Database Develop

[Q] Is my HTC One rooted?

Hello,
I just bought HTC One (in retail, without operator logo). I just noticed following in my Kernel information :
3.4.10-gb91aaea
[email protected] #1
SMP PREEMPT
Does this mean that device is rooted? I noticed Vodafone logo when turning on device. Everything works fine, I just want to be sure that my device will be able to receive all updates from HTC and not be locked.
Thanks in advance for answer.

Nope it isn't. Try the Root Checker app in the Play Store to confirm

Check CID using CID getter from play store. So that you can know from will u get the updates.
Sent from my iPad using Tapatalk HD

Thanks for answers. Just one more question : Can I install stock HTC WWE ROM on my device? To remove this Vodafon stuff and have clean stock ROM?
Thanks again,

You'd have to unlock your bootloader and a custom recovery would needed too, then you're free to install any roms
Sent from my HTC One using xda app-developers app

kurby said:
You'd have to unlock your bootloader and a custom recovery would needed too, then you're free to install any roms
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
To the OP you have to do what kurby suggested but remember that you cannot use any RUU except the Vodafone one. If however you are just wanting to install the actual ROM then you can do it after unlocking the bootloader and flashing a custom recovery.

Thanks guys. Can you please clarify this a little bit more as I'm new to this : You say that if I want to install original HTC WWE ROM instead of Vodafon version, I must unlock bootloader and then find RUU from Vodafone? Is that right? Do you maybe have a link for a RUU for Vodafone version of HTC One?

You can only install RUU to the same CID region. Looks like your phone is not a retail non branded phone. You will not able to get updates from HTC even with the stock rom installed because it will check if the CID is the same region. You can unlock bootload, install a custom recovery then can flash any custom rom but not RUU.
Sent from my HTC One using xda app-developers app

damird said:
Thanks guys. Can you please clarify this a little bit more as I'm new to this : You say that if I want to install original HTC WWE ROM instead of Vodafon version, I must unlock bootloader and then find RUU from Vodafone? Is that right? Do you maybe have a link for a RUU for Vodafone version of HTC One?
Click to expand...
Click to collapse
As mentioned before RUU is CID specific. So if your CID is not in the list of the RUU, the RUU won't flash your phone. For example if I have a Vodafone branded HTC One and I want to debrand it to get rid of the Vodafone stuff that's installed on my HTC One. I simply can't just use the stock 1.29.401.16 UK RUU because the CID list for the UK ROM(RUU) are as follows:
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__A07
cidnum: HTC__J15
cidnum: HTC__016
Now if my Vodafone branded HTC One has a CID for example VODA001, then when I try to run the 1.29.401.16 RUU it will fail. Because my CID is not in that list. But if you unlock the bootloader and flash a custom recovery and then flash this stock ROM that mike1986. posted http://forum.xda-developers.com/showthread.php?t=2224752 that will work.
But bear in mind just because you have used that stock ROM that mike1986. posted it doesn't mean you can install OTA updates from that region. Because the next update for example is 1.29.401.20 the OTA will look for the CID in the list I posted. And since your CID is techinically still VODA001 the OTA update will not install.
Now when we are able to change the CID on the HTC One then you can use any RUU you wish as long as you have a matching CID or a SuperCID.

Thanks very much guys! I understand now.

[Q] Do I have to change MID modelID?

So, just a quick question. My model ID is PN0710000 and if I want to go to Developer Edition ROM do I need to change it to PN0712000 or it will work with my MID too. I am S-Off and unlocked bootloader.

what is the difference between cid: htc__001 and cid: BS_US001 ?

hi
i am want ask if i install rom cid: htc__001 on this device cid: BS_US001 will be work or she is don't compatible ?

P.R.F.S said:
hi
i am want ask if i install rom cid: htc__001 on this device cid: BS_US001 will be work or she is don't compatible ?
Click to expand...
Click to collapse
Fist of all, no need to start another thread for this, you should have posted this HERE
And the answer is NO. If you want to flash a HTC__001/PN0710000 rom you need the same CID and MID of the rom
CID mean Carrier ID and sometime called Cell ID or Country ID, its basically a kind of carrier lock / region lock.
so your phone have BS_US001 CID and PN0712000 MID, that mean it software (.1540 base) is intended for US market (brightstar us developer edition) and compatible for Model PN0712000
HTC__001 is for EMEA region (EUROPE, MIDLE EAST and AFRICA) and its sw base is .401 and compatible with model PN0710000
The only way to install a rom with different CID/MID is the achieve S-OFF and then modify your CID and MID.
BTW all those informations can easily be found on this forum if you search a little. Here are some threads you should take a look at:
http://forum.xda-developers.com/showthread.php?t=2223236
http://forum.xda-developers.com/showthread.php?t=2535365
http://forum.xda-developers.com/showthread.php?t=2541082

[Q] HTC one change mid back to t-mobile PN0713000

I have an htc one, I changed the cid and mid to Dev Edition - CID: HTC__001 and MID: PN0712000. I updated firmware for 4.4 thru fast boot using an international custom fastboot. I want to change back to stock T-Mobile CID: T-MOB010 and MID: PN0713000 so I can flash stock tmobile firmware to update 4.4.2. I'm able to change cid to T-MOB010 but I cannot change mid to PN013000. Can someone please help!!!

sch-i760 said:
I have an htc one, I changed the cid and mid to Dev Edition - CID: HTC__001 and MID: PN0712000. I updated firmware for 4.4 thru fast boot using an international custom fastboot. I want to change back to stock T-Mobile CID: T-MOB010 and MID: PN0713000 so I can flash stock tmobile firmware to update 4.4.2. I'm able to change cid to T-MOB010 but I cannot change mid to PN013000. Can someone please help!!!
Click to expand...
Click to collapse
If you have S-OFF, then follow this link to change your mid:
http://forum.xda-developers.com/showthread.php?t=2535365

thanx it helped me change mid but??
thanx it helped me change mid but even though it corrected mid to PN071300 and my cid is T-MOB010. im not able to udate the firmware through a tmobile ruu. I run the ruu it says error55 unknown error. please get correct rom utility.

sch-i760 said:
thanx it helped me change mid but even though it corrected mid to PN071300 and my cid is T-MOB010. im not able to udate the firmware through a tmobile ruu. I run the ruu it says error55 unknown error. please get correct rom utility.
Click to expand...
Click to collapse
please post your fastboot getvar all minus imei/sn and post a link to the ruu you are trying to install.

[Q] M7 Model - MID - CID relation

I would like to know what is the relation of Model & MID and CID?
My issue is that I have a Asia HK edition of M7 (M7_UL) with a CID of HTC__622 and a MID of PN0714, but I do not get any sense of their relation to each other. I do understand that M7_UL determines my hardware? But then why the MID?
I unlocked my bootloader in hope that i can flash other stock rom to get rid of the HK version and have some WWE, but since I do not have S-OFF (hboot 1.57) i could not change my CID or MID to be able to flash a WWE. And since there is only payware (sunshine) to get S-OFF now, i would like to be sure if my idea would work to move from HK to WWE without loosing functionality or bricking my device (I'm from Europe).
Thanks for any HOWTOs and TIPs, advices!

Srage87 said:
I would like to know what is the relation of Model & MID and CID?
My issue is that I have a Asia HK edition of M7 (M7_UL) with a CID of HTC__622 and a MID of PN0714, but I do not get any sense of their relation to each other. I do understand that M7_UL determines my hardware? But then why the MID?
I unlocked my bootloader in hope that i can flash other stock rom to get rid of the HK version and have some WWE, but since I do not have S-OFF (hboot 1.57) i could not change my CID or MID to be able to flash a WWE. And since there is only payware (sunshine) to get S-OFF now, i would like to be sure if my idea would work to move from HK to WWE without loosing functionality or bricking my device (I'm from Europe).
Thanks for any HOWTOs and TIPs, advices!
Click to expand...
Click to collapse
MID is the model number. All M7_UL have MID starting with PN071 have the same internals
PN0710000 for WWE version
PN0712000 for Dev edition, GPE edition, AT&T/Rogers
PN0714000 for Asia/HongKong version
The only exception is PN0711000 which is a M7_U (without LTE) and have a different modem.
With s-off you can change your MID from PN0714000 to PN0710000, your CID from HTC__622 to HTC__001 and flash a x.xx.401.x RUU so your phone will be converted to stock european WWE version.