Database Develop

[Q] htc 802w s-off

is there another way to s-off the htc one (802w unicom)
i've tried revone but when i type ./revone -P (the s-off command)
it says unsuccessful
error ...
please advise

Majdsardini said:
is there another way to s-off the htc one (802w unicom)
i've tried revone but when i type ./revone -P (the s-off command)
it says unsuccessful
error ...
please advise
Click to expand...
Click to collapse
Hey, what error do you get??
./revone -P is just for making device ready for sOFF not for getting sOFF

prunzzz said:
Hey, what error do you get??
./revone -P is just for making device ready for sOFF not for getting sOFF
Click to expand...
Click to collapse
solved it
revone does't support this variant
i used moonshine and now i'm S-OFF

Majdsardini said:
solved it
revone does't support this variant
i used moonshine and now i'm S-OFF
Click to expand...
Click to collapse
I also have 802w but I didnt do s-off with revone. can you send me which version did you use of moonshine?

Can I install a Google Edition RUU in a HTC Developer Edition device?

I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards

only if your s-off

Victor Potasso said:
I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards
Click to expand...
Click to collapse
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help

alray said:
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help
Click to expand...
Click to collapse
Can I set my device to s-off?

Victor Potasso said:
Can I set my device to s-off?
Click to expand...
Click to collapse
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
First you need to be S-Off, this will NOT work with S-On!!!
A) If you’re on hboot 1.44 use revone to get S-Off: http://forum.xda-developers.com/show....php?t=2314582
B) If you’re on hboot 1.54/1.55 use rumrunner to get S-Off: http://rumrunner.us/ and http://forum.xda-developers.com/show....php?t=2487888
Click to expand...
Click to collapse
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820

alray said:
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820
Click to expand...
Click to collapse
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID

Victor Potasso said:
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID
Click to expand...
Click to collapse
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.

alray said:
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.
Click to expand...
Click to collapse
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate

Victor Potasso said:
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate
Click to expand...
Click to collapse
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.

swag1981 said:
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.
Click to expand...
Click to collapse
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards

Victor Potasso said:
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards
Click to expand...
Click to collapse
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.

swag1981 said:
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.
Click to expand...
Click to collapse
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:

Victor Potasso said:
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:
Click to expand...
Click to collapse
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk

Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
Cheers

Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
:cheers:

Give this site a read over too when you get a chance http://www.htc1guru.com/downloads/
Sent from my HTC One using Tapatalk

swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.

swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I just tried run this .exe but I got this error http://imgur.com/rYvIdBd
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe but my current ROM is Android 4.3 version 3.22.1540.1. I suppose I got this error because I tried to install a oldest version in my device. Does it make any ****ing sense?
I'm downloading the .exe for 3.22.1540.1 and than try to install it.
Regards

alray said:
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.
Click to expand...
Click to collapse
Yep, my device has MID as PN0712000 and CID BS_US001
I tried run RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe from HTC1GURU byt i got this error http://imgur.com/rYvIdBd
My current software version is 3.22.1540.1.

@alray and @swag1981
I followed this thread http://forum.xda-developers.com/showthread.php?p=46046898
If I have a hboot S-ON it has to be LOCKED or RE-LOCKED. It'll never work with hboot UNLOCK. So if your hboot is S-OFF it not matter.
Thank u mates. You were friggin' awesome.
Regards

S-off on AHRD 4.4 Sense Edition

So, i was using AHRD GPE 4.3 and the bulletproof kernel for months and it worked perfectly, so i wanted to upgrade to the 4.4 version.
Unfortunately i flashed the Sense edition instead of the GPe.
I am now on Android 4.4, HBOOT 1.44, S-ON and unlocked bootloader trough htcdev.
I tried revone v0.2.1 via cmd myself and via the htc toolkit but i always get the
Code:
adb shell /data/local/tmp/./revone -P
revone v0.2.1
revone failed (error code = 1)
error.
Does revone work with 4.4 or do i have to use a 4.3 or 4.2.2 based rom?
adb devices in cmd lists my phone so i don't know what the problem could be except incompatibility.

Ashratt said:
So, i was using AHRD GPE 4.3 and the bulletproof kernel for months and it worked perfectly, so i wanted to upgrade to the 4.4 version.
Unfortunately i flashed the Sense edition instead of the GPe.
I am now on Android 4.4, HBOOT 1.44, S-ON and unlocked bootloader trough htcdev.
I tried revone v0.2.1 via cmd myself and via the htc toolkit but i always get the
Code:
adb shell /data/local/tmp/./revone -P
revone v0.2.1
revone failed (error code = 1)
error.
Does revone work with 4.4 or do i have to use a 4.3 or 4.2.2 based rom?
adb devices in cmd lists my phone so i don't know what the problem could be except incompatibility.
Click to expand...
Click to collapse
1- Does revone work with 4.4 or do i have to use a 4.3 or 4.2.2 based rom? <- no
2- date of bootloader?

nkk71 said:
2- date of bootloader?
Click to expand...
Click to collapse
May 3 2013; too old i guess?

nkk71 said:
1- Does revone work with 4.4 or do i have to use a 4.3 or 4.2.2 based rom? <- no
2- date of bootloader?
Click to expand...
Click to collapse
Use rumrunner to s-off, it works on hboot 1.44 too
Sent from my iPod touch using Tapatalk

n1234d said:
Use rumrunner to s-off, it works on hboot 1.44 too
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
ok will try, i was under the impression that rumrunner should be only used with hboot > 1.44

Ashratt said:
ok will try, i was under the impression that rumrunner should be only used with hboot > 1.44
Click to expand...
Click to collapse
incoming PM....
---------- Post added at 08:02 PM ---------- Previous post was at 07:58 PM ----------
Ashratt said:
May 3 2013; too old i guess?
Click to expand...
Click to collapse
no, on the contrary, check your PM.

Ashratt said:
ok will try, i was under the impression that rumrunner should be only used with hboot > 1.44
Click to expand...
Click to collapse
1- did you try rumrunner by any chance?
2- can you reflash the ROM i sent you, and go through the revone procedure again, but copy/paste the full command prompt from a to z.
i'm still checking a few other things, but if you can do that in the meantime.

I never tried rumrunner but good news everyone;
after reflashing the rom revone (did it via htc toolkit) worked and shows s-off in bootloader (although version-main: is still blank)

Code:
C:\Android>fastboot getvar all
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
[B](bootloader) version-main:[/B] :confused::mad::confused::mad:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
finished. total time: 0.047s
i'm gonna leave these here (so i dont need to look for them again ), until you come back with the output from above post.
http://www.htc1guru.com/dld/ota_m7_...-7_release_315813_signedoj2qp335qmm8qjso-zip/
http://www.htc1guru.com/dld/ota_m7_..._p_release_325133_signedlqk8p6c09r7kmir2-zip/
http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/
http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-vodap102-1-29-161-7-7z/
---------- Post added at 07:13 PM ---------- Previous post was at 07:11 PM ----------
Ashratt said:
I never tried rumrunner but goon news everyone;
after reflashing the rom revone (did it via htc toolkit) worked and shows s-off in bootloader (although version-main: is still blank)
Click to expand...
Click to collapse
oh just saw that :laugh:
:good::good:
now you're good to flash anything you like
if all good, could you edit main thread title to include [SOLVED], thanks

nkk71 said:
oh just saw that :laugh:
:good::good:
now you're good to flash anything you like
if all good, could you edit main thread title to include [SOLVED], thanks
Click to expand...
Click to collapse
Thanks again for your help :good:
Can i post your link to the ARHD rom in the OP?
(man those captchas are killing me)

Ashratt said:
Thanks again or your help :good:
Click to expand...
Click to collapse
No problem.
Ashratt said:
Can i post your link to the ARHD rom in the OP?
Click to expand...
Click to collapse
I'll ask @mike1986. don't post before I get OK from him, please.

[Q] Trying to Unroot [Problems]

I am trying to unroot my HTC One but keep running into various issues. My phone is rooted, S-On, TWRP, Hboot 1.44.0000
I have tried Moonshine and RumRunner and got the same issue where it told me to fix it (followed every step, have Win drivers and Sync Mgr uninstalled)
Tried the revone method displayed here (http://forum.xda-developers.com/showthread.php?t=2314582) and each time I get to the step "./revone -l(-s 0)" I get the error "...Segmentation Fault (Core Dumped) 139 :[email protected]:/data/local/tmp $"
I am running the stock rom (received at http://forum.xda-developers.com/showthread.php?t=2348502)
Any thoughts or ideas? I am at my wit's end. It seems everything I try with this phone lends to an error. Friend said I might not have SuperUser. Don't know why I wouldn't. But if that's the case, how do I get SuperUser when I'm rooted and S-On?

thesk8rguitarist said:
I am trying to unroot my HTC One but keep running into various issues. My phone is rooted, S-On, TWRP, Hboot 1.44.0000
Click to expand...
Click to collapse
date of bootloader?

nkk71 said:
date of bootloader?
Click to expand...
Click to collapse
July 5th 2013

thesk8rguitarist said:
July 5th 2013
Click to expand...
Click to collapse
that's a patched hboot (ATT or T-MO), check here for downgrade instruction to get s-off using revone: http://forum.xda-developers.com/showthread.php?t=2431515

nkk71 said:
that's a patched hboot (ATT or T-MO), check here for downgrade instruction to get s-off using revone: http://forum.xda-developers.com/showthread.php?t=2431515
Click to expand...
Click to collapse
While trying Rumrunner I get to the step where I type "fastboot devices" in my cmd window and it never pulls anything up. Running windows 8 with all drivers properly installed/updated. Fastboot devices recognizes myphone on my mac, but I haven't seen a revone for Mac. On the PC, adb devices yields my sn, but not fastboot devices. Am I doing something wrong? Using factory installed cable, HTC Sync Manager is uninstalled (drivers remain) Fastboot is unchecked while USB Debug is checked, rebooted phone into bootloader and selected fastboot to make sure computer identifies it (phone DOES say Fastboot USB).

thesk8rguitarist said:
While trying Rumrunner I get to the step where I type "fastboot devices" in my cmd window and it never pulls anything up. Running windows 8 with all drivers properly installed/updated. Fastboot devices recognizes myphone on my mac, but I haven't seen a revone for Mac. On the PC, adb devices yields my sn, but not fastboot devices. Am I doing something wrong? Using factory installed cable, HTC Sync Manager is uninstalled (drivers remain) Fastboot is unchecked while USB Debug is checked, rebooted phone into bootloader and selected fastboot to make sure computer identifies it (phone DOES say Fastboot USB).
Click to expand...
Click to collapse
i thought you were on hboot 1.44, but patched, so you needed the link i posted earlier to downgrade, then use revone to get s-off

I gotcha. My apologies. Trying that now.
Sent from my HTC One 801e using xda app-developers app

thesk8rguitarist said:
Fastboot devices recognizes myphone on my mac, but I haven't seen a revone for Mac.
Click to expand...
Click to collapse
Revone runs on your phone, not your PC. How you get it into your phone doesn't matter, you just need to run it. You can run it from your phone in a terminal if you wish.

thesk8rguitarist said:
I gotcha. My apologies. Trying that now.
Sent from my HTC One 801e using xda app-developers app
Click to expand...
Click to collapse
If you have problems use this ROM:
Android_Revolution_HD-One_9.4.zip 970.8 MB (credit to @mike1986.)
https://mega.co.nz/#!aZkF2IIC!UIL4ww1y-bhTq4sQOEVjsi89pmI2GkwCPLMRDlNrrjM
MD5: 06c863ce41b0d5001290737a31e198a1
Prerequisites:
hboot 1.44 (pre June 2013)
firmware 1.xx
revone should work just fine from first go (confirmed from 15, and still counting)
you can either use it through "adb shell" or through a terminal on your phone

nkk71 said:
If you have problems use this ROM:
Android_Revolution_HD-One_9.4.zip 970.8 MB (credit to @mike1986.)
https://mega.co.nz/#!aZkF2IIC!UIL4ww1y-bhTq4sQOEVjsi89pmI2GkwCPLMRDlNrrjM
MD5: 06c863ce41b0d5001290737a31e198a1
Prerequisites:
hboot 1.44 (pre June 2013)
firmware 1.xx
revone should work just fine from first go (confirmed from 15, and still counting)
you can either use it through "adb shell" or through a terminal on your phone
Click to expand...
Click to collapse
Oh that's the first I've heard about running revone straight from your phone. Every single thread I've seen about revone states using a pc and the sequence:
cd sdk/platform-tools
adb push revone /data/local/tmp/
adb shell
su
cd /data/local/tmp
chmod 755 revone
./revone -P
But I always get stuck on "./revone -P" with error code = -6.
I tried downgrading the Hboot but wether in CWM or TWRP, when I pu tthe Nandroid in the CWM/TWRP>Backups folder then reboot to recovery and try to restore from the nandroid, the recovery can't find the file. I made sure the zip was extracted.
Ok so now you're saying I can run revone FROM the phone? Can you please be as detailed as possible about this? Where on my phone exactly does it need to be? How do I run the program? Bootloader? Recovery? What exact steps? I am at my absolute wits end trying to get back to factory fresh. I seem to always run into some kind of error despite any method attempted.

thesk8rguitarist said:
But I always get stuck on "./revone -P" with error code = -6.
I tried downgrading the Hboot but wether in CWM or TWRP, when I pu tthe Nandroid in the CWM/TWRP>Backups folder then reboot to recovery and try to restore from the nandroid, the recovery can't find the file. I made sure the zip was extracted.
Click to expand...
Click to collapse
revone won't work on the patched hboot, you need to downgrade first.
the TWRP backups are usually stored in
/data/media/TWRP/BACKUPS/<device serial number/
or
/data/media/0/TWRP/BACKUPS/<device serial number/
best way to find the location is to make a backup in TWRP of something small (eg only select boot & recovery) that only takes a second, then you can see where the backups are stored and put the one needed to downgrade there.

Fixed my issue. Ended up using a relative's Windows 7, Ran Fastboot OEM Lock, then ran the RUU now I'm good as new.
Bootloader now reads:
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A. 19. 3263.13
OpenDSP-v31.120.274.0617
OS-3.17.502.3
eMMC-boot 2048MB
Sep 10 2013, 01:32:23.0
Based on this, should I need to send it in, will AT&T have a problem?

Fixed my issue. Ended up using a relative's Windows 7, Ran Fastboot OEM Lock, then ran the RUU now I'm good as new.
Bootloader now reads:
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A. 19. 3263.13
OpenDSP-v31.120.274.0617
OS-3.17.502.3
eMMC-boot 2048MB
Sep 10 2013, 01:32:23.0
Based on this, should I need to send it in, will AT&T have a problem?

thesk8rguitarist said:
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
Based on this, should I need to send it in, will AT&T have a problem?
Click to expand...
Click to collapse
Did I miss something I thought you were trying to get S-Off first
And I don't know about AT&T policies, but RELOCKED, definitely tells them you unlocked it. If you need to go back to 100% stock, you can check my guide: http://forum.xda-developers.com/showthread.php?t=2541082
and going S-ON (in the guide) is strictly YOUR choice.

[Q] Can't use my HTC phone, no system

Hey, I was stupid and missed up my phone. I wanted to update my phone, but because It was rooded I wasn't able to do it. So I decided to begin from start. So I downgraded my Hboot to 1.44 and also stupid to set s-on again. But then I could not install the stock rom 1.29.651.10. So I decided to try a custom rom. So I would be able to set s-off again. But non of them worked. I think that the old Hboot 1.44 is why the roms didn't work. But I can't change my Hboot before my device is s-off.
I'm able to use adb sideload and twrp recovery
Bootloader information
Tampered
Unlocked
M7_WLS PTV SHIP S-ON RH
HBOOT-1.44.0000
OpenDSP-v32.120.274.0909
eMMC-boot
May 8 2013.16:30:08:-1
Does any one have any suggestions ?

If I remember right, the older s-off techniques like rumrunner should still work with that hboot. I'd look into those first.

coal686 said:
If I remember right, the older s-off techniques like rumrunner should still work with that hboot. I'd look into those first.
Click to expand...
Click to collapse
I've have already tried rumrunner, but it didn't work for me. I was able to get Viberone 8 to work, but it was very slow. Tried to get s-off but did't work with the Viberone rom. So now i'm trying another one to see if it will allow me to get the phone s-off. But thx for your respond

1.29.401.12. is not a Sprint rom.

BD619 said:
1.29.401.12. is not a Sprint rom.
Click to expand...
Click to collapse
Sorry ment 1.29.651.10

christian8220 said:
Sorry ment 1.29.651.10
Click to expand...
Click to collapse
While booted to fastbootusb open a cmd window (from your platform tools folder) and type:
Code:
fastboot getvar all
Then copy and paste the results here...make sure you remove your IMEI from the results.

BD619 said:
While booted to fastbootusb open a cmd window (from your platform tools folder) and type:
Code:
fastboot getvar all
Then copy and paste the results here...make sure you remove your IMEI from the results.
Click to expand...
Click to collapse
Here you go

christian8220 said:
Here you go
Click to expand...
Click to collapse
Re-lock your bootloader and use the 1.29.651.10 RUU then give revone a try it should work to get you s-off again

BD619 said:
Re-lock your bootloader and use the 1.29.651.10 RUU then give revone a try it should work to get you s-off again
Click to expand...
Click to collapse
Thx it worked for me. First I replaced the TWRP recovery with the stock recovery 1.29.651.10. After that I relocked my bootloader "fastboot oem lock" and the device rebooted. I used the 1.29.651.10 RUU exe. and it worked. So thank you, have a nice day