[t210r] stuck while flashing on odin - Galaxy Tab Q&A, Help & Troubleshooting

My Tab 3 T210R is stuck while flashing older STOCK firmware..
It shows
<OSM> Please wait..
<OSM> T210RUEAMJ1_T210RXARAMJ1_T210RUEAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> NVM.img
<ID:0/004> radio.img
<ID:0/004> recovery.img
<ID:0/004> system.img
and is STUCK ON SYSTEM!!
Please help!

Related

S3 mini odin flash not work

First sorry for my bad english.
today i flashed the new Version of maclaw´s Firmware, wiped after install and then rebooted the phone.
first it Setup new apps and then all apps where closed.
i then wanted to wipe again but i cant go to twrp per button Combo.
then i wanted to Flash stock Firmware via Odin, it installs all files. but when it rebooted it is still maclaw´s Firmware installed and booted.
what i do wrong.
thx for help
ODIN Output
<OSM> cm11.0_golden.maclaw.20140302.ODIN_TWRP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!

Trying to root Sprint note 5

I have been at it for days stuck on the recovery is not seandroid enforcing screen so I tried flashing back to stock firmware using Odin 3.10 and now this is the log I am getting any and all help and advice is appreciated I have installed the latest driver for my phone as well
[EMAIL="ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable.. <OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/EMAIL]

need help, can't run repair rom on SM-920C

Hello guys, i can't seem to repair my phone after an error using ODIN. My Model is SM-N920C from UAE (XSG region)
The error in Download mode is 'SW REV . CHECK FAIL. DEVICE: 3, BINARY: 2
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

How to rollback firmware from N910TTMB2EPG2 (6.0.1) to N910TTMB1COG2 or N910TTMB2DOK

Hi,
I recently upgraded my firmware to N910TTMB2EPG2. Most of the custom roms out here are on N910TTMB2DOK2 or N910TTMB1COG2. How do I downgrade my firmware to N910TTMB2DOK2 or N910TTMB1COG2?
After downloading the firmwares, when I try to flash it using ODIN I get below error messages.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1COG2_N910TTMB1COG2_N910TUVU1COG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I'm having the same problem! Did you ever figure it out?
I don't think you can downgrade from either EPG2 or EPJ2 mate.

Unknown BaseBand SM-N920C Note 5

Please help me my Note 5 has no Base band Model N920C. Also null IMEI
Thanks.
Reflash firmware with odin
sinkoo1979 said:
Reflash firmware with odin
Click to expand...
Click to collapse
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
shahidskt said:
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
Click to expand...
Click to collapse
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Solved no imei no base band
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
PRADEEPHONDA said:
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Click to expand...
Click to collapse
shahidskt said:
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
Click to expand...
Click to collapse
As I told ain't it..! Anyways you are welcome & cheers...!

Categories

Resources