Database Develop

Stuck in Odin

I am trying to install an Official Rom I9295XXUCNE5_I9295DBTCNE1_DBT with Odin but it stuck all the time here
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
Can anyone help me please ? Thank you

Softbricked SM-G900A Help me pls.

When i tried to unbrick my phone in odin i get this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Can't flash with Odin

Hi,
i installed via Kies recovery the original samsung firmware on my SM-G800F (4.4.2)
after that I tried to install the [G800F][5.1.1][TouchWiz] Tweaked Stock Build, ROOTED with Odin 3.07 but it failed 2 times
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?

Same problem with odin 3.09!

Try with other USB cable. I had the same issue with my tablet and this fix it.
Regards

Help with S6

ho, i have a S6 from att g920a, i do a factory reset and dont start any more, only see the first screen "S6" and reboot constantly, turn on only if its connected to the charger, already try to flash with odin but not lucky, THANKS!!!
this is with odin 3.10.7
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
latest firm OJ7
THANKS!!!

G873U Odin flashing failures....

Hi,
I have a Sprint SM-G973U that is locked to an account on Sprint.
I wanted to flash it with an unlocked U1, assuming this will let me use it with my verizon sim.
When i try to flash the G973U1_SAU_1 file, I get this error
SW Rev Check Fail : [abl]Fused 2 > Binary 1
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7451 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried also tried the recovery tar file and get this failure
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 64 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice?

Same
I have the same problem, ever figure it out?
Nido_5 said:
Hi,
I have a Sprint SM-G973U that is locked to an account on Sprint.
I wanted to flash it with an unlocked U1, assuming this will let me use it with my verizon sim.
When i try to flash the G973U1_SAU_1 file, I get this error
SW Rev Check Fail : [abl]Fused 2 > Binary 1
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7451 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried also tried the recovery tar file and get this failure
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 64 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice?
Click to expand...
Click to collapse

Which Odin version are you using? You need the patched version to flash it to U1 firmware.

Nido_5 said:
Hi,
I have a Sprint SM-G973U that is locked to an account on Sprint.
I wanted to flash it with an unlocked U1, assuming this will let me use it with my verizon sim.
When i try to flash the G973U1_SAU_1 file, I get this error
SW Rev Check Fail : [abl]Fused 2 > Binary 1
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7451 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried also tried the recovery tar file and get this failure
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 64 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice?
Click to expand...
Click to collapse
#1 Sprint phones are locked to sprint.
#2 If you mean it's locked to a Google or Samsung Account, Flashing the U1 firmware will get you NOWHERE
#3 You are trying to flash a level 1 bootloader to a device that has been upgraded to a Level 2 bootloader. (this is impossible, you can't downgrade)
So, First, it can't be locked to a Google/Samsung Account, there ARE ways to bypass but it's much more than just flashing a firmware... And it's hard because stealing or using stolen/lost phones is WORNG!!! (BUT if it's really LEGALLY your device, you can do what you need to do to remove an old account)
Second, the phone will STILL have to be SIM unlocked from Sprint, even if you manage to get the Account removed.... This is a whole other process....
Then you can finally flash the (NEWEST) Verizon firmware and use it with them, that is ASSUMING the IMEI is CLEAN and has been verified to be compatible on Verizons BYOD page...