Database Develop

[i9023] [Review] Momax iCase Pro for i9023 with lots of photos! (fits the NS4G too)

*** All the photos below are hosted on imageshack. somehow they don't show up if you're using the XDA app. So if you are viewing from your phone, please use your browser. Sorry for the inconvenience! ***
Introduction
Hi everyone, as we the i9023 users know, it's so difficult to find a case that fits our phone.
Almost every case out there are made for the slightly slimmer i9020, and they will not fit the i9023 properly.
I came across this Momax icase pro which specifically states that it is made for i9023, so i decided to give it a try.
Just to share with you guys, this is my review of the case.
The Details
I ordered mine from iooMobile. It was shipped to me within 2 weeks.
So here we go, it comes in a nice looking, well packaged box:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Out of the box, the case has a printed Momax logo at the bottom, cut-out holes are available for the 3.5mm jack, USB port, camera + flash, as well as the loud speaker.
As for the power button and volume rocker, they are covered by the soft pertruding TPU (which i didn't like, because i can't feel the buttons)
It is made of 2 different materials.
The translucent part is made of hard rigid polycarbonate plastic
The black part is made of soft TPU
The case does bulk up the phone quite a bit (it's subjective though):
So i slot the phone into the case easily due to the soft TPU edge...
Nice big and spacious cut-out holes for the 3.5mm jack, microphone and USB port
Still got lots of room to spare after plugging in, so the case doesn't obstruct anything:
camera + flash and speaker fit perfectly into the holes on the rigid polycarbonate backing
The case is tailor-made for the i9023, the TPU part wraps around the edge of the phone comfortably:
Like i mentioned earlier, i didn't like the covered up power button and volume rocker, because i cannot feel them when pressing. So i cut out the soft TPU to expose the buttons:
Overall Look
Front:
Back:
Extras
I almost threw the plastic box away, and luckily i checked.
To my surprise, it came with a screen protector and a cleaning cloth!
The Verdict
Pros:
- the rigid polycarbonate backing gives a nice solid feel. Somehow the phone feels more sturdy and well protected. Also love the texture and look of the frosted surface
- soft TPU material provides more grip when holding, also allows the phone to slip in and out of the case easily
- one of the few cases that is made for the i9023
- only US$11.50 (from ioomobile, includes a screen protector too!
Cons:
- bulks up the phone a little
- can hardly feel the buttons (volume and power) when pressing because they were covered by the soft TPU
Overall:
Awesome case at a very reasonable price. I would recommend this to all i9023 users who are looking for a decent and not expensive case. It may not be able to match up with the quality of rinke or casemate though, so this is not for users who are looking for top quality cases.
_______________________________________________________________________​
Updates:
[08 June 2011]
post by co2m in the other thread, includes 2 photos of the white momax case

I got a 4G and was wondering if the edges flap around or are they snug? I have the Ringke case and like it but working in construction, the sides opening really kill it with letting in dust. Thanks!

Thanks for the great review.

Brutus2TheMax said:
I got a 4G and was wondering if the edges flap around or are they snug? I have the Ringke case and like it but working in construction, the sides opening really kill it with letting in dust. Thanks!
Click to expand...
Click to collapse
Well, the edges don't flap around easily, but they don't hug the phone tightly as well. I'm not too sure how loosely your rinke case is, are you using the rearth rinke?

tadaha said:
Well, the edges don't flap around easily, but they don't hug the phone tightly as well. I'm not too sure how loosely your rinke case is, are you using the rearth rinke?
Click to expand...
Click to collapse
Yessir I am.

Mine just shipped from HK yesterday. Can't wait for it to arrive. When the TPU covers the power button and vol. rocker, is it difficult to press the buttons? Or was it just a matter of personal preference that you didn't like having the buttons covered?

info5i2002 said:
Mine just shipped from HK yesterday. Can't wait for it to arrive. When the TPU covers the power button and vol. rocker, is it difficult to press the buttons? Or was it just a matter of personal preference that you didn't like having the buttons covered?
Click to expand...
Click to collapse
I believe it is more of a matter of personal preference.
It is not difficult to press, it is just that with the TPU covering the buttons, i cannot feel the 'click' when you pressed them, if you know what i mean. I just didn't like that haha.

tadaha said:
I believe it is more of a matter of personal preference.
It is not difficult to press, it is just that with the TPU covering the buttons, i cannot feel the 'click' when you pressed them, if you know what i mean. I just didn't like that haha.
Click to expand...
Click to collapse
That's good to know. Thanks

its cool
thanks for the review

Brutus2TheMax said:
I got a 4G and was wondering if the edges flap around or are they snug? I have the Ringke case and like it but working in construction, the sides opening really kill it with letting in dust. Thanks!
Click to expand...
Click to collapse
I just got mines today and the flaps fit perfectly snug. A very nice case.

Has anyone tried this on the ns4g?
Sent from my Nexus S 4G using XDA App

xxproblemzxx said:
Has anyone tried this on the ns4g?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
The guy that posted RIGHT INFRONT of you just said it fits perfect! 1 page isn't so hard to scim!

Brutus2TheMax said:
The guy that posted RIGHT INFRONT of you just said it fits perfect! 1 page isn't so hard to scim!
Click to expand...
Click to collapse
Lol I read it too. Just didn't notice the "4G" in the quote above it aha
Sent from my Nexus S 4G using XDA App

Lol, yeah. I recommend everyone with a Nexus 4g, get this case. I've bought 2 other ebay cases and the Sprint black TPU case and this is my favorite.

tgigh said:
Lol, yeah. I recommend everyone with a Nexus 4g, get this case. I've bought 2 other ebay cases and the Sprint black TPU case and this is my favorite.
Click to expand...
Click to collapse
Oh cool, so it fits the NS4G as well?
Can i quote you and update this in the OP for the benefit of all NS4G users?

Reminder no direct linking aka ADVERTIZING of products here in XDA

AllGamer said:
Reminder no direct linking aka ADVERTIZING of products here in XDA
Click to expand...
Click to collapse
noted and sorry!

AllGamer said:
Reminder no direct linking aka ADVERTIZING of products here in XDA
Click to expand...
Click to collapse
No disrespect or anything but no direct linking to anything? Isn't that the whole point of these forums? To find and share information? I'm not being mouthy or anything but I think people should be aloud to link where they bought things. How else are other people suppose to find it? PMing everyone that wants info on it is kinda outrageous don't ya think?

I got this case for 8 bucks from the one largest online computer retailer in Canada. No links cause of the rules, but is 4 letters and starts with N. Fits perfect but not a big fan of ghe included screen protector. I would recommend this case.

AllGamer said:
[REMINDER!] No ADVERTIZING or direct linking of products as a "review" in XDA
You may mention the names and model, but not linking the item.
the same applies to Video reviews, web address included verbally or text are forbidden.
Click to expand...
Click to collapse
This was from the pinned thread. So i guess names and brands can be mentioned, just no direct linking. So it's ok to spell out which shop you buy from as long as you don't provide a direct link or URL to the shop's website.

[REVIEW] Nillkin Hard Case

Today I took receipt of 2 Nillkin Hard Cases for the GT-N7100 Galaxy Note (One brown, one Red.)
I bought them from eBay for around £6 each delivered, the quality is surprisingly good, I wasn't keen on having a TPU or Soft Silicone case, or the flip case that I had for my original Note. So I thought I'd give this one a try.
You can see that it comes well packaged, not just in an envelope as is usually the case from Chinese suppliers of such products.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It also includes a screen protector, I've not yet fitted that, as I already have one fitted that's in good condition.
As you can see from the next set of photos, it doesn't really add a great deal of bulk, which is another reason I didn't want a TPU or Silicon case.
Granted I can't see it protecting the phone from a massive fall, but I wanted to keep the svelte lines as much as I could, whilst adding some grip, which it does nicely with the texture that is on the under side.
The fit is really snug, I had reservations at first, but once it's fitted it doesn't move at all, so I have no worries about it slipping off.
All-in-all I think it's a really good product, it adds protection from scratches for most of the phone, whilst not being too bulky, just enough thickness to save the camera lens from getting scratched when you put the phone down.
So if you're looking for a case and have similar requirements to my own, consider giving this one a try.

thank you for your return

Excellent review and photos,its a shame the case doesn't cover the top and bottom of the phone .

i just made a thread about this, but yours is nicer so....
I didn't like the fit at ALL until I just removed the back cover from my note 2 completely.
I don't really care about NFC so I'm okay with this. I like having a bit more lip too.
I find a couple of the edges a bit sharp. meaning if I hold the phone in landscape, my index fingers get scraped a little bit by the case edges.
I might sand them down or something.
The texture on the case is quite nice - pretty subtle but noticable when you hold it.

MISSDIVA said:
Excellent review and photos,its a shame the case doesn't cover the top and bottom of the phone .
Click to expand...
Click to collapse
I know what you mean, but at least it looks uniform all the way around, I had a couple of flip cases, one made by a company called Tenda, great case and had a similar hard back to it, that case did cover all the edges... except for one corner, it would have looked a bit daft if it didn't have the flip screen cover.
But because of the material, I think it would be a nightmare taking it off, if it did cover every edge, as because it's really stiff, you need some leverage when you do want to remove it.
ChodTheWacko said:
i just made a thread about this, but yours is nicer so....
I didn't like the fit at ALL until I just removed the back cover from my note 2 completely.
I don't really care about NFC so I'm okay with this. I like having a bit more lip too.
I find a couple of the edges a bit sharp. meaning if I hold the phone in landscape, my index fingers get scraped a little bit by the case edges.
I might sand them down or something.
The texture on the case is quite nice - pretty subtle but noticable when you hold it.
Click to expand...
Click to collapse
It might just be the batch you've got perhaps, I've just been around both cases, both on and off, and there are no sharp edges, in your case, a small nail file or wet'n'dry should do the trick.
I think I know what you mean about the fit, I too was a bit cautious as it "almost" sits flush with the screen, but there is a bit of a lip and I've shaken the hell out it and it's going know where haha.
Sent from my GT-N7100 using Tapatalk 2

I get one. Very slim charming
Sent from my GT-N7100 using xda premium

I received my black one yesterday. Yeah, it stinks that the top and bottom are exposed, otherwise it would be perfect.
If you're looking for the lightest, minimalist case, this is the one.
Honestly, you really can't go wrong with a product that says "SUPER COOL" on the packaging. :laugh:

uchosen said:
I received my black one yesterday. Yeah, it stinks that the top and bottom are exposed, otherwise it would be perfect.
If you're looking for the lightest, minimalist case, this is the one.
Honestly, you really can't go wrong with a product that says "SUPER COOL" on the packaging. :laugh:
Click to expand...
Click to collapse
Haha, yeah that made me chuckle when I read that. Lol.
Sent from my GT-N7100 using Tapatalk 2

RavenY2K3 said:
Today I took receipt of 2 Nillkin Hard Cases for the GT-N7100 Galaxy Note (One brown, one Red.)
I bought them from eBay for around £6 each delivered, the quality is surprisingly good, I wasn't keen on having a TPU or Soft Silicone case, or the flip case that I had for my original Note. So I thought I'd give this one a try.
You can see that it comes well packaged, not just in an envelope as is usually the case from Chinese suppliers of such products.
All-in-all I think it's a really good product, it adds protection from scratches for most of the phone, whilst not being too bulky, just enough thickness to save the camera lens from getting scratched when you put the phone down.
So if you're looking for a case and have similar requirements to my own, consider giving this one a try.
Click to expand...
Click to collapse
Thanks. I am expecting the black one. I love the texture look. I am hoping it feels like it looks.
Be careful though. It looks like you already have some scratches.
Sent from my SGH-T889 using xda app-developers app

Tweh said:
Thanks. I am expecting the black one. I love the texture look. I am hoping it feels like it looks.
Be careful though. It looks like you already have some scratches.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
There's a screen protector on my beast, they arrived 4 days before the phone haha

That's a really nice case you have there. I envy your adventurous nature in going for red, I'd be more conservative and go for grey or black!
Anyhow I was also looking at this similar case and thought it offers a little more protection around the top / bottom. Any opinions?
Sent from my Nexus One using xda app-developers app

cpm said:
That's a really nice case you have there. I envy your adventurous nature in going for red, I'd be more conservative and go for grey or black!
Anyhow I was also looking at this similar case and thought it offers a little more protection around the top / bottom. Any opinions?
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
I'd be more inclined to go for the one you've found, for that added protection, I have ordered a aluminum bumper and a flip case which I'll probably post a review about, unless someone already has.
I might buy the one you've posted about too lol.

Yeah I'm on the case hunt too. Already bought the S-Line with kickstand just yesterday. I also really like the look of the one I linked to above. I'm interested in this flip cover too , which I really like for its corner protection - should be protective enough for most falls and no magnet involved to interfere with the s-pen.
And worst of all, I don't even own a Note 2 yet. Crazy or what?!
Anyhow apologies for hijacking your useful review thread
Sent from my Nexus One using xda app-developers app

I have one. I think its more slippery than the back Dolf the phone itself!
Sent from my SGH-T889 using xda app-developers app

I ordered one a few days ago. Can you tell me approximately how long it took for delivery?
Thanks

ekerbuddyeker said:
I have one. I think its more slippery than the back Dolf the phone itself!
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Which case is that then as there's a few mentioned above? I'll stay away from that one once I know as the phone is slippery enough as is (from trying out in store).
Sent from my Nexus One using xda app-developers app

RavenY2K3 said:
Today I took receipt of 2 Nillkin Hard Cases for the GT-N7100 Galaxy Note (One brown, one Red.)
I bought them from eBay for around £6 each delivered, the quality is surprisingly good, I wasn't keen on having a TPU or Soft Silicone case, or the flip case that I had for my original Note. So I thought I'd give this one a try.
Click to expand...
Click to collapse
White ones look nice too, but its just hard to maintain the white from turning dull color. If you have time, please post some pics of your brown case

Raven
Who was your seller on ebay?

MISSDIVA said:
Raven
Who was your seller on ebay?
Click to expand...
Click to collapse
Original_Digi88 was the seller I bought mine from
http://www.ebay.co.uk/itm/190729775236?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D190729775236%26_rdc%3D1
For those interested, I have reviewed another product.
http://forum.xda-developers.com/showthread.php?t=1975267

nice
i wish they had it in malaysia

Official Samsung TPU Case (Lots of pics!)

I really like these cases.
Here are some pictures (sorry, I took them in low light with the Galaxy S3):
I got the black and white cases, I personally like the white one more, but the black is also nice.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case is very sturdy and very nice to the touch. It's kind of slippery, but it feels fine in the hand.
It doesn't hinder the Spen. I've had other cases for this note, and the original, and the Spen on some cases were impossible to take out
Buttons are easily accessible and they're raised! FINALLY! They're easy and clicky! Also, it has a charm loop or a lanyard loop.
Here are some pics of the black one
The cases are easy to apply and the phone basically snaps on, it's not a tight tight fit, but it's not going to come out on its own. It's snug in there, but you don't feel bad having to press really hard or anything like that to get the case off. It basically just comes out with ease.
These cases are going to be my daily drivers for a while, until something better comes along. I usually like Samsung cases. I love the S3 cases and now the Note 2 cases. The only thing I wish it had was the silicon flap to cover the USB or the headphone jack (or both!) to not let any dust in.
Hit thanks if this review has helped you or you just like the pics Or if you'd like me to continue reviewing cases I buy .
Thanks for reading!
Regards,
ZKYEVOLVED
Update: I have been getting a lot of PMs about where I got the case. I finally ordered it from here: CLICK, 15 euros.
On another thread (this thread) I had found some ebay links, and then I found some stores
All you need to do is search for the model number of the one you're looking for:
Black case: EFC-1J9BBEG
White case: EFC-1J9BWE
Pink case: I don't remember sorry!
Hope I've helped!
UPDATE: Today is my birthday, and last night I went out with some friends and I used this case. Oh my... The dark photos were ... let's just say that they could be used for Paranormal Activity 10! The white case gives off a reflection! Check this out. I don't recommend the white case if you're going to take night time pictures with flash. Without flash the pictures were fine, but the white edges of the case reflect and kind of destroyed the pictures. The reflection kind of threw off the rest of the picture (exposure, white balance, not to mention the spirit appearing at the bottom of my picture)!

Thanks for posting so many pics. I just ordered one of the white ones today and feel more secure in my decision after seeing your post. I'm currently using one of the generic "folio" type cases off of Amazon and was looking for something that was less awkward to use while I wait for Otterbox to release the Commuter/Defender cases.

It's disappointing to hear the cases are a little slippery. I was hoping for quite a bit of grip improvement.

DeoreDX said:
It's disappointing to hear the cases are a little slippery. I was hoping for quite a bit of grip improvement.
Click to expand...
Click to collapse
The back plate is a slippery (and on the black, it's a fingerprint magnet, as you can see!) but the sides are rubber, and it won't slide out of your hand if you're holding the sides. But the back itself is slippery. It's plastic... Of course it is! It's SAMSUNG!
Dual Boot said:
Thanks for posting so many pics. I just ordered one of the white ones today and feel more secure in my decision after seeing your post. I'm currently using one of the generic "folio" type cases off of Amazon and was looking for something that was less awkward to use while I wait for Otterbox to release the Commuter/Defender cases.
Click to expand...
Click to collapse
I'm glad to have helped! I'm really content with the cases. You can tell that they've been made specifically for this phone. All the details are there for the ports and buttons. It is actually slimmer than my other TPU cases.
I'm not a fan of folio cases because I don't want to cover the LED Notification light, or when it's open cover the camera! They're probably two of the most important features about this phone for me.

get the bodyglove :good:

Looks like a winner so far.. still waiting for one to arrive. For now using the body glove case
Sent from my SGH-T889 using xda app-developers app

+1 for this case, got mine in the mail today..

thanks! just ordered the white one based on the pictures (especially since my white tpu case from asia is taking forever to get here).
hope this case isn't too thick. i need a tpu case for accidental drops, but with minimal added thickness.

chuhsi said:
thanks! just ordered the white one based on the pictures (especially since my white tpu case from asia is taking forever to get here).
hope this case isn't too thick. i need a tpu case for accidental drops, but with minimal added thickness.
Click to expand...
Click to collapse
It's not too thick. Hehe. Its on par with other tpu cases if not thinner. It's very well planned.
Sent from my GT-N7100 using Tapatalk 2

zkyevolved said:
It's not too thick. Hehe. Its on par with other tpu cases if not thinner. It's very well planned.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Looks good in them pics! I checked my tracking number and looks like my black case is waiting for me at home :good:

I might just wait for the T-Mo D3O cases before deciding but these cases look good. I was hoping the interior would be silicone or something like those Speck cases.

Thank You for the review!
uchosen said:
Looks good in them pics! I checked my tracking number and looks like my black case is waiting for me at home :good:
Click to expand...
Click to collapse
What day did you order yours?
Sent from my SPH-L900 using Tapatalk 2

Jocelyn said:
Thank You for the review!
What day did you order yours?
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I ordered mine on the 25th and shipped out on the 27th. I'm in SoCal USA and it shipped from Dallas, TX.
Received and agree on all points. Fit is superb. Yeah, it's a little slippery on that glossy back piece but you're going to be gripping the rubbery sides so I wouldn't worry too much about it. Those raised plastic button covers on the sides for the volume and power are indeed nice and very assuring to the touch. It's not as thick as I thought it would be from seeing the pics.
Only con is it does add more weight than I would prefer but I feel more secure with the phone inside so I can deal with it.
My new favorite case over the Nilkin that exposed the top and bottom of the phone. :victory:

mine shipped today. I usually dont use cases, but i gotta say i loved the way the samsung cases looked on the GS3, looking so thin, i barely even noticed people had cases on them when i saw people pull them out. gotta love the samsung 50% off coupon too, ordered the tectiles and charging dock and battery. ( rE155266e coupon code)

I've received some PMs about where I got my cases from. It's a company here in Madrid. Their website is www.Octilus.com, they had the cheapest price I could find and their shipping was only 1€. I'm enjoying the cases highly recommended.
Sent from my GT-N7100 using Tapatalk 2

I was concerned about adding bulk to this sexy device, but I can safely say its a non-issue with this..

I got my black case yesterday and I'm very pleased with fit and finish. I don't think it's possible for a case to add less bulk and provide similar protection. The hard back does show finger prints and finger oil smears very clearly but no big deal and overall looks better than the T-mobile logo IMHO. Soft sides provide good grip and the charcoal gray color looks very good with the front bezels of titanium model. It didn't seem like a tight fit going on but doesn't seem loose in use. I imagine a little looseness is a good thing when it comes to shock adsorption and I believe the rubber sides will grip well enough to prevent the phone from separating during most falls. The edge surrounding the screen is raised enough to keep it from touching a flat surface when face down but just barely. I expect the screen could make contact if the phone is dropped on an irregular surface. I have a Spigen SGP Ultra Clear screen protector for that situation and highly recommend it as well. I can't even tell it's there from looks or function. Invisible to the eye and S-pen with cut outs for camera, proximity and light sensors as well as the speaker and home button. Feels like the native glass to finger and pen might actually feel better with a very very slight and benefitial increase in drag. So slight it may be imaginary.
,
Sent from my SGH-T889 using xda app-developers app

Got my white one today. Looks amazing. Now come on Verizon, send me my GN2!!! Getting the case is just a teaser!

Ordered the black for myself and white for the wife. Still waiting on them to get here, we usually only use Speck cases but since Speck has not came out with one yet These will have to do. Plus we got each of them for 50% off for registering our phones on the Samsung site.
Sent from my SGH-T889 using xda premium

Hi
Ordered my black case yesterday as it seems the only nice and simple case at this moment. Probably will get it middle of next week.
Thanks for all the pictures and comments, they confirm my choice
Sent from my GT-N7100 using xda app-developers app

[Review] Official Samsung case (NOT the flip case!)

So after my Nilkin case took a tumble and broke one of the edges by the volume rocker I wanted to review some other cases that offered more protection around the edges without adding bulk. The criteria was simple, stick as close to the thickness of the Nilkin as possible but add more protection.
Today I have the Samsung official case that Mobilefun have kindly sent me.
One thing is for certain, pictures make it look thicker than it actually is. The Nilkin case is barely any thinner but you get the added top and bottom protection on this Samsung case which gives the impression of a thicker case in images. In reality it feels more comfortable than the Nilkin due to the curvier shape and soft case bezel. I find it nicer to type with this case on as my fingers are no longer rubbing against the straight edge at the bottom like they would with the Nilkin and all other snap on cases like it.
Negatives:
I can spot one immediately which is that the back is glossy and as such does attract fingerprints, dust and scratches. Over time this finish will look tired like car paintwork that's seen sponges and machine car washes (I've yet to see a glossy black finish that doesn't end up this way on a gadget!) so bare this in mind. It might be possible to take a scouring pad to it like we did with the glossy Galaxy S2 bits back in the day
Regardless of the name "Hard case" it's not actually all hard, the Nilkin is harder. The back of the Samsung case is hard glossy plastic but the rest is harder flexible material and feels like it will take more of an absorbing impact.
Pics & final thoughts:
Vs Nilkin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's a £15 case so for once it's not unreasonably priced compared to the branded 3rd party cases out there (Casemate, Otterbox etc) given that it's an official accessory. I'm due a couple of other cases so will compare the lot in a few days but so far this Samsung case has impressed me. It will definitely take more of a beating than the Nilkin has and protect my phone at the same time... Which leads me on to beatings. Had I received this case a couple of days earlier I would not currently have a chip on the lower right of the screen on my handset after a nasty fall on brick stairs.
Such is life

I also use this case now and like it. Although got it slightly cheaper from amazon - around £10 ( http://www.amazon.co.uk/gp/product/B009KZ36ZM/ref=oh_details_o00_s00_i00 )
I was thinking of combining this case with the official flip case (to better protect the screen surface). Has anyone tried it? Does it work or the extra bulk of the flip case does not allow this protective case to be fitted?

Hmm not sure how the flip would work with this case on without cutting the soft side bits?

I tried the case mate tough first but the cutouts around the usb port and s-pen were too sharp and made the phone uncomfortable to hold.
Have the Samsung case on my wife's Note II and and liked it, have one myself now

robbiekhan said:
Hmm not sure how the flip would work with this case on without cutting the soft side bits?
Click to expand...
Click to collapse
I am not sure too - would be good to try it myself, but nobody of my friends with Note2 has a flip case.
I have seen this idea being implemented using a slightly moded UAG case (if I am not mistaken) and official flip cover. I think I saw it in this thread: http://forum.xda-developers.com/showthread.php?t=1931209
Update:
Here it is - look a short discussion around posts 1002-1010: http://forum.xda-developers.com/showthread.php?t=1931209&page=101
And another combination of a protective case with a flip cover: http://forum.xda-developers.com/showpost.php?p=38575302&postcount=1082

Wow.... Those photos.... So beautifully shot it made me tempted to get one myself too!

DaniLoveSky said:
I am not sure too - would be good to try it myself, but nobody of my friends with Note2 has a flip case.
I have seen this idea being implemented using a slightly moded UAG case (if I am not mistaken) and official flip cover. I think I saw it in this thread: http://forum.xda-developers.com/showthread.php?t=1931209
Update:
Here it is - look a short discussion around posts 1002-1010: http://forum.xda-developers.com/showthread.php?t=1931209&page=101
And another combination of a protective case with a flip cover: http://forum.xda-developers.com/showpost.php?p=38575302&postcount=1082
Click to expand...
Click to collapse
Hmm I'm still undecided on this, if you give it a try then be sure to post your thoughts and of course pics!
kEvinErd said:
Wow.... Those photos.... So beautifully shot it made me tempted to get one myself too!
Click to expand...
Click to collapse
Thanks! You don't have to buy one just because of the pictures but I do try to put across how stuff looks in reality in my pictures because I've never been a fan of stock photos as it looks different in person.
Mujja said:
I tried the case mate tough first but the cutouts around the usb port and s-pen were too sharp and made the phone uncomfortable to hold.
Have the Samsung case on my wife's Note II and and liked it, have one myself now
Click to expand...
Click to collapse
Yeah that's the problem with some cases where they have sharp/non curved bits around the bottom so when you use the phone it's a bit uncomfortable. Normally it's not noticeable until you use another case that doesn't have it and it's a nice welcome difference.

This case can be used along with the replacement backdoor flip cover (OEM Samsung with nfc). I also use the backdoor flip cover with my Otterbox commuter case without a problem and without modification. It's awesome in both applications because you get full phone protection, and in the instance I'm using the case discussed in this thread, without adding a lot of bulk to the phone.
Sent from my SCH-I605 using Tapatalk 2

harajyuks said:
This case can be used along with the replacement backdoor flip cover (OEM Samsung with nfc). I also use the backdoor flip cover with my Otterbox commuter case without a problem and without modification. It's awesome in both applications because you get full phone protection, and in the instance I'm using the case discussed in this thread, without adding a lot of bulk to the phone.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the info!
Could you post few photos of the combo in closed and open states please?
Just to make sure it is convenient for my use patterns before buying it...

If you want to use the official Samsung case with the flip cover, many people (myself included) just cut the softer outer plastic bit where it impedes the flip cover. Thanks to the back being a harder plastic it doesn't lose too much integrity and still holds onto the phone fine. There was a thread about it here in this section with photos and stuff, I'm sure you'll find it with a bit of searching.
The benefit of actually cutting the case rather than leaving it intact is you can still fold the cover back and type with two hands, whereas I'd you didn't the case would only open to about 90° from the screen
Sent from my GT-N7100 using xda premium

DaniLoveSky said:
Thank you for the info!
Could you post few photos of the combo in closed and open states please?
Just to make sure it is convenient for my use patterns before buying it...
Click to expand...
Click to collapse
D3_ said:
If you want to use the official Samsung case with the flip cover, many people (myself included) just cut the softer outer plastic bit where it impedes the flip cover. Thanks to the back being a harder plastic it doesn't lose too much integrity and still holds onto the phone fine. There was a thread about it here in this section with photos and stuff, I'm sure you'll find it with a bit of searching.
The benefit of actually cutting the case rather than leaving it intact is you can still fold the cover back and type with two hands, whereas I'd you didn't the case would only open to about 90° from the screen
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Here you go
The phone with the flip cover back door installed
A few pictures with the car in question in this post
Some more with the flip cover back door in combination with the Otterbox commuter
The case would fit better with modification but I chose to not modify and it works fine. Definitely requires 2 handed use until your used to welding it in these configurations.
Sent from my SCH-I605 using Tapatalk 2

And here I've made the glossy back matte
Sent from a Toaster using XDA App

robbiekhan said:
And here I've made the glossy back matte
Sent from a Toaster using XDA App
Click to expand...
Click to collapse
And why would you do that, Back to the review I brought this case off amazon uk and yes its a good case does not add to much bulk ti the phone either. No point wasting money on cheap tpu cases anymore as the official is only £10.
Sent from my GT-N7100 using xda premium

To see what it's like with a matte finish as matte looks more professional than glossy. And why not for the sale of posting feedback?

Nice post!
Could you post a picture of the inside of the case, specifically the part where the lanyard loop goes? Is it recessed, and is it strong?
Amazing pictures, makes me want to get it more, and it's one of the few cases with a lanyard loop :good:

Damn sorry I don't have it any more

CaseMate Tough

My CaseMate Tough case arrived today, and it's awesome. It's made up from two cases, an inner rubber case and an outer hard shell. The fit is perfect, it has decent grip, and the power/volume buttons are really responsive.
It's not the cheapest case (I paid £18), but it's one of the few decent ones I could find that had top and bottom protection.
Some pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

benjo said:
My CaseMate Tough case arrived today, and it's awesome. It's made up from two cases, an inner rubber case and an outer hard shell. The fit is perfect, it has decent grip, and the power/volume buttons are really responsive.
It's not the cheapest case (I paid £18), but it's one of the few decent ones I could find that had top and bottom protection.
Click to expand...
Click to collapse
Does the remote controll work with that case?

charly-whiskey said:
Does the remote controll work with that case?
Click to expand...
Click to collapse
I doubt it, the whole top is covered by the case. I've never had a use for the IR blaster though so I don't really mind

Wow that looks gorgeous. Guess I'll add another case to my list. I love collecting cases lol
Sent from my HTC6525LVW using Tapatalk

Does it feel solid as one piece, or can you tell the case is made from two pieces?

It feels completely solid, the second case is a tight fit onto the first

charly-whiskey said:
Does the remote controll work with that case?
Click to expand...
Click to collapse
I am hoping that the clear power button makes the remote usable. Had to order one of these after seeing the pics. Will be here tomorrow. I'll let you know after it's delivered. Thanks OP for the pics.

Just received it
I just received this case and can confirm that the IR blaster does work with this case. The power button is clear for that purpose. I have a couple UAGs, Commuters, and a Symmetry and I can already tell I prefer this case over those. The others are nice, but I like the back of this case. It isn't smooth so the phone doesn't feel like it's going to jump out of my hand when using it one handed like it does when I use the Otterboxes. It also won't slide around as easy if put down on something on it's back. This case also has the best feeling and most responsive volume and power buttons, as well.

DRLyman said:
I just received this case and can confirm that the IR blaster does work with this case. The power button is clear for that purpose. I have a couple UAGs, Commuters, and a Symmetry and I can already tell I prefer this case over those. The others are nice, but I like the back of this case. It isn't smooth so the phone doesn't feel like it's going to jump out of my hand when using it one handed like it does when I use the Otterboxes. It also won't slide around as easy if put down on something on it's back. This case also has the best feeling and most responsive volume and power buttons, as well.
Click to expand...
Click to collapse
Oh nice one, didn't think it would work. I've got nothing to test the IR blaster with so wasn't sure

charly-whiskey said:
Does the remote controll work with that case?
Click to expand...
Click to collapse
Yes. Remote works fine
Sent from my HTC One_M8 using Tapatalk
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
benjo said:
I doubt it, the whole top is covered by the case. I've never had a use for the IR blaster though so I don't really mind
Click to expand...
Click to collapse
Although covered, it works.
Just a gorgeous design by case mate
Sent from my HTC One_M8 using Tapatalk

Got the clear coming this week
Sent from my HTC One_M8 using Tapatalk

Chris_c81 said:
Got the clear coming this week
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Got my clear today, and IR works even better than before. Seems to me that the IR-signal is spread wider by the transparent plastic, very nice.
btw, just figured out that it is not only a blaster, but can read / learn from my remotes. So I programmed my HD-recorder and it works like a charme. Love it even more now!

charly-whiskey said:
Got my clear today, and IR works even better than before. Seems to me that the IR-signal is spread wider by the transparent plastic, very nice.
btw, just figured out that it is not only a blaster, but can read / learn from my remotes. So I programmed my HD-recorder and it works like a charme. Love it even more now!
Click to expand...
Click to collapse
I am thinking about ordering the clear also. I love the metal finish of the phone and like to look at the desing but my gunmetal lacks grip...I think the case that comes with the phone is perfect but it´s not clear so it wont do. Some questions, if I may:
Does it add much bulk compared to the case that comes with the phone? Do you believe it will scratch easily and will get yellowish with time?
Cheers

Badelhas said:
I am thinking about ordering the clear also. I love the metal finish of the phone and like to look at the desing but my gunmetal lacks grip...I think the case that comes with the phone is perfect but it´s not clear so it wont do. Some questions, if I may:
Does it add much bulk compared to the case that comes with the phone? Do you believe it will scratch easily and will get yellowish with time?
Cheers
Click to expand...
Click to collapse
Actually, it is a hard plastic back cover, the edge is a silicon frame. I think it will scratch with the time, but I don't really care.
Some issues:
a) Somehow my dogs hair find its way under the back cover (through the camera cutout I guess), and since it is cristal clear, every day I see some hair underneath my cover.
b) The buttons are more sensitive than before, so it switches on by accident, or the volume is triggered in my pocket.
No bulk added in my oppinion, the size feels the same as the one that came with the phone.
I am sure there are covers of the same quality for less money around. You should give them a try.

charly-whiskey said:
Actually, it is a hard plastic back cover, the edge is a silicon frame. I think it will scratch with the time, but I don't really care.
Some issues:
a) Somehow my dogs hair find its way under the back cover (through the camera cutout I guess), and since it is cristal clear, every day I see some hair underneath my cover.
b) The buttons are more sensitive than before, so it switches on by accident, or the volume is triggered in my pocket.
No bulk added in my oppinion, the size feels the same as the one that came with the phone.
I am sure there are covers of the same quality for less money around. You should give them a try.
Click to expand...
Click to collapse
Thanks, that's what I thought so I ordered 3 different type of clear cases, I´m waiting for them to arrive:
Baseus Soft TPU Ultrathin Transparent Case Cover Shield
http://pages.ebay.com/link/?nav=item...013422&alt=web
Clear Hybrid PC Cover With Black TPU Frame
http://pages.ebay.com/link/?nav=item...998769&alt=web
NEW ULTRA THIN CRYSTAL CLEAR HARD CASE
http://pages.ebay.com/link/?nav=item...441622&alt=web
I hope I like at least one of them but if I don't they were cheap so no problem.
Cheers

I just received the casemate tough case and it is immediately being returned. The buttons are unusable. I can't even use the power button and the volume buttons stick. Horrible case.

What do you mean by being unusable? That's interesting, I've never read other owners complain about that... What about being bulky or slippery?

The size is great, so is the material. For some reason the little clear insert for the power button won't let be use the power button (if that makes sense) and the volume buttons stick. I put it on and removed it a few times to make sure it was on good but no luck. I was really looking forward to this case too.

I got mine today also. Great looking case and sound materials. I have to agree though, it makes the buttons much tougher to use. I'm hoping over time they loosen up a bit. I can understand why you would want to return it though.
Sent from my HTC One_M8 using Tapatalk

metalfan78 said:
The size is great, so is the material. For some reason the little clear insert for the power button won't let be use the power button (if that makes sense) and the volume buttons stick. I put it on and removed it a few times to make sure it was on good but no luck. I was really looking forward to this case too.
Click to expand...
Click to collapse
Chris_c81 said:
I got mine today also. Great looking case and sound materials. I have to agree though, it makes the buttons much tougher to use. I'm hoping over time they loosen up a bit. I can understand why you would want to return it though.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Really strange, mine are perfect. They aren't sticky at all, and make a solid click when using them.
I guess you both got faulty ones