Related
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Now restore or install any ROM.
Napstar said:
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Click to expand...
Click to collapse
Now it would sound so silly to you Napstar, but I have to accept it that I don't know how and I dont want to take a wrong direction. Since I'm very new to this, can you help guiding me on how to install ROMs. Yes, you are right I can still get into recovery mode, but I just don't know how to continue and where I can get all those ROMs. Please bear with me.
Thank you, Pitt.
just go to android development section and look at the beginner guide its easy don't worry
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
need guide to install ROMs
kshitij_bhatt said:
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
Click to expand...
Click to collapse
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
pittms said:
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
Click to expand...
Click to collapse
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
take A99 from here : https://www.sugarsync.com/share/ddhcyiw66cyqt
do as i mentioned above and ud be ok
haree said:
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
do as i mentioned above and ud be ok
Click to expand...
Click to collapse
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
okk now u got it all wrong/// uc kernals are NOT ROMS u need to download the .zip file for them and copy to sd card reboot into cwm recovery and install zip from sd card
u are getting it all wrong these are Not roms these are kernals ./... and i will suggest u not to install as i can see its a heavy thing and u r not familiar with kernals and roms...
first of all u need to download software update tool
then u need stock firmware which u could find here
mostly all the files u need are available HERE
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
haree said:
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
Click to expand...
Click to collapse
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
pittms said:
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
Click to expand...
Click to collapse
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
Which recovery version are you using?
CWM v5.0.2.3 has an option for mounting sdcard as USB device.
Boot into recovery
Connect your device to PC via USB
Option mount and storage >> mount USB storae
Stay in that menu till you want to use your sdcard (for copying files)
If you have recovery menu v2.
Choose CWM recovery first and do nb0 file copying by following above instructions.
Then reboot into recovery (advanced >> reboot recovery)
Choose stock recovery and choose install firmware.nb0 option.
If this gives any errors post it here. Someone amongst us will surely help you.
Best of luck!
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
hi
i dont get it
1. is ur USB cable not working
if working then all u need to do is connect ur phone to pc and copy the fbo to root of sd and do the flash
2. u can do Napsters method
3. if u have a Sd adapter then use it and copy the Fb0 to root of sd and do the needfull
goodluck
Now it is back to work again. Thank you very much for all the hands!!
Sent from my CSL-MI410 using XDA App
WELLCOM A99(Thai) i need ROM PLZ help me
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
cazwj said:
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
Click to expand...
Click to collapse
hi
a little bit of searching would have solved ur problem
it is available in the rollup thread anyway take it from below link
Link : http://www.mediafire.com/FB400
i have S1 running so helly bean 4.1.1 but it slow and bug
i say i do format to solve this probleme but when i format its still stop in boot screen and reboot
and also i cant go into mode recovery
You must flash with ODIN.
ACroOsS said:
i have S1 running so helly bean 4.1.1 but it slow and bug
i say i do format to solve this probleme but when i format its still stop in boot screen and reboot
and also i cant go into mode recovery
Click to expand...
Click to collapse
You should not ask here but your problem can ask in Hellybean thread.
For your problem I believe that you can go into "Download" mode so flash Gingerbread stock rom (JVU or newer recommend).
PS. Don't ask to backup data because I try many way but there's no way to go recovery mode from your problem.
how can i install a new rom from download pls give me a topic
ACroOsS said:
how can i install a new rom from download pls give me a topic
Click to expand...
Click to collapse
try to get in download mode(i think it is volume up + power button),open odin(download it first) and download a stock rom and flash it.I dont if this works because I have i9001(s plus) but Im sure that it is similar.I fixed my s plus yesterday when it didn want to boot with odin and I have stock rom again now,Search for xda for more information.
Hello, everyone. My first post, so I'll try not to make it terrible and try to keep it short. I've just stepped into the world of Android from using an iPhone. Currently using an SGH-i897. I rooted my phone, unlocked and went to install a custom Jelly Bean. I wiped data/factory, cache partition, dalvik cache and then did Format/system in Recovery mode. At this point I realized I made two really dumb mistakes. I hadn't installed ClockworkMod Recovery. I also didn't put my files on the Internal SD as I was supposed to, be on my external SD instead. I chose to reboot system so I could get back to my main system and fix what I'd done so I could continue properly. Welp, now I'm stuck at "system Corps" with the corn fella. The bar will finish loading, then just stays with corn alien. I can still get into Recovery if I want, but I'm not sure where to take it from here. I've read a few posts from people with different phones and it sounds like they have to flash official firmware with Odin or something?
Thank you for any help that can be offered.
*EDIT*
Finally got phone into Download mode again. I feel this is where I need to be heading, but I'm not sure what to do at this point.
If u can use the button combo to reboot into Recovery, u can go to mounts and storage and mount usb and connect to ur pc and copy ur rom over to ur phone's internal sdcard. And since u have the Corn Kernel installed...u have CWM Recovery. (Don't use Rom Manager).
If u cannot get into Recovery Mode, then get into Download mode and start over.
Take ur time, read, read, and be sure u know what ur doing. There r a lot of Stickied threads that contain a wealth of info. :good:
4-2ndtwin said:
If u can use the button combo to reboot into Recovery, u can go to mounts and storage and mount usb and connect to ur pc and copy ur rom over to ur phone's internal sdcard. And since u have the Corn Kernel installed...u have CWM Recovery. (Don't use Rom Manager).
If u cannot get into Recovery Mode, then get into Download mode and start over.
Take ur time, read, read, and be sure u know what ur doing. There r a lot of Stickied threads that contain a wealth of info. :good:
Click to expand...
Click to collapse
There are indeed, and I hate being that noob that asks anyway. It doesn't help I've been stuck home today with the flu, which together with this situation is really testing my patience. I think I just needed the support and someone hinting in some way, shape or form as you have that I'm not completely boned. I'll continue plugging away and see what comes out of it. Thank you much!
Try to install one click stock 2.1 ROM.. Google it, you vl find the Rom. Double click on one click odin after downloading, connect your phone to computer. Get your phone into download mode, click on start in odin. Tatz it. Stock Rom vl b installed
tkharishreddy said:
Try to install one click stock 2.1 ROM.. Google it, you vl find the Rom. Double click on one click odin after downloading, connect your phone to computer. Get your phone into download mode, click on start in odin. Tatz it. Stock Rom vl b installed
Click to expand...
Click to collapse
OP - Don't do this.. If you flash back to stock, flash Odin KK4 without bootloaders (as you're already on GB).
Hiya,
I was in the process of rooting a Galaxy S I9000 and ended up picking the wrong clockworkmod image.
instead of applying version 2.5.1.2 i eneded appyling 3.0.0.5
The phone currently has no OS on it and therefore can only boot in the clockworkmod manager.
On the otherhand i currently can not access any of the partitions or the sdcard on the phone.
Is there any way to apply the right recovery manager?
thx,user7474.
user7474 said:
Hiya,
I was in the process of rooting a Galaxy S I9000 and ended up picking the wrong clockworkmod image.
instead of applying version 2.5.1.2 i eneded appyling 3.0.0.5
The phone currently has no OS on it and therefore can only boot in the clockworkmod manager.
On the otherhand i currently can not access any of the partitions or the sdcard on the phone.
Is there any way to apply the right recovery manager?
thx,user7474.
Click to expand...
Click to collapse
only engine without body? how should u operate that? use odin to get to firmware
see here for detail
http://forum.xda-developers.com/showthread.php?t=2149455
Sent from my GT-I9000 using xda premium
yeah i ended up at some strange facing to different version of the recovery boot manager and for some stupid reason the one with higher version number sounded like the better option.
also somewhere in that process i managed to kill the OS.
at least i managed to restore the partitions with odin and can now access the 'wrong' boot manager.
unfortunately i can not access any of the partitions from the pc via usb
compacity said:
only engine without body? how should u operate that? use odin to get to firmware
see here for detail
http://forum.xda-developers.com/showthread.php?t=2149455
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
user7474 said:
yeah i ended up at some strange facing to different version of the recovery boot manager and for some stupid reason the one with higher version number sounded like the better option.
also somewhere in that process i managed to kill the OS.
at least i managed to restore the partitions with odin and can now access the 'wrong' boot manager.
unfortunately i can not access any of the partitions from the pc via usb
Click to expand...
Click to collapse
actually, i dont really get what u want to do, if u can go to download mode, juz flash some firmware n u got back ur fone, added cf root if u wanna some root.thats da easiest way to obtain back ur fone, unless u cannot flash thru odin, then thats different story.
Sent from my GT-I9000 using xda premium
i was not aware that i still can flash the phone in it is current state eg with that busted boot loader.
so can i for now just use odin and flash some OS down the phone with worrying the busted boot loader?
and once i am done with that take care of the boot loader afterwards?
that be grooovy
compacity said:
actually, i dont really get what u want to do, if u can go to download mode, juz flash some firmware n u got back ur fone, added cf root if u wanna some root.thats da easiest way to obtain back ur fone, unless u cannot flash thru odin, then thats different story.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
what do u mean by "busted bootloader" ? can u explained ur situation please? and thank you.
as far as i know, any i9000 that can enter download mode (home+vol down+power) can be brought back to life with odin. Instruction already been given before, n any file necessary also there to download, juz read n follow real carefully, thats all.
Sent from my GT-I9000 using xda premium
sorry about that.
i meant wrong boot loader.
basically the wrong version one.
which can not be accessed from the pc via usb.
i was actually planing to try to install Cyanogen on to my phone.
can i my current position just on like the guides by Cyanogen are referring?
compacity said:
what do u mean by "busted bootloader" ? can u explained ur situation please? and thank you.
as far as i know, any i9000 that can enter download mode (home+vol down+power) can be brought back to life with odin. Instruction already been given before, n any file necessary also there to download, juz read n follow real carefully, thats all.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
As long as u can enter download mode (3 button combo), da answer would be Yes, U can, but read carefully before doing anything.
u should install firmware first to gain accessability to system, new partition n ur efs first, flashing direct when ur doesnt even know what android version inside ur system kinda silly,
Please follow da instruction given in da link to obtain GB firmware first, followed by flashing CF-Root to gain CWM n root access to allow u to updated it further, after that u can flash any custom rom out there, but remember, its a safety measure to jump accordingly (GB-ICS-JB/CM7-CM9-CM10 or CM10.1)
but as i always say here, flash at ur OWN RISK
Sent from my GT-I9000 using xda premium
howdy,
sorry for my absense, but I've busy up to my eyeballs.
I did try to access the phone again via odin and unfortonately can not open any COM port on the phone...for some reason which might be above my level.
However I did install the Android SDK to try out some ADB commands.
since i heard from somewhere that i should try ADB commands
like the following
\fastboot.exe erase cache
..\fastboot.exe erase userdata
..\fastboot.exe flash boot
..\fastboot.exe flash recovery
..\fastboot.exe flash userdata
..\fastboot.exe flash system
..\fastboot.exe reboot
but iam not really sure which ones to use.
on the other hand since i can not boot the phone also can not 'talk' to the pc.
compacity said:
As long as u can enter download mode (3 button combo), da answer would be Yes, U can, but read carefully before doing anything.
u should install firmware first to gain accessability to system, new partition n ur efs first, flashing direct when ur doesnt even know what android version inside ur system kinda silly,
Please follow da instruction given in da link to obtain GB firmware first, followed by flashing CF-Root to gain CWM n root access to allow u to updated it further, after that u can flash any custom rom out there, but remember, its a safety measure to jump accordingly (GB-ICS-JB/CM7-CM9-CM10 or CM10.1)
but as i always say here, flash at ur OWN RISK
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Hey ! I want to install the stock rom for i8190. A long time ago I tried this and i fixed it (in 2 days :laugh , but i don't want to have this problem again.
Hello everyone ! I have a samsung galaxy s3 mini i8190
I flash CM , but i didn't like it so i tried to install with odin the original firmware.
Problem: Bootloop (logo Samsung Galaxy S3 Mini reboot infinite loop)
I can't enter in Recovery Mode, only i can enter in Download Mode
I use ODIN to try to install CWM , but still don't work..
And i have another problem. When I click start (in odin) it stops at SetupConnection, but if I disconnect & reconnect (usb) it starts flashing.
Please, help me.
Click to expand...
Click to collapse
Link to the post click
So , can you help me to don't have this problem again?
// a tutorial maybe..
Vladdyak47 said:
Hey ! I want to install the stock rom for i8190. A long time ago I tried this and i fixed it (in 2 days :laugh , but i don't want to have this problem again.
Link to the post click
So , can you help me to don't have this problem again?
// a tutorial maybe..
Click to expand...
Click to collapse
i thought your problem was solved? anyway, maybe you need to install the usb drivers download here: http://get.maclaw.pl/?id=61
do you want to flash the original stock-rom or a stock based custom-rom?
Vladdyak47 said:
Hey ! I want to install the stock rom for i8190. A long time ago I tried this and i fixed it (in 2 days :laugh , but i don't want to have this problem again.
Link to the post click
So , can you help me to don't have this problem again?
// a tutorial maybe..
Click to expand...
Click to collapse
Hey need to factory reset every time dont forget to install 3 way reovery ok
Aloha Joe said:
do you want to flash the original stock-rom or a stock based custom-rom?
Click to expand...
Click to collapse
original stock rom
eswarvf said:
Hey need to factory reset every time dont forget to install 3 way reovery ok
Click to expand...
Click to collapse
What's 3 way recovery ?
Before I flash the original stock rom i have to stock recovery from benz0nator? ( url=http://forum.xda-developers.com/showthread.php?t=2150822]click[/url] )
Vladdyak47 said:
original stock rom
What's 3 way recovery ?
Before I flash the original stock rom i have to stock recovery from benz0nator? ( url=http://forum.xda-developers.com/showthread.php?t=2150822]click[/url] )
Click to expand...
Click to collapse
No use cwm or twrp [recommended by devs here ] and three way recovery is over here
eswarvf said:
No use cwm or twrp [recommended by devs here ] and three way recovery is over here
Click to expand...
Click to collapse
I read the comments in that topic. After this, I must use TriangleAway for binary reset?
So just flash ( i8190_buttonenable_cwm6.0.2.7.tar or i8190_buttonenable_cwm6.0.2.7.tar.md5_.zip i don't know who, please tell me) and after this
flash with odin original stock rom?