Hi,
i installed via Kies recovery the original samsung firmware on my SM-G800F (4.4.2)
after that I tried to install the [G800F][5.1.1][TouchWiz] Tweaked Stock Build, ROOTED with Odin 3.07 but it failed 2 times
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
Same problem with odin 3.09!
Try with other USB cable. I had the same issue with my tablet and this fix it.
Regards
Related
This is resolved (I simply pulled battery, and tried again.)
Hello,
Quick backstory. Prior to the last OTA from ATT I could actually get, I had used towerlroot and everything worked fine. I then updated and lost root(naturally). Now I could not get my S5 to OTA to the most recent update (currently running G900AUCU2ANG3) and tried to use ODIN to flash the original Stock firmware. This process failed. Any suggestions on how I can start over?
Edit to add:It is soft bricked now. Can only load into the "Kies" recovery screen
Here is ODIN output: <ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Leon
ho, i have a S6 from att g920a, i do a factory reset and dont start any more, only see the first screen "S6" and reboot constantly, turn on only if its connected to the charger, already try to flash with odin but not lucky, THANKS!!!
this is with odin 3.10.7
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
latest firm OJ7
THANKS!!!
after rooting my device i wanted to flash stock firmware..i have both new and old firmware but each time i try to flash them using odin it fails and shows "SW REV.CHECK FAIL.DEVICE:3,BINARY:2"
and this shows up on my odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi all,
This may be a newb question but I've searched high and low and can't find an answer to this anywhere...
A friend gave me their parents tablet to try and fix. It's a Galaxy Tab 2 10.1 (GT-P5100). It won't boot, though will display charging animation so it's not a screen issue. Booted into download mode, installed Odin 3.07, downloaded firmware (P5100XXDMK3_P5100OPSDMK1_P5100XXDMK1_HOME.tar.md5) and flashed. Odin reports everything successful but the tablet boots and displays "Firmware update encountered an issue. Please select recovery mode in Kies & try again.". Have flashed a second time with a different carrier version of the same firmware - same result. The fact that its still writing gives me hope but I'm out of my depth as to what to do next. Any help would be greatly appreciated!
Log from previous flash:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
snico said:
Hi all,
This may be a newb question but I've searched high and low and can't find an answer to this anywhere...
A friend gave me their parents tablet to try and fix. It's a Galaxy Tab 2 10.1 (GT-P5100). It won't boot, though will display charging animation so it's not a screen issue. Booted into download mode, installed Odin 3.07, downloaded firmware (P5100XXDMK3_P5100OPSDMK1_P5100XXDMK1_HOME.tar.md5) and flashed. Odin reports everything successful but the tablet boots and displays "Firmware update encountered an issue. Please select recovery mode in Kies & try again.". Have flashed a second time with a different carrier version of the same firmware - same result. The fact that its still writing gives me hope but I'm out of my depth as to what to do next. Any help would be greatly appreciated!
Log from previous flash:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
and I've just realised this was posted in the wrong section. Sorry =(
Hi,
I have a Sprint SM-G973U that is locked to an account on Sprint.
I wanted to flash it with an unlocked U1, assuming this will let me use it with my verizon sim.
When i try to flash the G973U1_SAU_1 file, I get this error
SW Rev Check Fail : [abl]Fused 2 > Binary 1
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7451 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried also tried the recovery tar file and get this failure
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 64 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice?
Same
I have the same problem, ever figure it out?
Nido_5 said:
Hi,
I have a Sprint SM-G973U that is locked to an account on Sprint.
I wanted to flash it with an unlocked U1, assuming this will let me use it with my verizon sim.
When i try to flash the G973U1_SAU_1 file, I get this error
SW Rev Check Fail : [abl]Fused 2 > Binary 1
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7451 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried also tried the recovery tar file and get this failure
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 64 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice?
Click to expand...
Click to collapse
Which Odin version are you using? You need the patched version to flash it to U1 firmware.
Nido_5 said:
Hi,
I have a Sprint SM-G973U that is locked to an account on Sprint.
I wanted to flash it with an unlocked U1, assuming this will let me use it with my verizon sim.
When i try to flash the G973U1_SAU_1 file, I get this error
SW Rev Check Fail : [abl]Fused 2 > Binary 1
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7451 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried also tried the recovery tar file and get this failure
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 64 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice?
Click to expand...
Click to collapse
#1 Sprint phones are locked to sprint.
#2 If you mean it's locked to a Google or Samsung Account, Flashing the U1 firmware will get you NOWHERE
#3 You are trying to flash a level 1 bootloader to a device that has been upgraded to a Level 2 bootloader. (this is impossible, you can't downgrade)
So, First, it can't be locked to a Google/Samsung Account, there ARE ways to bypass but it's much more than just flashing a firmware... And it's hard because stealing or using stolen/lost phones is WORNG!!! (BUT if it's really LEGALLY your device, you can do what you need to do to remove an old account)
Second, the phone will STILL have to be SIM unlocked from Sprint, even if you manage to get the Account removed.... This is a whole other process....
Then you can finally flash the (NEWEST) Verizon firmware and use it with them, that is ASSUMING the IMEI is CLEAN and has been verified to be compatible on Verizons BYOD page...