Related
Hey
I tried installing
Android Revolution HD 40.3
MaximusHD | 30.0.0
OrDroid 30.0.0
and they all have the problem of the locksceen being distorted
i attached a photo
does anyone else got this problem?
Thanks
thereupemi said:
Hey
I tried installing
Android Revolution HD 40.3
MaximusHD | 30.0.0
OrDroid 30.0.0
and they all have the problem of the locksceen being distorted
i attached a photo
does anyone else got this problem?
Thanks
Click to expand...
Click to collapse
full wipe before installing any new roms
Ktan188 said:
full wipe before installing any new roms
Click to expand...
Click to collapse
I always do full wipe
I just tried installing each of them and found that the problem is in all of them
thereupemi said:
I always do full wipe
I just tried installing each of them and found that the problem is in all of them
Click to expand...
Click to collapse
Some reported it is a 4.06 base bug
What else did u do or install? That's not an Android issue nor a ROM one. You must've installed something that's messing your lockscreen.
Did you restore HTC desktop from TiBu?
Sent from the darkest place in your mind.
if you use TWRP try Advanced WIP and wipe Data as well, it helped when I had some problems
flyboysek said:
if you use TWRP try Advanced WIP and wipe Data as well, it helped when I had some problems
Click to expand...
Click to collapse
when i change the system language to English everything works fine
i hope that HTC will roll out new base.
Thanks!
Hello guys
Today i updated my Z to 4.4.2 stock based rom (existenZ ultimate) and i want to calibrate the gyroscope. How to do that??! I don't see calibrate option in service menu!
I replaced servicemenu.apk with 4.3 one that have the calibrate menu then i tried to do calibrate and its fail every time (says bla bla bla your device not supported ( i cant remember) )
Now the cube in service menu rotate FAST and all the apps and games using gyroscope not working fine:crying:
Anyone can help please
(Rooted - deodexed - locked)
*******SOLVED!!******
androidfreak70 said:
Hello guys
Today i updated my Z to 4.4.2 stock based rom (existenZ ultimate) and i want to calibrate the gyroscope. How to do that??! I don't see calibrate option in service menu!
I replaced servicemenu.apk with 4.3 one that have the calibrate menu then i tried to do calibrate and its fail every time (says bla bla bla your device not supported ( i cant remember) )
Now the cube in service menu rotate FAST and all the apps and games using gyroscope not working fine:crying:
Anyone can help please
(Rooted - deodexed - locked)
Click to expand...
Click to collapse
What ROM you use before update? Did you try with factory reset?
neoxx3m said:
What ROM you use before update? Did you try with factory reset?
Click to expand...
Click to collapse
i was using eXistenZ ultra 6.6.0
i tried factory reset but didnt helped
androidfreak70 said:
i was using eXistenZ ultra 6.6.0
i tried factory reset but didnt helped
Click to expand...
Click to collapse
Reboot to recovery>format system,davik cache
after that flash rom see whether it resolves the issue
androidtweaker1 said:
Reboot to recovery>format system,davik cache
after that flash rom see whether it resolves the issue
Click to expand...
Click to collapse
neoxx3m said:
What ROM you use before update? Did you try with factory reset?
Click to expand...
Click to collapse
I fixed it!!!
Someone tolled me in the rom's thread to go to service menu then COMPASS the i did what the image saying and now its works!!!
Thank you all for help
androidfreak70 said:
I fixed it!!!
Someone tolled me in the rom's thread to go to service menu then COMPASS the i did what the image saying and now its works!!!
Thank you all for help
Click to expand...
Click to collapse
:good:
Hello Mates. I just changed my mind on building stock based ROM(s) & I recently worked with cm12 and this is my first build. Sadly I haven't tested much bugs yet as my device is trashed, but the ROM is boot-able(tested it on my friend's phone).
Note:
Your warranty will be void.
Also I/CyanogenMod are not responsible if the device(by any chance) is bricked.
Follow the steps below for correct installations(for people who're installing AOSP for the first time).
The sample theme that you see in the screenshot is S5 theme & can be installed from play store.
So this is pure CM12 ROM with no additional customization. You can checkout some screenshots. And kindly make sure these requirements are met:
Code:
1: You must have the latest recovery installed.
2. Make sure you're on 4.2.2/AOSP based ROM that runs on 4.2.2 bootloader.
3. Before installing the ROM please reset the device to factory default.
4. If the three steps above are met then proceed to "Procedure to install:" part.
Few things I've noted are:
1. Camera doesn't FC.
2. The sound doesn't crack while playing music.
3. Applying any theme changes the complete SystemUI.
4. Problems while connecting as UMS like the PC doesn't recognize the device & the device stops reading media/other files on SD.
5. Tiny lag at times.
6. At times some GApps may stop responding/force closes.
Click to expand...
Click to collapse
Links:
ROM(PZAndROM v4):
Android File Host.
GApps v5.0.x:
BasketBuild.
AFH
Procedure To Install:
1. Reboot to recovery.
2. Clear the entire ROM/RESET to factory default.
[OPTIONAL STEP]:Clear cache & dalvik/art cache.
3. Install the ROM.
4. Flash GApps.
5. Reboot.
Click to expand...
Click to collapse
Last Year's Build Features:
CF-Rooted.
S5 UI.
Xperia Z3 Walkman.
ViperFX.
S5 File Manager.
Custom Bootanimation Support.
Quick boot.
Ultra Power Saving Mode Launcher.
Removed Bloatwares.
Mi Ringtones, Notifications and Alarm tones.
BelleUI Icons.
Holo Launcher HD.
Keep.
WPS Office.
Click to expand...
Click to collapse
Before posting any error/query either before installing or after installing please make sure you've read the following:
1. You should be on any AOSP(w/ 4.2.2 BootLoader) or Stock-4.2.2 ROM.
2. You'll need an updated custom recovery.
3. Before installing do not forget to reset the device.
4. If any bug is found please do report I'll make a fix for it ASAP.
5. If it's about UI designing/icon designing, I'll be doing it if & only if I get free time so don't take it seriously guys :highfive:.
6. If you have any error I need a complete report about your device, example:
Code:
1. Device Model(Since it works even with other grand variants):
2. Recovery used:
3. Recovery Version:
4. Previous ROM Name:
5. Any kernel mods installed: Yes or No
6. a) Any other mod installed: Yes or No
b) If any other mod is installed provide it's details:
8. If anything outside this note occurs you're free to post your feedback :good:
Click to expand...
Click to collapse
HyDroid ROM v3: Last Year's Update
Any other bug please report when the ROM is available.[/SIZE]
Thanks to the following members for their help...
Code:
1. Pawitp for the Source codes & patches.
2. K2wl for Source codes.
3. Jackeagle & team for the guide.
Click to expand...
Click to collapse
I've stopped the ROM development due to lack of time and also I've switched to a new device.
Screenshots Of v3 ROM:
Occupied again...
First of all i apreciate to u for this rom.can I install through any cwm version on grand.sorry for my bad English
Sent from my GT-I9082 using XDA Premium 4 mobile app
Yes you can install it via any recovery. In Philz recovery you'll get a msg that the rom is using legacy property evnvironment. You can avoid it and installation would proceed.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Great work.....Thanks dev.....installed just now....everything went fine.....will use for few days and come back and post if any issues......
rmrajm1 said:
Great work.....Thanks dev.....installed just now....everything went fine.....will use for few days and come back and post if any issues......
Click to expand...
Click to collapse
Any time mate.
Tried installing through multiple recoveries but got stuck Samsung 19082 boot logo every time.
Mahz4130 said:
Tried installing through multiple recoveries but got stuck Samsung 19082 boot logo every time.
Click to expand...
Click to collapse
Did you do factory reset & wipe dalvik cache before installing?
PaletroxZ said:
Did you do factory reset & wipe dalvik cache before installing?
Click to expand...
Click to collapse
Yes.
Mahz4130 said:
Yes.
Click to expand...
Click to collapse
Mate tell me which android version did you have previously i.e before installing this rom, is it 4.1.2 or 4.2.2? If on 4.1.2 you'll have to update it to 4.2.2 via odin and then install the recovery and proceed with the rom installation my friend.
Mahz4130 said:
Tried installing through multiple recoveries but got stuck Samsung 19082 boot logo every time.
Click to expand...
Click to collapse
Are u on 4.2.2??!
I had the same issue of getting stuck on samsung grand i9082 screen. did factory/data wipe. i was initially on PA. then even flashed it from liquid smooth and aogp. but no luck.
Sent from my GT-I9082
Nice ROM.
All who tried to install this ROM need to install 4.2.2 Stock ROM then flash CWM and then Install This ROM for error-less installation.
karipari95 said:
I had the same issue of getting stuck on samsung grand i9082 screen. did factory/data wipe. i was initially on PA. then even flashed it from liquid smooth and aogp. but no luck.
Sent from my GT-I9082
Click to expand...
Click to collapse
Try out philz recovery mate. Choose the "Clean to Install New ROM" option. Then try flashing it.
Is there ultra power saving mode in this rom as in S5 ?
PaletroxZ said:
Try out philz recovery mate. Choose the "Clean to Install New ROM" option. Then try flashing it.
Click to expand...
Click to collapse
i have philz recovery. but i guess hemant suggested the right method to do it.:thumbup:
Sent from my GT-I9082 using XDA Free mobile app
Mr. 23 said:
Is there ultra power saving mode in this rom as in S5 ?
Click to expand...
Click to collapse
Yes the rom has an UPSM Launcher from S5 which can be used to reduce battery drain when your battery low.
karipari95 said:
i have philz recovery. but i guess hemant suggested the right method to do it.:thumbup:
Sent from my GT-I9082 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks You.:laugh::laugh::laugh::laugh:
PaletroxZ said:
Mate tell me which android version did you have previously i.e before installing this rom, is it 4.1.2 or 4.2.2? If on 4.1.2 you'll have to update it to 4.2.2 via odin and then install the recovery and proceed with the rom installation my friend.
Click to expand...
Click to collapse
CM 11 4.4.4 with 4.2.2 bootloader.
Q&A for [5.0.2] Resurrection Remix LBL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [5.0.2] Resurrection Remix LBL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Post Deleted
Have build 2 included fixes (SuperSU, seteonforce, data, etc.) ?
What should I do to use this ROM a daily driver (after flash rom, reboot, flash gapps) ?
Same question #4363467346
Hello guys, newbie question (not really, but okay)
So, I saw that this rom needs 4.4.x, so I installed XperianZe (The 4.4.4 version), after that I installed build #2, when the phone booted up, I turned off the adaptive brightness, after that, everything is going smooth.
BUT, Wifi (surprised, because dev said it's working), gsm data and voice not working, any suggestion?
I flashed This fix, but it's not working
balazs312 said:
Hello guys, newbie question (not really, but okay)
So, I saw that this rom needs 4.4.x, so I installed XperianZe (The 4.4.4 version), after that I installed build #2, when the phone booted up, I turned off the adaptive brightness, after that, everything is going smooth.
BUT, Wifi (surprised, because dev said it's working), gsm data and voice not working, any suggestion?
I flashed This fix, but it's not working
Click to expand...
Click to collapse
Root device (if not already rooted) open up terminal type:
su
enter
setenforce 0
enter
wait
Do not type su setenforce 0 because it will not work
Why Nav Bar is black in most applications? It's transparent in Home Screen and App Drawer.
cojii said:
Why Nav Bar is black in most applications? It's transparent in Home Screen and App Drawer.
Click to expand...
Click to collapse
No problem... it's normal android L interface.
Hi
I've tried in a lot of different ways, but the ROM doesn't work. After the first boot i'v enough time to set off the autobrightness option, but then the phone starts to reboots in loop anyway. before I had XperianZ3 4.4.4 KitKat, I've tried to flash the ROM normally, and I've tried to do a dirty flash. I've tried to install before the first build of the ROM over the second (normal flash and dirty flash) and viceversa(normal flash and dirty flash). The result is the same in all the cases. What should I do?
Hello guys, I flashed this build 2 and dont update.
Why? I put ramdisk, and I wipe cache and davilk
@Furrydaus you said that random reboot is fix but i have reboot when i enable autobrightness !
Guizão BR said:
Hello guys, I flashed this build 2 and dont update.
Why? I put ramdisk, and I wipe cache and davilk
Click to expand...
Click to collapse
what update did you expect?
If you expect that the new build was based on 5.0.3 you will need wait, sources to that version of android is not taken
Remlas said:
Have build 2 included fixes (SuperSU, seteonforce, data, etc.) ?
What should I do to use this ROM a daily driver (after flash rom, reboot, flash gapps) ?
Click to expand...
Click to collapse
Nope.
Read the thread again.
balazs312 said:
Hello guys, newbie question (not really, but okay)
So, I saw that this rom needs 4.4.x, so I installed XperianZe (The 4.4.4 version), after that I installed build #2, when the phone booted up, I turned off the adaptive brightness, after that, everything is going smooth.
BUT, Wifi (surprised, because dev said it's working), gsm data and voice not working, any suggestion?
I flashed This fix, but it's not working
Click to expand...
Click to collapse
Use other applications other than $cripter if that app doesn't work. Its a trial and error for some
cojii said:
Why Nav Bar is black in most applications? It's transparent in Home Screen and App Drawer.
Click to expand...
Click to collapse
↑ Android L Material Design in a nutshell
DarkLudo77 said:
Hi
I've tried in a lot of different ways, but the ROM doesn't work. After the first boot i'v enough time to set off the autobrightness option, but then the phone starts to reboots in loop anyway. before I had XperianZ3 4.4.4 KitKat, I've tried to flash the ROM normally, and I've tried to do a dirty flash. I've tried to install before the first build of the ROM over the second (normal flash and dirty flash) and viceversa(normal flash and dirty flash). The result is the same in all the cases. What should I do?
Click to expand...
Click to collapse
Try flashing stock and flashing from there. Possibly has to do with the Kernel not being stock.
Jermin94 said:
@Furrydaus you said that random reboot is fix but i have reboot when i enable autobrightness !
Click to expand...
Click to collapse
The fix is EXPERIMENTAL. I couldn't guarantee on all devices.
TheWolfer22 said:
what update did you expect?
If you expect that the new build was based on 5.0.3 you will need wait, sources to that version of android is not taken
Click to expand...
Click to collapse
No, I update buid 2 06 01 15 but dont update
What Gapps do you guys recommend? Bpear's or the PA Gapps?
I have a bug in the battery screen, it doesn't show the charging/discharging progress in time. Is it fixable?
i tried to flash it for the first time and i used build 2 but im just im a bootloop the logo keeps showing on and off and nothing happens
and im pretty sure i followed all the steps of the flashing correctly
aliiahmed.20 said:
i tried to flash it for the first time and i used build 2 but im just im a bootloop the logo keeps showing on and off and nothing happens
and im pretty sure i followed all the steps of the flashing correctly
Click to expand...
Click to collapse
What ROM were you using? Try to flash stock .207 kernel
link
can someone give me mirror download link to this rom ? mega link not working in india
Bruno_Puzoni said:
What Gapps do you guys recommend? Bpear's or the PA Gapps?
Click to expand...
Click to collapse
I use PA Gapps pico modular proper DPI version. Works like a charm. I prefer this small package while than I can install other apps (like gmail, hangouts) from store as user apps, not system apps.
---------- Post added at 08:21 AM ---------- Previous post was at 08:14 AM ----------
aliiahmed.20 said:
i tried to flash it for the first time and i used build 2 but im just im a bootloop the logo keeps showing on and off and nothing happens
and im pretty sure i followed all the steps of the flashing correctly
Click to expand...
Click to collapse
How long did you wait? For me first boot take about 10 minutes.
Bruno_Puzoni said:
What ROM were you using? Try to flash stock .207 kernel
Click to expand...
Click to collapse
Before flashing kernel make full wipe once again.
Hey, my device is so laggy about 5 minutes of usage...how can i solve this?
Thanks
Here is a small guide how to bring back the startup- and permission manager because I really miss it for our p9 lite.
First go to the playstore and install this app from huawei:
https://play.google.com/store/apps/details?id=com.huawei.pmplus
Start the app and choose install. After that start the phonemanager and go to settings. (top right)
Now go to shortcuts and choose startup manager. (orange icon)
Now you have the startup manager on the desktop. The permission manager is included if you press the topic on the top. Choose the apps which should be automatically start after reboot.
"Stopped working" on Revolution ROM rc2
xDavi01 said:
"Stopped working" on Revolution ROM rc2
Click to expand...
Click to collapse
Did you read the thread?
Android 6
Btw, try with RC3
xDavi01 said:
"Stopped working" on Revolution ROM rc2
Click to expand...
Click to collapse
I use it with Revolution Rom rc3 (MM not N!) Works like a charm.
JustChris20 said:
I use it with Revolution Rom rc3 (MM not N!) Works like a charm.
Click to expand...
Click to collapse
I prefer to use MM because of OTG and double tab to sleep + virtual sensor gyroscope which need xposed.
Ok, by the way i just wanted to report that it's not working on Revution ROM rc2 (Nougat)
I only get app auto-launch
JustChris20 said:
I prefer to use MM because of OTG and double tab to sleep + virtual sensor gyroscope which need xposed.
Click to expand...
Click to collapse
Hello
Installation rom revolution Mm to b160, is it good?
Chisetdel31260 said:
Hello
Installation rom revolution Mm to b160, is it good?
Click to expand...
Click to collapse
I also on B160 before, I installed the zip file with TWRP without wiping anything. All is fine. Don't mix up the download with revolution rom N RC3 in XDA!!!
JustChris20 said:
I also on B160 before, I installed the zip file with TWRP without wiping anything. All is fine. Don't mix up the download with revolution rom N RC3 in XDA!!!
Click to expand...
Click to collapse
Yes, thank you I had it before but I stopped at b130 rc1.
Therefore b160 + Rc3 Mm not problem ok
thank you
Original post here http://www.htcmania.com/showthread.php?t=1215453 :good:
I did the procedure, but all i got was auto-launch manager -_-
Johnny TDN said:
I did the procedure, but all i got was auto-launch manager -_-
Click to expand...
Click to collapse
Permission manager already active. After using some apps you will get a message from permission manager… ?
JustChris20 said:
Permission manager already active. After using some apps you will get a message from permission manager…
Click to expand...
Click to collapse
Still nothing.
Any help if possible?
I got auto launch manager.... Any way to remove it ??
HassanMirza01 said:
I got auto launch manager.... Any way to remove it ??
Click to expand...
Click to collapse
Same.