Database Develop

Can't flash with Odin

Hi,
i installed via Kies recovery the original samsung firmware on my SM-G800F (4.4.2)
after that I tried to install the [G800F][5.1.1][TouchWiz] Tweaked Stock Build, ROOTED with Odin 3.07 but it failed 2 times
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?

Same problem with odin 3.09!

Try with other USB cable. I had the same issue with my tablet and this fix it.
Regards

Failed flashing marshmallow using Odin

I get this error while flashing from Odin.. Im using SM-N2908 Duos Note5.. please help me I want to update my phone to marshmallow.
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.

samsung j7 2016 got on boot loop

after rooting my device i wanted to flash stock firmware..i have both new and old firmware but each time i try to flash them using odin it fails and shows "SW REV.CHECK FAIL.DEVICE:3,BINARY:2"
and this shows up on my odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Cant go back to Stock on SM-N950W

Try to root My Note 8 SM-N950w
Did not work so try to go back to stock
this is what get:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
Please help

Garp78 said:
Try to root My Note 8 SM-N950w
Did not work so try to go back to stock
this is what get:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
Please help
Click to expand...
Click to collapse
What odin version are you using? Which stock firmware version?
Sent from my SM-N950F using Tapatalk

Flash works but won't go past "Firmware update encountered an issue..."

Hi all,
This may be a newb question but I've searched high and low and can't find an answer to this anywhere...
A friend gave me their parents tablet to try and fix. It's a Galaxy Tab 2 10.1 (GT-P5100). It won't boot, though will display charging animation so it's not a screen issue. Booted into download mode, installed Odin 3.07, downloaded firmware (P5100XXDMK3_P5100OPSDMK1_P5100XXDMK1_HOME.tar.md5) and flashed. Odin reports everything successful but the tablet boots and displays "Firmware update encountered an issue. Please select recovery mode in Kies & try again.". Have flashed a second time with a different carrier version of the same firmware - same result. The fact that its still writing gives me hope but I'm out of my depth as to what to do next. Any help would be greatly appreciated!
Log from previous flash:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!

snico said:
Hi all,
This may be a newb question but I've searched high and low and can't find an answer to this anywhere...
A friend gave me their parents tablet to try and fix. It's a Galaxy Tab 2 10.1 (GT-P5100). It won't boot, though will display charging animation so it's not a screen issue. Booted into download mode, installed Odin 3.07, downloaded firmware (P5100XXDMK3_P5100OPSDMK1_P5100XXDMK1_HOME.tar.md5) and flashed. Odin reports everything successful but the tablet boots and displays "Firmware update encountered an issue. Please select recovery mode in Kies & try again.". Have flashed a second time with a different carrier version of the same firmware - same result. The fact that its still writing gives me hope but I'm out of my depth as to what to do next. Any help would be greatly appreciated!
Log from previous flash:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
and I've just realised this was posted in the wrong section. Sorry =(