Database Develop

[Q] What to do, keeps rebooting?

my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me

When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot

You could try Recovery mode and wipe.
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,

help please
donACEsko said:
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
Click to expand...
Click to collapse
but my buttons vol down and vol up doesn't work

lgo51 said:
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
Click to expand...
Click to collapse
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB

RTFM !
keki92 said:
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
Click to expand...
Click to collapse
The keys needed are: POWER and HOME
The keys not used are: VOLUME +/-

keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.

I think he(or she) want a stock rom only. You need to do a full wipe after flash with odin. Maybe touch recovery helps you, but i cant find any . You can go to download mode by "adb reboot download" , i think it cant success without wipe.
Or maybe try to flash a rom with 5 files as SuperAce609 said.

No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.

yeowwwai said:
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
Click to expand...
Click to collapse
no need for that bro !!!!
@OP
just go to recovery > factory reset(wipe data)
and then reboot......Ur done
so simple.....

lol. u guys didnt even try to understand what his problem in the first place. atleast read the first post properly before giving suggestions.
the poor guy had his vol up and down button broke, and u suggest him to wipe data in recovery.
thing is his vol up and downn button doesnt work! so how can he navigate in recovery? lol
btw op, u said that u flashed onepackagee file via odin. so how did u manage to go into download mode in the first place when your vol down button is busted?
if u managed to go into download mode again, this time flash the full package instead.

SuperAce609 said:
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
Click to expand...
Click to collapse
I am having the same problem.
The phone keeps rebooting on startup. The phone can go in download mode but can't go in recovery mode.
Do you know any good link to download multi file package? I can't seem to find it anywhere

which Rom You were using and which firmware do you want?

keki92 said:
which Rom You were using and which firmware do you want?
Click to expand...
Click to collapse
My phone was running 2.2.1 Froyo. I tried to upgrade it to 2.3.6 using process mentioned here. http://androidadvices.com/update-gal...wktm-firmware/
The Odin completed successfully and restarted the phone. But the phone was running spanish language. I was getting an alert after every 3-4 seconds. But i could not read it as it was spanish. I restarted the phone and it went in boot loop. The phone keeps rebooting every 2 seconds.
I can't get into recovery mode but I can get to download mode.
I have tried flashing many ROMs from sammobile.com but none of them is working.

Struck at recovery black screen

Hi Guys,
I'm using Paranoid 4.6 beta5 i tried using power + vol up + home button to enter into the recovery mode but it just displayed a black screen. Now the crazy thing I did was I downloaded reboot to recovery app and used it and ever since then i am struck at the black screen i see samsung logo and then just black screen no paranoid boot animation what do i do now ?
Solution:
If someone falls in the same boat here's how i resolved it i connected the usb to my pc and did i restart which made it reboot in safe mode then i unplugged it and did a reboot from the power button and voila everything is back to normal

You need to flash a kernel or stock ROM in PC Odin and get recovery back
Sent from my GT-I9205 using Tapatalk

Try this:
I didn't experience any data loss but cant guarantee anything.
1. Download this http://d-h.st/HJM
2. Flash with PC Odin (Add via PDA button and make sure ONLY Auto reboot is checked)
3. Wait till completed
4. Boot into recovery (Which will now be CWM)
5. Do a factory reset and wipe cache and dalvik cache
6. Reboot
7. Enjoy
8. Smash my thanks button (Please.....)
Note: You will now be on Gingerbread 2.3.5 Rooted + CWM, and you're good to go.

[Help] My Xperia SP Doesnt turns on

Well today i tried to install CM 11 on my xperia sp
First i installed CWM on my device and then i rebooted teh device and formatted every thing including Dalvik Cache
and then i installed the CM 11 zip and rebooted the device
After that my device doesnt starts, i tried holding the back small button it just vibrates
and also i tried (power button + volume up/down button) it just vibrates and shows green and blue light
I need to turn it on, Pls help me anyone pls :crying:

Aɪʀʙᴏʀɴᴇ said:
Well today i tried to install CM 11 on my xperia sp
First i installed CWM on my device and then i rebooted teh device and formatted every thing including Dalvik Cache
and then i installed the CM 11 zip and rebooted the device
After that my device doesnt starts, i tried holding the back small button it just vibrates
and also i tried (power button + volume up/down button) it just vibrates and shows green and blue light
I need to turn it on, Pls help me anyone pls :crying:
Click to expand...
Click to collapse
Read guides more carefully. You wipe everything before installing a new ROM. Wipe, reinstall.

Aɪʀʙᴏʀɴᴇ said:
Well today i tried to install CM 11 on my xperia sp
First i installed CWM on my device and then i rebooted teh device and formatted every thing including Dalvik Cache
and then i installed the CM 11 zip and rebooted the device
After that my device doesnt starts, i tried holding the back small button it just vibrates
and also i tried (power button + volume up/down button) it just vibrates and shows green and blue light
I need to turn it on, Pls help me anyone pls :crying:
Click to expand...
Click to collapse
Flash any Kernel based on CM11 using flashtool.( you can get flashtool by their main site).
Boot to CWM recovery.
wipe data/factory settings.
wipe cache.
advance> wipe dalvik cache.
Then install your ROM zip.
If this doesnt help, download the original firmware and using flashmode in flashtool, flash that you will get your original rom back but you will lose Root.

[Q] flash mode is not working on xperia z

In my Xperia Z, I am using Infected Builds Cyanogenmod 12.1 Lollipop rom
All things like Usb debugging, ADB, fast boot are working but that flash mode is not working......
when I press Vol down while connecting it turns Green but suddenly goes into red, I tried these things below
1) Using Flashtool
selecting flash mode then the ftf file and I waited for the notification to appear connect your phone
then I connected my phone pressing vol down again it turns into green but suddenly goes into Red
2) Using PC companion
I tried Repair Option, but that one also said me to connect my phone in flash mode
I also tried pressing vol up+ power button for a while to occur three vibrations (i.e complete shutdown) thn tried connecting to my pc while pressing vol down
3) Using Fast boot
I tried to flash Original boot.img but that too didnt work I dont know what else to do............
I am able to install new roms via recovery but I want install Original Stock Rom but Flashmode is not working If Anyone knows how to solve this prob please help me..............

kathir10395 said:
In my Xperia Z, I am using Infected Builds Cyanogenmod 12.1 Lollipop rom
All things like Usb debugging, ADB, fast boot are working but that flash mode is not working......
when I press Vol down while connecting it turns Green but suddenly goes into red, I tried these things below
1) Using Flashtool
selecting flash mode then the ftf file and I waited for the notification to appear connect your phone
then I connected my phone pressing vol down again it turns into green but suddenly goes into Red
2) Using PC companion
I tried Repair Option, but that one also said me to connect my phone in flash mode
I also tried pressing vol up+ power button for a while to occur three vibrations (i.e complete shutdown) thn tried connecting to my pc while pressing vol down
3) Using Fast boot
I tried to flash Original boot.img but that too didnt work I dont know what else to do............
I am able to install new roms via recovery but I want install Original Stock Rom but Flashmode is not working If Anyone knows how to solve this prob please help me..............
Click to expand...
Click to collapse
try changing the file extension from .ftf to .zip and flash via recovery

natibongo said:
try changing the file extension from .ftf to .zip and flash via recovery
Click to expand...
Click to collapse
I tried it, its not working

kathir10395 said:
I tried it, its not working
Click to expand...
Click to collapse
Then perform factory reset and try again by enabling USB debugging and unknown sources

Xperia Z1 doesn't work after install ROM

Hellow everybody,
Last days I updated my phone to 5.1.1 official, to check nnew state. This update erase my root status, and I had to begin all the root process, and I did:
1) kingroot
2) SuperSU
3) Install dualrecovery (PhilZ touch)
4) Wipe davil, memory, erase internal memory and sdcard
5) Store Download: cm-12.1-20151223-NIGHTLY-honami.zip (292.74 MB) in sdcard
6) Install zip (rom)
7) Reboot phone
And here it's the problem, my phone doesn't reboot.
Without USB connected:
Normal starte: red led blink
If I press power button, power button + volume up, power button + volume down; nothing happen
USB pulgged:
Normal state: nothing happen
Power button pressed: nothing happen
Power + volume up: red led, blue led, any led, and the cycle is repeated
Power + volume down: red led, green led, any led, and the cycle is repeated
Any idea? How can I do?
It seems too bad.... I think a new movil is coming...
Thank you and regards...

Is the boot-loader unlocked? if not then you have to unlock it to install source based ROM like CM .
To restore your phone and unlock the boot-loader :
1. Flash the phone with a stock ROM using flash-tool to restore it.
2. Backup your TA partition in case you want to re-lock it again ( and to restore DRM keys ).
3. Unlock the boot-loader using Sony method (this will wipe all your phone so make sure to backup what you want).
now you have to repeat the steps you did before or flash a kernel that have a recovery builtin and jump to step 5.

I guess bootloader is still alive then.
Power off by keep pressing pw button by few seconds.
(* If it doesn't work, open the usim tray slot and press reset pin for few sec)
And.. enter the flashmode and just flash a stock firmware using flashtool.
I made a foolish mistake before- wiped system partition and reboot without flashing any firmware. However even there's no OS installed, flashmode was worked.

Thank you so much!!!!! I will try today, your news sound great! Anyway, I will post my progress (or not).
Thanks again and regards!
Edit: As Abdu99andy and PielunA says, it was solved using flashtool.
Just add a thing, it was not neccesary to flash a new rom. My device works with the previous rom flashed (CM 12.1).
Thanks!
Abdu99andy said:
Is the boot-loader unlocked? if not then you have to unlock it to install source based ROM like CM .
To restore your phone and unlock the boot-loader :
1. Flash the phone with a stock ROM using flash-tool to restore it.
2. Backup your TA partition in case you want to re-lock it again ( and to restore DRM keys ).
3. Unlock the boot-loader using Sony method (this will wipe all your phone so make sure to backup what you want).
now you have to repeat the steps you did before or flash a kernel that have a recovery builtin and jump to step 5.
Click to expand...
Click to collapse
PielunA said:
I guess bootloader is still alive then.
Power off by keep pressing pw button by few seconds.
(* If it doesn't work, open the usim tray slot and press reset pin for few sec)
And.. enter the flashmode and just flash a stock firmware using flashtool.
I made a foolish mistake before- wiped system partition and reboot without flashing any firmware. However even there's no OS installed, flashmode was worked.
Click to expand...
Click to collapse

You must unlock bootloader before installing CM.
Also, Philztouch sometimes cracks the rom. Use TWRP.