Database Develop

[Q] E: part(1) DATA Checksum Error

I just booted my Galaxy tab into recovery and noticed the following three error lines in red:
E: part(1) DATA Checksum Error
E: part(1) Checksum error
Internal MMC Checksum verify failed
I'm running stock Gingerbread.
My tab works perfectly fine and I think I know why this message appears when I enter recovery. I recently rooted my tab using DooMLoRD's rooting tool. After rooting I removed some bloatware and of course the rooting tool installed some stuff like SU which I know is installed as system app.
I never entered recovery before rooting so I don't know if whatever this means was already there before gaining root access.
However, I think E: part(1) is probably the system partition which was modified when/after rooting (although is not meant to be modified) and that is why the checksum fails, because the system partition -which is not supposed be changed- was actually altered by rooting and removing and adding system apps.
Can any knowledgeable developer/advanced user confirm if my explanation makes sense? I just want to make sure that this is not something I should be worried about.

samy
i have the same problem dose anyone know the answer ?

samycito said:
i have the same problem dose anyone know the answer ?
Click to expand...
Click to collapse
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.

yappoe said:
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.
Click to expand...
Click to collapse
does this thread still available? can i flash any dbdata.rfs? and how to flash the dbdata.rfs?
thanks

yappoe said:
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.
Click to expand...
Click to collapse
I don't have my tab handy at the moment but I think mine is running Android 2.3.4 and it's a P1000n. I'll get more info and post it here.

reflash
Hello everyone! I have a p1000l and with the same issue, even reflashing and getting back to stock defaults (without rooting) gives me these lines when on recovery mode, and some times if i turn off the device it wont turn on, stays on SAMSUNG logo for ages.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any clues how to fix this issue would be very nice!
Im also having some problems with google market, if i update it to google play, it keeps crashing, but i think its related to this error

having the same problem with my with my galaxy tab any idea how to fix this one gor int version of P1000
thanks

you must full erase with jtag and full flash dump with jitag.........and flashing phone with single file.....

Please Help Downgrade ICS Stock to Gingerbread Stock

Hi, I need to downgrade from stock ICS to stock Gingerbread (european firm). How I can do. What file I have to use?
I have to flash only PDA file, or PDA, CSC and MODEM files? And pit file?
Please do a little help for downgrade
Ex. N7000XXLA6 only have PDA file, and N7000OXALA3 have a lot of files (PDA, Kernel, pit, efs, CSC, MODEM, CODE, etc..)
I'am a little lost

Unkalo said:
Hi, I need to downgrade from stock ICS to stock Gingerbread (european firm). How I can do. What file I have to use?
I have to flash only PDA file, or PDA, CSC and MODEM files? And pit file?
Please do a little help for downgrade
Ex. N7000XXLA6 only have PDA file, and N7000OXALA3 have a lot of files (PDA, Kernel, pit, efs, CSC, MODEM, CODE, etc..)
I'am a little lost
Click to expand...
Click to collapse
Step 1) Read this:
http://forum.xda-developers.com/showthread.php?t=1424997
Step 2) Read it again.
Step 3) Download stock GB rom for ODIN from there. You need to get it down to tar format.
Step 4) Download ODIN
Step 5) Flash the PDA only. Make sure the options are ticked just like this picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6) ???????
Step 7) Profit (and hit thanks below my post)
You don't really need to flash the CSC as it will change your country code (but could if you want to). You don't really need to flash any MODEM files, as it will possibly change your wireless reception (for better or worse). Do not flash bootloaders or PIT files. You will never need to flash a bootloader with odin, no matter ICS, JB, whatever. PIT files are made for repartitioning the emmc for people with superbricks who have corrupted /data and /system partitions. It will decrease the size of your internal memory by a few gb. Don't do it

guitarplayerone said:
Step 1) Read this:
http://forum.xda-developers.com/showthread.php?t=1424997
Step 2) Read it again.
Step 3) Download stock GB rom for ODIN from there. You need to get it down to tar format.
Step 4) Download ODIN
Step 5) Flash the PDA only. Make sure the options are ticked just like this picture
Step 6) ???????
Step 7) Profit (and hit thanks below my post)
You don't really need to flash the CSC as it will change your country code (but could if you want to). You don't really need to flash any MODEM files, as it will possibly change your wireless reception (for better or worse). Do not flash bootloaders or PIT files. You will never need to flash a bootloader with odin, no matter ICS, JB, whatever. PIT files are made for repartitioning the emmc for people with superbricks who have corrupted /data and /system partitions. It will decrease the size of your internal memory by a few gb. Don't do it
Click to expand...
Click to collapse
Ok, a lot of thanks
After install a GB stock rom, I can flash with Odin correspondig CF root (fe. CF Root LC1), and after install CM9 and CM10? Without brick risk?

[Q] [I9001][HELP]Failed Unbrick Via CWM n Odin.

Hallo guy. . .i faced a wierd problem here n realy2 need some of u all help. . .my phone cant start n stuck at kernel logo for a few minute n going to black screen. . .my phone still can go to cwm recovery but there some error appear cant read last activity n there useless even i reflash rom(have try at cm9 n ginger reloaded rom with step that should be made for rom flashing).I also can go to download mod n flash the original firmware via odin but after flashing my phone still stuck at cm9 k kernel logo n that totaly make me confuse until forced me to make this statement here n hope for some help. . .i have try flashing rom via odin at two diffrent computer n the result is negetive. . .for info i using cm9 final with xperia z launcher and k kernel,please guys i realy2 need help before send my phone to shop tommorow n thats was my last option.
Sorry for my bad english.

Reflash a stock ROM see my tutorial (open link below)

mrjraider said:
Reflash a stock ROM see my tutorial (open link below)
Click to expand...
Click to collapse
Thanks i'll try.

mrjraider said:
Reflash a stock ROM see my tutorial (open link below)
Click to expand...
Click to collapse
After all step my phone will reboot but stuck at battery logo n not charging to until i disconect the cable n start the phone manualy but the result is same like before. . .

Try to get in recovery and perform a factory reset

mrjraider said:
Try to get in recovery and perform a factory reset
Click to expand...
Click to collapse
all option in cwm cant solve my problem there have an error message at cwm cant read recovery last log
:crying:

try wiping cache in recovery

syamz84 said:
all option in cwm cant solve my problem there have an error message at cwm cant read recovery last log
:crying:
Click to expand...
Click to collapse
check what version is your CWM, if ver 5, you need to change to ver 6, flash CWM ver 6 with ariesVe.ops using odin 4.43
the other option being a bootloader problem
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43

xsenman said:
check what version is your CWM, if ver 5, you need to change to ver 6, flash CWM ver 6 with ariesVe.ops using odin 4.43
the other option being a bootloader problem
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Click to expand...
Click to collapse
i already using cwm6 and also have try to flash boot.tar via odin but still no luck...i think my problem is with internal sd that need to repartition...can some one gve me suggestion on how to do that?

syamz84 said:
i already using cwm6 and also have try to flash boot.tar via odin but still no luck...i think my problem is with internal sd that need to repartition...can some one gve me suggestion on how to do that?
Click to expand...
Click to collapse
Look in My Guide and Manuals"]My Guides and Manuals[/URL], under SD card section

xsenman said:
Look in My Guide and Manuals"]My Guides and Manuals[/URL], under SD card section
Click to expand...
Click to collapse
still have no luck until today...the only hope is to boot from external sdcard...did u guys have the link for that?:crying:

syamz84 said:
still have no luck until today...the only hope is to boot from external sdcard...did u guys have the link for that?:crying:
Click to expand...
Click to collapse
Look in My Guides and Manuals
SD Card Section
How to Flash a Rom with a broken SD card
How to Flash without SD card
i9001 swap SD card
How to Swap SD cards
Internal SD card Solutions :- Here & Here & Here
How to use Gparted FAQ
How to partition SD card here and here
Increase RAM using Swap File and Swap Partition
Swap Internal and External SDcard of ANY Android phone
Had just uploaded Vold.fstab file for switching SD cards.
You , YES! you are an " Android ".
You Must watch this documentary concerning your privacy Terms & Conditions we agree to
How to say Thank you?If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

[Help!] E: Failed to mount cache - Recovery mode error

Hi
Yesterday, after flashing 4.0.4 ics i updated my galaxy note n7000 to 4.1.2 stock using samsung kies,. after that i inserted sim and rebooted the phone. the phone automatically rebooted into stock recovery and says some errors.
Please help..even after flashing stock firmwares via odin m not able to boot properly. I've tried 2.3.5,4.0.4,4.1.2 firmwares.
here is the pic.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You already had a thread made for the same error few days back. The same question.. did you try flashing a rom using the PIT file? http://d-h.st/FVh (Don't use it if you have 32GB model.).
In your previous thread you said 4.0.4 works fine? whats the status now?

nokiamodeln91 said:
You already had a thread made for the same error few days back. The same question.. did you try flashing a rom using the PIT file? http://d-h.st/FVh (Don't use it if you have 32GB model.).
In your previous thread you said 4.0.4 works fine? whats the status now?
Click to expand...
Click to collapse
yes i created this thread again as i got no reply there.
yeah i tried that with lt6,lt5 and i still get the same error.
yesterday, i flashed ics 4.0.4 on ics i got no error in recovery mode. but after flashing ics 4.0.4 i updated to 4.1.2 via kies and then inserted simcard n rebooted and i get same error..since then i tired 2.3.5,4.0.4,4.1.2 firmware and i get same error..yes i flashed pit file too. stil no luck

So to conclude.. as of now, your phone is booting fine with ICS 4.0.4, no error in recovery as well?

nokiamodeln91 said:
So to conclude.. as of now, your phone is booting fine with ICS 4.0.4, no error in recovery as well?
Click to expand...
Click to collapse
No my note is not booting up in any stock firmware now! no 2.3.5,4.0.4,4.1.2! i cannot boot .

Flash ICS rom again.. boot into recovery and paste a pic. Also the odin screen shot as well after flashing is completed.

nokiamodeln91 said:
Flash ICS rom again.. boot into recovery and paste a pic. Also the odin screen shot as well after flashing is completed.
Click to expand...
Click to collapse
here

did odin flash the rom successfully? I mean the FactoryFS, cache img etc? ... now if you boot into download mode, flash Philz kernel from odin, what happens?

nokiamodeln91 said:
did odin flash the rom successfully? I mean the FactoryFS, cache img etc? ... now if you boot into download mode, flash Philz kernel from odin, what happens?
Click to expand...
Click to collapse
Yes everytime i flash a stock firmware from odin it is successfully flashed! it flashes factoryfs,cache,kernel,etc etc..
you mean flash philz kernel via odin right?

Yeah..

nokiamodeln91 said:
Yeah..
Click to expand...
Click to collapse
if i flash philz kernel via odin i get no access to recovery. i only get download mode

Once you flash philz kernel using odin.. remove the usb cable, remove the battery.. re-seat the battery after 10 seconds.. then press vol up+home+power till you see the GT N7000 screen.. then leave the keys. See if you can get to CWM.

nokiamodeln91 said:
Once you flash philz kernel using odin.. remove the usb cable, remove the battery.. re-seat the battery after 10 seconds.. then press vol up+home+power till you see the GT N7000 screen.. then leave the keys. See if you can get to CWM.
Click to expand...
Click to collapse
Sorry i was busy with my exams. i just tried that and i cannot go into cwm recovery.
I Also flash pitfiles and i still cannot get the phone working

[Q] Unable to boot normally after installing CWM

On my note gt-n7000 device, I have installed cwm using hiemdall. Now I am only able to go to the recovery mode by pressing the vol up + home + power keys, but when I try to boot normally, it stops at the boot screen. Please help me how I can come out of this boot loop. I have tried things like removing cache but they didn't work. I want to know what can be done to boot normal to my android. Or alternatively if I install CM from my sdcard will it boot normally to CM or it still continues to struck with CWM?

Start by telling us how you installed cwm

durga_prasanth said:
On my note gt-n7000 device, I have installed cwm using hiemdall. Now I am only able to go to the recovery mode by pressing the vol up + home + power keys, but when I try to boot normally, it stops at the boot screen. Please help me how I can come out of this boot loop. I have tried things like removing cache but they didn't work. I want to know what can be done to boot normal to my android. Or alternatively if I install CM from my sdcard will it boot normally to CM or it still continues to struck with CWM?
Click to expand...
Click to collapse
Try flashing a custom ROM and see if it boots
Just mount USB storage from recovery and flash the zip file

nokiamodeln91 said:
Start by telling us how you installed cwm
Click to expand...
Click to collapse
I downloaded the cwm for my model (samsung galaxy note gt n7000) and flashed it when the mobile is in download mode using heimdall suite with the following command
heimdall flash --kernel zImage --no-reboot
I don't know whether the no-reboot has caused such error. But when I have gone through the readme.txt for heimdall suite help, it says that the no reboot only prevents it from automatically getting it rebooted but should work fine when we use the power button.

xMorpheus said:
Try flashing a custom ROM and see if it boots
Just mount USB storage from recovery and flash the zip file
Click to expand...
Click to collapse
Since I am unable to boot normally now itself. I am worried if the same things continues even after flashing new ROM.

durga_prasanth said:
Since I am unable to boot normally now itself. I am worried if the same things continues even after flashing new ROM.
Click to expand...
Click to collapse
By flashing a new rom, u basically rewrites existing program and commands of your device, so if not due to wrong flash procedures or bad download, there's no way your phone won't boot.

Jackwu696 said:
By flashing a new rom, u basically rewrites existing program and commands of your device, so if not due to wrong flash procedures or bad download, there's no way your phone won't boot.
Click to expand...
Click to collapse
Okay, but I have one more doubt about how to flash. I am thinking of flashing it with CM 10.2 and hence downloaded the zip. Now can I copy paste the zip file on to my external sd card, put it back to my mobile and flash it or is it better to use adb commands to transfer the file and flash. I just want to know whether the difference in these methods can cause any problem?

durga_prasanth said:
Okay, but I have one more doubt about how to flash. I am thinking of flashing it with CM 10.2 and hence downloaded the zip. Now can I copy paste the zip file on to my external sd card, put it back to my mobile and flash it or is it better to use adb commands to transfer the file and flash. I just want to know whether the difference in these methods can cause any problem?
Click to expand...
Click to collapse
All u need is to copy the zip.file n gapps to your external sd, reboot to recovery, flash r4/r5 kernel, reboot recovery again and follow OP of installing CM 10.2
Sent from my GT-N7000 using XDA Free mobile app

Which file did you download for Cwm...? And what was the phone running before the flash?

nokiamodeln91 said:
Which file did you download for Cwm...? And what was the phone running before the flash?
Click to expand...
Click to collapse
I have downloaded from the clockworkmod website for galaxy note (version 6.0.4.3). Yes the phone is running normally before the flash.

durga_prasanth said:
I have downloaded from the clockworkmod website for galaxy note (version 6.0.4.3). Yes the phone is running normally before the flash.
Click to expand...
Click to collapse
Thats incorrect...You cannot flash the file you got from CWM site on N7000. Now do not flash using CWM.. Flash a stock rom using Odin or download Philz kernel tar file and flash it usiing odin...
I meant which firmware... if it was JB, after flashing Philz XXLTA or XXLSZ kernel try to boot the phone...

nokiamodeln91 said:
Thats incorrect...You cannot flash the file you got from CWM site on N7000. Now do not flash using CWM.. Flash a stock rom using Odin or download Philz kernel tar file and flash it usiing odin...
I meant which firmware... if it was JB, after flashing Philz XXLTA or XXLSZ kernel try to boot the phone...
Click to expand...
Click to collapse
yea I was having JB. So, now since that cwm which I have installed is wrong, now I can only install roms through odin? Can you tell me the versions of odin and cm that are compatible for n7000.

durga_prasanth said:
yea I was having JB. So, now since that cwm which I have installed is wrong, now I can only install roms through odin? Can you tell me the versions of odin and cm that are compatible for n7000.
Click to expand...
Click to collapse
First get the phone booting... Install Philz XXLTA kernel TAR file using odin and check if the phone boots.

nokiamodeln91 said:
First get the phone booting... Install Philz XXLTA kernel TAR file using odin and check if the phone boots.
Click to expand...
Click to collapse
okay I'll try that

nokiamodeln91 said:
First get the phone booting... Install Philz XXLTA kernel TAR file using odin and check if the phone boots.
Click to expand...
Click to collapse
I am not able to find the philz xxlta kernal. Can you please send me the linke to zip/tar file. There are too many files and I just want to be sure that I go with the right one this time. Thank you.

durga_prasanth said:
I am not able to find the philz xxlta kernal. Can you please send me the linke to zip/tar file. There are too many files and I just want to be sure that I go with the right one this time. Thank you.
Click to expand...
Click to collapse
Here you are right to download page http://d-h.st/users/philz_touch/?fld_id=25295#files Credits belong to @Phil3759. Both tar n zip is there
Sent from my GT-N7000 using XDA Free mobile app

Use the TAR not zip.

I have tried installing the above philz cwm 6 kernel using odin. But the installation failed. I am getting the following message after 2 minutes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

durga_prasanth said:
I have tried installing the above philz cwm 6 kernel using odin. But the installation failed. I am getting the following message after 2 minutes.
Click to expand...
Click to collapse
how did you install?

I got that the error is due to samsung kies which is trying to interfere with odin. I unchecked "Run Samsung Kies automatically when a device is connected" option from tools -> preferences in kies and tried. It worked and I got the phone booted normally back to JB now.