Database Develop

[Q] problem after rom install

hi everybody
i have samsung galaxy s.
yesterday i tried to install new rom. i have entered to recovery mode and did:
1) Wipe Data/factory reset
2)Wipe Cache
3)Wipe Dalvik-cache
4)mouts and storage and then format/system
5)Install Zip from SD card
when i did , the device could not recgonize the sd card and write me an erorr message.
people in other forums told me to install stock rom.
i did it.
i have download odin and tried to burn the stock rom. everything was ok.
the burn completed.
when i plugged out the phone from the usb port, the phone turned on and shows me at&t logo Flickering.
i cant enter recovery mode or download mode. only the logo Flickering.
someone please can help me?
i am helpless?
thank u all

crmadrid said:
hi everybody
i have samsung galaxy s.
yesterday i tried to install new rom. i have entered to recovery mode and did:
1) Wipe Data/factory reset
2)Wipe Cache
3)Wipe Dalvik-cache
4)mouts and storage and then format/system
5)Install Zip from SD card
when i did , the device could not recgonize the sd card and write me an erorr message.
people in other forums told me to install stock rom.
i did it.
i have download odin and tried to burn the stock rom. everything was ok.
the burn completed.
when i plugged out the phone from the usb port, the phone turned on and shows me at&t logo Flickering.
i cant enter recovery mode or download mode. only the logo Flickering.
someone please can help me?
i am helpless?
thank u all
Click to expand...
Click to collapse
i think ur phone is bricked...
so i recommend u use USB jig to get back into download mode...U can check the video below
http://www.youtube.com/watch?v=1RoZU...e_gdata_player
hope it works...
tell me ur status after this..
If my post helped, don't mind hitting THANKS

and if the JIG wont help send me a message and I will tell you how to get into download mode

hassanalip21 said:
and if the JIG wont help send me a message and I will tell you how to get into download mode
Click to expand...
Click to collapse
Is there any other way too?
If my post helped, don't mind hitting THANKS

[Q] My S3 Mini is stuck on the first screen and won't boot!

Hello,
Today my phone was functioning normally until I decided to launch a game (Jewels Star or something like that) that I always play normally.
But today when I entered it the phone froze and shut down by itself and now everytime I try to turn it on it gets stuck on the first screen that appears! (Samsung Galaxy S III mini GT-I8190)
My phone is not rooted and no Rom is flashed. I haven't done anything to it.
What can I do to fix the problem?! Please help!!

AytchG said:
Hello,
Today my phone was functioning normally until I decided to launch a game (Jewels Star or something like that) that I always play normally.
But today when I entered it the phone froze and shut down by itself and now everytime I try to turn it on it gets stuck on the first screen that appears! (Samsung Galaxy S III mini GT-I8190)
My phone is not rooted and no Rom is flashed. I haven't done anything to it.
What can I do to fix the problem?! Please help!!
Click to expand...
Click to collapse
remove battery for some minutes then try, if not
boot into recovery and wipe cache, if not, wipe data, if not
flash your stock firmware

How to wipe cache in recovery mode? I can only go to download mode by holding the home and the volume down buttons.
and how to flash the stock's firmware?

AytchG said:
How to wipe cache in recovery mode? I can only go to download mode by holding the home and the volume down buttons.
and how to flash the stock's firmware?
Click to expand...
Click to collapse
hold volume up + home + power.
if it didnt work, flash attached .tar file (unzip before) as pda in odin. (it will wipe your data)
for flashing stock, see my signature

Is there any other way better than wiping data? xD

AytchG said:
Is there any other way better than wiping data? xD
Click to expand...
Click to collapse
hmmm, i guess it will wipe only cache see here http://forum.xda-developers.com/showthread.php?p=45634960#post45634960
EDIT: as the original thread, it wipe your data

Fixed!! Thank you very very much!!!

AytchG said:
Fixed!! Thank you very very much!!!
Click to expand...
Click to collapse
So..did it wipe only cache, or did your data got lost as well?

Only cache The data hasn't been touched

AytchG said:
Only cache The data hasn't been touched
Click to expand...
Click to collapse
Good, as I thought, since it's just a empty cache.img inside the tar

(GT-I8190) Displays Wrong Phone Model When phone is starts
hello guys i encountered some problem too with my screen, but mine is not the same i may have loaded incorrect tar files via odin and encountered this problem, my firmware is official and also my binary is official,ive recovered the original firmware and recovery mode through (sammobiles.com) i really dont get why it displayed incorrect phone model on screen, i cant trace anymore what i did wrong but hopefully you guys can help me, i would be very grateful for your help , im very frustrated right now on what should i do to restore everything back please help:crying:
---------- Post added at 11:58 AM ---------- Previous post was at 11:50 AM ----------
hello guys my device is (GT-I8190- S3 mini) i encountered some problem too with my screen, but mine is not the same i may have loaded incorrect tar files via odin and encountered this problem, my firmware is official and also my binary is official,ive recovered the original firmware and recovery mode through (sammobiles.com) i really dont get why it displayed incorrect phone model on screen instead of (GT-I8190 S3mini) it Dispplays (GT-I9100) which is the Galaxy S2 displays on screen when i start my phone, so confused right now, i cant trace anymore what i did wrong but hopefully you guys can help me, i would be very grateful for your help , im very frustrated right now on what should i do to restore everything back please help:crying:

& I encountered some problem reading your orange text

[QOUTE=Aytch;45707180]Hi
AytchG said:
Hello,
Today my phone was functioning normally until I decided to launch a game (Jewels Star or something like that) that I always play normally.
But today when I entered it the phone froze and shut down by itself and now everytime I try to turn it on it gets stuck on the first screen that appears! (Samsung Galaxy S III mini GT-I8190)
My phone is not rooted and no Rom is flashed. I haven't done anything to it.
What can I do to fix the problem?! Please help!!
Click to expand...
Click to collapse
it would have been easier if you had rooted your phone. in that way you can hard reset the phone by pressing the VOLUME DOWN + POWER for 15sec, after which you press the HOME KEY and then follow the pop up to continue.

samersh72 said:
hold volume up + home + power.
if it didnt work, flash attached .tar file (unzip before) as pda in odin. (it will wipe your data)
for flashing stock, see my signature
Click to expand...
Click to collapse
will this work for g730a variant

Recovery
AytchG said:
How to wipe cache in recovery mode? I can only go to download mode by holding the home and the volume down buttons.
and how to flash the stock's firmware?
Click to expand...
Click to collapse
The s3 mini cant be put into recovery mode using buttons so you have to download the android sdk from google, right click adb folder, open in command prompt and type in reboot recovery.

I have little bit higher problem!
I was flashing custom rom and i t was flashed when i tried to start phone it was just looking like dead phone no reactions anything please help

Is there a way to wipe the data through Odin. If I try through recovery mode then the phone crashes and restarts immediately. In fact if I try to do any of the operations that touch Data then it crashes and restarts the phone. Thanks

my Samsung galaxy s 111 mini gt-18190 stuck on Samsung logo what should i do

[Q] cm 11 stuck in boot loop s3 mini

hi there,
i just tryed to put cm11 on my s3 mini it was going good till it came to load, now all i got is the cm logo on my screen, i think its stuck in a boot loop, it wont let me do anything apart for reset the phone, cant get in in to recovery,
WHAT CAN I DO ???????????????
thanks rhys

hey,
Well, the first time take some time to load you have to be patient

Ibrahim_F said:
hey,
Well, the first time take some time to load you have to be patient
Click to expand...
Click to collapse
how long do you think ? just i left it for 30 mins before and now i been on 2 hours trying every think lol

have you wipe data and cache?

You should do a full wipe from recovery, not just data and cache.

TDK91 said:
You should do a full wipe from recovery, not just data and cache.
Click to expand...
Click to collapse
it wont let me in to the recovery or i would of do that i have put it in the download mode to see if that will work

rhys254 said:
it wont let me in to the recovery or i would of do that i have put it in the download mode to see if that will work
Click to expand...
Click to collapse
If cannot go into recovery connect your phone with usb on your pc and use Adb commands to boot into recovery. In any case you can use Odin to flash again your phone with the stock.
hope this help..

pman4pman said:
If cannot go into recovery connect your phone with usb on your pc and use Adb commands to boot into recovery. In any case you can use Odin to flash again your phone with the stock.
hope this help..
Click to expand...
Click to collapse
ye i used Odin to put a stock rom on then i used it again to put cm11 now its working
thanks for all your help :laugh:
rhys

[Q] Phone cease charging the installer + does not work RAMDUMP Recovery

Hello,
I have with this phone really big problem. Namely, I had preloaded on it CyanogenMod in version 10.1. Unfortunately, the phone broke (guts inside) and did not react to anything, nothing will even launch the DownloadMode, so I said I'd send him to the site Samsung'a, I know that it automatically breaks the warranty, but I found it difficult, can make a ball . I was right, even though I got papers to break the warranty, however, they fixed it in 50% because now it turns on Download mode, and before anything, no reaction, no vibration, and charging the phone until jumping out logos "Samsung Galaxy Mini 2 GT-S6500D. " Unfortunately, this is over.
I tried to upload the ROM to the phone on the version of the GT-S6500D (because the bought) and here surprise, jumped an error that the model number is not right, I checked and the very surprising fact is that everywhere in the papers, and under the battery, I have written a model "GT-S6500D", while the entrance to the Download Mode in the "PRODUCT" I have written "GT-S6500" (without the letters D). Well, but as good as he wanted it done, I uploaded ROM for GT-S6500 and the kind of work, because there hangs on the log Samsung just goes on. But freezes a moment later, some error recovery , where it opens the installer Android'a and suddenly error:
Failed to mount / cache (no such file or directory)
Can not mount / cache / recovery / command
Failed to mount / system (no such file or directory)
No strange, yet this is not met, but good, I wanted to do so as they write, "go to recovery and make wipy", ok, I'm trying, VOL + HOME + POWER i .. Enables the message "RAMDUMP ARM9." Hmm .. I think wgram ClockWorkMod'a can help. I have uploaded ... I run ... RAMDUMP ... I'm trying to package a "live recovery" (or something like that - is to install the recovery on the phone and immediately turn it on), installed ... I'm waiting ... been activated .. . phew ... I'm trying to upload CyanogenMod 'on the SD card error:
Failed to mount / sdcard
... It is difficult, upload again the standard ROM Recovery on it still does not start, instead RAMDUMP, the installer stops ... And now I'm here, that's the end of my story.
I was looking for, I found a lot, but not enough. Happened same RAMDUMP, recommending Superuser.apk (I can not upload does not start the system), occurred Failed Load recommend Wipy ( Recovery will not start) ... And when we tried all these tips ... Nothing worked ... Time the following questions:
1.At the beginning, I would like to know (out of curiosity) how is it possible that before the service had S6500D and now I have S6500.
2.How to fix that instead RAMDUMP'a will load the Recovery .
3.What is the use of RAMDUMP'a because Odin in this mode is not phone me:?
4.How to fix this phone to work again, or at least a "sufficient walked"?
5.What could be causing this strange behavior?
My guess is that the answer will not be too simple, but I would be very grateful if somebody advised something, because I after two days of ideas is over :/
Thank you in advance, sorry for my bad English and best regards!

Now I am trying to solve your problems.
Reserved for solutions.
1.At the beginning, I would like to know (out of curiosity) how is it possible that before the service had S6500D and now I have S6500.
2.How to fix that instead RAMDUMP'a will load the Recovery .
3.What is the use of RAMDUMP'a because Odin in this mode is not phone me:?
4.How to fix this phone to work again, or at least a "sufficient walked"?
5.What could be causing this strange behavior?
Click to expand...
Click to collapse
I will try to solve it step by step.
1. To tell you more about this, please tell me if you see an nfc app on the launcher's app drawer. ( I mean, after service, with the s6500 rom)
Click to expand...
Click to collapse
2. To fix it see my solution there http://forum.xda-developers.com/showthread.php?t=2707219
Click to expand...
Click to collapse
3. After your device crashes, RAMDUMP creates ramdump*.log files in the root storage. This is useful for developers.
Click to expand...
Click to collapse
4. To restore your phone to original baseband, you need to acces recovery an wipe data,system,cache,dalvik cache. Then flash an S6500d rom with odin from www.samfirmware.com
Click to expand...
Click to collapse

When I tried to wipe data,cache,system,dalvik I got error: "Failed to mount (/data,/system/,etc.)"...

blahax2g said:
When I tried to wipe data,cache,system,dalvik I got error: "Failed to mount (/data,/system/,etc.)"...
Click to expand...
Click to collapse
I am glad that you can now acces recovery. But now you need to try to reflash it, and see what happens, I mean, if you can mount something.

My friend have this kind of issue but he just flash it

[Q] Samsung Galaxy S advance GT-I9070

Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.

Giri512 said:
Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.
Click to expand...
Click to collapse
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english

reply
kilroy69 said:
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english
Click to expand...
Click to collapse
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.

Giri512 said:
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.
Click to expand...
Click to collapse
If no download mode, then i think that: Usb Jig
singhdharmendra48 said:
bcoz i have a jig and work only download mode not reset binary count
Click to expand...
Click to collapse
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.

Thanks
kilroy69 said:
If no download mode, then i think that: Usb Jig
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.
Click to expand...
Click to collapse
Thanks..better to go to service centre..