You will have to ignore my lack of knowledge on this, still don't play around with phones much , but anyway.
Recently iv been using a custom Rom of 4.4 Kitkat cyanogen mod Unofficial.
It was working fine, nothing wrong.
If found my phone this morning stuck in a bootloop, so i threw it into recovery and had a look, iv now apparently go 0mb of storage, unable to mount any system, data etc.
Iv tried taking it back to stock with Odin, but no joy as it cant seem access it.
Im unable to flash a new ROM from extSD, it just fails.
Any suggestions, and if u want more info just say
Need more information like where does Odin fail .
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305ZHALI7_I9305TGYALI6_I9305ZHALI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Is a copy from the odin text output
Damaged Nand you need a new motherboard .
Related
HI there
I had a bootloop issue with my sg3. I am unable to get into recovery mode so All I am able to do is get into Download mode ( Odin)
Tried to flash a stock firmware and this is what happens
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried this is on multiple computers and same issue. After a bit of googling I gather its to do with my partition being read only or something but I am too much of a noob to try and go play about with that stuff
can some one please help me and direct me .
I just want the phone to work again, Its outside warranty and i cant afford to buy a new one
Try getting different firmware and try again...
And, please, next time post in correct forum
Sent from my GT-I9300 using xda app-developers app
I've come across various other threads concerning this topic with other devices, but none are exactly like my issue.
I rooted originally with Odin and CF autoroot with no issues. Now me being the noob that I am, I un-rooted with Kies to check for any updates. The process went fine, however my device status still says "custom" and I'm unable to re-root using the same method that I did before. I get a "fail" in Odin after the cache.img process and have to remove the battery to reboot device.
Has anyone had this issue or am I the only idiot to unroot this beast of a phone?
Best bet. Odin back to stock and then reroot and forget about updates.
BAD ASS NOTE 4 + BAD ASS GEAR S
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
I'd try a different version of Odin.
Razorfengraul said:
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
Click to expand...
Click to collapse
As said diff version or bad cf autoroot download. It can be many things. Try a fresh download of everything. Also when u Odin back to stock it went fine so it is something after. Bad download
BAD ASS NOTE 4 + BAD ASS GEAR S
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Kenannp said:
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Try other USB port. Let me known if it works.
Force said:
Try other USB port. Let me known if it works.
Click to expand...
Click to collapse
did try... even tried on other pc but still same problem... went to buddy to repair it in service shop... he said that something is wrong with usb on the phone... so i left it there to get fixed. thx tho
Recently I installed Clockwork Mod on my sisters Samasung Galaxy I8190N and attempted to flash lollipop on it. Much to my disappointment somewhere in the process I failed. Now when the phone boots I see the lollipop loading animation, but it goes no further during the boot. I can no longer access the Clockwork Mod recovery with up+power+home button. But can still access the download mode. So I tried to reinstall the 4.1.2 using odin, however with odin I get the following error when trying to flash using the PDA/AP:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone (in download mode) it says Custom Modem Binary installed.
Any help in getting my sisters phone back to how it was before she gave it to me (default 4.1.2) would be greatly appreciated!
Edit: I realise after posting that this would of been better in the troubleshooting forum, apologies for that.
Factory reset or flash original firmware from sammobile
I was having issues with the WiFi on my phone so I made backups to the SD card, removed it and did a factory reset on the phone. I'm not sure what it was running at the time, but not lolipop. It now boots to AT&T logo and heats up until I pull the battery out (I've waited upwards of 30 mins). I tried flashing stock and 0F3 roms with odin and I get the error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone it says "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
I've tried flashing with PIT, tried flashing the boot loader, G870AUCU1ANE4_Full_Odin, and G870A_OC5_Bootloader, to no avail. I also downloaded Samsung Kies 3 and tried to do Firmware upgrade and initialization, which also didn't work. It comes up to Firmeware emergency recovery and asks for a recovery code (which I don't have). I've also tried from recovery mode to factory data reset and also tried to flash the roms from external SD. Is there anything else I can try or something I am missing that can get this working? Any help would be greatly appreciated.