Database Develop

[Q] zv9 and cwm recovery

So after having the broken out zv8 ROM I forgot to rename the otacerts.zip so needless to say I went through the lgnpst method of going back to stock zv8. had to make a call before I rooted and when I ended the call the phone rebooted itself and installed the update. :-( well now I have root but no cwm. tried All other previous methods and no go. anyone have cwm on zv9? Any info or links on how to get it? Please help! I miss my overclocked kernel and beats audio and ICS responsiveness. much love to all the droid developers and contributors

I used the AIO from the 'Easy V8 all in one' thread in the development section. See my remarks there. Bottom line i ran the AIO option for root and cwm even though I was already rooted. Didn't affect root and put cwm back on my device.
Sent from my VS910 4G using xda premium

Use the same method used to keep root from v7 to v8, create the local.prop file then try the v8 aio.

thank you guys! flashed the blitzkrieg kernel and it worked also, didnt have to create any local.prop file tho. now waiting for our dev. mtmichaelson to release a custom zv9 ROM so i can finally have a decent phone again

This is what I keep getting even though I am rooted.
Rooting the LG Revolution
Tool Built by mtmichaelson
Exploit Built by the Revolutionary Team
Rooting
Press any key to continue . . .
* daemon not running. starting it now *
* daemon started successfully *
Device found
Pushing Zergrush
434 KB/s (0 bytes in 22281.000s)
939 KB/s (0 bytes in 5345280.005s)
Running Zergrush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00017118
[*] Sending 149 zerglings ...
[*] Trying a new path ...
[*] Sending 149 zerglings ...
[*] Trying a new path ...
[*] Sending 149 zerglings ...
[*] Trying a new path ...
[*] Sending 149 zerglings ...
[*] Trying a new path ...
[*] Sending 149 zerglings ...
[*] Trying a new path ...
[-] Zerglings did not leave interesting stuff
Removing Trash and Installing Root Files
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
failed to copy 'Files\su' to '/system/tmp/su': No such file or directory
failed to copy 'Files\busybox' to '/system/tmp/busybox': No such file or directo
ry
failed to copy 'Files\Superuser.apk' to '/system/tmp/Superuser.apk': No such fil
e or directory
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
Removing Trash
/data/local/tmp/sh: permission denied
Installing CWM Recovery
/data/local/tmp/sh: permission denied
/data/local/tmp/sh: permission denied
Finished Rooting!!!
Press any key to continue . . .
I've spent 2 full days, from about 10 am to after midnight, trying to get CWM back on my phone. Glad to hear the it works with V9, just wish I could get it to work on mine. I've given up on it for a little while. I found a way to install beats without it and don't need it for supercharger. I even copied and pasted the thunderbolt files... not sure if it did anything.

That's one way around it. have you tried the local.prop trick? You have to create the file, reboot, check to see if the file stuck, then use the v8 aio. It took a few tries to get cwm on my wifes phone and that was after a few fact. Resets.
Sent from my VS910 4G using XDA

The local.prop file is in the data folder. I went back to v7 and added it before upgrading to v8. Then the upgrade to v9. Even tried to add the file after the upgrade.
Sent from my VS910 4G using XDA

Jeff's method is what worked for mine. didn't need the local.prop. used lgnpst to flash back to v7did the update then used djrbliss's esteem root and the aio from Jeff's post. no need for the local.prop on mine for some reason. good luck all! I hope mtmichaelson offers up a broken out zv 9 soon. again thank you to all the devs out there who make our droids open source. the way they should be

use the LG_Esteem_Root_V2_windows. thats what i used to get cwm to stay.

Somebody please tell me if I need to downgrade to zv8 in order to have cwm because I've tried cubes adb method and the revotoolkit and both have failed. Please Help ME!!

Makaveli315 said:
Somebody please tell me if I need to downgrade to zv8 in order to have cwm because I've tried cubes adb method and the revotoolkit and both have failed. Please Help ME!!
Click to expand...
Click to collapse
look for jeffs post in the easy v8 AIO thread!

Check this out, should work.
http://forum.xda-developers.com/showthread.php?t=1663364
Sent from my VS910 4G using xda premium

[Q] Black Rose S-Off

I rooted my phone with HTC Dev Method...It am currently running Viper Vivo 1.0.0...I want to install ARHD...It requires Blackrose HBOOT S-OFF...
How Can i Get Blackrose...Currently My hboot is 2.02 ....Can i directly install ARHD???

shiromau said:
I rooted my phone with HTC Dev Method...It am currently running Viper Vivo 1.0.0...I want to install ARHD...It requires Blackrose HBOOT S-OFF...
How Can i Get Blackrose...Currently My hboot is 2.02 ....Can i directly install ARHD???
Click to expand...
Click to collapse
A wrong place for crying...
However, BlackRose, here you go:
http://forum.xda-developers.com/showthread.php?t=1509236

Blackrose install failure
I fail in installing Blackrose. This is what I did:
- root my phone using the newbee guide on this forum
- downgrading to hboot 1.13 using the S-Off guide on this forum
- S-Off using revolutionary
My phone is now S-Off, hboot 6.13.1002, revolutionary CWM v4.0.1.4
With USB debugging on, phone connected, I am running BlackRose_IS.exe with the following result:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
* Waiting for device... *
* Installing BlackRose *
2254 KB/s (1116332 bytes in 0.483s)
1732 KB/s (1048576 bytes in 0.591s)
234 KB/s (2402 bytes in 0.010s)
[: permission denied
[: permission denied
[: permission denied
dd: can't open '/dev/block/mmcblk0p18': Permission denied
md5sum: can't open '/data/local/tmp/blackrose/hboot_backup.img': No such file or
directory
md5sum: can't open '/dev/block/mmcblk0p18': Permission denied
[: permission denied
[: permission denied
[: permission denied
dd: can't open '/dev/block/mmcblk0p18': Permission denied
md5sum: can't open '/dev/block/mmcblk0p18': Permission denied
[: permission denied
mkdir: can't create directory '/cache/recovery': Permission denied
/data/local/tmp/blackrose/install.sh: cannot create /cache/recovery/command: per
mission denied
0 KB/s (1 bytes in 0.010s)
Now I am lost... (clearly newbee...).
Can you please point me in how to move on?Thanks!

neopap said:
I fail in installing Blackrose. This is what I did:
- root my phone using the newbee guide on this forum
- downgrading to hboot 1.13 using the S-Off guide on this forum
- S-Off using revolutionary
My phone is now S-Off, hboot 6.13.1002, revolutionary CWM v4.0.1.4
With USB debugging on, phone connected, I am running BlackRose_IS.exe with the following result:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
* Waiting for device... *
* Installing BlackRose *
2254 KB/s (1116332 bytes in 0.483s)
1732 KB/s (1048576 bytes in 0.591s)
234 KB/s (2402 bytes in 0.010s)
[: permission denied
[: permission denied
[: permission denied
dd: can't open '/dev/block/mmcblk0p18': Permission denied
md5sum: can't open '/data/local/tmp/blackrose/hboot_backup.img': No such file or
directory
md5sum: can't open '/dev/block/mmcblk0p18': Permission denied
[: permission denied
[: permission denied
[: permission denied
dd: can't open '/dev/block/mmcblk0p18': Permission denied
md5sum: can't open '/dev/block/mmcblk0p18': Permission denied
[: permission denied
mkdir: can't create directory '/cache/recovery': Permission denied
/data/local/tmp/blackrose/install.sh: cannot create /cache/recovery/command: per
mission denied
0 KB/s (1 bytes in 0.010s)
Now I am lost... (clearly newbee...).
Can you please point me in how to move on?Thanks!
Click to expand...
Click to collapse
I assume you're still on stock rom, to get BlackRose installer going you need a rom with unsecured boot.img. Try to flash CM7 and then to run installer.

Thanks nlooooo!
nlooooo said:
I assume you're still on stock rom, to get BlackRose installer going you need a rom with unsecured boot.img. Try to flash CM7 and then to run installer.
Click to expand...
Click to collapse
You are right... as I said... clearly newbee.
Thanks for the superfast reply!!!:good:

how to enable init.d support?

im using stock 4.1.1 (rooted), i know batakang & joker support init.d but i prefer stock & want to mod it a little.
script manager does make few script's work, but cannot supercharge n stuff like that without init.d
i tried using the init.d enabler script but doesn't work & also pimp my rom uses the init.d enabler script so that doesn't work either.
so any1 have any ideas on how to enable init.d support for stock 4.1.1

I wrote a little guide and the required files in a .zip hosted on my Dropbox.
If you want an auto-mated Windows batch file to install it AND adbd insecured...
Use the Ext4 bat file.

im a little noob to do it manually so i tried the bat file method, which failed & here's the error,
Make sure your phone is NOT set to USB Mass Storage.
Make sure USB Debugging is enabled.
Make sure you are ROOTED before doing this.
Press any key to continue.
Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
4548 KB/s (145332 bytes in 0.031s)
23 KB/s (370 bytes in 0.015s)
3896 KB/s (1867568 bytes in 0.468s)
0 KB/s (37 bytes in 1.000s)
0 KB/s (138 bytes in 1.000s)
cp: /system/xbin/busybox: No such file or directory
rm failed for /system/xbin/run-parts, No such file or directory
link failed No such file or directory
Unable to chmod /system/xbin/busybox: No such file or directory
Unable to chmod /system/xbin/run-parts: No such file or directory
Rebooting. When it shows 'remount sucessful' it means it worked.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
my Atrix HD is rooted, made sure usb debugging is on, also tried installing busybox to system/xbin but in stock JB it only installs in system/bin so tried changing the lines with xbin to bin in "InstallerForExt4Devices.bat" but still does not work.
thanks for the help but i guess this phone is not for noobs

coldfear00 said:
im a little noob to do it manually so i tried the bat file method, which failed & here's the error,
Make sure your phone is NOT set to USB Mass Storage.
Make sure USB Debugging is enabled.
Make sure you are ROOTED before doing this.
Press any key to continue.
Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
4548 KB/s (145332 bytes in 0.031s)
23 KB/s (370 bytes in 0.015s)
3896 KB/s (1867568 bytes in 0.468s)
0 KB/s (37 bytes in 1.000s)
0 KB/s (138 bytes in 1.000s)
cp: /system/xbin/busybox: No such file or directory
rm failed for /system/xbin/run-parts, No such file or directory
link failed No such file or directory
Unable to chmod /system/xbin/busybox: No such file or directory
Unable to chmod /system/xbin/run-parts: No such file or directory
Rebooting. When it shows 'remount sucessful' it means it worked.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
my Atrix HD is rooted, made sure usb debugging is on, also tried installing busybox to system/xbin but in stock JB it only installs in system/bin so tried changing the lines with xbin to bin in "InstallerForExt4Devices.bat" but still does not work.
thanks for the help but i guess this phone is not for noobs
Click to expand...
Click to collapse
Try the busy box installer from play store.
Sent from my MotoAHD Maxx

Youngunn2008 said:
Try the busy box installer from play store.
Sent from my MotoAHD Maxx
Click to expand...
Click to collapse
i have busybox pro from Gplay also enabled adbd insecure but still no use

You need the "normal install" not the smart install
Sent from my phone.

Markyzz said:
You need the "normal install" not the smart install
Sent from my phone.
Click to expand...
Click to collapse
i always do normal install of busybox.

coldfear00 said:
i always do normal install of busybox.
Click to expand...
Click to collapse
With busy box app you can select to install it to xbin as well.
Sent from my MotoAHD Maxx

Youngunn2008 said:
With busy box app you can select to install it to xbin as well.
Sent from my MotoAHD Maxx
Click to expand...
Click to collapse
Yup. IIRC I just manually copied the files into xbin and init.d worked after that.
Sent from my phone.

Youngunn2008 said:
With busy box app you can select to install it to xbin as well.
Sent from my MotoAHD Maxx
Click to expand...
Click to collapse
when i select system/xbin installation fails, only installs in system/bin
Markyzz said:
Yup. IIRC I just manually copied the files into xbin and init.d worked after that.
Sent from my phone.
Click to expand...
Click to collapse
good for you bro, i also tried the same but no use.

im giving up on this phone, going for nexus 4

accidentally double post, sorry

[SOLVED]

SOLVED, cant find the delete button
I am not a big expert with software and stuff, but I try rooting my lg optimus 4x hd and all it says:
DON'T TOUCH THE DEVICE OR UNPLUG WHILE ROOTING!
PUSH FILES
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
failed to copy 'su' to '/data/local/su': Permission denied
failed to copy 'Superuser.apk' to '/data/local/Superuser.apk': Permission denied
Unable to chmod /data/local/su: No such file or directory
Unable to chmod /data/local/Superuser.apk: No such file or directory
failed on '/data/local/tmp' - Permission denied
link failed File exists
mount: Operation not permitted
mount: Operation not permitted
/system/bin/sh: can't create /system/app/Superuser.apk: Read-only file system
/system/bin/sh: can't create /system/xbin/su: Read-only file system
Unable to chown /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/app/Superuser.apk: No such file or directory
rm failed for /data/local/tmp, Permission denied
failed on '/data/local/tmp.bak' - No such file or directory
REBOOT
Can someone help me?
btw, I tried the root and the root-nobusybox

[Q] [Root 4.4.X] Pie for Motorola devices - Linux - proly mac 2 step ?s

So in the [Root 4.4.X] Pie for Motorola devices thread (thanks to jcase) on page 32 (thanks to dubyajaysmith):
http://forum.xda-developers.com/mot...ot-4-4-x-pie-motorola-devices-t2771623/page32
found this gem for Mac users. But I'm an old noob (ran CM on GalaxyS forever using Windows tools) to using adb on Mac. Tried to follow instructions but apparently not getting it right. I can get root (partial) but it doesn't survive "soft reboot" (which I'm not sure which of several methods is correct).
TiBuPro seems to work (sorta). Root Checker Basic says root access.
return from Terminal had a couple fails?:
xx-mbp:~ x$ chmod 700 mxr.sh && ./mxr.sh
5083 KB/s (1538138 bytes in 0.295s)
99 KB/s (192 bytes in 0.001s)
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
pie by jcase
want to buy me pie? paypal-> [email protected]
Root not retained after “soft reboot” (holding power down for 5 sec - is this correct “soft reboot”?… or reboot from TiBuPro? (nope)… or?)
So did adb ./mxr.sh - returned:
4345 KB/s (1538138 bytes in 0.345s)
28 KB/s (192 bytes in 0.006s)
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
mkdir failed for /data/local/atvc/dalvik-cache, File exists
pie by jcase
want to buy me pie? paypal-> [email protected]
After TBP reboot still lost root, adb ./mxr.sh or chmod 700 mxr.sh && ./mxr.sh
again:
platform-tools d$ chmod 700 mxr.sh && ./mxr.sh
4337 KB/s (1538138 bytes in 0.346s)
33 KB/s (192 bytes in 0.005s)
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
mkdir failed for /data/local/atvc/dalvik-cache, File exists
pie by jcase
want to buy me pie? paypal-> [email protected]
so again, not doing something right…
Tried installing ChainFire SU & Xposed Framework, tripping at the Xposed Framework Installer's "Install/Update" Framework (using "classical"), does it's thing, cancel "reboot now" and use "soft reboot" (perhaps this isn't the correct "soft reboot"?) which after reboot leaves root disabled again.
So please forgive wall of text, suspect these fails:
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
mkdir failed for /data/local/atvc/dalvik-cache, File exists
are the "root" (lol, pun) of trouble...
Can anyone help the helpless here? TIA