First off, upon trying to install the MindCr_Rom_v2.8 ROM on my Ace, installation went good. After installation went good and completed as it should. Got CWM already. when rebooting that's it phone got bricked. I cant go to Recovery or Download Mode, phone doesn't power on, when inserted USB cable for charging charging icon doesn't show up, NOTHINGis happening, any ideas, solutions please please please!
androlinu said:
First off, upon trying to install the MindCr_Rom_v2.8 ROM on my Ace, installation went good. After installation went good and completed as it should. Got CWM already. when rebooting that's it phone got bricked. I cant go to Recovery or Download Mode, phone doesn't power on, when inserted USB cable for charging charging icon doesn't show up, NOTHINGis happening, any ideas, solutions please please please!
Click to expand...
Click to collapse
I'm facing the same problem... from what i know after i asked some people in another forum they told me this rom MindCr_Rom_v2.8 ROM is for s5830i, that's why after reboot nth appear, i'm still looking for way to enter recovery mode... i m stuck as well... anyone can help????
Thanks
If you can enter download mode, flash a stock ROM via Odin.
If not, too bad, amigos
Sent from my pet - Megatron™
Did you install it using CWM or ROM Manager?
Never use ROM Manager on the Ace! If you did, your phone is hard-bricked.
My Samsung Glaxy S+ i9001 is not turning on, it just stays black. I've tried recovery mode, download mode, taking out and placing the battery back in, letting it rest, nothing works. If I get it to download mode I can fix it, but it just stays black. Its not that PHONE (!) COMPUTER thing that people unbrick or w/e, its just black. Nothing happens when I click any of the buttons, different combinations and such. It just stays black as if you are trying to turn on your phone without battery, nothing happens. How to fix this?
Georgi166 said:
My Samsung Glaxy S+ i9001 is not turning on, it just stays black. I've tried recovery mode, download mode, taking out and placing the battery back in, letting it rest, nothing works. If I get it to download mode I can fix it, but it just stays black. Its not that PHONE (!) COMPUTER thing that people unbrick or w/e, its just black. Nothing happens when I click any of the buttons, different combinations and such. It just stays black as if you are trying to turn on your phone without battery, nothing happens. How to fix this?
Click to expand...
Click to collapse
Even if there is nothing on the display , charge your phone for appr. 1 hour , then turn it on to download mode.
If this don't help , try:
-Buying an USB-JIG (got myself one , its such cool and really cheap for that what it does!)
-Buying a new battery for the phone.
I would prefer to buy an USB-JIG since it is really cheap and the chance by getting it back to life is quite high.
Georgi166 said:
My Samsung Glaxy S+ i9001 is not turning on, it just stays black. I've tried recovery mode, download mode, taking out and placing the battery back in, letting it rest, nothing works. If I get it to download mode I can fix it, but it just stays black. Its not that PHONE (!) COMPUTER thing that people unbrick or w/e, its just black. Nothing happens when I click any of the buttons, different combinations and such. It just stays black as if you are trying to turn on your phone without battery, nothing happens. How to fix this?
Click to expand...
Click to collapse
If you are sure your Battery is not dead and has been charged and has a charge, check your battery contacts to see they are clean and not oxidized and are firmly in contact with the contacts on your phone. (try shifting battery)
Final solution would be to use a JIG to get it into download mode..
BTW it is always better to mention what you did that brought about this situation, that is how we can analyse the problem.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
If you are sure your Battery is not dead and has been charged and has a charge, check your battery contacts to see they are clean and not oxidized and are firmly in contact with the contacts on your phone. (try shifting battery)
Final solution would be to use a JIG to get it into download mode..
BTW it is always better to mention what you did that brought about this situation, that is how we can analyse the problem.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
What is a USB-JIG? Will it work, I mean...the phone doesnt even do anything or show anything on the display, its just black without anything on it, like turned off and never turns on. What does the USB-JIG do? Where can I buy it? I cant even get into any mode, recovery or download, the phone doesnt even do anything when I press the buttons and stuff.
Georgi166 said:
What is a USB-JIG? Will it work, I mean...the phone doesnt even do anything or show anything on the display, its just black without anything on it, like turned off and never turns on. What does the USB-JIG do? Where can I buy it? I cant even get into any mode, recovery or download, the phone doesnt even do anything when I press the buttons and stuff.
Click to expand...
Click to collapse
Click this to buy
How to Make USB JIG
Where to Borrow a USB Jig
How it works watch this
But First check your battery
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
Click this to buy
How to Make USB JIG
Where to Borrow a USB Jig
How it works watch this
But First check your battery
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
How can I check it when there's no other phone that the battery will work on?
Georgi166 said:
How can I check it when there's no other phone that the battery will work on?
Click to expand...
Click to collapse
you can use volt meter to see how much power it has or try it on your friends or someone who has i9000 or i9001 phone and as mentioned earlier check it is in contact with your phone. But what did you do , before this problem ?? or what caused this problem??
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
you can use volt meter to see how much power it has or try it on your friends or someone who has i9000 or i9001 phone and as mentioned earlier check it is in contact with your phone. But what did you do , before this problem ?? or what caused this problem??
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I changed the recovery mode to Clockworkmod, then I installed gapps. I got stuck in a boot-loop so I wiped all dalvik cache and data and the other cache types, then I clicked on some bootloader thing, then the phone restarted and never started again.
Georgi166 said:
I changed the recovery mode to Clockworkmod, then I installed gapps. I got stuck in a boot-loop so I wiped all dalvik cache and data and the other cache types, then I clicked on some bootloader thing, then the phone restarted and never started again.
Click to expand...
Click to collapse
ok, the bootloader thing you clicked caused this problem, so your battery is good and your only option is to use USB JIG, buy or borrow one and you should be able to get into download mode to flash a i9001 Stock ROM with AriesVE.ops using Odin 4.43
Never mess with bootloader:fingers-crossed:
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
ok, the bootloader thing you clicked caused this problem, so your battery is good and your only option is to use USB JIG, buy or borrow one and you should be able to get into download mode to flash a i9001 Stock ROM with AriesVE.ops using Odin 4.43
Never mess with bootloader:fingers-crossed:
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I've sent a few PM's to people in my town using the thing you provided me, thanks a lot! You gave me some hope to fix it, I'll eventually borrow one if I get a response or I'll buy one, sadly it will be delivered in around 1 month, so I might just send it to service if I dont borrow.
Georgi166 said:
I've sent a few PM's to people in my town using the thing you provided me, thanks a lot! You gave me some hope to fix it, I'll eventually borrow one if I get a response or I'll buy one, sadly it will be delivered in around 1 month, so I might just send it to service if I dont borrow.
Click to expand...
Click to collapse
one month? sorry to hear that, In any case you should follow your i9001 WIKI to know how to do things on your unit and also this to get stock ROMS
good luck
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
one month? sorry to hear that, In any case you should follow your i9001 WIKI to know how to do things on your unit and also this to get stock ROMS
good luck
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I have already rooted it twice on 2 different Cyanogenmod's , 10.1 and yesterday I tried 10.2. Everything was fine, only GApps would not install properly. So I installed Clockworkmod, installed it without any problems, clicked on that boot thing, the phone rebooted and no more started.
Georgi166 said:
I have already rooted it twice on 2 different Cyanogenmod's , 10.1 and yesterday I tried 10.2. Everything was fine, only GApps would not install properly. So I installed Clockworkmod, installed it without any problems, clicked on that boot thing, the phone rebooted and no more started.
Click to expand...
Click to collapse
For download mode, you have to buy 3 resistors of 100k ohms each (or any other combination which makes total 300k ohms) and connect them in series.
Cut an USB cable or charger pin from the phone end. Connect the resistors in between pin no.4 ( which is not connected to any of the wire in USB cable) and pin5.
The below link will help you to understand better :
galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
I would like to recommend you to download official JVU pack and flash using Odin. The best way around if you can go to download mode.
Hello developers,
A few hours ago a friend of mine gave me a Samsung Galaxy S I9000 which doesn't boot. He tried flashing a Custom ROM via Heimdall and flashed the kernel first.
Since then it is stuck on the splashscreen saying "Galaxy S GT-I9000 Samsung" and it seems to be restarting every few seconds. I cannot access anything on the phone, neither Download Mode nor the Recovery. I have tried *every* possible combination to accomplish that. The phone doesn't vibrate when turned on (I think it should) and it is not possible to turn it off using the power button, which is why I have to remove the battery for that. The bootloop is somehow weird, since it does not boot the OS itself. The screen flashes unperiodically, once the Samsung Logo is visible for about 1 second before it turns off and then again for a little longer, about 3 seconds. Between that the screen doesn't seem to be turned on (or isn't simply showing anything) and blacked out for also an unperiodical amount of time.
When turned off and connected to a PC or the wall charger it shows a little circle that seems to indicate loading. Sadly on this Galaxy S it doesn't move, which is why I suppose it is not doing anything. It is btw not recognized by the computer at all, neither ADB or Odin or Heimdall.
I hope that you can help me somehow.
Regards,
error0x0000034
error0x0000034 said:
I hope that you can help me somehow.
Click to expand...
Click to collapse
Try for download mode solutions as mentioned in
[Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Try for download mode solutions as mentioned in
[Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thank you very much for your answer. I will have a look at this and will provide feedback if it worked later.
Hello, I have the EXACT same problem with exact same model, the hard reset doesn't work either and the screen keeps flasing in a loop, the only way to stop it is to take the battery out... Have you managed to solve the problem???
Same thing!!
anyone has any solutions?? please help!!
Use jig
hi,i have i9000 in my hand with a problem of not stay in download mode and go to recovery after put in download mode just after 5 seconds,
history is someone flashed it with anycall rom and afterthat it stuck at logo everytime and when i wipe it cache and factory then it is power up normally but just for one time,
now i cant flashed it bcoz it cant stay in download mode and immediately go to recovery,
in recovery also shows the
E:internal mmc pen fail
E:lfs pass open fail
how to fix it and back to original i9000 stock rom?
waiting and searching for this issue long time and find this link below for korean galaxy s,
http://forum.xda-developers.com/showthread.php?t=2573023
with the given details i do the first step and it fail at end on half way loading bar on downloading mode,
now device is restarting at samsung anycall logo randomly,
can some one help me to fix this issue?
zeeshantayyab said:
can some one help me to fix this issue?
Click to expand...
Click to collapse
Do it again after battery pull and fresh Odin after reboot PC. If it get stuck after stage one, skip 2 & 3, proceed to stage 4.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Do it again after battery pull and fresh Odin after reboot PC. If it get stuck after stage one, skip 2 & 3, proceed to stage 4.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
mobile is power up now in working condition except memory(internal),its corrupted,
any idea to fix it?
zeeshantayyab said:
mobile is power up now in working condition except memory(internal),its corrupted,
any idea to fix it?
Click to expand...
Click to collapse
Look in My Directory (yellow Pages) in SD cards section about it.
Check this out! Links to useful Guides and " Banned " Documentaries
I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you
You can unbrick your device by using Odin.
Follow this guide here to unbrick your phone whether it's hard or soft bricked.
You can download your stock ROM from this site.
Also Odin available here.
Goodluck.
XDHx86 said:
You can unbrick your device by using Odin.
Follow this guide here to unbrick your phone whether it's hard or soft bricked.
You can download your stock ROM from this site.
Also Odin available here.
Goodluck.
Click to expand...
Click to collapse
sir samsung j6+ has a not removable battery do you have any other ways?
computerxrojas1995 said:
sir samsung j6+ has a not removable battery do you have any other ways?
Click to expand...
Click to collapse
Simply disconnect your device and turn it off then wait couple of minutes (10 minutes at least) to remove residual charge.