First sorry for my bad english.
today i flashed the new Version of maclaw´s Firmware, wiped after install and then rebooted the phone.
first it Setup new apps and then all apps where closed.
i then wanted to wipe again but i cant go to twrp per button Combo.
then i wanted to Flash stock Firmware via Odin, it installs all files. but when it rebooted it is still maclaw´s Firmware installed and booted.
what i do wrong.
thx for help
ODIN Output
<OSM> cm11.0_golden.maclaw.20140302.ODIN_TWRP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Related
My Tab 3 T210R is stuck while flashing older STOCK firmware..
It shows
<OSM> Please wait..
<OSM> T210RUEAMJ1_T210RXARAMJ1_T210RUEAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> NVM.img
<ID:0/004> radio.img
<ID:0/004> recovery.img
<ID:0/004> system.img
and is STUCK ON SYSTEM!!
Please help!
Hello everyone reading this
before you reading this im a lilltle bit noob so yeah
yesterday i rooted my s5mini g800f and installed cm 12.1 on it everything went fine
this day either i wanted to go back to the stock rom so i downloaded stock android 4.4.2 for s5mini g800f
i went to odin flashed it but when i try to flash it this happens
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANL1_G800FVFG1ANL2_G800FXXU1AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
so it failed but when i started up my phone it said
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
so it did that but keys said to me that my phoe wasn't a supported device i think that kies said that because i installed a custom rom and rooted my device
but now i can't use my device i hope simebody can help me i dont know what to do
i can't get into recovery mode and the file size of the stock rom is 2.2 gb
i hope you guys can help me! much apprecheated
sorry for bad languege im not english
Thanks
Did you try to reflash with Odin ? Or flash a custom recovery and wipe all data ?
Hi,
i installed via Kies recovery the original samsung firmware on my SM-G800F (4.4.2)
after that I tried to install the [G800F][5.1.1][TouchWiz] Tweaked Stock Build, ROOTED with Odin 3.07 but it failed 2 times
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
Same problem with odin 3.09!
Try with other USB cable. I had the same issue with my tablet and this fix it.
Regards
Hi Gents,
Good day!
I'm trying to bypass the 6.1 "verify your account" thing for my sisters Note5-N9208. Already working on this for several hours and all fails.
tried approach:
OTG (file xplorer isn't showing up)
realterm software( in which emergency dialer should show up, didn't work on my phone)
confusing phone thru wifi ( upon connecting to wifi to go next/ dced the wifi and tried to share the info)
Flash the other latest stock firmware (obviously, didn't even wipe the phone's data and not working)
I read some good info that I should reverted the phone OS back to lower android version like (5.1.1) and bypassing it via OTG should work.
When I tried to flash the oldest version from samobile it didn't work.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/003> Added!!
Note: This is my sisters stupid mistake, playing with her google account and completely mess up with her password, I thought that resetting it thru recovery like with old android version will make the phone clears again but unfortunately it doesn't.
Asking for your help if someone can shed some light on this concern.
Thanks,
Grimm.
Please help me my Note 5 has no Base band Model N920C. Also null IMEI
Thanks.
Reflash firmware with odin
sinkoo1979 said:
Reflash firmware with odin
Click to expand...
Click to collapse
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
shahidskt said:
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
Click to expand...
Click to collapse
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Solved no imei no base band
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
PRADEEPHONDA said:
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Click to expand...
Click to collapse
shahidskt said:
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
Click to expand...
Click to collapse
As I told ain't it..! Anyways you are welcome & cheers...!