Database Develop

HELP HELP HELP!!! i9000 flashing boot screen after using odin

I just tried to do a ROM update: http://forum.xda-developers.com/showthread.php?t=940671
And now after the phone reboots I get the flashing boot screen Samsung GT-i9000. I can get back into download mode, but nothing else.
What shoudl i do? This is my first time doing this, go figure....lol

yet another deadly post.
anyway reflash the darkys 9.2 make sure you add 512 pit and tick the re-partition box in odin.
make sure KIES is closed if you have it, even in the icon tray.
let odin do its thing, if the phone starts talking after the flash dont panic, its normal

I just did that and no luck. same thing... I just remembered that I had recovery 3e not 2e. does that matter???? I am getting a flashing loading circle (looks like a sun) in the middle of the screen. Then I unplug the usb, and get a flashing galaxy s boot screen.

that dont matter as darkys rom will give you 2e recovery (voodoo kernel)
load all your files into odin and take a screenshot and post it here so i can double check for you.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://flic.kr/p/9Ewk8t
LOL, this is the best I can do...

omygod said:
http://flic.kr/p/9Ewk8t
Click to expand...
Click to collapse
well all that looks good
try using odin 1.7 its much safer you may get better results.
if that fails we will have to get you back to stock and try again

I did buy this phone used, so it might have not had a stock rom on it? would that matter... I will try odin 1.7 first. Thanks again for the help!!!!

no that does not matter, putting the phone back to stock will in theory make the phone new again. then we can eradicate any errors and start again.
let me know how it goes with odin 1.7

Try to put the original gingerbread rom and follow the video in darky's post. I flashed the same rom some time ago and had no problems. Be careful in Odin what options you check/uncheck and to put the PHONE, PDA and CSC.
Good luck.

Still no luck.....
Same flashing screen....
BTW this is a GTi9000-M

sap7e said:
Try to put the original gingerbread rom and follow the video in darky's post. I flashed the same rom some time ago and had no problems. Be careful in Odin what options you check/uncheck and to put the PHONE, PDA and CSC.
Good luck.
Click to expand...
Click to collapse
original gingerbread rom???? From????
PHONE, PDA and CSC.
???? I never put anything under phone or csc

bell version ?? well you forgot to tell me that earlier didnt ya ? lol
what rom was you on prior to this ?
you ony get phone pda csc when you have a full firmware. darkys 9.2 is compressed into 1 pda .md5 file so dont worry

Model: i9000M
Firmware: 2.2
Baseband: I9000XXJPK
Kernal: 2.6.32.9 shout.lee @ SEP-09 #6
Build: FROYO.UGJL2
LOL, sorry man...

looks stock to me.
as if darkys 9.2 hasnt even touched your phone
before we get you flashing back to stock, download and flash a kernel that supports I9000M - something like CF-Root, speedmod, voodoo..
flash that through ODIN and let me know if its successful, then we can do a wipe and flash something else in recovery

Can you recommend one (Link)? I have no idea what one to use.
------
I propose also versions only the lagfix only, called stock+Voodoo because they are build around the kernel compiled by Samsung
stock+Voodoo-latest XYJS8:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XWJS8.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XYJS5:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XWJS5.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XYJS3:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XWJS3.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XXJPY:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XXJPY.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
stock+Voodoo-latest XXJPX:
Flash with Odin: http://dl.project-voodoo.org/stock+V...9000-XXJPY.tar
Flash with CWM: http://dl.project-voodoo.org/stock+V...ned-update.zip
JPX, JPY, JS3 versions are based on Samsung pre-compiled kernels. This is why those are feature limited (no Voodoo sound, no BLN, no sharpness adjustment).
-----
One of these any good?

I just found this one:
http://forum.xda-developers.com/showthread.php?t=822756.
Version: K13E (12-Apr-2011)
K13 works with official Android 2.2.1 firmwares.
K13 is also compatible with older Android 2.2 firmwares.
Odin versions:
SpeedMod K13E with HZ=500 (Recommended) (QUOTA EXCEEDED FOR DOWNLOADS)
ClockWorkMod versions:
SpeedMod K13E with HZ=250 CWM
SpeedMod K13E with HZ=250 CWM BIGMEM (355MB RAM, no 720P video recording)
SpeedMod K13E with HZ=500 CWM
SpeedMod K13E with HZ=500 CWM BIGMEM (355MB RAM, no 720P video recording)
You can download some of the versions and the source code from XDA forums.
Version: K13D (21-Mar-2011)
Odin versions:
SpeedMod K13D with HZ=500 (Recommended)
Is this one good?
ClockWorkMod versions:
SpeedMod K13D with HZ=250 CWM
SpeedMod K13D with HZ=500 CWM
SpeedMod K13D with HZ=500 CWM BIGMEM (355MB RAM, no 720P video recording)

i dont know lol,
im not familiar with the bell version, i dont wanna give false information and make things worse for you.
is there no CF-root for your version ??

omygod said:
I just found this one:
http://forum.xda-developers.com/showthread.php?t=822756
Click to expand...
Click to collapse
use that one

Ok, I got the older version the newer one isn't allowing any downloads due to quota issues. I have a .tar, now what? remember this is my first time doing this, so please be nice...lol not that u aren't....
---- Actually I think I got it form the bottom of the page now.. 13e 500hz.tar----

Do I put repartition check? and a pit file too? I assume IO put the .tar under pda?

[Q] How to update my i9000m with 2.1?

First guys, sorry if I'm in the wrong section or repeat thread. I just got a Galaxy i9000m from Bell with 2.1 on it and I've passed two nights reading threads and I'm confused. I only have a mac and kies doesn't work for me. I just rooted it and I've download Rom Manager. From now, can I load any roms with Rom manager? I mean can I put a 2.3 rom on internal sd card and load it with RM and it will install? Thanks for any advise, I'll keep searching but i'm so confused and I'm afraid of bricking it.

quick answer... no
you need to be able to update things like bootloaders etc... this usually only happens using kies or odin... I do not have a mac so I cannot answer on how you can update, but i know you cannot do it just on your phone.. a bell mobile store will update it for you if you take it in, it only takes a few mins.

Thanks a lot for your time!!! You def stopped me from bricking it. I was lost
I don't want to bother you but do you know if I can upgrade directly from 2.1 to 2.3? Just to be sure, things I need is the rom, a FW with bootloaders, a kernel, install all this with Odin? I may try your configuration with Juwe's since we have the same phone. thanks again!

I'm not sure about going right from 2.1 to 2.3 but it is maybe worth your while to go to 2.2 and then to 2.3.. it's like a whole extra 5 mins. Just setup an account at Samfirmware.com
Get the i9000UGKC1 downloaded... it is the Bell stock 2.2 flash to that first... and un-root your phone using superoneclick. Quick reading tips to look-up
-how to get 850 modem back (important for bell users)
-flashing modems only
-Superoneclick
-Gingerbread bootloaders
Do alot of reading about gingerbread roms before you upgrade, this ROM is good that I'm on... you just have to make sure you flash a stock JVH with bootloaders or it will mess something up.. not sure what, I just followed the directions.

thanks for the tip!!! So I always have to be unroot to flash a firmware (2.1 to 2.2)?
I'm gonna stick to 2.2 for now. But I have a question...I download the i9000gkc1 FW and the pit 512. But am I supposed to have a PDA, CSC, and PHONE to put in Odin? Cause I only have i9000gkc1_homebinary.tar and if I extract it, it only gave me files like modem.bin, sbl.bin, factoryfs.rfs...
Million thanks!!!

For 2.2 alot of the stock firmwares there is only one file, the PDA. This file contains the modem and csc files... this is not the case with 2.3
So just flash the PIT and the PDA and flash the pda as the .tar file

Heimdall works fine on mac. But really can't you just use a friend's windows PC for 15 minutes to upgrade with kies? It's by far the easiest way to upgrade to KC1 (2.2)
2.3.3 isn't released yet in Canada so it's not available through kies (at least not without a hack)
If you want to flash 2.3.3, I would use the gingerbread starter (flash it trough heimdall, kernel and boot loaders only) and then flash any 2.3.3 ROM through clockworkmod recovery.

Super!! I'm gonna try that. Do you know if I should un-root before installing this 2.2 FW? Do I have to check re-partition? thanks again my friend!!!

thanks!!! I used my friend's pc but I wasn't able to install kies...always get an internet error. I might try with another one but I think I'm gonna use Odin since I heard kies has a lot of bugs. After installing 2.2, I'll def check for your GB starter tip. Thx for your help!!!

You can flash from 2.1 or 2.2 right to 2.3 without a "starter", the phone doesn't care. This is assuming you're flashing with odin or heimdall. If you're flashing a cooked rom from the development section, then it might not hurt...
Having said that, I've flashed 2.1, flashed speedmod and restored a 2.3 cwm backup and it has always worked fine.

he has to make sure he gets the 2.3 bootloaders

Thanks guys for all your help!! I really appreciate! Now I will update 2.1 to 2.2 using Odin but can you check if I'm doing it right or missing something.
So I have the FW i9000GKC1_homebinary.tar that I would place in PDA in Odin. I'll put the the 512 pit in the PIT in Odin. Start the process.
- Should I UN-check the re-partition box?? The only things checked are auto-reboot and F. reset time...?
- Should I unroot it before flashing?
- Do I remove my sim card?

Alot of people suggest removing your ext-sd and SIM (I hardly ever do)but it's not a bad practice
I usually check re-partition with 512 pit and always leave reboot and Freset checked
you do not need to un-root, after flash your phone will be un-rooted and you will need to use superoneclick program to root phone. Just search for it in the forum/google/youtube

dlockhart said:
he has to make sure he gets the 2.3 bootloaders
Click to expand...
Click to collapse
Exactly, and I would also make sure to upgrade boot loaders when upgrading to KC1. The i9000m had issues with some old boot loaders (like no download mode or scdard failures)

I should upgrade bootloaders for 2.2?? I dont really know what bootloaders are exactly for. If I need it before installing 2.2, can you tell me which one do I need? You guys lost me I use Odin3 v.1.7 and I have no bootloader box. I downloaded v.1.82 that has Bootloader option but I think its for another device version, no? Are you guys talking about that or the little square box "phone bootloader update"? I was ready to go but now I'm not so sure....

There are two files sbl.bin (secondary boot loader) and boot.bin (primary boot loader). When you upgrade with KIES the bootloaders get updated too.
You can use heimdall on your Mac to update to KC1 with the boot loaders. But sometimes when you download a ROM the boot loaders aren't included so check that first.
With ODIN 1.7 you should see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes you have to check the boot loader check box. But You must still check that sbl.bin and boot.bin are in your tar file.

thanks!!! So I unrar my .tar file and I only have Sbl.bin, modem.bin, factoryfs.rfs, cache.rfs, param.lfs, zimage. I don't have the boot.bin file you told me. Can I still check the "phone BL udpate" box or it won't work? What should I do at this point?

Hum, probably that there is no need for a primary bootloader update for KC1 then. You can still check it.

CRAP!!! I flash it but it tells me succeed 1/failed 1. Now it boots, shows the galaxy s i9000m logo, then goes to the big S logo and turns has a black screen. And the phone vibrates like evry 30 sec with black screen on. I took a picture of what I did and attached it. Is my phone broken? Can you help me please???

can you boot in download mode? (vol down + home + power)
I think you should flash modem and CSC. Especially since you repartitionned.

[Q] Flashing GingerBread 2.3.3 DXJPE Firmware

Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.

and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?

Roszaidee said:
Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.
Click to expand...
Click to collapse
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!

Ironically, I just flashed mine with the one found on samfirmware.com as I needed to send my unit back to Samsung for RMA on the battery, (battery kept on shutting down for no reason) and it worked just fine. Phone, CSC was all there. They gave it the once over and actually "reformatted" it for me, just to diagnose in case it wasn't a software issue. Lo and behold, it shut down on them right after the "reformatting" and confirmed my issues for them!
Just follow the restocking part of the guide found on Teamovercome.net, but instead of using the standard JQ1.tar file we provided, just use the tar file that came from samfirmware and you should be alright. That's what I did anyway, and it was all fine.
Just remember to do change the CSC from the Korean one to your appropriate market's CSC. The Malaysian CSC was XME.

Roszaidee said:
and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?
Click to expand...
Click to collapse
If i remember correctly, after flashing the firmware, go to recovery mode, it will do some initialisation and once it's done, you do a reboot, you should see the pda & csc..

bongski55 said:
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!
Click to expand...
Click to collapse
tried flashing DXJK2 but it keeps on rebooting at samsung logo.

OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.

cymagnus said:
OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.
Click to expand...
Click to collapse
Thanks alot! It works
Sent from my GT-P1000 using XDA Premium App

Can someone upload the P1000DXJPE rom from samfirmware.com ? Its too slow, impossible to download the firmware from hotfile.com

What link do you prefer?
Sent from my GT-P1000 using XDA Premium App

Roszaidee said:
What link do you prefer?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Which ever which is fast and reliable... such as
..filesonic..sg
..megaupload..com
..mediafire..com
Thanks man.

Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL

Roszaidee said:
Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL
Click to expand...
Click to collapse
Thanks man. The download is fantastic at 450KB/s.
Download completed.

can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pls help me

ameerali19 said:
can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
pls help me
Click to expand...
Click to collapse
thanks friends
i got the file from http://hotfile.com/dl/120112727/77ed932/P1000DXJPC_OLBJPC_DXJPC.rar.html

[Q] E: part(1) DATA Checksum Error

I just booted my Galaxy tab into recovery and noticed the following three error lines in red:
E: part(1) DATA Checksum Error
E: part(1) Checksum error
Internal MMC Checksum verify failed
I'm running stock Gingerbread.
My tab works perfectly fine and I think I know why this message appears when I enter recovery. I recently rooted my tab using DooMLoRD's rooting tool. After rooting I removed some bloatware and of course the rooting tool installed some stuff like SU which I know is installed as system app.
I never entered recovery before rooting so I don't know if whatever this means was already there before gaining root access.
However, I think E: part(1) is probably the system partition which was modified when/after rooting (although is not meant to be modified) and that is why the checksum fails, because the system partition -which is not supposed be changed- was actually altered by rooting and removing and adding system apps.
Can any knowledgeable developer/advanced user confirm if my explanation makes sense? I just want to make sure that this is not something I should be worried about.

samy
i have the same problem dose anyone know the answer ?

samycito said:
i have the same problem dose anyone know the answer ?
Click to expand...
Click to collapse
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.

yappoe said:
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.
Click to expand...
Click to collapse
does this thread still available? can i flash any dbdata.rfs? and how to flash the dbdata.rfs?
thanks

yappoe said:
Could you please tell us more details?
Which gingerbread, is it p1000, or p1000l/m/n?
What did u do to break it?
you prabably need to reflash a rom with pit file and repartition, as well as flashing dbdata.rfs.
Click to expand...
Click to collapse
I don't have my tab handy at the moment but I think mine is running Android 2.3.4 and it's a P1000n. I'll get more info and post it here.

reflash
Hello everyone! I have a p1000l and with the same issue, even reflashing and getting back to stock defaults (without rooting) gives me these lines when on recovery mode, and some times if i turn off the device it wont turn on, stays on SAMSUNG logo for ages.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any clues how to fix this issue would be very nice!
Im also having some problems with google market, if i update it to google play, it keeps crashing, but i think its related to this error

having the same problem with my with my galaxy tab any idea how to fix this one gor int version of P1000
thanks

you must full erase with jtag and full flash dump with jitag.........and flashing phone with single file.....

She Killed i9000 ! Formatted everything :(

Okay..So I am Trying to solve this Bull**** Problem...My Gf ..Booted in CWM (Latest Because I flashed CM 10.X in her i9000 16 GB)
and She Formatted everything from CWM because phone was hangs :laugh:...Now the Device is only booting in "Download mode" & after lot's off Searching and flashing many .tar CWM....I got latest *i think its* Semaphore CWM Recovery v5.0.2.7 ....and now I saved Slim ROM in root of SD card But When i Boot in CWM and try to Flash that Zip...it is unable to find that Zip...
Got errors like this
=======================
E: unknown volume for path [/cache/recovery/command]
E:unknown volume for path [/sdcard]
E:Can't mount /sdcard/
and same for data etc
So what's next ?

n00BXperia said:
Okay..So I am Trying to solve this Bull**** Problem...My Gf ..Booted in CWM (Latest Because I flashed CM 10.X in her i9000 16 GB)
and She Formatted everything from CWM because phone was hangs :laugh:...Now the Device is only booting in "Download mode" & after lot's off Searching and flashing many .tar CWM....I got latest *i think its* Semaphore CWM Recovery v5.0.2.7 ....and now I saved Slim ROM in root of SD card But When i Boot in CWM and try to Flash that Zip...it is unable to find that Zip...
Got errors like this
=======================
E: unknown volume for path [/cache/recovery/command]
E:unknown volume for path [/sdcard]
E:Can't mount /sdcard/
and same for data etc
So what's next ?
Click to expand...
Click to collapse
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim

strikoo said:
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
Click to expand...
Click to collapse
Wow..Can you give me that Thread's Link ? :highfive:

strikoo said:
Flash stock GB with odin using repartition option.
Flash CWM
Install Slim
Click to expand...
Click to collapse
i would flash latest cm nightly first before flashing slim if i was you,or risk losing imei.
Check out slappys recovery kit
http://forum.xda-developers.com/showthread.php?p=38073271

Anyone give me "Flash stock GB with odin using repartition option." ''s Thread Please

Stock ROM List
http://forum.xda-developers.com/showthread.php?t=1102881
If U Need Latest Indian Firmware Just Reply In FB i Will Upload It ....

Thanks Everyone for your Support ..will Test & post results ASAP!
Sent from my Micromax A87. Ninja 4.0 using Tapatalk 2

Check My HOW TO GUIDE

ODIN flash i9000 in google.
Just mark repartition field in Odin before flashing.
You can download latest stock firmware from sammobile.com or samsung-updates.com
mark26 is right, it would be good to flash first CM10.1 than Slim Bean 4.2.2.
BACKUP YOUR EFS PARTITION after you root stock firmware

Thanks EveryOne..I flashed "DarkyROM_10.2_Resurrection.zip" using Odin..Now its booted..after 12 minutes..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now Flashing CM10...Booting

You didn't mark Re-Partition. But I'm glad that it booted.

strikoo said:
You didn't mark Re-Partition. But I'm glad that it booted.
Click to expand...
Click to collapse
Yup...I was thinks for using repartition option if I failed after normal flash.

n00BXperia said:
Yup...I was thinks for using repartition option if I failed after normal flash.
Click to expand...
Click to collapse
Great thinking :good:

Hahahh I am so Intelligent xD ...lol
Sent from my Micromax A87. Ninja 4.0 using Tapatalk 2