Hi all, i am trying to flash standard firmware on my xperia z from PAC rom, i downloaded a firmware package and went to flash it through flash tool. When it asked me to put the phone into flashmode i powered down the device held volume down and plugged in the USB, but no green light or any sign that the phone connected into flashmode. So then i thought ok it may be the kernal, so downloaded another kernel proceded to put the phone into Fastboot mode and nothing -_-
Would really like to go back to standard firmware, but being unable to connect the phone to either Fastboot or Flashmode i dont see what i can do?
Anybody have any suggestions?
Thanks in advance. :good:
Bump
Too me all seems fine?
Too me all seems fine?
i can enter fastboot using the ADB command, but it will not go into it when i hold volume up + plug in USB?
Related
Well I explain you my problem.
Since I installed last saturday the last 4.3 ROM thanks to Doomlord, I noticed my phone doesn´t charge while in power off, it just doesn´t respond to the cable charger, I tried with several cables, wall chargers, via PC,... with no result, also looking for a solution I also noticed it doesn´t also respond to comands with volume buttons so it can not boot to flashmode and fastboot using the normal way.
booting to flashmode or Flashmode is not an issue as I found a way of doing it actually a couple of them, I will explain them just in case somebody is in a similar problem than me...
Via software Using flashtool (flash/fastboot) the aplication can force the phone to boot in fastboot via adb, using PCcompanion, (flash/repair) when it checks the phone after downlodaing the firmware it forces the phone to reboot in flashmode (in my case it doesn´t it just powers off and gets stucked but just pressing the power button it does, once booted in flashmode you can open flashtool and flash the desired ROM)
Via Hardware As I said it doesn´t respond when I plug in the cable but with the cable connected to the computer and pressing volume UP/down and power until it vibrates it will boot to flashmode or fastboot.
Now lets go back to my main problem...
I have being doing several things in order to solve it with no luck...
1º flash .278 kernel with recovery thanks to sj8023ld
2º Downgrade to .145 Xperiment custom ROM
3º Downgrade to .141 oficial using flashtool (result bootloader allowed: no" when it was unlocked before)
4º Flash again .141 with flashtool (bootloader again unlocked)
5º relock bootloader and flash with PCcompanion (flash/repair)
6ºFlash .145 oficial using Flashtool
7º Unlock bootloader, Root (easyrooting toolkit Doomlord) and CWM V9 by davidmarco.
Now I am again in 4.3 leaked with root and .278 kernel
After doing all this I couldn´t find a solution, Do you know guys if I can do anything else?
Thanks a lot for your help in advance
All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know
iSpammer said:
All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know
Click to expand...
Click to collapse
How did you solve your problem?
Thanks
onomico said:
How did you solve your problem?
Thanks
Click to expand...
Click to collapse
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other
iSpammer said:
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other
Click to expand...
Click to collapse
No, sorry, when powered on it is recognized as normal and on power off it is not detected at all
I have problems in my stock fw with charging while powered off. Does not at all, quite the inconvenience. However if you hold the power button my charge light comes on until my phone has enough juice to power up (well it doesn't have enough juice ever, but I quickly put into airplane mode till it charges a but more...)
Sent from my LT30a
Please help,
After the upgrade trough flashtools to the last firmware (.205) i'm not able to get into the fastboot and flashmode mode anymore,
Tried many things, and now i'm tryng to force it trough the adb fastboot interface (depuration mode, with the device powered on) lets see how it performs, but i need help to get this working again as normally.
Thanks
raz0r1991 said:
Please help,
After the upgrade trough flashtools to the last firmware (.205) i'm not able to get into the fastboot and flashmode mode anymore,
Tried many things, and now i'm tryng to force it trough the adb fastboot interface (depuration mode, with the device powered on) lets see how it performs, but i need help to get this working again as normally.
Thanks
Click to expand...
Click to collapse
Just for your knowledgement, now to access the fastboot/flashmode in new firmwares you must press volume key (+ or - ) power button and plug the cabble with the phone powered off.
Problem solved.
Guys,
I flashed a stock kernel (.207) through fastboot for relocking bootloader.. I was on CM 10.2 (FXP)
I was planning to flash .207 stock through flashmode after relocking BL
But the phone continuosly bootloops. It does not stay in fastboot or flashmode for more than 2 secs, so I cant flash the original kernel of CM 10.2
Also, pc says USB device not recognized when I connect in fastboot or flashmode,I have installed all the drivers also.
Please help me out guys, its urgent..
SOLVED:
Tried this method:
"You mean the problem you were facing is, it keeps on bootlooping even you turn it off via yellow button(off button at the back).then you need to do this. First, ready the flash tool ( until it it prompts to connect the phone.) Then open the back cover, you need a stick or a ballpen to be a tool for pressing the button, then put the pen in standing posistion(the tip's up) hold your phone,place the yellow button against the tip of the pen, press the volume down(if im not mistaken for the flashmode). If you follow me right, you will notice that if you push your phone down, the tip of the pen will trigger the button.. Then ready your usb data cable using your other hand but dont insert it in this point... Now press your phone down until it turn off. Hold and press the volume down(dont release it until you see the green light. Count to five so the movements will sync, after 5 release the pen and immediately attach the cable. If your lucky enough, you can do this in first try."
IT WORKED!!! LIFE SAVER! thanks to Aljon!!
Uhm to relock the bootloader you need to install a Stock ROM via Flashtool.. No need to mess with fastboot mode etc etc..
You could try to reflash the boot.img from the FXP you used before.
~~ Regards
mrjraider said:
Uhm to relock the bootloader you need to install a Stock ROM via Flashtool.. No need to mess with fastboot mode etc etc..
You could try to reflash the boot.img from the FXP you used before.
~~ Regards
Click to expand...
Click to collapse
THe problem is my phone does not stay in fastboot or flashmode long enough
It again goes into bootloop
Also my pc says USB not recognized even when I have installed all drivers (both win 7 and 8)
Use another cable? Or USB port
~~Regards
Hello updated now the phone has a red flashing light and when i click the volume up and power button the phone vibrates for 3 time and then nothing happens and i tried charging it and it just keeps rebooting and ending up not charging at all. How do i fix this?
Hi
Hi,download and install c6906 stock (ftf) rom via flashtool on your phone
baku_boy_97 said:
Hi,download and install c6906 stock (ftf) rom via flashtool on your phone
Click to expand...
Click to collapse
the phone is not turning on completely and i cant access fastboot or flashmode.
last night the phone decided to work again but then this morning after charging it to 100% the phone is stuck on a green light now and nothing else happenes tried all the volumepressing and reset button nothing helps
Shut down your phone and now Press volume down button and Connect your phone on your computer and now your phone connected in flashmode then flash any stock c6906 ftf rom via flashtool and your problem will fixed now
But before you must install flashmode and other drivers from c: flashtool /drivers (look like this)
baku_boy_97 said:
Shut down your phone and now Press volume down button and Connect your phone on your computer and now your phone connected in flashmode then flash any stock c6906 ftf rom via flashtool and your problem will fixed now
But before you must install flashmode and other drivers from c: flashtool /drivers (look like this)
Click to expand...
Click to collapse
I fixed my issue thanks for the help
Thanks you too
I used FlashTool to flash Sony Z3+ E6553 and now phone cannot power on at all. When I plug in to PC, PC can detect but flashtool cannot flash anymore. The phone was working fine, only has phone lock. Please help revise the phone. Thanks.
citifone said:
I used FlashTool to flash Sony Z3+ E6553 and now phone cannot power on at all. When I plug in to PC, PC can detect but flashtool cannot flash anymore. The phone was working fine, only has phone lock. Please help revise the phone. Thanks.
Click to expand...
Click to collapse
Are you sure that your battery is charged?
Try this: press and hold power and volume up button for 10 seconds and see does the phone vibrate.If vibrate flash again via flashtool.,he should works.
Allek84 said:
Are you sure that your battery is charged?
Try this: press and hold power and volume up button for 10 seconds and see does the phone vibrate.If vibrate flash again via flashtool.,he should works.
Click to expand...
Click to collapse
Battery was fully charged and I've tried that but phone does not response at all to flashtool. When plug in to PC, in device manager under USB controllers, it sees it as SOMC Flash Drive. I think the phone boot is dead.
citifone said:
Battery was fully charged and I've tried that but phone does not response at all to flashtool. When plug in to PC, in device manager under USB controllers, it sees it as SOMC Flash Drive. I think the phone boot is dead.
Click to expand...
Click to collapse
Listen,start flashtool again and hit flash and when pop up windows show press and hold volume down button and connect phone to cable.It should to install so called s1 boot driver(SEMC flash device)Do like I said and see what happends when you connect phone to cable.
If pc install any driver start flashtool again and try to flash again.
Before everything,try to press and hold power and volume up buttoins for more time,about 15 seconds and see did he vibrate.
Allek84 said:
Listen,start flashtool again and hit flash and when pop up windows show press and hold volume down button and connect phone to cable.It should to install so called s1 boot driver(SEMC flash device)Do like I said and see what happends when you connect phone to cable.
If pc install any driver start flashtool again and try to flash again.
Before everything,try to press and hold power and volume up buttoins for more time,about 15 seconds and see did he vibrate.
Click to expand...
Click to collapse
Thanks for your help...The phone was flashed successfully with flash tool with flash file E6553_28.0.A.4.8. After flash done, phone was dead, cannot power on anymore. Now when I tried to flash it again, volume down, insert USB the flashtool show as: Device detected with USB debugging off. It doesn't go to flash mode anymore. I took the back cover off, remove battery connector flex cable and connect it back and try flashing many times but flashtool will not detect phone in flash mode..PC can detect phone because it makes connecting sound on PC but detects as what mode I don't know. In device manager, it doesn't show any device in com port but it shows SOMC Flash Device in USB controllers. I tried to press volume up + power but nothing happened. Once again thanks for your help.
somc flash device means dead boot....its no solution yet for it,sorry
this guy or website promise to repair this dead boot problem via test point look here:
ht_tp://www.vungoc-mobile.com/index.php/unlock/932-repair-boot-unbrick-sony-e6553-xperia-z3
or here
http://www.vungoc-mobile.com/index.php/unlock/932-repair-boot-unbrick-sony-e6553-xperia-z3
citifone said:
Thanks for your help...The phone was flashed successfully with flash tool with flash file E6553_28.0.A.4.8. After flash done, phone was dead, cannot power on anymore. Now when I tried to flash it again, volume down, insert USB the flashtool show as: Device detected with USB debugging off. It doesn't go to flash mode anymore. I took the back cover off, remove battery connector flex cable and connect it back and try flashing many times but flashtool will not detect phone in flash mode..PC can detect phone because it makes connecting sound on PC but detects as what mode I don't know. In device manager, it doesn't show any device in com port but it shows SOMC Flash Device in USB controllers. I tried to press volume up + power but nothing happened. Once again thanks for your help.
Click to expand...
Click to collapse
As I understood, you tried to downgrade. Am I right? I heard that sometimes downgrading causes hard brick. I don't know how to fix it but only option is bringing service.
sone xperia z3+ (E6553) flash after dead
sone xperia z3+ (E6553) flash after dead
sony xperia z3+ e6553 model
flash with this model e6653
it does not start after with it
please help me sir