Database Develop

Sprint galaxy tab ics help

I have been looking for two days now for how to get ics on my sprint tab. I see people have it and I have tried to flash it and failed.I read it may be because I have an older cwm. 4.09 or something like that. I want to get ics on here sooooo bad. I very experienced with flashing roms and rooting and all the goodies so I don't need anyone to hold my hand but some links on how to do it or what ill need to do it would be amazing. I can't figure out how to get newer cwm and ics. Help and links would be amazing thank you
Sent from my SPH-P100 using XDA App

you could try here
it works for me.

I looked at that one and tried to flash it but every time I try to flash it says installation aborted from what I gather its because I have a old version of cwm. What version r u on?
Sent from my SPH-P100 using XDA App

post 380 on page 38 of that thread gives the link to the right cwm version and instructions for install.

fabs109 said:
I have been looking for two days now for how to get ics on my sprint tab. I see people have it and I have tried to flash it and failed.I read it may be because I have an older cwm. 4.09 or something like that. I want to get ics on here sooooo bad. I very experienced with flashing roms and rooting and all the goodies so I don't need anyone to hold my hand but some links on how to do it or what ill need to do it would be amazing. I can't figure out how to get newer cwm and ics. Help and links would be amazing thank you
Sent from my SPH-P100 using XDA App
Click to expand...
Click to collapse
I think the humberos kernel have the new cwm. After you flash the kernel you can flash the kang or slims ics!!!!they are really great!!!
Hope i can help you........

Rickxx thank you so much! I'm on ics on my tab it is amazing honestly thank you so much for pointing me in the right direction its like a new tablet.was so sick of it now I can't put it down thanks again man
rickxx2000 said:
post 380 on page 38 of that thread gives the link to the right cwm version and instructions for install.
Click to expand...
Click to collapse
Sent from my SCH-I800 using XDA App

Just to verify the link above on pg 38 post 380 does give the right way to do it. I had never used heimdal I always use Odin and I couldn't get heimdal to work for a couple hours so I gave up and said screw it and ran the tar through Odin and it worked! My screen did goofy stuff but all I had to do was boot into the new recovery and wipe 3 times each data and cache and delvik then flash team hacksun then flashed patch then rebooted and then went back into recovery and flashed gapps.
I swear this tablet was made for ics it never ran this well. A whole new tab is a understatement. Thanks to all the devs and rickxx for guiding the way
Sent from my SCH-I800 using XDA App

Yessss.im excited to get this also.arevyou able to use all the functions? THANK YOU SO MUCH
Sent from my SPH-P100 using XDA App

Get silent camera to make the camera work u can get it from market. But I haven't had any other problems it honestly works better than ever
Sent from my SCH-I800 using XDA App

Which rom did you flash?i literally fixing to do it now.just dont want any issues.wifi is okay? Thanx buddy
Sent from my SPH-P100 using XDA App
---------- Post added at 05:05 AM ---------- Previous post was at 04:51 AM ----------
if i use odin wheredo i put this file for cwm5
---------- Post added at 05:30 AM ---------- Previous post was at 05:05 AM ----------
im using an old laptop running xp.Dont askwhy!!! lol how can i get drivers so I can use odin? Im stuck!!Help.....
---------- Post added at 06:04 AM ---------- Previous post was at 05:30 AM ----------
got cwm5 now how the heck do igetthe files on the sdcard.It wont let me unlock the screen.smh...testing my patience.lol

Sorry for all the questions.lol got it all worked out. So which ice is the best one out so far and whatsw the ugly keyboard
Sent from my SCH-I800 using XDA App

rjumawan said:
Which rom did you flash?i literally fixing to do it now.just dont want any issues.wifi is okay? Thanx buddy
Everything including wifi works u will need silent camera from market for camera to work. The from is the one from link above
---------- Post added at 05:05 AM ---------- Previous post was at 04:51 AM ----------
[/COLOR]if i use odin wheredo i put this file for cwm5.
Put the tar in pda
---------- Post added at 05:30 AM ---------- Previous post was at 05:05 AM ----------
im using an old laptop running xp.Dont askwhy!!! lol how can i get drivers so I can use odin? Im stuck!!Help.....
Just download Odin from the same place you rooted your tablet and drivers u should have from rooting as well
---------- Post added at 06:04 AM ---------- Previous post was at 05:30 AM ----------
got cwm5 now how the heck do igetthe files on the sdcard.It wont let me unlock the screen.smh...testing my patience.lol
Click to expand...
Click to collapse
Lol I had the same problem just hold power button til tablet shuts off and boot into rocovery /volume up and power and your golden
Sent from my SCH-I800 using XDA App

Use the rom that rickxxx posted link to. Idk what u r talking bout ugly keyboard. Ics keyboard?
Sent from my SCH-I800 using XDA App

What kind of apps are you running that are for ics only
Sent from my SCH-I800 using XDA App

google chrome browser is about it
Sent from my SCH-I800 using XDA App

Yo fabs.are you running the kernal that was posted along w ics.I just ran rom and gaps.but battery life sucks balls.lol
Sent from my SCH-I800 using XDA App

Know what i didnt flash kernal. Im at 1day 7hrs and 9 mins on my tablet right now and ive been playing with it alot. I play on it more then my phone now it runs amazing. Whats you battery life like. How ling are u getting without charge
Sent from my Galaxy S II Epic Touch 4g using XDA App

Well somethjng was draining it so I wiped and reflash.so far so good.can't stand that the camers doesn't work.silent photo pics look like crap.going to hunt for another ics rom.
Sent from my SCH-I800 using XDA App

I'm a total noob. Wish I could find a good set of instructions that list from start to finish how to do this. Searching seems to bring up a million different methods and I'm completely confused :-(

The 2nd and forth post literlly walk you fhrough it.cant get easier than that.
Sent from my SCH-I800 using XDA App

Phone bricked after update to GingerDX 0.29

Hi,
I just tried to update to GingerDX 0.29 and all the files were installed but when I rebooted my phone it gets stuck at the SE logo.
Please help ASAP.
I need a quick answer due to having a game server that I have to keep control of from my phone.

Download flashtool,download stock rom(.ftf),flash stock rom with flashtool,done.
Or fix it with pccompanion,done.
For links SEARCH.
Sent from my X8 using xda premium
---------- Post added at 10:08 PM ---------- Previous post was at 10:06 PM ----------
Maybe you can access cwm,if so, do full wipe-factory reset,wipe dalvik and reflash the rom.
Sent from my X8 using xda premium

Thanks, My phone is back to a working order and now I can mess it up again

doubts about recovery

when i install rom manager, download and flash droid 3 recovery, why doesn't work? can look idiot, but i don't like safestrap because i can't flash any rom over stock. when i look at this, i see the stock that remains there like a loss of storage space.
i wanna flash roms over the others. like i've always done with my other phones.
so, could somebody help me pleeease! with links, tips, etc .. thanks!

I believe you need to install and run droid 3 bootstrap, before using rom manager
---------- Post added at 04:04 PM ---------- Previous post was at 03:51 PM ----------
watch http://youtu.be/AUu4q3DKd6s

so, now i'm using milestone 3 bootstrap, modified by junior passos (0.83 from hashcode, if i'm not wrong). i've tried droid 3 bootstrap too (one with red icon). both works.
more one question: there is anyway of remove stock after a new rom flashed on slot-1/flash a new rom over stock, via safestrap 3.x?
Sent from my XT860 using xda app-developers app

not that I'm aware of

Wait for safestrap 3.1 to flash over stock.
Sent from my DROID3 using xda app-developers app

sd_shadow:
not that I'm aware of
Click to expand...
Click to collapse
too bad.
Own Demon:
Wait for safestrap 3.1 to flash over stock.
Click to expand...
Click to collapse
i'm waiting anxiously.

[Q] Possibly Bricked Stock ROM??

Hey all,
Got sort of an odd problem. I recently upgraded my Droid 4 with the Jelly Bean OTA update, and it was running great. But today, I ran across 1% Battery Mod for JB users (located at the link below), and thought I'd try it. But, I think I misread it. Looks like it's for a "Leaked" OTA, which I'm guessing is different from the official one...whoops
http://forum.xda-developers.com/showthread.php?t=2132420
Stupid me, I flashed it over the stock ROM using Safestrap 3.11, and got a boot animation loop (constant red Droid Eye - no boot). Well, I did make a backup of the stock ROM before I flashed it, and figured I could just restore it. But, when I did, it still wouldn't boot. Just a blank black screen...not good
I'm guessing Safestrap isn't meant to be used like that. But anyway, I actually tried restoring the same backup that I made of the Stock ROM to a ROM Slot, and wouldn't you know it, it worked. It booted up fine and I can use it. I'm glad I'm not screwed in that regard, but anyway I was wondering if there's a way I can fix the Stock ROM slot. I'm not too terribly worried since I can use the ROM slot that I created, but just wanted to know.
Am I gonna have to wait for the fastboot files to come out? Thanks in advance.

xml AP fastboot file has been found see http://sbf.droid-developers.org/cdma_maserati/list.php
if you just want to restore your stock rom slot use my nandroid
Jellybean stock safestrap 3.11 nandroid (for stock slot)
system version 98.72.18.XT894.Verizon.en.US
http://d-h.st/g3c 478.95 MB
place unziped folder in internal sdcard/TRWP/BACKUPS then restore in safestrap 3.11

Don't try to restore ICS from jb though, you'll permabrick the phone if I'm not mistaken.... someone correct me if I'm wrong though
Sent from my DROID4 using xda app-developers app

right but I'm not writing about ics,
nandroid is jb, and jb xml has been found
Sent from my Clear using xda premium

Oh it has? Awesome! I haven't browsed the rest of the D4 forums yet, making my way down the list as we speak
Sent from my DROID4 using xda app-developers app

sd_shadow said:
xml AP fastboot file has been found see http://sbf.droid-developers.org/cdma_maserati/list.php
if you just want to restore your stock rom slot use my nandroid
Jellybean stock safestrap 3.11 nandroid (for stock slot)
system version 98.72.18.XT894.Verizon.en.US
http://d-h.st/g3c 478.95 MB
place unziped folder in internal sdcard/TRWP/BACKUPS then restore in safestrap 3.11
Click to expand...
Click to collapse
O.O ...Wow! You're awesome my man. Thank you very much! Your nandroid backup worked great. Saved me a lot of trouble. Is that a backup that you created? I was just wondering why my backups wouldn't restore.
alex94kumar said:
Don't try to restore ICS from jb though, you'll permabrick the phone if I'm not mistaken.... someone correct me if I'm wrong though
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I was pretty sure of that too. Thanks for the clarification.
Wow, I didn't know that the jb xml was found already, either. I guess I didn't look hard enough. Just for future reference, if I needed to flash it, how would I go about doing it? Would I need to use RSD Lite? And is it just self explainatory? I've used the ICS Utility once, and I'm assuming that RSD Lite is similar. Thanks again guys.

there is a jb utility out now
http://forum.xda-developers.com/showthread.php?p=39575917
[SCRIPT] DROID 4 Utility XT894 Jellybean -- Windows + Mac + Linux (All In One!)
and rsd lite flashing instructions in my list
sd_shadow's [Collection] of Links for Droid 4
Sent from my Clear using xda premium
---------- Post added at 08:40 AM ---------- Previous post was at 08:35 AM ----------
and yes nandroid, was made on my phone, not sure why yours didn't work
made right after installing safestrap, nothing else installed or removed
Sent from my Clear using xda premium

sd_shadow said:
there is a jb utility out now
http://forum.xda-developers.com/showthread.php?p=39575917
[SCRIPT] DROID 4 Utility XT894 Jellybean -- Windows + Mac + Linux (All In One!)
and rsd lite flashing instructions in my list
sd_shadow's [Collection] of Links for Droid 4
Sent from my Clear using xda premium
---------- Post added at 08:40 AM ---------- Previous post was at 08:35 AM ----------
and yes nandroid, was made on my phone, not sure why yours didn't work
made right after installing safestrap, nothing else installed or removed
Sent from my Clear using xda premium
Click to expand...
Click to collapse
Oh, good stuff! That's good to know, thanks.
And hmm. Maybe it just didn't like something that I had installed or whatever. Well anyway thanks again

Cannot update past 890!! Please help!

I just bought a Droid 3 to play around with...I have tried everything I know to update past 890...flashed update.zip in recoveries stock and custom...tried using about phone/software updates...does anyone know an easy way to do this? Is there a way to flash 906 fastboot or rsd?
Sent from my SCH-I535 using xda premium

yes couple of options in my list under d3
use 906 xml with rsd lite or the one click 906 sbf
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs....
Sent from my XT862 using xda premium
---------- Post added at 11:41 AM ---------- Previous post was at 11:39 AM ----------
edited again:
sd_shadow's [Collection] of Links for: Droid 3 (XT862)
Sent from my XT862 using xda premium