I just booted my Galaxy tab into recovery and noticed the following three error lines in red:
E: part(1) DATA Checksum Error
E: part(1) Checksum error
Internal MMC Checksum verify failed
I'm running stock Gingerbread.
My tab works perfectly fine and I think I know why this message appears when I enter recovery. I recently rooted my tab using DooMLoRD's rooting tool. After rooting I removed some bloatware and of course the rooting tool installed some stuff like SU which I know is installed as system app.
I never entered recovery before rooting so I don't know if whatever this means was already there before gaining root access.
However, I think E: part(1) is probably the system partition which was modified when/after rooting (although is not meant to be modified) and that is why the checksum fails, because the system partition -which is not supposed be changed- was actually altered by rooting and removing and adding system apps.
Can any knowledgeable developer/advanced user confirm if my explanation makes sense? I just want to make sure that this is not something I should be worried about.
samy
i have the same problem dose anyone know the answer ?
samycito said:
i have the same problem dose anyone know the answer ?
Click to expand...
Click to collapse
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.
yappoe said:
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.
Click to expand...
Click to collapse
does this thread still available? can i flash any dbdata.rfs? and how to flash the dbdata.rfs?
thanks
yappoe said:
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.
Click to expand...
Click to collapse
I don't have my tab handy at the moment but I think mine is running Android 2.3.4 and it's a P1000n. I'll get more info and post it here.
reflash
Hello everyone! I have a p1000l and with the same issue, even reflashing and getting back to stock defaults (without rooting) gives me these lines when on recovery mode, and some times if i turn off the device it wont turn on, stays on SAMSUNG logo for ages.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any clues how to fix this issue would be very nice!
Im also having some problems with google market, if i update it to google play, it keeps crashing, but i think its related to this error
having the same problem with my with my galaxy tab any idea how to fix this one gor int version of P1000
thanks
you must full erase with jtag and full flash dump with jitag.........and flashing phone with single file.....
Related
Hi, I need to downgrade from stock ICS to stock Gingerbread (european firm). How I can do. What file I have to use?
I have to flash only PDA file, or PDA, CSC and MODEM files? And pit file?
Please do a little help for downgrade
Ex. N7000XXLA6 only have PDA file, and N7000OXALA3 have a lot of files (PDA, Kernel, pit, efs, CSC, MODEM, CODE, etc..)
I'am a little lost
Unkalo said:
Hi, I need to downgrade from stock ICS to stock Gingerbread (european firm). How I can do. What file I have to use?
I have to flash only PDA file, or PDA, CSC and MODEM files? And pit file?
Please do a little help for downgrade
Ex. N7000XXLA6 only have PDA file, and N7000OXALA3 have a lot of files (PDA, Kernel, pit, efs, CSC, MODEM, CODE, etc..)
I'am a little lost
Click to expand...
Click to collapse
Step 1) Read this:
http://forum.xda-developers.com/showthread.php?t=1424997
Step 2) Read it again.
Step 3) Download stock GB rom for ODIN from there. You need to get it down to tar format.
Step 4) Download ODIN
Step 5) Flash the PDA only. Make sure the options are ticked just like this picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6) ???????
Step 7) Profit (and hit thanks below my post)
You don't really need to flash the CSC as it will change your country code (but could if you want to). You don't really need to flash any MODEM files, as it will possibly change your wireless reception (for better or worse). Do not flash bootloaders or PIT files. You will never need to flash a bootloader with odin, no matter ICS, JB, whatever. PIT files are made for repartitioning the emmc for people with superbricks who have corrupted /data and /system partitions. It will decrease the size of your internal memory by a few gb. Don't do it
guitarplayerone said:
Step 1) Read this:
http://forum.xda-developers.com/showthread.php?t=1424997
Step 2) Read it again.
Step 3) Download stock GB rom for ODIN from there. You need to get it down to tar format.
Step 4) Download ODIN
Step 5) Flash the PDA only. Make sure the options are ticked just like this picture
Step 6) ???????
Step 7) Profit (and hit thanks below my post)
You don't really need to flash the CSC as it will change your country code (but could if you want to). You don't really need to flash any MODEM files, as it will possibly change your wireless reception (for better or worse). Do not flash bootloaders or PIT files. You will never need to flash a bootloader with odin, no matter ICS, JB, whatever. PIT files are made for repartitioning the emmc for people with superbricks who have corrupted /data and /system partitions. It will decrease the size of your internal memory by a few gb. Don't do it
Click to expand...
Click to collapse
Ok, a lot of thanks
After install a GB stock rom, I can flash with Odin correspondig CF root (fe. CF Root LC1), and after install CM9 and CM10? Without brick risk?
Okay..So I am Trying to solve this Bull**** Problem...My Gf ..Booted in CWM (Latest Because I flashed CM 10.X in her i9000 16 GB)
and She Formatted everything from CWM because phone was hangs :laugh:...Now the Device is only booting in "Download mode" & after lot's off Searching and flashing many .tar CWM....I got latest *i think its* Semaphore CWM Recovery v5.0.2.7 ....and now I saved Slim ROM in root of SD card But When i Boot in CWM and try to Flash that Zip...it is unable to find that Zip...
Got errors like this
=======================
E: unknown volume for path [/cache/recovery/command]
E:unknown volume for path [/sdcard]
E:Can't mount /sdcard/
and same for data etc
So what's next ?
n00BXperia said:
Okay..So I am Trying to solve this Bull**** Problem...My Gf ..Booted in CWM (Latest Because I flashed CM 10.X in her i9000 16 GB)
and She Formatted everything from CWM because phone was hangs :laugh:...Now the Device is only booting in "Download mode" & after lot's off Searching and flashing many .tar CWM....I got latest *i think its* Semaphore CWM Recovery v5.0.2.7 ....and now I saved Slim ROM in root of SD card But When i Boot in CWM and try to Flash that Zip...it is unable to find that Zip...
Got errors like this
=======================
E: unknown volume for path [/cache/recovery/command]
E:unknown volume for path [/sdcard]
E:Can't mount /sdcard/
and same for data etc
So what's next ?
Click to expand...
Click to collapse
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
strikoo said:
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
Click to expand...
Click to collapse
Wow..Can you give me that Thread's Link ? :highfive:
strikoo said:
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
Click to expand...
Click to collapse
i would flash latest cm nightly first before flashing slim if i was you,or risk losing imei.
Check out slappys recovery kit
http://forum.xda-developers.com/showthread.php?p=38073271
Anyone give me "Flash stock GB with odin using repartition option." ''s Thread Please
Stock ROM List
http://forum.xda-developers.com/showthread.php?t=1102881
If U Need Latest Indian Firmware Just Reply In FB i Will Upload It ....
Thanks Everyone for your Support ..will Test & post results ASAP!
Sent from my Micromax A87. Ninja 4.0 using Tapatalk 2
Check My HOW TO GUIDE
ODIN flash i9000 in google.
Just mark repartition field in Odin before flashing.
You can download latest stock firmware from sammobile.com or samsung-updates.com
mark26 is right, it would be good to flash first CM10.1 than Slim Bean 4.2.2.
BACKUP YOUR EFS PARTITION after you root stock firmware
Thanks EveryOne..I flashed "DarkyROM_10.2_Resurrection.zip" using Odin..Now its booted..after 12 minutes..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now Flashing CM10...Booting
You didn't mark Re-Partition. But I'm glad that it booted.
strikoo said:
You didn't mark Re-Partition. But I'm glad that it booted.
Click to expand...
Click to collapse
Yup...I was thinks for using repartition option if I failed after normal flash.
n00BXperia said:
Yup...I was thinks for using repartition option if I failed after normal flash.
Click to expand...
Click to collapse
Great thinking :good:
Hahahh I am so Intelligent xD ...lol
Sent from my Micromax A87. Ninja 4.0 using Tapatalk 2
Hallo guy. . .i faced a wierd problem here n realy2 need some of u all help. . .my phone cant start n stuck at kernel logo for a few minute n going to black screen. . .my phone still can go to cwm recovery but there some error appear cant read last activity n there useless even i reflash rom(have try at cm9 n ginger reloaded rom with step that should be made for rom flashing).I also can go to download mod n flash the original firmware via odin but after flashing my phone still stuck at cm9 k kernel logo n that totaly make me confuse until forced me to make this statement here n hope for some help. . .i have try flashing rom via odin at two diffrent computer n the result is negetive. . .for info i using cm9 final with xperia z launcher and k kernel,please guys i realy2 need help before send my phone to shop tommorow n thats was my last option.
Sorry for my bad english.
Reflash a stock ROM see my tutorial (open link below)
mrjraider said:
Reflash a stock ROM see my tutorial (open link below)
Click to expand...
Click to collapse
Thanks i'll try.
mrjraider said:
Reflash a stock ROM see my tutorial (open link below)
Click to expand...
Click to collapse
After all step my phone will reboot but stuck at battery logo n not charging to until i disconect the cable n start the phone manualy but the result is same like before. . .
Try to get in recovery and perform a factory reset
mrjraider said:
Try to get in recovery and perform a factory reset
Click to expand...
Click to collapse
all option in cwm cant solve my problem there have an error message at cwm cant read recovery last log
:crying:
try wiping cache in recovery
syamz84 said:
all option in cwm cant solve my problem there have an error message at cwm cant read recovery last log
:crying:
Click to expand...
Click to collapse
check what version is your CWM, if ver 5, you need to change to ver 6, flash CWM ver 6 with ariesVe.ops using odin 4.43
the other option being a bootloader problem
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
xsenman said:
check what version is your CWM, if ver 5, you need to change to ver 6, flash CWM ver 6 with ariesVe.ops using odin 4.43
the other option being a bootloader problem
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Click to expand...
Click to collapse
i already using cwm6 and also have try to flash boot.tar via odin but still no luck...i think my problem is with internal sd that need to repartition...can some one gve me suggestion on how to do that?
syamz84 said:
i already using cwm6 and also have try to flash boot.tar via odin but still no luck...i think my problem is with internal sd that need to repartition...can some one gve me suggestion on how to do that?
Click to expand...
Click to collapse
Look in My Guide and Manuals"]My Guides and Manuals[/URL], under SD card section
xsenman said:
Look in My Guide and Manuals"]My Guides and Manuals[/URL], under SD card section
Click to expand...
Click to collapse
still have no luck until today...the only hope is to boot from external sdcard...did u guys have the link for that?:crying:
syamz84 said:
still have no luck until today...the only hope is to boot from external sdcard...did u guys have the link for that?:crying:
Click to expand...
Click to collapse
Look in My Guides and Manuals
SD Card Section
How to Flash a Rom with a broken SD card
How to Flash without SD card
i9001 swap SD card
How to Swap SD cards
Internal SD card Solutions :- Here & Here & Here
How to use Gparted FAQ
How to partition SD card here and here
Increase RAM using Swap File and Swap Partition
Swap Internal and External SDcard of ANY Android phone
Had just uploaded Vold.fstab file for switching SD cards.
You , YES! you are an " Android ".
You Must watch this documentary concerning your privacy Terms & Conditions we agree to
How to say Thank you?If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Hi
Yesterday, after flashing 4.0.4 ics i updated my galaxy note n7000 to 4.1.2 stock using samsung kies,. after that i inserted sim and rebooted the phone. the phone automatically rebooted into stock recovery and says some errors.
Please help..even after flashing stock firmwares via odin m not able to boot properly. I've tried 2.3.5,4.0.4,4.1.2 firmwares.
here is the pic.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You already had a thread made for the same error few days back. The same question.. did you try flashing a rom using the PIT file? http://d-h.st/FVh (Don't use it if you have 32GB model.).
In your previous thread you said 4.0.4 works fine? whats the status now?
nokiamodeln91 said:
You already had a thread made for the same error few days back. The same question.. did you try flashing a rom using the PIT file? http://d-h.st/FVh (Don't use it if you have 32GB model.).
In your previous thread you said 4.0.4 works fine? whats the status now?
Click to expand...
Click to collapse
yes i created this thread again as i got no reply there.
yeah i tried that with lt6,lt5 and i still get the same error.
yesterday, i flashed ics 4.0.4 on ics i got no error in recovery mode. but after flashing ics 4.0.4 i updated to 4.1.2 via kies and then inserted simcard n rebooted and i get same error..since then i tired 2.3.5,4.0.4,4.1.2 firmware and i get same error..yes i flashed pit file too. stil no luck
So to conclude.. as of now, your phone is booting fine with ICS 4.0.4, no error in recovery as well?
nokiamodeln91 said:
So to conclude.. as of now, your phone is booting fine with ICS 4.0.4, no error in recovery as well?
Click to expand...
Click to collapse
No my note is not booting up in any stock firmware now! no 2.3.5,4.0.4,4.1.2! i cannot boot .
Flash ICS rom again.. boot into recovery and paste a pic. Also the odin screen shot as well after flashing is completed.
nokiamodeln91 said:
Flash ICS rom again.. boot into recovery and paste a pic. Also the odin screen shot as well after flashing is completed.
Click to expand...
Click to collapse
here
did odin flash the rom successfully? I mean the FactoryFS, cache img etc? ... now if you boot into download mode, flash Philz kernel from odin, what happens?
nokiamodeln91 said:
did odin flash the rom successfully? I mean the FactoryFS, cache img etc? ... now if you boot into download mode, flash Philz kernel from odin, what happens?
Click to expand...
Click to collapse
Yes everytime i flash a stock firmware from odin it is successfully flashed! it flashes factoryfs,cache,kernel,etc etc..
you mean flash philz kernel via odin right?
Yeah..
nokiamodeln91 said:
Yeah..
Click to expand...
Click to collapse
if i flash philz kernel via odin i get no access to recovery. i only get download mode
Once you flash philz kernel using odin.. remove the usb cable, remove the battery.. re-seat the battery after 10 seconds.. then press vol up+home+power till you see the GT N7000 screen.. then leave the keys. See if you can get to CWM.
nokiamodeln91 said:
Once you flash philz kernel using odin.. remove the usb cable, remove the battery.. re-seat the battery after 10 seconds.. then press vol up+home+power till you see the GT N7000 screen.. then leave the keys. See if you can get to CWM.
Click to expand...
Click to collapse
Sorry i was busy with my exams. i just tried that and i cannot go into cwm recovery.
I Also flash pitfiles and i still cannot get the phone working
ive tried multiple tar files, recovery. everything short of .pit nothing seems to run thru it all. currently on 4.4.4 nj5 baseband. rooted and flashing has been apart of my regular phone use for the past 3 years and just cant seem to get this right. not sure if its knox or what. any help would be greatly appricated ive tried all the guides on downgrading and nothing seems to work. cant root cant safestrap cant seem to get away from odin sticking on me currently using 3.09 tried 1.85 tried 3.07.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bmr169 said:
ive tried multiple tar files, recovery. everything short of .pit nothing seems to run thru it all. currently on 4.4.4 nj5 baseband. rooted and flashing has been apart of my regular phone use for the past 3 years and just cant seem to get this right. not sure if its knox or what. any help would be greatly appricated ive tried all the guides on downgrading and nothing seems to work. cant root cant safestrap cant seem to get away from odin sticking on me currently using 3.09 tried 1.85 tried 3.07.
View attachment 3077556
Click to expand...
Click to collapse
It's normal that you can't install or flash one firmware that use android 4.3 if you are in android 4.4.4.
- You will have to downgrade till NC2 (android 4.4.4) -> HERE. For install, root and use safestrap in NJ5 -> HERE.
Joku1981 said:
It's normal that you can't install or flash one firmware that use android 4.3 if you are in android 4.4.4.
- You will have to downgrade till NC2 (android 4.4.4) -> HERE. For install, root and use safestrap in NJ5 -> HERE.
Click to expand...
Click to collapse
tried all tutorials even tried kies reset. everytime either with odin or kies it sticks at 0% no idea how to make it pass thru. tried with micro usb and usb cable from note 3.