Hi
Yesterday, after flashing 4.0.4 ics i updated my galaxy note n7000 to 4.1.2 stock using samsung kies,. after that i inserted sim and rebooted the phone. the phone automatically rebooted into stock recovery and says some errors.
Please help..even after flashing stock firmwares via odin m not able to boot properly. I've tried 2.3.5,4.0.4,4.1.2 firmwares.
here is the pic.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You already had a thread made for the same error few days back. The same question.. did you try flashing a rom using the PIT file? http://d-h.st/FVh (Don't use it if you have 32GB model.).
In your previous thread you said 4.0.4 works fine? whats the status now?
nokiamodeln91 said:
You already had a thread made for the same error few days back. The same question.. did you try flashing a rom using the PIT file? http://d-h.st/FVh (Don't use it if you have 32GB model.).
In your previous thread you said 4.0.4 works fine? whats the status now?
Click to expand...
Click to collapse
yes i created this thread again as i got no reply there.
yeah i tried that with lt6,lt5 and i still get the same error.
yesterday, i flashed ics 4.0.4 on ics i got no error in recovery mode. but after flashing ics 4.0.4 i updated to 4.1.2 via kies and then inserted simcard n rebooted and i get same error..since then i tired 2.3.5,4.0.4,4.1.2 firmware and i get same error..yes i flashed pit file too. stil no luck
So to conclude.. as of now, your phone is booting fine with ICS 4.0.4, no error in recovery as well?
nokiamodeln91 said:
So to conclude.. as of now, your phone is booting fine with ICS 4.0.4, no error in recovery as well?
Click to expand...
Click to collapse
No my note is not booting up in any stock firmware now! no 2.3.5,4.0.4,4.1.2! i cannot boot .
Flash ICS rom again.. boot into recovery and paste a pic. Also the odin screen shot as well after flashing is completed.
nokiamodeln91 said:
Flash ICS rom again.. boot into recovery and paste a pic. Also the odin screen shot as well after flashing is completed.
Click to expand...
Click to collapse
here
did odin flash the rom successfully? I mean the FactoryFS, cache img etc? ... now if you boot into download mode, flash Philz kernel from odin, what happens?
nokiamodeln91 said:
did odin flash the rom successfully? I mean the FactoryFS, cache img etc? ... now if you boot into download mode, flash Philz kernel from odin, what happens?
Click to expand...
Click to collapse
Yes everytime i flash a stock firmware from odin it is successfully flashed! it flashes factoryfs,cache,kernel,etc etc..
you mean flash philz kernel via odin right?
Yeah..
nokiamodeln91 said:
Yeah..
Click to expand...
Click to collapse
if i flash philz kernel via odin i get no access to recovery. i only get download mode
Once you flash philz kernel using odin.. remove the usb cable, remove the battery.. re-seat the battery after 10 seconds.. then press vol up+home+power till you see the GT N7000 screen.. then leave the keys. See if you can get to CWM.
nokiamodeln91 said:
Once you flash philz kernel using odin.. remove the usb cable, remove the battery.. re-seat the battery after 10 seconds.. then press vol up+home+power till you see the GT N7000 screen.. then leave the keys. See if you can get to CWM.
Click to expand...
Click to collapse
Sorry i was busy with my exams. i just tried that and i cannot go into cwm recovery.
I Also flash pitfiles and i still cannot get the phone working
Related
I just tried to do a ROM update: http://forum.xda-developers.com/showthread.php?t=940671
And now after the phone reboots I get the flashing boot screen Samsung GT-i9000. I can get back into download mode, but nothing else.
What shoudl i do? This is my first time doing this, go figure....lol
yet another deadly post.
anyway reflash the darkys 9.2 make sure you add 512 pit and tick the re-partition box in odin.
make sure KIES is closed if you have it, even in the icon tray.
let odin do its thing, if the phone starts talking after the flash dont panic, its normal
I just did that and no luck. same thing... I just remembered that I had recovery 3e not 2e. does that matter???? I am getting a flashing loading circle (looks like a sun) in the middle of the screen. Then I unplug the usb, and get a flashing galaxy s boot screen.
that dont matter as darkys rom will give you 2e recovery (voodoo kernel)
load all your files into odin and take a screenshot and post it here so i can double check for you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://flic.kr/p/9Ewk8t
LOL, this is the best I can do...
omygod said:
http://flic.kr/p/9Ewk8t
Click to expand...
Click to collapse
well all that looks good
try using odin 1.7 its much safer you may get better results.
if that fails we will have to get you back to stock and try again
I did buy this phone used, so it might have not had a stock rom on it? would that matter... I will try odin 1.7 first. Thanks again for the help!!!!
no that does not matter, putting the phone back to stock will in theory make the phone new again. then we can eradicate any errors and start again.
let me know how it goes with odin 1.7
Try to put the original gingerbread rom and follow the video in darky's post. I flashed the same rom some time ago and had no problems. Be careful in Odin what options you check/uncheck and to put the PHONE, PDA and CSC.
Good luck.
Still no luck.....
Same flashing screen....
BTW this is a GTi9000-M
sap7e said:
Try to put the original gingerbread rom and follow the video in darky's post. I flashed the same rom some time ago and had no problems. Be careful in Odin what options you check/uncheck and to put the PHONE, PDA and CSC.
Good luck.
Click to expand...
Click to collapse
original gingerbread rom???? From????
PHONE, PDA and CSC.
???? I never put anything under phone or csc
bell version ?? well you forgot to tell me that earlier didnt ya ? lol
what rom was you on prior to this ?
you ony get phone pda csc when you have a full firmware. darkys 9.2 is compressed into 1 pda .md5 file so dont worry
Model: i9000M
Firmware: 2.2
Baseband: I9000XXJPK
Kernal: 2.6.32.9 shout.lee @ SEP-09 #6
Build: FROYO.UGJL2
LOL, sorry man...
looks stock to me.
as if darkys 9.2 hasnt even touched your phone
before we get you flashing back to stock, download and flash a kernel that supports I9000M - something like CF-Root, speedmod, voodoo..
flash that through ODIN and let me know if its successful, then we can do a wipe and flash something else in recovery
Can you recommend one (Link)? I have no idea what one to use.
------
I propose also versions only the lagfix only, called stock+Voodoo because they are build around the kernel compiled by Samsung
stock+Voodoo-latest XYJS8:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XWJS8.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XYJS5:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XWJS5.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XYJS3:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XWJS3.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XXJPY:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XXJPY.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XXJPX:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XXJPY.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
JPX, JPY, JS3 versions are based on Samsung pre-compiled kernels. This is why those are feature limited (no Voodoo sound, no BLN, no sharpness adjustment).
-----
One of these any good?
I just found this one:
http://forum.xda-developers.com/showthread.php?t=822756.
Version: K13E (12-Apr-2011)
K13 works with official Android 2.2.1 firmwares.
K13 is also compatible with older Android 2.2 firmwares.
Odin versions:
SpeedMod K13E with HZ=500 (Recommended) (QUOTA EXCEEDED FOR DOWNLOADS)
ClockWorkMod versions:
SpeedMod K13E with HZ=250 CWM
SpeedMod K13E with HZ=250 CWM BIGMEM (355MB RAM, no 720P video recording)
SpeedMod K13E with HZ=500 CWM
SpeedMod K13E with HZ=500 CWM BIGMEM (355MB RAM, no 720P video recording)
You can download some of the versions and the source code from XDA forums.
Version: K13D (21-Mar-2011)
Odin versions:
SpeedMod K13D with HZ=500 (Recommended)
Is this one good?
ClockWorkMod versions:
SpeedMod K13D with HZ=250 CWM
SpeedMod K13D with HZ=500 CWM
SpeedMod K13D with HZ=500 CWM BIGMEM (355MB RAM, no 720P video recording)
i dont know lol,
im not familiar with the bell version, i dont wanna give false information and make things worse for you.
is there no CF-root for your version ??
omygod said:
I just found this one:
http://forum.xda-developers.com/showthread.php?t=822756
Click to expand...
Click to collapse
use that one
Ok, I got the older version the newer one isn't allowing any downloads due to quota issues. I have a .tar, now what? remember this is my first time doing this, so please be nice...lol not that u aren't....
---- Actually I think I got it form the bottom of the page now.. 13e 500hz.tar----
Do I put repartition check? and a pit file too? I assume IO put the .tar under pda?
Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.
and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?
Roszaidee said:
Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.
Click to expand...
Click to collapse
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!
Ironically, I just flashed mine with the one found on samfirmware.com as I needed to send my unit back to Samsung for RMA on the battery, (battery kept on shutting down for no reason) and it worked just fine. Phone, CSC was all there. They gave it the once over and actually "reformatted" it for me, just to diagnose in case it wasn't a software issue. Lo and behold, it shut down on them right after the "reformatting" and confirmed my issues for them!
Just follow the restocking part of the guide found on Teamovercome.net, but instead of using the standard JQ1.tar file we provided, just use the tar file that came from samfirmware and you should be alright. That's what I did anyway, and it was all fine.
Just remember to do change the CSC from the Korean one to your appropriate market's CSC. The Malaysian CSC was XME.
Roszaidee said:
and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?
Click to expand...
Click to collapse
If i remember correctly, after flashing the firmware, go to recovery mode, it will do some initialisation and once it's done, you do a reboot, you should see the pda & csc..
bongski55 said:
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!
Click to expand...
Click to collapse
tried flashing DXJK2 but it keeps on rebooting at samsung logo.
OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.
cymagnus said:
OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.
Click to expand...
Click to collapse
Thanks alot! It works
Sent from my GT-P1000 using XDA Premium App
Can someone upload the P1000DXJPE rom from samfirmware.com ? Its too slow, impossible to download the firmware from hotfile.com
What link do you prefer?
Sent from my GT-P1000 using XDA Premium App
Roszaidee said:
What link do you prefer?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Which ever which is fast and reliable... such as
..filesonic..sg
..megaupload..com
..mediafire..com
Thanks man.
Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL
Roszaidee said:
Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL
Click to expand...
Click to collapse
Thanks man. The download is fantastic at 450KB/s.
Download completed.
can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pls help me
ameerali19 said:
can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
pls help me
Click to expand...
Click to collapse
thanks friends
i got the file from http://hotfile.com/dl/120112727/77ed932/P1000DXJPC_OLBJPC_DXJPC.rar.html
Okay..So I am Trying to solve this Bull**** Problem...My Gf ..Booted in CWM (Latest Because I flashed CM 10.X in her i9000 16 GB)
and She Formatted everything from CWM because phone was hangs :laugh:...Now the Device is only booting in "Download mode" & after lot's off Searching and flashing many .tar CWM....I got latest *i think its* Semaphore CWM Recovery v5.0.2.7 ....and now I saved Slim ROM in root of SD card But When i Boot in CWM and try to Flash that Zip...it is unable to find that Zip...
Got errors like this
=======================
E: unknown volume for path [/cache/recovery/command]
E:unknown volume for path [/sdcard]
E:Can't mount /sdcard/
and same for data etc
So what's next ?
n00BXperia said:
Okay..So I am Trying to solve this Bull**** Problem...My Gf ..Booted in CWM (Latest Because I flashed CM 10.X in her i9000 16 GB)
and She Formatted everything from CWM because phone was hangs :laugh:...Now the Device is only booting in "Download mode" & after lot's off Searching and flashing many .tar CWM....I got latest *i think its* Semaphore CWM Recovery v5.0.2.7 ....and now I saved Slim ROM in root of SD card But When i Boot in CWM and try to Flash that Zip...it is unable to find that Zip...
Got errors like this
=======================
E: unknown volume for path [/cache/recovery/command]
E:unknown volume for path [/sdcard]
E:Can't mount /sdcard/
and same for data etc
So what's next ?
Click to expand...
Click to collapse
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
strikoo said:
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
Click to expand...
Click to collapse
Wow..Can you give me that Thread's Link ? :highfive:
strikoo said:
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
Click to expand...
Click to collapse
i would flash latest cm nightly first before flashing slim if i was you,or risk losing imei.
Check out slappys recovery kit
http://forum.xda-developers.com/showthread.php?p=38073271
Anyone give me "Flash stock GB with odin using repartition option." ''s Thread Please
Stock ROM List
http://forum.xda-developers.com/showthread.php?t=1102881
If U Need Latest Indian Firmware Just Reply In FB i Will Upload It ....
Thanks Everyone for your Support ..will Test & post results ASAP!
Sent from my Micromax A87. Ninja 4.0 using Tapatalk 2
Check My HOW TO GUIDE
ODIN flash i9000 in google.
Just mark repartition field in Odin before flashing.
You can download latest stock firmware from sammobile.com or samsung-updates.com
mark26 is right, it would be good to flash first CM10.1 than Slim Bean 4.2.2.
BACKUP YOUR EFS PARTITION after you root stock firmware
Thanks EveryOne..I flashed "DarkyROM_10.2_Resurrection.zip" using Odin..Now its booted..after 12 minutes..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now Flashing CM10...Booting
You didn't mark Re-Partition. But I'm glad that it booted.
strikoo said:
You didn't mark Re-Partition. But I'm glad that it booted.
Click to expand...
Click to collapse
Yup...I was thinks for using repartition option if I failed after normal flash.
n00BXperia said:
Yup...I was thinks for using repartition option if I failed after normal flash.
Click to expand...
Click to collapse
Great thinking :good:
Hahahh I am so Intelligent xD ...lol
Sent from my Micromax A87. Ninja 4.0 using Tapatalk 2
Hallo guy. . .i faced a wierd problem here n realy2 need some of u all help. . .my phone cant start n stuck at kernel logo for a few minute n going to black screen. . .my phone still can go to cwm recovery but there some error appear cant read last activity n there useless even i reflash rom(have try at cm9 n ginger reloaded rom with step that should be made for rom flashing).I also can go to download mod n flash the original firmware via odin but after flashing my phone still stuck at cm9 k kernel logo n that totaly make me confuse until forced me to make this statement here n hope for some help. . .i have try flashing rom via odin at two diffrent computer n the result is negetive. . .for info i using cm9 final with xperia z launcher and k kernel,please guys i realy2 need help before send my phone to shop tommorow n thats was my last option.
Sorry for my bad english.
Reflash a stock ROM see my tutorial (open link below)
mrjraider said:
Reflash a stock ROM see my tutorial (open link below)
Click to expand...
Click to collapse
Thanks i'll try.
mrjraider said:
Reflash a stock ROM see my tutorial (open link below)
Click to expand...
Click to collapse
After all step my phone will reboot but stuck at battery logo n not charging to until i disconect the cable n start the phone manualy but the result is same like before. . .
Try to get in recovery and perform a factory reset
mrjraider said:
Try to get in recovery and perform a factory reset
Click to expand...
Click to collapse
all option in cwm cant solve my problem there have an error message at cwm cant read recovery last log
:crying:
try wiping cache in recovery
syamz84 said:
all option in cwm cant solve my problem there have an error message at cwm cant read recovery last log
:crying:
Click to expand...
Click to collapse
check what version is your CWM, if ver 5, you need to change to ver 6, flash CWM ver 6 with ariesVe.ops using odin 4.43
the other option being a bootloader problem
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
xsenman said:
check what version is your CWM, if ver 5, you need to change to ver 6, flash CWM ver 6 with ariesVe.ops using odin 4.43
the other option being a bootloader problem
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Click to expand...
Click to collapse
i already using cwm6 and also have try to flash boot.tar via odin but still no luck...i think my problem is with internal sd that need to repartition...can some one gve me suggestion on how to do that?
syamz84 said:
i already using cwm6 and also have try to flash boot.tar via odin but still no luck...i think my problem is with internal sd that need to repartition...can some one gve me suggestion on how to do that?
Click to expand...
Click to collapse
Look in My Guide and Manuals"]My Guides and Manuals[/URL], under SD card section
xsenman said:
Look in My Guide and Manuals"]My Guides and Manuals[/URL], under SD card section
Click to expand...
Click to collapse
still have no luck until today...the only hope is to boot from external sdcard...did u guys have the link for that?:crying:
syamz84 said:
still have no luck until today...the only hope is to boot from external sdcard...did u guys have the link for that?:crying:
Click to expand...
Click to collapse
Look in My Guides and Manuals
SD Card Section
How to Flash a Rom with a broken SD card
How to Flash without SD card
i9001 swap SD card
How to Swap SD cards
Internal SD card Solutions :- Here & Here & Here
How to use Gparted FAQ
How to partition SD card here and here
Increase RAM using Swap File and Swap Partition
Swap Internal and External SDcard of ANY Android phone
Had just uploaded Vold.fstab file for switching SD cards.
You , YES! you are an " Android ".
You Must watch this documentary concerning your privacy Terms & Conditions we agree to
How to say Thank you?If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
On my note gt-n7000 device, I have installed cwm using hiemdall. Now I am only able to go to the recovery mode by pressing the vol up + home + power keys, but when I try to boot normally, it stops at the boot screen. Please help me how I can come out of this boot loop. I have tried things like removing cache but they didn't work. I want to know what can be done to boot normal to my android. Or alternatively if I install CM from my sdcard will it boot normally to CM or it still continues to struck with CWM?
Start by telling us how you installed cwm
durga_prasanth said:
On my note gt-n7000 device, I have installed cwm using hiemdall. Now I am only able to go to the recovery mode by pressing the vol up + home + power keys, but when I try to boot normally, it stops at the boot screen. Please help me how I can come out of this boot loop. I have tried things like removing cache but they didn't work. I want to know what can be done to boot normal to my android. Or alternatively if I install CM from my sdcard will it boot normally to CM or it still continues to struck with CWM?
Click to expand...
Click to collapse
Try flashing a custom ROM and see if it boots
Just mount USB storage from recovery and flash the zip file
nokiamodeln91 said:
Start by telling us how you installed cwm
Click to expand...
Click to collapse
I downloaded the cwm for my model (samsung galaxy note gt n7000) and flashed it when the mobile is in download mode using heimdall suite with the following command
heimdall flash --kernel zImage --no-reboot
I don't know whether the no-reboot has caused such error. But when I have gone through the readme.txt for heimdall suite help, it says that the no reboot only prevents it from automatically getting it rebooted but should work fine when we use the power button.
xMorpheus said:
Try flashing a custom ROM and see if it boots
Just mount USB storage from recovery and flash the zip file
Click to expand...
Click to collapse
Since I am unable to boot normally now itself. I am worried if the same things continues even after flashing new ROM.
durga_prasanth said:
Since I am unable to boot normally now itself. I am worried if the same things continues even after flashing new ROM.
Click to expand...
Click to collapse
By flashing a new rom, u basically rewrites existing program and commands of your device, so if not due to wrong flash procedures or bad download, there's no way your phone won't boot.
Jackwu696 said:
By flashing a new rom, u basically rewrites existing program and commands of your device, so if not due to wrong flash procedures or bad download, there's no way your phone won't boot.
Click to expand...
Click to collapse
Okay, but I have one more doubt about how to flash. I am thinking of flashing it with CM 10.2 and hence downloaded the zip. Now can I copy paste the zip file on to my external sd card, put it back to my mobile and flash it or is it better to use adb commands to transfer the file and flash. I just want to know whether the difference in these methods can cause any problem?
durga_prasanth said:
Okay, but I have one more doubt about how to flash. I am thinking of flashing it with CM 10.2 and hence downloaded the zip. Now can I copy paste the zip file on to my external sd card, put it back to my mobile and flash it or is it better to use adb commands to transfer the file and flash. I just want to know whether the difference in these methods can cause any problem?
Click to expand...
Click to collapse
All u need is to copy the zip.file n gapps to your external sd, reboot to recovery, flash r4/r5 kernel, reboot recovery again and follow OP of installing CM 10.2
Sent from my GT-N7000 using XDA Free mobile app
Which file did you download for Cwm...? And what was the phone running before the flash?
nokiamodeln91 said:
Which file did you download for Cwm...? And what was the phone running before the flash?
Click to expand...
Click to collapse
I have downloaded from the clockworkmod website for galaxy note (version 6.0.4.3). Yes the phone is running normally before the flash.
durga_prasanth said:
I have downloaded from the clockworkmod website for galaxy note (version 6.0.4.3). Yes the phone is running normally before the flash.
Click to expand...
Click to collapse
Thats incorrect...You cannot flash the file you got from CWM site on N7000. Now do not flash using CWM.. Flash a stock rom using Odin or download Philz kernel tar file and flash it usiing odin...
I meant which firmware... if it was JB, after flashing Philz XXLTA or XXLSZ kernel try to boot the phone...
nokiamodeln91 said:
Thats incorrect...You cannot flash the file you got from CWM site on N7000. Now do not flash using CWM.. Flash a stock rom using Odin or download Philz kernel tar file and flash it usiing odin...
I meant which firmware... if it was JB, after flashing Philz XXLTA or XXLSZ kernel try to boot the phone...
Click to expand...
Click to collapse
yea I was having JB. So, now since that cwm which I have installed is wrong, now I can only install roms through odin? Can you tell me the versions of odin and cm that are compatible for n7000.
durga_prasanth said:
yea I was having JB. So, now since that cwm which I have installed is wrong, now I can only install roms through odin? Can you tell me the versions of odin and cm that are compatible for n7000.
Click to expand...
Click to collapse
First get the phone booting... Install Philz XXLTA kernel TAR file using odin and check if the phone boots.
nokiamodeln91 said:
First get the phone booting... Install Philz XXLTA kernel TAR file using odin and check if the phone boots.
Click to expand...
Click to collapse
okay I'll try that
nokiamodeln91 said:
First get the phone booting... Install Philz XXLTA kernel TAR file using odin and check if the phone boots.
Click to expand...
Click to collapse
I am not able to find the philz xxlta kernal. Can you please send me the linke to zip/tar file. There are too many files and I just want to be sure that I go with the right one this time. Thank you.
durga_prasanth said:
I am not able to find the philz xxlta kernal. Can you please send me the linke to zip/tar file. There are too many files and I just want to be sure that I go with the right one this time. Thank you.
Click to expand...
Click to collapse
Here you are right to download page http://d-h.st/users/philz_touch/?fld_id=25295#files Credits belong to @Phil3759. Both tar n zip is there
Sent from my GT-N7000 using XDA Free mobile app
Use the TAR not zip.
I have tried installing the above philz cwm 6 kernel using odin. But the installation failed. I am getting the following message after 2 minutes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
durga_prasanth said:
I have tried installing the above philz cwm 6 kernel using odin. But the installation failed. I am getting the following message after 2 minutes.
Click to expand...
Click to collapse
how did you install?
I got that the error is due to samsung kies which is trying to interfere with odin. I unchecked "Run Samsung Kies automatically when a device is connected" option from tools -> preferences in kies and tried. It worked and I got the phone booted normally back to JB now.