Related
I believe I overwiped my phone, it has no rom on it now, and when I plug it into the computer, it makes the noise, but will not show up in windows explorer. I am able to boot into recovery, TRWN, although I can't do anything from there because I have no rom to install. I have tried installing the latest HTC drivers, using a different cord, disabling antivirus, pretty much everything previously listed in these forums. Is there a way to use the command prompt to send a rom over to the phone? Please help.
cburch85 said:
I believe I overwiped my phone, it has no rom on it now, and when I plug it into the computer, it makes the noise, but will not show up in windows explorer. I am able to boot into recovery, TRWN, although I can't do anything from there because I have no rom to install. I have tried installing the latest HTC drivers, using a different cord, disabling antivirus, pretty much everything previously listed in these forums. Is there a way to use the command prompt to send a rom over to the phone? Please help.
Click to expand...
Click to collapse
donwload the all in one toolkit use it to erase cache then install recovery. after that either mount usb otg and copy rom to sd or sideload a rom. all in one toolkit automates everything you need to do:good::good:
I wish I could say that worked, however when I try to use the AIO toolkit, when it launces the command prompt it says 'device not found.' same problem as windows. There has to be a way to force a file on there. Any ideas? Again, I can boot to recovery but have no zip on the phone memory to flash.
cburch85 said:
I wish I could say that worked, however when I try to use the AIO toolkit, when it launces the command prompt it says 'device not found.' same problem as windows. There has to be a way to force a file on there. Any ideas? Again, I can boot to recovery but have no zip on the phone memory to flash.
Click to expand...
Click to collapse
if it says device not found press the power button once and try again. it will say once in fastboot close the first window if you close the first window and nothing happens then press power and it should start
if your in fastboot options should be----bootloader----reboot----reboot bootloader----power down
skinsfanbdh said:
if it says device not found press the power button once and try again. it will say once in fastboot close the first window if you close the first window and nothing happens then press power and it should start
if your in fastboot options should be----bootloader----reboot----reboot bootloader----power down
Click to expand...
Click to collapse
Thanks for getting me this far. Mounting didn't work, so I sideloaded rom. it is showing up on the phone as "sideload.zip" i try to run and it fails. Any ideas?
Have you used this command?
Code:
adb sideload /path/to/rom.zip
If yes, it will work.
Maybe sideload.zip contains rom and if sideload.zip don't have meta-inf it will not flashed
Guich said:
Have you used this command?
Code:
adb sideload /path/to/rom.zip
If yes, it will work.
Maybe sideload.zip contains rom and if sideload.zip don't have meta-inf it will not flashed
Click to expand...
Click to collapse
I get it sideloaded and installed android revolution. however, when I'm done installing the rom, trwn tells me "superuser is not installed, would you like to install now?" I say yes and then the phone goes blank, and reboots to bootloader. Any ideas?
cburch85 said:
I get it sideloaded and installed android revolution. however, when I'm done installing the rom, trwn tells me "superuser is not installed, would you like to install now?" I say yes and then the phone goes blank, and reboots to bootloader. Any ideas?
Click to expand...
Click to collapse
im guessing your using twrp but just select no dont root the rom is already rooted and it should boot. may take getting through a few aroma freezes but it will boot
cburch85 said:
I get it sideloaded and installed android revolution. however, when I'm done installing the rom, trwn tells me "superuser is not installed, would you like to install now?" I say yes and then the phone goes blank, and reboots to bootloader. Any ideas?
Click to expand...
Click to collapse
Change the rom or don't say yes when you have the question
Sent from ONE with Tapa4 Beta
Guich said:
Change the rom or don't say yes when you have the question
Sent from ONE with Tapa4 Beta
Click to expand...
Click to collapse
OK, so I didn't say yes to the question this time after sideloading android revolution. same thing. goes blank then reboots to bootloader menu. So I tried sideloading viperrom 1.04. This time after it finished sideloading it randomly installed instelfl, and now viperrom is installed, its booting up to the phone now finally, yet before anything can initialize, it just reboots again. It's been caught in this boot loop about ten minutes now. No end in sight. Any ideas?
ViperRom from Sprint or AT&T one forum?
Your phone is branded or no-brand?
However, boot into recovery, and use this command:
Code:
adb push name_of_rom.zip /sdcard
, then flash it
Also, I have now tried flashing and installing TrickDroid which also boots to the O/S but then after a few seconds reboots and starts all over again. I just let it run, and it boots, then reboots, over, and over, and over again. Any ideas?
cburch85 said:
Also, I have now tried flashing and installing TrickDroid which also boots to the O/S but then after a few seconds reboots and starts all over again. I just let it run, and it boots, then reboots, over, and over, and over again. Any ideas?
Click to expand...
Click to collapse
Have you tried to flash the boot.img from fastboot?
I fixed it!!! I had to download the latest RUU for the HTC One. I ran the RUU after relocking, and then started the root process from scratch. RUU is the only thing that would work. Also, the best rom I have gotten to work for sprint is ViperRom, TrickDroid installed and booted but the camera wouldnt work. Thanks for the help and suggestions!
cburch85 said:
I fixed it!!! I had to download the latest RUU for the HTC One. I ran the RUU after relocking, and then started the root process from scratch. RUU is the only thing that would work. Also, the best rom I have gotten to work for sprint is ViperRom, TrickDroid installed and booted but the camera wouldnt work. Thanks for the help and suggestions!
Click to expand...
Click to collapse
Where did you find the RUU for sprint? I cant seem to find one that works with my CID: SPCS_001.
Hey, im having the same problem. I have nothing on my phone, not even root. I cant use adb commands but fastboot seems to work. Im using TWRP 2.6.3 recovery. If anyone can help that would be awesome!!
zach832 said:
Hey, im having the same problem. I have nothing on my phone, not even root. I cant use adb commands but fastboot seems to work. Im using TWRP 2.6.3 recovery. If anyone can help that would be awesome!!
Click to expand...
Click to collapse
Reflash the latest TWRP and check if adb work.
Becuase without it you can't push/sideload a rom...
Can't detect SD Card
Guich said:
Reflash the latest TWRP and check if adb work.
Becuase without it you can't push/sideload a rom...
Click to expand...
Click to collapse
Hi, I'm having sort of the same problem. My phone is stuck on a bootloop, I flashed a new recovery because the previous TWRP stopped working. When I try to wipe data/factory reset, It says that it can't detect E:\ or the SD Card. I can't even mount it. Any ideas? Please help. Thanks
hey guys i need help
how can i add any file to phone when i in recovery ? help me pls :/
alibalter said:
hey guys i need help
how can i add any file to phone when i in recovery ? help me pls :/
Click to expand...
Click to collapse
Search 'adb push'.
Sent from my HTC One using XDA Premium 4 mobile app
redbull123 said:
Search 'adb push'.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
is there another way ? :/ i couldnt succes this
alibalter said:
is there another way ? :/ i couldnt succes this
Click to expand...
Click to collapse
Dude, that's how you do it, or else flash flashable files thru recovery. I suggest you figure out why ADB is not working - correct drivers installed, correct SDK files, change usb cables, try another USB port
dgtiii said:
Dude, that's how you do it, or else flash flashable files thru recovery. I suggest you figure out why ADB is not working - correct drivers installed, correct SDK files, change usb cables, try another USB port
Click to expand...
Click to collapse
dude i installed correct of everything. i tried it on adb on recovery it says me at command prompt protocol failure
You can also use a USB-OTG cable and flash drive in recovery.
Sent from my HTC One using XDA Premium 4 mobile app
alibalter said:
dude i installed correct of everything. i tried it on adb on recovery it says me at command prompt protocol failure
Click to expand...
Click to collapse
I'm just saying, your issue is getting ADB to work, not how to add files to phone while in recovery. Search the forums on ADB issues, it's tricky getting it to work on Windows 8 especially, but there are guides in these forums. You either push apk's to your phone thru ADB, flash them thru recovery, or download them from the Play Store/net. There is no magical way my friend, so my advice is to research and figure out why ADB isn't working, and your problem will be solved.
dgtiii said:
I'm just saying, your issue is getting ADB to work, not how to add files to phone while in recovery. Search the forums on ADB issues, it's tricky getting it to work on Windows 8 especially, but there are guides in these forums. You either push apk's to your phone thru ADB, flash them thru recovery, or download them from the Play Store/net. There is no magical way my friend, so my advice is to research and figure out why ADB isn't working, and your problem will be solved.
Click to expand...
Click to collapse
i got it adb push is ok. its worked. i pushed it to device. look dude i formatted sd card , data cache everything of phone on the recovery. now i'm trying to get system back. Now i pushed ViperOne.zip to device but when i click to choose zip from sd card section and select viperone.zip it says me thats :
finding update package
opening update package
e:cant open /sdcard/...zip
(bad)
installation aborted.
Now what must i do ****. :/
redbull123 said:
You can also use a USB-OTG cable and flash drive in recovery.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i got it adb push is ok. its worked. i pushed it to device. look dude i formatted sd card , data cache everything of phone on the recovery. now i'm trying to get system back. Now i pushed ViperOne.zip to device but when i click to choose zip from sd card section and select viperone.zip it says me thats :
finding update package
opening update package
e:cant open /sdcard/...zip
(bad)
installation aborted.
Now what must i do ****. :/
alibalter said:
i got it adb push is ok. its worked. i pushed it to device. look dude i formatted sd card , data cache everything of phone on the recovery. now i'm trying to get system back. Now i pushed ViperOne.zip to device but when i click to choose zip from sd card section and select viperone.zip it says me thats :
finding update package
opening update package
e:cant open /sdcard/...zip
(bad)
installation aborted.
Now what must i do ****. :/
Click to expand...
Click to collapse
Don't get testy, I'm trying to help lol! Ok, glad you got ADB up and running, that's a good thing! You never really mentioned what state your phone is in, or how it got that way?
Since its a rom, have you thought about or tried ADB sideloading? Just thinking about possibilities
Which ViperOne file are you trying to install? Version 2.1 full rom I assume?
dgtiii said:
Don't get tasty, I'm trying to help lol! Ok, glad you got ADB up and running, that's a good thing! You never really mentioned what state your phone is in, or how it got that way?
Since its a rom, have you thought about or tried ADB sideloading? Just thinking about possibilities
Click to expand...
Click to collapse
i didnt try adb sideload how can i do it
alibalter said:
i didnt try adb sideload how can i do it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload
Read this my friend
dgtiii said:
http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload
Read this my friend
Click to expand...
Click to collapse
dude this isnt about adb sideload this is about adb push ... :/
alibalter said:
dude this isnt about adb sideload this is about adb push ... :/
Click to expand...
Click to collapse
Lol, I am not sure what its about, because you never describe what state your phone is in, or how it got that way. At first, I assumed you were just trying to push apk's to your phone, then I understood it was a rom, which made me think you must of wiped your sd card partition or something, for which ADB push would work.
Ok, so why did you push the rom to your sd card, what was the sequence of events? What viper file are you trying to run? It's on your sd card now, right?
And you're right, I linked the wrong thread, I apologize, here's sideload dude
http://forum.xda-developers.com/showthread.php?t=2318497
dgtiii said:
Lol, I am not sure what its about, because you never describe what state your phone is in, or how it got that way. At first, I assumed you were just trying to push apk's to your phone, then I understood it was a rom, which made me think you must of wiped your sd card partition or something, for which ADB push would work.
Ok, so why did you push the rom to your sd card, what was the sequence of events? What viper file are you trying to run? It's on your sd card now, right?
Click to expand...
Click to collapse
my friend i formatted everything. there is not anything in my sdcard and data and cache got it ? i am trying to push a rom to device and install it for work phone. there is not anything on phone got this ok ? do you understand my problem now ? my phone is tim branded. cid : TIM_401 like that i have a backup already but first i have to flash a rom
alibalter said:
my friend i formatted everything. there is not anything in my sdcard and data and cache got it ? i am trying to push a rom to device and install it for work phone. there is not anything on phone got this ok ? do you understand my problem now ? my phone is tim branded. cid : TIM_401 like that i have a backup already but first i have to flash a rom
Click to expand...
Click to collapse
Wow. Go back and read your OP, and forgive me if your situation wasn't completely clear to me. What 'I got' and what I 'understand now' is I just wasted an hour of my life trying to help you, and you're kind of a hostile prick. It's not my fault you are in the situation you're in. I'm done, good luck.....
dgtiii said:
Wow. Go back and read your OP, and forgive me if your situation wasn't completely clear to me. What 'I got' and what I 'understand now' is a just wasted an hour of my life trying to help you, and you're kind of a hostile prick. It's not my fault you are in the situation you're in. I'm done, good luck.....
Click to expand...
Click to collapse
dude i'm not a monster just help me :/
alibalter said:
dude i'm not a monster just help me :/
Click to expand...
Click to collapse
Lets see if I can help, in your recovery goto flash a zip then choose from sideload.
Then on your pc, type adb sideload name.zip
Then wait for it to sideload the Rom and it will flash automatically.
Also look at my Sig for my toolkit, it has the sildeloading option by clicking buttons..
Sent from my HTC One using Tapatalk 4
squabbi said:
Lets see if I can help, in your recovery goto flash a zip then choose from sideload.
Then on your pc, type adb sideload name.zip
Then wait for it to sideload the Rom and it will flash automatically.
Also look at my Sig for my toolkit, it has the sildeloading option by clicking buttons..
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
thank you my friend i got it and fixed everything thanks
alibalter said:
thank you my friend i got it and fixed everything thanks
Click to expand...
Click to collapse
I'm glad for you! take care!!
Sent from my HTC One using Tapatalk 4
Hello. I have the following problem. I friend of mine that I've sold him my old rooted Htc One tried to make 4.4. kitkat
He tried to install
Android_Revolution_HD-One-53.0zip
BUT I don't know how he managed to stuck his phone.The problem is when I am power on the phone it shows the white HTC screen with the red letters "this build is for development purpose only..." after a while reboots in TWRP v2.5.0.0
And that's it , I cannot do anything because my PC won't recognize it via USB cable.
Any suggestions?
(excuse me for my English, with love from Greece )
As long as it boots into Recovery its not bricked. Do you have the HTC Driver installed on your computer?
Android Revolution HD 53 requires min. TWRP 2.6.3.3. Your version is too old.
foxgre said:
Hello. I have the following problem. I friend of mine that I've sold him my old rooted Htc One tried to make 4.4. kitkat
He tried to install
Android_Revolution_HD-One-53.0zip
BUT I don't know how he managed to stuck his phone.The problem is when I am power on the phone it shows the white HTC screen with the red letters "this build is for development purpose only..." after a while reboots in TWRP v2.5.0.0
And that's it , I cannot do anything because my PC won't recognize it via USB cable.
Any suggestions?
(excuse me for my English, with love from Greece )
Click to expand...
Click to collapse
From recovery go to fastboot connect phone to pc.
It must be recognized.
Then flash boot.img which is in the Revolution.zip.
Then install the rom via recovery.
Remember for unlock and not s-off users the boot.img must be flashed befor flashing a rom.zip.
Sent by myself, without help )
i am doing as you say, but it's not recognized.
I only get a message android phone, not installed properly
SAME problem (or pretty similar) here
foxgre said:
i am doing as you say, but it's not recognized.
I only get a message android phone, not installed properly
Click to expand...
Click to collapse
SAME problem (or pretty similar) here, trying to instal ARHD61.1... I don't know how did I screw up this so much...
My bootloader is TAMPERED, UNLOCKED, S-On. Recovery TRWP (2.7) launches but... many things don't work.
First thing I have to mention is that I didn't forget to enable debugging before all this started (and now I can't launch android to do it).
My HTC drivers should be up-to-date, as I installed yesterday HTC sync 3.00.52...
In bootloader, if I type "fastboot devices" I get "FA34HW903605 fastboot", and "fastboot reboot.bootloader" does what it is expected to do...
In recovery, "adb push" tells me "error: device not found".
Can someone help me? If you need more details, just ask. Thanks
foxgre said:
i am doing as you say, but it's not recognized.
I only get a message android phone, not installed properly
Click to expand...
Click to collapse
Duwie_80 said:
SAME problem (or pretty similar) here, trying to instal ARHD61.1... I don't know how did I screw up this so much...
My bootloader is TAMPERED, UNLOCKED, S-On. Recovery TRWP (2.7) launches but... many things don't work.
First thing I have to mention is that I didn't forget to enable debugging before all this started (and now I can't launch android to do it).
My HTC drivers should be up-to-date, as I installed yesterday HTC sync 3.00.52...
In bootloader, if I type "fastboot devices" I get "FA34HW903605 fastboot", and "fastboot reboot.bootloader" does what it is expected to do...
In recovery, "adb push" tells me "error: device not found".
Can someone help me? If you need more details, just ask. Thanks
Click to expand...
Click to collapse
can you guys check out FAQ #2 in my guide: http://forum.xda-developers.com/showthread.php?t=2541082 if that's the problem you have
nkk71 said:
can you guys check out FAQ #2 in my guide: http://forum.xda-developers.com/showthread.php?t=2541082 if that's the problem you have
Click to expand...
Click to collapse
Let me try and I'll tell you later. I also think it's a matter of drivers, so I was downloading and re-installing it... Thank you for your help
-------------------------------------------------- UPDATE --------------------------------------------------------------------------------
Well, I followed your steps (LET ME THANK YOU FOR MAKING THAT GUIDE) and now the device is "My HTC" as you show.
Something has changed:
If I type "adb devices" (in PC) when phone is in fastboot, the listing is void (before I got "FA34HW903605 fastboot"), and if I do the same while phone is in recovery, I get the mentioned "FA34HW903605 recovery".
In Windows7 I don't see "My HTC" as a conventional USB storage or Memory of a Camera (should it be?)
I've managed to ADB PUSH a ROM (ARHD) in recovery, but now I get an error message: "Unable to mount '/data' " and "Unable to mount internal storage " then FAILED. Now I'll try flashing a new recovery...
WOW WOW WOW!! It was enough for me, sir
1st) Solve comunnication issues as shown in FAQ #2 here
2nd) Solve TWRP recovery mount issues by:
2.a) Installing any other (clockwork) in fastboot using One All In One Kit (eaaaasy)
2.b) Formatting cache, system, data partitions
2.c) Installing TWRP again using One All In One Kit (Android Revolution REQUIRES this recovery)
2.d) Sending the ROM ('adb push your_rom.zip /sdcard/wherever_you_want_it')
2.e) Installing it from TWRP recovery.
An that was all. THANKS A LOT nkk71; without your help I still would be here trying to figure out what's broken... Thanks.
Duwie_80 said:
WOW WOW WOW!! It was enough for me, sir
1st) Solve comunnication issues as shown in FAQ #2 here
2nd) Solve TWRP recovery mount issues by:
2.a) Installing any other (clockwork) in fastboot using One All In One Kit (eaaaasy)
2.b) Formatting cache, system, data partitions
2.c) Installing TWRP again using One All In One Kit (Android Revolution REQUIRES this recovery)
2.d) Sending the ROM ('adb push your_rom.zip /sdcard/wherever_you_want_it')
2.e) Installing it from TWRP recovery.
An that was all. THANKS A LOT nkk71; without your help I still would be here trying to figure out what's broken... Thanks.
Click to expand...
Click to collapse
no problem, glad to be of help
remember for most 4.4 ROMs, (for m7_u/ul) TWRP 2.6.3.3 (or higher) is recommended at the moment.
though you should be good by downloading it, then checking MD5 to make sure the download isnt corrupt (that site doesnt work with download managers), then:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
-> enter recovery and push the rom
Thank you all for your support, but still the problem remains.
I have installed HTC Drivers and when i connect the HtcOne i can hear the USB beep from windows but i cannot open the phone like a drive.
In other words i cannot add files to the phone :crying::crying:
foxgre said:
Thank you all for your support, but still the problem remains.
I have installed HTC Drivers and when i connect the HtcOne i can hear the USB beep from windows but i cannot open the phone like a drive.
In other words i cannot add files to the phone :crying::crying:
Click to expand...
Click to collapse
you're really not giving any details... so you hear a sound... what does Windows Device Manager show??
foxgre said:
Thank you all for your support, but still the problem remains.
I have installed HTC Drivers and when i connect the HtcOne i can hear the USB beep from windows but i cannot open the phone like a drive.
In other words i cannot add files to the phone :crying::crying:
Click to expand...
Click to collapse
It wont be so easy, I'm afraid. Even if comunication issues are solved, you won't be able to copy your ROM using windows file manager, opening the phone like a conventional drive...
You have to install "ADB" in your PC (search in HTC ONE subforums, there's a lot of info about ADB pusing (=copying) ROMS) and use it to copy your ROM. One advice: while "pushing" the ROM, be patient: it takes a long time. When your ROM is "pushed", just install it in recovery and... that's it!!
I think here you have a good starting point.
Duwie_80 said:
It wont be so easy, I'm afraid. Even if comunication issues are solved, you won't be able to copy your ROM using windows file manager, opening the phone like a conventional drive...
You have to install "ADB" in your PC (search in HTC ONE subforums, there's a lot of info about ADB pusing (=copying) ROMS) and use it to copy your ROM. One advice: while "pushing" the ROM, be patient: it takes a long time. When your ROM is "pushed", just install it in recovery and... that's it!!
I think here you have a good starting point.
Click to expand...
Click to collapse
Thanks again i am already looking for it.
AT LAST!!!
I've managed to push the rom.
Thank you very much for your help
foxgre said:
AT LAST!!!
I've managed to push the rom.
Thank you very much for your help
Click to expand...
Click to collapse
Hey, congratulations!! :good::good::good:
Hello
Currently my phone is useless, I am blaming myself but somewhat of the ROM I used before this all happened.
For starters, my bootloader is unlocked and s-on. I successfully installed TWRP and rooted using SuperSU. I wanted to try out the custom ROM ViperOne. It installed perfectly fine without any errors. But when I rebooted the phone I am greeted with the lockscreen with no service (x by the bars) and when I go to unlock the phone it goes to a white screen with the HTC logo in the center. It will continue to stay at this screen till it reboots again and does the same thing.
At this point I am frustrated and followed this guide http://forum.xda-developers.com/showthread.php?t=2503646 to revert back to Stock. I was able to do every step correctly besides the flashing of the radio and pushing the Stock_Rom on the phone.
I was able to install the stock rom by putting it on my internal storage and flashing it that way, but still no luck with the radio. But now the Stock_Rom is doing the exact same thing as the Viper, Whitescreen with HTC. Plus it is constantly saying "Unfortunately Phone has stopped" making it unusable.
If someone could please help me out or direct me to another tut to follow I will appreciate it very much. Because at this point I am to believe that I bricked my device and I am unaware if I am able for an upgrade anytime soon.
Thank you for you time.
A little update.
I am not starting to think this whole problem has to do with my radio, simply I do not have 1. How do I get this working again?
Another update.
I tried to follow this guide http://forum.xda-developers.com/showthread.php?t=2250904 (Very helpful btw :good
But still no luck, it froze me at the black screen with HTC and no loading bar.
I just want to be able to use my phone again :crying:
Everything you need is in the first link you posted.
BD619 said:
Everything you need is in the first link you posted.
Click to expand...
Click to collapse
Thank you for your response.
Like I sad, I tried that link already but with no luck. I could be doing something wrong, but I am following word for word.
kavinsky_ep said:
Thank you for your response.
Like I sad, I tried that link already but with no luck. I could be doing something wrong, but I am following word for word.
Click to expand...
Click to collapse
Latest radio can be found HERE
BD619 said:
Latest radio can be found HERE
Click to expand...
Click to collapse
I've downloaded 1.00.20.1108 and I am trying to flash it using fastboot flash zip radio.zip (I renamed it to type it in easier).
But every time I press enter it does signature checking... then it says FAILD (remote: 12 signature verify fail)
Any ideas?
kavinsky_ep said:
I've downloaded 1.00.20.1108 and I am trying to flash it using fastboot flash zip radio.zip (I renamed it to type it in easier).
But every time I press enter it does signature checking... then it says FAILD (remote: 12 signature verify fail)
Any ideas?
Click to expand...
Click to collapse
Flash in recovery like the instructions say lol
BD619 said:
Flash in recovery like the instructions say lol
Click to expand...
Click to collapse
Ok, thank you again. I will try this. I hope to god it works
Sigh. Another problem
After performing the wipe with TWRP and then i type in the cmd adb push nameofrom.zip /sdcard/ but I get the following error in cmd.
adb server is out of date. killing...
* daemon started successfully *
I am confused by this because my drivers are up to date, unless this is a different problem. Any ideas?
kavinsky_ep said:
Sigh. Another problem
After performing the wipe with TWRP and then i type in the cmd adb push nameofrom.zip /sdcard/ but I get the following error in cmd.
adb server is out of date. killing...
* daemon started successfully *
I am confused by this because my drivers are up to date, unless this is a different problem. Any ideas?
Click to expand...
Click to collapse
It's normal for it to say that.
Do you get your serial number returned when you type
adb devices
BD619 said:
It's normal for it to say that.
Do you get your serial number returned when you type
adb devices
Click to expand...
Click to collapse
Hey! I fixed it, I was able to quickly put the radio.zip into my internal storage before the phone could freak out. Went into TWRP and flashed that *****! IT WORKS!
No more custom ROMS for me, I'll just stick to rooting and keeping stock rom.
I would like to thank you for helping me throughout this, I really appreciate this. :good:
btw, if I were unable to do it the way I did, how would I fix it to work with the adb push command?
kavinsky_ep said:
Hey! I fixed it, I was able to quickly put the radio.zip into my internal storage before the phone could freak out. Went into TWRP and flashed that *****! IT WORKS!
No more custom ROMS for me, I'll just stick to rooting and keeping stock rom.
I would like to thank you for helping me throughout this, I really appreciate this. :good:
btw, if I were unable to do it the way I did, how would I fix it to work with the adb push command?
Click to expand...
Click to collapse
Depends what is causing the adb to be wonky most likely it's a driver issue.
Drivers install while booted to OS,Recovery,and fastboot.
BTW when you were doing the adb push romname.zip /sdcard/ were you in recovery or OS?
You are very welcome btw
BD619 said:
Depends what is causing the adb to be wonky most likely it's a driver issue.
Drivers install while booted to OS,Recovery,and fastboot.
BTW when you were doing the adb push romname.zip /sdcard/ were you in recovery or OS?
You are very welcome btw
Click to expand...
Click to collapse
I was in my recovery, TWRP. and using my computer with the CMD. Or by OS do you mean my phone OS. Because I was unable to use my Phone due to the radio not being there.
kavinsky_ep said:
I was in my recovery, TWRP. and using my computer with the CMD. Or by OS do you mean my phone OS. Because I was unable to use my Phone due to the radio not being there.
Click to expand...
Click to collapse
Most likely the drivers were not installed properly while booted to twrp...there are instructions in my guide that will show you how to install them properly.
I was wondering if the phone was booted to OS.
Get yourself S-OFF, and many flashing woes disappear. I have soft-bricked my phone with a Viper myself. You have to be sure you install the correct carrier version and think twice about installing kernels in ViperHub (or whatever they call it). If you install a GSM anything to your Sprint phone, your radio will go away. An RUU will fix this though. Windows 8 does not play well with ADB on our phones, either.
Sent from my One using Tapatalk
I'm having the SAME exact problems as you. Went to flash Viper rom and just get stuck on the white screen with the HTC logo. Glad I'm not the only one!
Hopefully I'll be able to fix mine as well!
Hi xda!
I recently got a HTC One from a friend, as my old phone was worn out. It turned out he had rooted it, tampered with it, the whole nine yards. I was not told he had rooted it, so I accepted a prompt asking me to update the phone to what I believe was 4.4.2, KitKat. I now realize that should not have been done. When the phone restarted it went to the HTC startup logo, into a kind of blue screen (not the BSOD), the Google logo flashed on the screen for 0.5 seconds, and then it got stuck on this weird blue/turqoise screen. Nothing happened.
I called my friend, he told me he rooted it etc., and that I should try a factory reset, and if that didn't work, complete reset (including the system folder wipe). That obviously didn't work, but I didn't know any better as I have never touched a rooted phone in my life, and I'm thus a complete noob when it comes to terminology, what steps to take and so on.
Now I have a phone with no OS, stuck at the HTC logo when I start it normally, and all I can do is boot up into bootloader. I can also access TWRP. I have installed HTC Sync on my laptop, but the phone is not detected properly (meaning, the "device connected" sound is played, and I can find "Android device" in device manager, but the HTC Sync can't find the phone) when connected through a USB. It is not the USB that came with the phone. I also installed Squabbi's HTC One toolkit, which basically is the one-click interface of pushing revone etc. to the phone. Problem is, "error, device not detected".
I've browsed around for a good six hours without any luck, other than that I've started to understand how this is all connected.
Phone is
*TAMPERED*
*UNLOCKED*
M7_UL
S-ON
HBOOT 1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
I pray to the mighty tech gods of xda to help me out. I looked for similar threads, couldn't find any that were simple and similar enough for me to understand. I must admit I'm very keen to learn this, so if someone know of any place where basic terminology is explained, I'd really appreciate that. Other than that, a step by step instruction on how to proceed from this cluster**** would also be highly appreciated (what I need installed on my laptop, where I can find ROM's, what flashing means etc.).
Thank you in advance!
PrimalMK said:
Hi xda!
I recently got a HTC One from a friend, as my old phone was worn out. It turned out he had rooted it, tampered with it, the whole nine yards. I was not told he had rooted it, so I accepted a prompt asking me to update the phone to what I believe was 4.4.2, KitKat. I now realize that should not have been done. When the phone restarted it went to the HTC startup logo, into a kind of blue screen (not the BSOD), the Google logo flashed on the screen for 0.5 seconds, and then it got stuck on this weird blue/turqoise screen. Nothing happened.
I called my friend, he told me he rooted it etc., and that I should try a factory reset, and if that didn't work, complete reset (including the system folder wipe). That obviously didn't work, but I didn't know any better as I have never touched a rooted phone in my life, and I'm thus a complete noob when it comes to terminology, what steps to take and so on.
Now I have a phone with no OS, stuck at the HTC logo when I start it normally, and all I can do is boot up into bootloader. I can also access TWRP. I have installed HTC Sync on my laptop, but the phone is not detected properly (meaning, the "device connected" sound is played, and I can find "Android device" in device manager, but the HTC Sync can't find the phone) when connected through a USB. It is not the USB that came with the phone. I also installed Squabbi's HTC One toolkit, which basically is the one-click interface of pushing revone etc. to the phone. Problem is, "error, device not detected".
I've browsed around for a good six hours without any luck, other than that I've started to understand how this is all connected.
Phone is
*TAMPERED*
*UNLOCKED*
M7_UL
S-ON
HBOOT 1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
I pray to the mighty tech gods of xda to help me out. I looked for similar threads, couldn't find any that were simple and similar enough for me to understand. I must admit I'm very keen to learn this, so if someone know of any place where basic terminology is explained, I'd really appreciate that. Other than that, a step by step instruction on how to proceed from this cluster**** would also be highly appreciated (what I need installed on my laptop, where I can find ROM's, what flashing means etc.).
Thank you in advance!
Click to expand...
Click to collapse
well a lot of the work seems to already be done
your unlocked / rooted which means you should have a custom recovery installed.
boot the phone by holding the power + volume down
this will bring up the bootloader. use the volume key to choose recovery aand hit the power button. when you boot into recovery come back and report the name and version of recovery. I.E. Teamwin recovery 2.5.0.0 or clockworkmod 6.0.3.1 ...I'll be here the next couple hrs
clsA said:
well a lot of the work seems to already be done
your unlocked / rooted which means you should have a custom recovery installed.
boot the phone by holding the power + volume down
this will bring up the bootloader. use the volume key to choose recovery aand hit the power button. when you boot into recovery come back and report the name and version of recovery. I.E. Teamwin recovery 2.5.0.0 or clockworkmod 6.0.3.1 ...I'll be here the next couple hrs
Click to expand...
Click to collapse
Version of TWRP is 2.5.0.0. Currently trying to re-install an OS. Need one that the current version of TWRP can flash to the phone, as flashing a new version of TWRP does not work. I have no preferences when it comes to OS's. A stock OS (is OS and ROM the same thing?) would be fine.
Also, found out that doing stuff on a Windows 7 laptop was easier than on my own Windows 8. The phone is at least detected on the Windows 7, which means I will be able to flash stuff to it through cmd, something I wasn't able to do from the Windows 8.
PrimalMK said:
Version of TWRP is 2.5.0.0. Currently trying to re-install an OS. Need one that the current version of TWRP can flash to the phone, as flashing a new version does not work. I have no preferences. A stock OS (is OS and ROM the same thing?) would be fine.
Click to expand...
Click to collapse
Well your going to need adb / fastboot on your PC
use mine here >> https://www.dropbox.com/s/0wzwt8843zx27nh/Fastboot.zip
and install the HTC Drivers here >> http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
unzip that to c:\ so you have c:\fastboot in windows explorer
now inside the folder you shift + right click / command prompt here
now you have a command prompt window type
fastboot getvar all
and post the result here / minus your serial number and IMEI
then i can find you the correct recovery and rom for your phone
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
PrimalMK said:
Also, found out that doing stuff on a Windows 7 laptop was easier than on my own Windows 8. The phone is at least detected on the Windows 7, which means I will be able to flash stuff to it through cmd, something I wasn't able to do from the Windows 8.
Click to expand...
Click to collapse
yes window 8 will be a problem till you get another hboot above 1.44/1.54
hboot 1.55 has no problem on windows 8 ( I use windows 8.1)
clsA said:
instructions
Click to expand...
Click to collapse
Downloaded fastboot, unzipped in c:
Drivers from that link are classed as malware. Trying to find earlier drivers/other mirror.
Find attachment.
Still looking for drivers. Apparently "every" browser blocks exe-files from being downloaded. Changed settings, managed to download it, run as admin. No response.
PrimalMK said:
Find attachment.
Still looking for drivers. Apparently "every" browser blocks exe-files from being downloaded. Changed settings, managed to download it, run as admin. No response.
Click to expand...
Click to collapse
this will work fine
just put TWRP and the Rom in the fastboot folder
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse
clsA said:
this will work fine
just put TWRP and the Rom in the fastboot folder
Click to expand...
Click to collapse
error: cannot open 'openrecovery.......img'
What to do?
PrimalMK said:
error: cannot open 'openrecovery.......img'
What to do?
Click to expand...
Click to collapse
is it in the fastboot folder ?
clsA said:
is it in the fastboot folder ?
Click to expand...
Click to collapse
Yes, see screenshot.
PrimalMK said:
Yes, see screenshot.
Click to expand...
Click to collapse
is the command window in c:\fastboot ?
did you copy paste the command or try and type it ?
clsA said:
is the command window in c:\fastboot ?
did you copy paste the command or try and type it ?
Click to expand...
Click to collapse
My bad. Managed to run it, but then it crashes straight away. Can that have anything to do with the driver not installed?
PrimalMK said:
My bad. Managed to run it, but then it crashes straight away. Can that have anything to do with the driver not installed?
Click to expand...
Click to collapse
fastboot crashes ?
no if fastboot getvar worked it will all work
it's only 4 commands and your phone will be working
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
adb sideload rom.zip
sideload takes about 8 min
calculation icatkg
clsA said:
fastboot crashes ?
no if fastboot getvar worked it will all work
Click to expand...
Click to collapse
Restarted a couple of times etc. It worked. Will do the ROM thing now.
PrimalMK said:
Restarted a couple of times etc. It worked. Will do the ROM thing now.
Click to expand...
Click to collapse
great your about done ...your phone will be android 4.3 when it finishes
don't take any updates to the OS
cmd said it sent the ROM to the phone. I was in the TWRP adb sideload on my phone when it was transferred. Then that was it. 100% on cmd. Phone shut down. Suddenly discovered I had to install on the phone. WAT. I do so, then wait until completion. I anxiously restart the phone. It's alive again!
Really, thanks so much clsA! You made me a very happy person! :victory:
PrimalMK said:
cmd said it sent the ROM to the phone. I was in the TWRP adb sideload on my phone when it was transferred. Then that was it. 100% on cmd. Phone shut down. Suddenly discovered I had to install on the phone. WAT. I do so, then wait until completion. I anxiously restart the phone. It's alive again!
Really, thanks so much clsA! You made me a very happy person! :victory:
Click to expand...
Click to collapse
no problem, hit the thanks button