand...
Click to collapse
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Imanidiot said:
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Click to expand...
Click to collapse
I also tried the broodROM RC5, succesfully flashed with Odin but still the same problems as before.
Can't format /data.
Stock-Firmware
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Imanidiot said:
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Click to expand...
Click to collapse
I already did that too but it didn't work...
I'm gonna go to the samsung assistance in the afternoon... :crying:
Well....Nothing is working...Anyone who could help me? ... Or better us..
If my guide is no use to you as its for i9000 : try this HERE
If that helps you in any way let me know.
I did this already... I flashed it with the newest stock-FW but it doesn't do anything...and the stock-recovery can't make a factory reset. It always freezes....
other things that could be worth a try:
try flashing different recoveries - not only feamod... also cwm,...
for me cwm5.5.0.4 works
look: our wiki-page -> un-brick
if all doesnt help you could try to reset all partitions
I tried already a few recoveries...like the CWM or the TeamWin... How can I reset them? Can you give me a link please? ^^
Flash BroodROM RC 5... flash this multiple times without touching any buttons like repartion etc..
After that, wipe system and data via the recovery provided in the ROM.
Then flash the newest stock FW from samsung..
This solved all my issues multiple times xD
thanks for the reply, but my phone is now finally brocked....it doesn't even start....and I don't have any idea what i can do now...
??
So, now Samsung, no Samsung Galaxy S Plus GT-I9001? No nothing. Not even the soft brick image (see wiki)
I started with a new S3 Mini (Branding Android 4.1.2 ). Using the SAMSUNG GALAXY S3 MINI TOOLKIT Pro, (mskip) i rooted it and flashed also the CMW Recovery. Within the CMW Recovery i made a Backup before i flashed a CUSTOM-ROM ( "enox reVenge one" ROM ).
Flashing went trough without Errors, afterwards i did a "wipe factory reset", a "wipe cache" and a "wipe dalvik cache". Then after a reboot the "disaster" was there with a permanent bootloop (Samsung starting Screen with model, etc.) and i couldn´t get into Recovery mode anymore. As i found out, the Download mode still worked and i could still flash using ODIN. but odin don't work Flash installed programs goldenxx_PIT_file put the boot in place. Handset is stuck on the logo. downloading mode is used, but is not recognized as a odin. Recovery dont goes. Zune does not have any drivers. Several specialists have failed. PLEASE HELP ME
Hpou said:
I started with a new S3 Mini (Branding Android 4.1.2 ). Using the SAMSUNG GALAXY S3 MINI TOOLKIT Pro, (mskip) i rooted it and flashed also the CMW Recovery. Within the CMW Recovery i made a Backup before i flashed a CUSTOM-ROM ( "enox reVenge one" ROM ).
Flashing went trough without Errors, afterwards i did a "wipe factory reset", a "wipe cache" and a "wipe dalvik cache". Then after a reboot the "disaster" was there with a permanent bootloop (Samsung starting Screen with model, etc.) and i couldn´t get into Recovery mode anymore. As i found out, the Download mode still worked and i could still flash using ODIN. but odin don't work Flash installed programs goldenxx_PIT_file put the boot in place. Handset is stuck on the logo. downloading mode is used, but is not recognized as a odin. Recovery dont goes. Zune does not have any drivers. Several specialists have failed. PLEASE HELP ME
Click to expand...
Click to collapse
what version of odin have you used?
please provide the link to the pit file that you used and step by step of what you have tried so far not missing out a detail
the more information provided the better the solution
hope you didn't pay the "specialists"
efaustino84 said:
what version of odin have you used?
please provide the link to the pit file that you used and step by step of what you have tried so far not missing out a detail
the more information provided the better the solution
hope you didn't pay the "specialists"
Click to expand...
Click to collapse
thanks for reply
but here are problems:When I turn on phone it stay in the logo and that will not go to recovery. downloading mod to go but no matter how I tried a few specialized Android phone by Odin we have not even tried to know..nothing nothing
Hpou said:
thanks for reply
but here are problems:When I turn on phone it stay in the logo and that will not go to recovery. downloading mod to go but no matter how I tried a few specialized Android phone by Odin we have not even tried to know..nothing nothing
Click to expand...
Click to collapse
Can you post a log from odin?
Sent through time and space from my s3mini/CM11
Hey everybody!
I have a big problem! I tried to upgrade my samsung galaxy i9000 4.2.1 to kitkat, but it failed. i know where the problem was, but now, i have a different problem.
My phone doesn't want to start. when i press the power button it just pups up the intro screen Galaxy s GT i9000 and nothing happens. I can go to download mode and clockwork recovery mode.
Since the first failed attempt i have many times factory reseted, wiped cache partition and dalvik cache.
i hope that i didn't screw up my phone and that somebody will help me.
Sorry for bad english
petek92 said:
Hey everybody!
I have a big problem! I tried to upgrade my samsung galaxy i9000 4.2.1 to kitkat, but it failed. i know where the problem was, but now, i have a different problem.
My phone doesn't want to start. when i press the power button it just pups up the intro screen Galaxy s GT i9000 and nothing happens. I can go to download mode and clockwork recovery mode.
Since the first failed attempt i have many times factory reseted, wiped cache partition and dalvik cache.
i hope that i didn't screw up my phone and that somebody will help me.
Sorry for bad english
Click to expand...
Click to collapse
Okay, the fact you can go to download mode and CWM is excellent. The factory reset and wiping wont fix as their isn't an OS there due to it not installing properly. Just download another ROM to your SD as your current one appears to have an error and flash through CWM.
If that fails use odin and download mode to flash stock ROM on to your phone for a usable device
TechMinerUK said:
Okay, the fact you can go to download mode and CWM is excellent. The factory reset and wiping wont fix as their isn't an OS there due to it not installing properly. Just download another ROM to your SD as your current one appears to have an error and flash through CWM.
If that fails use odin and download mode to flash stock ROM on to your phone for a usable device
Click to expand...
Click to collapse
I used odin and flash stock ROM and it worked!
Do you have a toturial how to upgrade my galaxy i9000 GT gingerbread to kitkat? )
I tried many of them, but always is a step missin or something goes wrong
thank for the hel!
Se yaaa
petek92 said:
I used odin and flash stock ROM and it worked!
Do you have a toturial how to upgrade my galaxy i9000 GT gingerbread to kitkat? )
I tried many of them, but always is a step missin or something goes wrong
thank for the hel!
Se yaaa
Click to expand...
Click to collapse
To be honest its pretty much a generic tutorial for all, just download the KitKat ROM for your phone allong with its Gapps.
Now download the CWM verson for your phone and flash it like before
Once flashed boot your phone up to make sure it works, then copy the ROM and Gapps across. Now boot back into recovery and make a nandroid backup, then select the wipe data/factory reset option and the wipe cache options. Then flash the ROM and Gapps and your phone should have Kitkat
Hello, I have a problem with my phone and I need some help.
I tried to install Kit Kat 4.4.4 using recovery mode (CWM), the install process ran smoothly but it had some issues so I tried to install Lollipop 5.1.1 (CyanogenMod 12.1) 20150412 stable from novafusion using TWRP (v.2.8.1.0) but apparently I made some mistakes, I used the Advanced Wipe tool and deleted (Dalvik cache, System, cache, data, internal storage) after this I can not install any moded ROM.
The phone stays on the "Samsung Galaxy s3 mini" screen.
Can somebody help?
My phone model is GT-i8190L
looks like you need to head over to http://http://www.sammobile.com/firmwares/, login & d/l original firmware for ur fone & region, then flash via odin, & start root,custom flash again.............carefully this time & be sure to make full nandroid backup before flashing so you can restore if problems occur......good luck & post again if you need more help
beerwolf-crowe said:
...
Click to expand...
Click to collapse
Friend but as I do if odin does not recognize my device?
Now install the drivers and still recognize it.