Hi, I have a ATT HTC One I got yesterday. Was rooted, had an old ROM on it, unlocked, s-off, hboot 1.44. I tried to flash a PGe rom on it and it became stuck in TWRP. I can get adb, but sideloading a rom doesn't work. It says it flashes but will not boot. Can get into the bootloader, but can't get fastboot. Really frustrated, any help would be much appreciated. Thanks!
i was also got same problem with you
and to boot to TWRP i use CMD : Fastboot boot recovery.img
and then i can successfully go to TWRP settings
fndfendy said:
i was also got same problem with you
and to boot to TWRP i use CMD : Fastboot boot recovery.img
and then i can successfully go to TWRP settings
Click to expand...
Click to collapse
I can get into TWRP no problem. And I can get adb there, but can't flash a rom, always fails. Anyone else have any ideas?
schufly said:
I can get into TWRP no problem. And I can get adb there, but can't flash a rom, always fails. Anyone else have any ideas?
Click to expand...
Click to collapse
have you tried pushing rom instead of sideloading it??
got to recovery and try this
adb push rom.zip /data/media/0/
or
adb push rom.zip
Harish_Kumar said:
have you tried pushing rom instead of sideloading it??
got to recovery and try this
adb push rom.zip /data/media/0/
or
adb push rom.zip
Click to expand...
Click to collapse
I will try that. I am also using a windows 8 laptop, which may be part of my issue in getting the phone recognized in fastboot. I am trying to locate a windows 7 computer to use. I am also downloading the correct Guru file for it, but can't try it till I get home tonight because I can't install HTC drivers on my work computer.
I have been rooting phones since I had my HTC Hero and never had this much trouble or bricked a phone, let alone had to leave one down overnight. I am humbled......lol
I was also considering trying to load a nandroid backup. IF I do, and I can push it, what location does it need to go to??
schufly said:
I was also considering trying to load a nandroid backup. IF I do, and I can push it, what location does it need to go to??
Click to expand...
Click to collapse
what TWRP version are you using, and what are you installing?
If you're flashing a 4.4 ROM, then you will need TWRP 2.6.3.3, otherwise it will bootloop.
and for GPE 4.4 you also need S-Off.
nkk71 said:
what TWRP version are you using, and what are you installing?
If you're flashing a 4.4 ROM, then you will need TWRP 2.6.3.3, otherwise it will bootloop.
and for GPE 4.4 you also need S-Off.
Click to expand...
Click to collapse
Was about to say same, except if it's a 4.4 ROM it will fail install, not bootloop...........TWRP 2.6.3.4 is available now also.
CaelanT said:
Was about to say same, except if it's a 4.4 ROM it will fail install, not bootloop...........TWRP 2.6.3.4 is available now also.
Click to expand...
Click to collapse
havent had a chance to check, but is .4 stable? iirc it didnt work for someone for 4.4 but .3 did.
nkk71 said:
havent had a chance to check, but is .4 stable? iirc it didnt work for someone for 4.4 but .3 did.
Click to expand...
Click to collapse
I flashed Insertcoin with 2.6.3.3, but haven't tried 2.6.3.4 with 4.4 as it was released after. Using 2.6.3.4 on my phone now with no other issues though. I know to never assume, but I did assume that later revisions than 2.6.3.3 should also work. Maybe someone can clarify.
<edit> Here ---> http://forum.xda-developers.com/showpost.php?p=48364016&postcount=1107
CaelanT said:
I flashed Insertcoin with 2.6.3.3, but haven't tried 2.6.3.4 with 4.4 as it was released after. Using 2.6.3.4 on my phone now with no other issues though. I know to never assume, but I did assume that later revisions than 2.6.3.3 should also work. Maybe someone can clarify.
<edit> Here ---> http://forum.xda-developers.com/showpost.php?p=48364016&postcount=1107
Click to expand...
Click to collapse
Thanks, downloading
---------- Post added at 06:23 PM ---------- Previous post was at 06:10 PM ----------
CaelanT said:
I flashed Insertcoin with 2.6.3.3, but haven't tried 2.6.3.4 with 4.4 as it was released after. Using 2.6.3.4 on my phone now with no other issues though. I know to never assume, but I did assume that later revisions than 2.6.3.3 should also work. Maybe someone can clarify.
<edit> Here ---> http://forum.xda-developers.com/showpost.php?p=48364016&postcount=1107
Click to expand...
Click to collapse
so i checked, but it doesn't say why it's under m7ul now. any reason it wouldnt work with an m7u?
I'm stuck with TWRP 2.6.3.0 unfortunately.....
Solved my problem. Used a Windows Vista computer, and a different cable, was able to get fastboot to work and used a RUU to get back to stock. Got rid of TWRP and put on the newwest CWM recovery and a new rom. Thanks to all that helped!
Related
My Sprint HTC One was working fine until i flashed the latest AOKP build and a kernel that must not have worked. The phone started rebooting and wouldn't stay in the system for longer than a minute. I decided to wipe everything, even internal storage so that I could adb push another rom onto it and install. I did this before but for some reason this time it didn't. My computer recognized when I'm in adb or fastboot but when I try to push a rom from adb or flash a rom from fastboot it says it can't mount data, cache, system, blah blah blah... I know I'm a noob at this rooting stuff with HTC but please could someone help me? I also tried RUU but my image version was higher then the RUU image version so that wasn't an option as my image version is 1.31.651.2 and the latest image version for RUU is 1.29.651.10. I don't have s-off and I am not able to obtain it because I have no OS and it can't mount. Can someone PLEASE HELP ME?
You can get into twrp..... try re installing the htc drivers or generic Android drivers. perhaps maybe installing the drivers on a different pc and or using a live ubuntuu disk and pushing the files over to twrp.
Robisgnarly said:
You can get into twrp..... try re installing the htc drivers or generic Android drivers. perhaps maybe installing the drivers on a different pc and or using a live ubuntuu disk and pushing the files over to twrp.
Click to expand...
Click to collapse
i dont have a problem running adb or fastboot. all my drivers are installed. its just that when i try to push them or flash anything i get errors because nothing is mounted so it has no place to store the files i guess?
nwajr5 said:
My Sprint HTC One was working fine until i flashed the latest AOKP build and a kernel that must not have worked. The phone started rebooting and wouldn't stay in the system for longer than a minute. I decided to wipe everything, even internal storage so that I could adb push another rom onto it and install. I did this before but for some reason this time it didn't. My computer recognized when I'm in adb or fastboot but when I try to push a rom from adb or flash a rom from fastboot it says it can't mount data, cache, system, blah blah blah... I know I'm a noob at this rooting stuff with HTC but please could someone help me? I also tried RUU but my image version was higher then the RUU image version so that wasn't an option as my image version is 1.31.651.2 and the latest image version for RUU is 1.29.651.10. I don't have s-off and I am not able to obtain it because I have no OS and it can't mount. Can someone PLEASE HELP ME?
Click to expand...
Click to collapse
Your internal memory is corrupt. Flash a different version of TWRP. It should fix the errors. You will then be able to mount everything.
indy1811 said:
Your internal memory is corrupt. Flash a different version of TWRP. It should fix the errors. You will then be able to mount everything.
Click to expand...
Click to collapse
what version of twrp should i flash?
nwajr5 said:
what version of twrp should i flash?
Click to expand...
Click to collapse
the newest version?
Robisgnarly said:
the newest version?
Click to expand...
Click to collapse
i already had the latest on it
This will get you fixed up
http://forum.xda-developers.com/showthread.php?t=2461414
bigdaddy619 said:
This will get you fixed up
http://forum.xda-developers.com/showthread.php?t=2461414
Click to expand...
Click to collapse
thanks ill try it and let you know
adb reboot recovery.
In TWRP go to Advanced > ADB Sideload
abd sideload rom.zip
Last resort would be the flash the stock RUU and then reroot. I did that and fixed everything
Sent from my HTCONE using Tapatalk
aman1127 said:
Last resort would be the flash the stock RUU and then reroot. I did that and fixed everything
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
easier done than said. i am on image version of 1.31 and the ruu is 1.29 so there is no way. even when i tried this http://forum.xda-developers.com/showthread.php?t=2390821 the ruu gave me an error
bigdaddy619 said:
This will get you fixed up
http://forum.xda-developers.com/showthread.php?t=2461414
Click to expand...
Click to collapse
oh i forgot to mention im on hboot 1.55 because my friend that tried to help me updated it like a dummy
nwajr5 said:
what version of twrp should i flash?
Click to expand...
Click to collapse
Any version other than the one you're on. I downgraded from 2.6.3.0 to 2.5 and it fixed the problem for me...
ok so I have been stock and unlocked and rooted with s-on. Decided today to flash my first Custom Rom. I have always been apprehensive
as my past devices have just seemed a lot easier to flash custom roms on and I was worried. I tried to flash Ordroid and the boot.img but was
stuck on the splash screen and just going to recovery constantly. I tried comand for wiping dalvik cache. It did nothing for me, don't know where I went wrong so far. Anyway I managed to wipe my internal storage when I was panicking. So now Im pretty much stuck in the same place I just cant flash anything because I have wiped off ordroid and my back up, or push anything to my phone. I was using a toolkit as well. Can anyone help me? Don't know why it would not boot in the first place I did a full wipe.
I know search blah blah blah but I dont want to make it any worse without some advice as to what I should be doing.
Any help appreciated thanks
-josh- said:
ok so I have been stock and unlocked and rooted with s-on. Decided today to flash my first Custom Rom. I have always been apprehensive
as my past devices have just seemed a lot easier to flash custom roms on and I was worried. I tried to flash Ordroid and the boot.img but was
stuck on the splash screen and just going to recovery constantly. I tried comand for wiping dalvik cache. It did nothing for me, don't know where I went wrong so far. Anyway I managed to wipe my internal storage when I was panicking. So now Im pretty much stuck in the same place I just cant flash anything because I have wiped off ordroid and my back up, or push anything to my phone. I was using a toolkit as well. Can anyone help me? Don't know why it would not boot in the first place I did a full wipe.
I know search blah blah blah but I dont want to make it any worse without some advice as to what I should be doing.
Any help appreciated thanks
Click to expand...
Click to collapse
Seem your using a very old guide .. we don't flash boot.img for over 8 months.
First update your recovery to TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
Next go into TWRP /Advanced / sideload
now on the PC put your rom in the same location as adb and fastboot
open command window and type
adb sideload <name of rom>.zip
at the end of sideload the rom install will begin
clsA said:
Seem your using a very old guide .. we don't flash boot.img for over 8 months.
First update your recovery to TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
Next go into TWRP /Advanced / sideload
now on the PC put your rom in the same location as adb and fastboot
open command window and type
adb sideload <name of rom>.zip
at the end of sideload the rom install will begin
Click to expand...
Click to collapse
Ok so I managed to sideload the ordroid i was previously trying to install but same problems so Im downloading a different rom now. Which I will have to sideload agian. Any idea where im going wrong? Im currently using TWRP 2.6.3.0 is that not ok, should I upgrade it?
When I sideload the rom will I not need to flash a boot.img? I thought that was needed seen as I am s-on
Thanks very much for your help
-josh- said:
Ok so I managed to sideload the ordroid i was previously trying to install but same problems so Im downloading a different rom now. Which I will have to sideload agian. Any idea where im going wrong? Im currently using TWRP 2.6.3.0 is that not ok, should I upgrade it?
When I sideload the rom will I not need to flash a boot.img? I thought that was needed seen as I am s-on
Thanks very much for your help
Click to expand...
Click to collapse
are you using a Sprint phone ?
if no update to TWRP 2.6.3.3
clsA said:
are you using a Sprint phone ?
if no update to TWRP 2.6.3.3
Click to expand...
Click to collapse
No international ill do that first then
-josh- said:
No international ill do that first then
Click to expand...
Click to collapse
no we stopped flashing boot.img last May
and you need the new recovery for all the kitkat roms
clsA said:
no we stopped flashing boot.img last May
and you need the new recovery for all the kitkat roms
Click to expand...
Click to collapse
Houston we have boot...
lol was scared there for a second it was just the recovery needed updating what a ****. Thanks very much
for your help greatly appreciated.
-josh- said:
Houston we have boot...
lol was scared there for a second it was just the recovery needed updating what a ****. Thanks very much
for your help greatly appreciated.
Click to expand...
Click to collapse
Glad to help :good::highfive:
Has anyone experienced this? I have to force reboot when I load into recovery.
It's a new phone from the factory, it's unlocked and has TWRP 2.6.00
Drakeskakes said:
Has anyone experienced this? I have to force reboot when I load into recovery.
It's a new phone from the factory, it's unlocked and has TWRP 2.6.00
Click to expand...
Click to collapse
please specify the device, or just post a fastboot getvar all (excluding IMEI and s/n)
2.6.0.0 sound kind of outdated
Sounds like a firmware issue, you need be firnware with new touch screen driver
HTC One
Like nkk71 said get TWRP 2.6.3.4
I just went with Clockwork. I only wanted to use TRWP because my old phone had it, and I hate learning new things. Now I'm trying to do the OTA Kitkat update and it's not working. I hate these stupid phones
Drakeskakes said:
I just went with Clockwork. I only wanted to use TRWP because my old phone had it, and I hate learning new things. Now I'm trying to do the OTA Kitkat update and it's not working. I hate these stupid phones
Click to expand...
Click to collapse
you can't get OTA update with any custom recovery
you need stock recovery....
If you want help, post your fastboot getvar all minus serial no and IMEI
clsA said:
you can't get OTA update with any custom recovery
you need stock recovery....
If you want help, post your fastboot getvar all minus serial no and IMEI
Click to expand...
Click to collapse
So, to upgrade to Kit-kat then CM11 ....do I have to do a complete factory reset, then OTA update, then do unlock/root/s-off and install rom?
Why would you install kitkat then Cm 11?
Sent from my HTC One using Tapatalk 4
clsA said:
Why would you install kitkat then Cm 11?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Doesn't CM11 need to piggy back off Kitkat? I always hear "CM for Kitkat" and when I go to Goomanager, it doesn't give me CM11 only 10.1
All I want to CM on my phone, Im rooted, have CMW premium, SUperSU and unlocked...
When I go to CWM, it doesn't work, when I try and DL from Goo, it doesn't work, when I try to download from CM app, doesn't work. I'm going to throw this phone across the room. I hve done custom roms before, but always using a toolkit for PC. I only have access to a mac for the time being
Drakeskakes said:
Doesn't CM11 need to piggy back off Kitkat? I always hear "CM for Kitkat" and when I go to Goomanager, it doesn't give me CM11 only 10.1
Click to expand...
Click to collapse
No and why do you have 2 threads going ?
here's CM 11
http://forum.xda-developers.com/showthread.php?t=2579229
The Device must be unlocked and equipped with a Recovery,
you need a ROM.zip and optional GAPPS,the Download Links will you find here.
At first,make a Nandroid-Backup of your existing system!
When you first time flash the ROM or you changed from another ROM-Base,
do a Full Wipe via Recovery,flash the ROM, and then the GAPPS.
Restart to System,configure and enjoy CM11.
Click to expand...
Click to collapse
Are you still with hboot 1.44? Upgrade to have a newer touch driver pls
Sent from my HTC One using xda app-developers app
clsA said:
No and why do you have 2 threads going ?
here's CM 11
http://forum.xda-developers.com/showthread.php?t=2579229
Click to expand...
Click to collapse
This thread was only about TWRP not working, but someone piggy backed off this conversations after I started the other one.
clsA said:
No and why do you have 2 threads going ?
here's CM 11
http://forum.xda-developers.com/showthread.php?t=2579229
Click to expand...
Click to collapse
is GSM version for Sprint...before I go through with the DL
Drakeskakes said:
is GSM version for Sprint...before I go through with the DL
Click to expand...
Click to collapse
No... Why are you in the GSM forums ??
you most likely have the wrong recovery installed also
does your recovery file say m7wls ?
you need to be here getting your files
http://forum.xda-developers.com/sprint-htc-one
clsA said:
No... Why are you in the GSM forums ??
you most likely have the wrong recovery installed also
does your recovery file say m7wls ?
you need to be here getting your files
http://forum.xda-developers.com/sprint-htc-one
Click to expand...
Click to collapse
I have the proper recovery installed
Recovery-clockwork-touch-6.0.3.2-m7spr.img
I just tried this
Install zip from sdcard->
choose zip from sdcard->
0/ ->
Download ->
cm-11-20140309-NIGHTLY-myspr.zip
The log says
Installing update...
set_metadata_recursive:some changes failed
E:Error in /sdcard/o/Downoad/cm-11-20140309-NIGHTLY-M7spr.zip
(Status 7)
Installion Aborted
Drakeskakes said:
I have the proper recovery installed
Recovery-clockwork-touch-6.0.3.2-m7spr.img
I just tried this
Install zip from sdcard->
choose zip from sdcard->
0/ ->
Download ->
cm-11-20140309-NIGHTLY-myspr.zip
The log says
Installing update...
set_metadata_recursive:some changes failed
E:Error in /sdcard/o/Downoad/cm-11-20140309-NIGHTLY-M7spr.zip
(Status 7)
Installion Aborted
Click to expand...
Click to collapse
During the install, it aborted and now the stock rom won't load. It keep going into recovery and I have nothing to load it to. I can't shut it off, and I would like to just work on it tommorow. If it dies, I'm worried I wont be able to charge it back up to work on it. Now I'm pretty worried
Nevermind CM11 now working, switched from CWM to TWRP andf it works great
All I want to achieve is custom ROMS.
I was using Hasoon2000's all in one tool.
I have an unlocked bootloader.:good:
I am able to flash and run a custom recovery.:good:
When the phone was running it said I didn't have root access.
I tried to install CM11.
Somewhere along the way things got messed up.
My phone will not boot past the HTC "Quietly Brilliant" screen.
I cant seem to get the stock RUU.zip to work.
I have not been able to sideload anything either.
I feel like I have tried everything.
Does anyone know to fix my phone?
Does me doing all this on 4.4.2 have to do with it?
Please help me, I'm about throw this thing at the wall, and that's not like me!!! Haha.
Thank you anyone that can help, seriously I need it.:highfive:
I used the CM installer to flash a custom Rom, worked brilliantly.
For you to have installed CM11 and run the Rom means you done everything right.
Remembering back to CM11 I had on the M7 root is not enabled by default, you turn it on within the Rom then good to go.
Are you able to reflash CM11 to get it back working?
Some roms will not boot up as well unless you have a correct/specific kernal or sometimes recovery too..
twerg said:
I used the CM installer to flash a custom Rom, worked brilliantly.
For you to have installed CM11 and run the Rom means you done everything right.
Remembering back to CM11 I had on the M7 root is not enabled by default, you turn it on within the Rom then good to go.
Are you able to reflash CM11 to get it back working?
Some roms will not boot up as well unless you have a correct/specific kernal or sometimes recovery too..
Click to expand...
Click to collapse
I never successfully installed CM11. I cant flash anything. I have just learned how to push files to my SDcard but I also ran into it saying cant mount cache. I ffeel like I blew it somewhere. I also have S-On.
jamba7 said:
I never successfully installed CM11. I cant flash anything. I have just learned how to push files to my SDcard but I also ran into it saying cant mount cache. I ffeel like I blew it somewhere. I also have S-On.
Click to expand...
Click to collapse
S-On does not mean much, ive never S-Offd a mobile.
Read up about flashing and making fixes there are plenty of help threads here.
I am not one to really hep, I destroyed my first M7, got another 2 and have one stock and the other i rooted and flash to custom rom via the CM Installed, have not had an issue with it since. Just do not wipe storage, i managed to wipe the firmware somehow and killed the phone. Side loading/pushing is pain in the but..
Did you run perm.root in hasoon tool?
Tjapper said:
Did you run perm.root in hasoon tool?
Click to expand...
Click to collapse
I tried to. It didn't work correctly.
twerg said:
S-On does not mean much, ive never S-Offd a mobile.
Read up about flashing and making fixes there are plenty of help threads here.
I am not one to really hep, I destroyed my first M7, got another 2 and have one stock and the other i rooted and flash to custom rom via the CM Installed, have not had an issue with it since. Just do not wipe storage, i managed to wipe the firmware somehow and killed the phone. Side loading/pushing is pain in the but..
Click to expand...
Click to collapse
I did accidentally wipe storage.
jamba7 said:
I did accidentally wipe storage.
Click to expand...
Click to collapse
You need OTG cable or figure out how to adb sideload in TWRP 2.6.3.3
SaHiLzZ said:
You need OTG cable or figure out how to adb sideload in TWRP 2.6.3.3
Click to expand...
Click to collapse
I can boot into twrp.
Then adb push or adb sideload a custom ROM there are couple threads dedicated to these commands
SaHiLzZ said:
Then adb push or adb sideload a custom ROM there are couple threads dedicated to these commands
Click to expand...
Click to collapse
I have tried that it goes through but wont boot the rom. Just sits on HTC logo when booting up.
jamba7 said:
I have tried that it goes through but wont boot the rom. Just sits on HTC logo when booting up.
Click to expand...
Click to collapse
Exact ROM name and exact recovery version?
SaHiLzZ said:
Exact ROM name and exact recovery version?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2674222
TWRP 2.6.3.3
These are the two I'm about to try.
I really just want CM though.
SaHiLzZ said:
Exact ROM name and exact recovery version?
Click to expand...
Click to collapse
It says E: Unable to mount '/ cache'
jamba7 said:
http://forum.xda-developers.com/showthread.php?t=2674222
TWRP 2.6.3.3
These are the two I'm about to try.
I really just want CM though.
Click to expand...
Click to collapse
What's your output of fastboot getvar all
SaHiLzZ said:
What's your output of fastboot getvar all
Click to expand...
Click to collapse
I don't know what that means haha. Sorry.
jamba7 said:
I have tried that it goes through but wont boot the rom. Just sits on HTC logo when booting up.
Click to expand...
Click to collapse
May not be the same case for you but this is what happened to me, nothing would work over a 7hrs online session trying to fix. Ended up having to get another mobile.. Good luck
SaHiLzZ said:
What's your output of fastboot getvar all
Click to expand...
Click to collapse
I dont know what happened but after the sideload of the stock rom it worked.
Backing up, flashing CM11 thank you!!!
jamba7 said:
I dont know what happened but after the sideload of the stock rom it worked.
Backing up, flashing CM11 thank you!!!
Click to expand...
Click to collapse
Good work, well done! Bet you feel relieved now lol
jamba7 said:
I dont know what happened but after the sideload of the stock rom it worked.
Backing up, flashing CM11 thank you!!!
Click to expand...
Click to collapse
Great news!
Hey,
I dont know how different things are now, i installed a RUU with lollipop and i've been trying to flash TWRP but after i try to get into recovery and i got stuck at the logo with "entering into recovery...", adb detects device and nothing happens, tried to delete cache still didnt work. I bet i'm missing something as stupid as a simple boot...
Terramoto said:
Hey,
I dont know how different things are now, i installed a RUU with lollipop and i've been trying to flash TWRP but after i try to get into recovery and i got stuck at the logo with "entering into recovery...", adb detects device and nothing happens, tried to delete cache still didnt work. I bet i'm missing something as stupid as a simple boot...
Click to expand...
Click to collapse
you flash the recovery for the m7wls.
Aldo101t said:
you flash the recovery for the m7wls.
Click to expand...
Click to collapse
what kind of statement was that? Or was it a question? Yep i flashed m7wls isn't that sprint version of TWRP?
EDIT: I think i know what you mean, TWRP is not working well with lollipop, is that it?
Terramoto said:
what kind of statement was that? Or was it a question? Yep i flashed m7wls isn't that sprint version of TWRP?
EDIT: I think i know what you mean, TWRP is not working well with lollipop, is that it?
Click to expand...
Click to collapse
no just checking you installed the correct recovery, for lollipop you should have the latest recovery, that's all
I can't either get root or flash a ROM without access to recovery?
what else can i do?
Terramoto said:
what else can i do?
Click to expand...
Click to collapse
Reflash latest firmware from here http://forum.xda-developers.com/showthread.php?t=2795856 (i recommend Modified Firmware....removed hboot, recovery & boot (fastboot flashable))
Then flash latest recovery twrp-2.8.6.0-m7wls..
crazykas said:
Reflash latest firmware from here http://forum.xda-developers.com/showthread.php?t=2795856 (i recommend Modified Firmware....removed hboot, recovery & boot (fastboot flashable))
Then flash latest recovery twrp-2.8.6.0-m7wls..
Click to expand...
Click to collapse
Didnt work, it tries to enter recovery but its like there's no recovery. The phone's not letting me flash the recovery only the stock one
Terramoto said:
Didnt work, it tries to enter recovery but its like there's no recovery. The phone's not letting me flash the recovery only the stock one
Click to expand...
Click to collapse
Did you flash the firmware first?
crazykas said:
Did you flash the firmware first?
Click to expand...
Click to collapse
yeah, i flashed the modified first then tried to flash recovery, it just wont go into recovery. Is there a way to downgrade back to kitkat? Everything was working good with kk, i had to replace the display, camera and battery so i flashed lollipop RUU thinking there wouldnt be any difference... Now i can't even get root
Terramoto said:
yeah, i flashed the modified first then tried to flash recovery, it just wont go into recovery. Is there a way to downgrade back to kitkat? Everything was working good with kk, i had to replace the display, camera and battery so i flashed lollipop RUU thinking there wouldnt be any difference... Now i can't even get root
Click to expand...
Click to collapse
Was there any error when you flashing recovery?It just doesn't boot to recovery?Then you should flash FULL RUU..It should be the fix
crazykas said:
Was there any error when you flashing recovery?It just doesn't boot to recovery?Then you should flash FULL RUU..It should be the fix
Click to expand...
Click to collapse
no error, everything went smooth its just the boot part, funny thing is im able to flash and boot twrp 2.5.0.0 but im not able to use it because it doesnt respond to touch. I'm currently with stock recovery but i'd like to root and remove crappy apps from my phone :\
Terramoto said:
no error, everything went smooth its just the boot part, funny thing is im able to flash and boot twrp 2.5.0.0 but im not able to use it because it doesnt respond to touch. I'm currently with stock recovery but i'd like to root and remove crappy apps from my phone :\
Click to expand...
Click to collapse
i faced that prob too,but i just had to update to latest firmware & recovery.Flash twrp 2.6.0 & try.
crazykas said:
i faced that prob too,but i just had to update to latest firmware & recovery.Flash twrp 2.6.0 & try.
Click to expand...
Click to collapse
I think i did that, isnt that what RUU's suppose to do?
Anyway, here's the log and last_kmsg if anyone knows how to trace this
log:
http://www.pastebin.ca/2978960
Last_kmsg:
http://pastebin.ca/2978961
@mdmower
I was told that since i replaced parts i might have replaced a part thats not the same as the original one and that i would need to make a custom recovery. I've already download the kmsg report (http://pastebin.com/USayUFqx) i just need some eyes that understand whats happening.