Database Develop

[Q] please help

Hi, i wanted to install custom rom on my htc one, i followed a video to root and unlock device, worked great. Went and downloaded sd eragon rom and went into recovery, followed the rom onscreen instructions till the end and was asked to reboot device, after that it went to htc screen then said at top entering recovery.
I tried rebooting again but same happened again... so i went to instll zip from sd card again and it said no files. So i am stuck in recovery with no file to flash and when i plug phone upto laptop it doesnt show the phone so i can transfer another rom over to flash again :crying:
Can someone please help, thank you

mingmong24 said:
Hi, i wanted to install custom rom on my htc one, i followed a video to root and unlock device, worked great. Went and downloaded sd eragon rom and went into recovery, followed the rom onscreen instructions till the end and was asked to reboot device, after that it went to htc screen then said at top entering recovery.
I tried rebooting again but same happened again... so i went to instll zip from sd card again and it said no files. So i am stuck in recovery with no file to flash and when i plug phone upto laptop it doesnt show the phone so i can transfer another rom over to flash again :crying:
Can someone please help, thank you
Click to expand...
Click to collapse
Post your fastboot getvar all minus IMEI/SN
What recovery are you using? What version?
Link to the rom please.
Btw you can use adb to push a rom to your sd card while in recovery mode.
Code:
adb push <name_of_file>.zip /sdcard/

Hi andthanks for quick reply
c:\fastboot> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3843mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.048s
using cwr v.6.0.4.6
http://forum.xda-developers.com/showthread.php?t=2423492
and when i go to push rom it says offline, when i go to mount and storage in recovery i dont have a sd card :/
thanks

when i go to mount and storage in recovery i have these options
unmount / system
unmount / cache
mount / data
mount / firmware/mdm
mount / firmware/q6
format / system
format / cache
format / data
format / firmware/mdm
format / firmware/q6
format / data and / data / media (/sdcard)
mount usb storage
thanks

am i out of luck?

mingmong24 said:
am i out of luck?
Click to expand...
Click to collapse
try flashing TWRP, it is the recommended recovery at the moment due to compatibility with 4.4 ROMs:
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
make sure to verify the MD5 of the file, cause that site doesnt play nice with download managers
then flash it in bootloader/FASTBOOT USB:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
-> enter recovery
adb push <name of rom>.zip /data/media/0/
and go ahead and install it (make sure the rom.zip MD5 is also correct, and that it's compatible for HTC One M7_U/UL)

Life saver thank you very much

Bricked HTC ONE? Wiped system! SOLVED

Hey guys,
i just wanted to install a new custom and wanted to do a clean install.
But I wiped also my system. So there is no OS installed anymore.
TWRP 2.3.6 is still accessable for me but how do I get a new OS to my phone?
I tryed via adb push but it says "error: device not" found.
the same with adb sideload.
In My Windows Device Manager the HTC show up with no valid driver.
Installing HTC SYN Software again didn´t helped either
Is there a chance to get it fixed somehow?

Did you do a backup through twrp? If not you can reinstall the stock rom or any custom rom by removing your sdcard put it in your computer, put the rom on it, pot it back in your phone, reboot to recovery, then install the stock rom for the custom ROM that you want. I hope this helps. If not pm me.
By sdcard I mean external sdcard.

Genesis23 said:
Hey guys,
i just wanted to install a new custom and wanted to do a clean install.
But I wiped also my system. So there is no OS installed anymore.
TWRP 2.3.6 is still accessable for me but how do I get a new OS to my phone?
I tryed via adb push but it says "error: device not" found.
the same with adb sideload.
In My Windows Device Manager the HTC show up with no valid driver.
Installing HTC SYN Software again didn´t helped either
Is there a chance to get it fixed somehow?
Click to expand...
Click to collapse
What is your recovery ? did you mean 2.6.3.3 ?
are you in recovery when you try adb devices / sideload / push ?
can you post your fastboot getvar all
and a screen shot of the command window adb push / failing
chriscockerham1976 said:
Did you do a backup through twrp? If not you can reinstall the stock rom or any custom rom by removing your sdcard put it in your computer, put the rom on it, pot it back in your phone, reboot to recovery, then install the stock rom for the custom ROM that you want. I hope this helps. If not pm me.
By sdcard I mean external sdcard.
Click to expand...
Click to collapse
you do realize the HTC One has no sdcard right ?

Hi,
here is my fastboot output
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXX
(bootloader) imei: XXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4310mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Just before wiping System I installed TWRP v2.6.3.4.
And this is the simple output while pushing via fastboot
c:\Android>adb push ViperOne_5.7.0.zip /sdcard
error: device not found
The same output while in TWRP-side load
c:\Android>adb sideload ViperOne_5.7.0.zip
error: device not found
When I´m connected in recovery mode then my PC says there is no driver installed for my HTC ONE.
Do I connect in fastboot mode the everything seems to te fine except accessing the sdcard via windows explorer. It just shows not up.

I also tryed to flash via fastboot but it also didn´t worked
c:\Android\platform-tools>fastboot flash zip ViperOne_5.7.0.zip
sending 'zip' (1098724 KB)...
OKAY [ 60.637s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 60.669s

Genesis23 said:
Hi,
here is my fastboot output
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXX
(bootloader) imei: XXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4310mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Just before wiping System I installed TWRP v2.6.3.4.
And this is the simple output while pushing via fastboot
c:\Android>adb push ViperOne_5.7.0.zip /sdcard
error: device not found
The same output while in TWRP-side load
c:\Android>adb sideload ViperOne_5.7.0.zip
error: device not found
When I´m connected in recovery mode then my PC says there is no driver installed for my HTC ONE.
Do I connect in fastboot mode the everything seems to te fine except accessing the sdcard via windows explorer. It just shows not up.
Click to expand...
Click to collapse
you should check Windows Device Manager (while in TWRP), if it shows up as: "Unknown -> One" instead of "Android ... -> My HTC" then check my guide's FAQ #2

nkk71 said:
you should check Windows Device Manager (while in TWRP), if it shows up as: "Unknown -> One" instead of "Android ... -> My HTC" then check my guide's FAQ #2
Click to expand...
Click to collapse
Hi so in TWRP it shows up as unknown and "One" but which FAQ should I follow exactly?

Genesis23 said:
Hi so in TWRP it shows up as unknown and "One" but which FAQ should I follow exactly?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2541082 in Post #1 check FAQ #2

3335636 117
nkk71 said:
http://forum.xda-developers.com/showthread.php?t=2541082 in Post #1 check FAQ #2
Click to expand...
Click to collapse
Okay cool,
Driver is now installed and i check via "adb devices".
Can I now install just the custom rom or do I have to take a RUU?

Genesis23 said:
Okay cool,
Driver is now installed and i check via "adb devices".
Can I now install just the custom rom or do I have to take a RUU?
Click to expand...
Click to collapse
custom ROM, sorry i linked you to my return to stock guide, but i just wanted you to use FAQ #2, instead of having to type it here again.
go ahead with adb push or adb sideload your custom ROM.

nkk71 said:
custom ROM, sorry i linked you to my return to stock guide, but i just wanted you to use FAQ #2, instead of having to type it here again.
go ahead with adb push or adb sideload your custom ROM.
Click to expand...
Click to collapse
Oh my god thank you so much for your help.
I´m running a custom rom again.
So keep in mind: Never wipe system!

Genesis23 said:
Oh my god thank you so much for your help.
I´m running a custom rom again.
So keep in mind: Never wipe system!
Click to expand...
Click to collapse
or wipe it , then use OTG cable, or adb push, or adb sideload
if all is good, can you also edit main thread title to include [SOLVED]
Enjoy and happy flashing

[Q] sprint htc one struck in bootloop while flashing ruu

I bought a sprint htc one m7 couple of days ago and brought it to india.. it has
-stock 4.3 rom
-hboot 1.55
-bootloader unlocked
-s-off acheived using firewater
i was trying to sim unlock the phone... but after flashing this http://forum.xda-developers.com/showthread.php?t=2586704 ruu... its struck on htc logo.. all help appreciated... im a bit noob in this subject...
i would like to also share that while flashing ruu the phone got ejected from the system and now i cant access the intenal storage...when i try to do adb sideload it says "device not found"...TWRP recovery also does not shows my internal sd card.. and i hav ordered USB OTG cable to try and flash it from usb drive..is this way safe and will it work?? is there any way to fix this problem??
thanks in advance..

EDIT
i tried USB OTG method but the USB wont mount at all it shows USB-OTG(0MB) and usb-otg mount failed
and the phone goes in fastboot mode when i try to connect it to pc...
please help me out...
thanks in advance:crying:

First, which version of the one did you have like m7wls m7vzw or like which m7? Did you cross flash ruu's??? That could cause lots of issues if you did that.... Only ruu's specifically made for the phone will work, also when trying to ruu, were you running the exe or zip?
Sent from my Rezound running PAC-Man with SENSE!! 4.4.2 S-OFF

pball52998 said:
First, which version of the one did you have like m7wls m7vzw or like which m7? Did you cross flash ruu's??? That could cause lots of issues if you did that.... Only ruu's specifically made for the phone will work, also when trying to ruu, were you running the exe or zip?
Sent from my Rezound running PAC-Man with SENSE!! 4.4.2 S-OFF
Click to expand...
Click to collapse
i have m7wls... when i connect it to pc and go to twrp recovery it shows up as m7wls with a small yellow exclamatory mark (!) and when i connect it in bootloader it shows up as my htc...
i was flashing it through pc by running .exe file and i got ejected sound on my win 8.1...
since then i have this problem
please help me out..
thanks in advance

praveensk.rcb said:
i have m7wls... when i connect it to pc and go to twrp recovery it shows up as m7wls with a small yellow exclamatory mark (!) and when i connect it in bootloader it shows up as my htc... please help me out..
thanks in advance
Click to expand...
Click to collapse
When you run
Code:
adb devices
while in recovery what does it give you? Also could you post a fastboot, and do
Code:
fastboot getvar all
post all except imie and Serial No, and meid

pball52998 said:
When you run
Code:
adb devices
while in recovery what does it give you? Also could you post a fastboot, and do
Code:
fastboot getvar all
post all except imie and Serial No, and meid
Click to expand...
Click to collapse
while in fastboot when i connect the phone i get a sound notification that phone is plugged and phone shows FASTBOOT USB...
but i cant see anything in windows explorer....
as in twrp recovery i cant see my backup rom it only shows folders like /cache /data /dev /etc /licence etc...

praveensk.rcb said:
while in fastboot when i connect the phone i get a sound notification that phone is plugged and phone shows FASTBOOT USB...
but i cant see anything in windows explorer....
as in twrp recovery i cant see my backup rom it only shows folders like /cache /data /dev /etc /licence etc...
Click to expand...
Click to collapse
You don't find it in windows explorer... Its a command initiated through cmd prompt where your adb and fastboot is..... and actually same for when in twrp, look i will show you mine....
Code:
Preston-Ball:Main files and scripts prestonball$ adb devices
List of devices attached
My Serial No... recovery
Preston-Ball:Main files and scripts prestonball$
That is just in the main menu of TWRP, nothing else....
now lets say you wanna push a ROM.... just do..
Code:
adb push name_of_rom.zip /location/where/you/want/ROM
Then for the fastboot USB... With fastboot getvar all
Code:
Preston-Ball:Main files and scripts prestonball$ fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.28.0000
(bootloader) version-baseband: 2.23.10.0123r/2.23.10.0124r
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: **************
(bootloader) imei: ************
(bootloader) product: vigor
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PH9810000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3904mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: cecc19f7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.497s
Preston-Ball:Main files and scripts prestonball$
Thats what the fastboot getvar all is...

Bootloader
pball52998 said:
You don't find it in windows explorer... Its a command initiated through cmd prompt where your adb and fastboot is..... and actually same for when in twrp, look i will show you mine....
Code:
Preston-Ball:Main files and scripts prestonball$ adb devices
List of devices attached
My Serial No... recovery
Preston-Ball:Main files and scripts prestonball$
That is just in the main menu of TWRP, nothing else....
now lets say you wanna push a ROM.... just do..
Code:
adb push name_of_rom.zip /location/where/you/want/ROM
Then for the fastboot USB... With fastboot getvar all
Code:
Preston-Ball:Main files and scripts prestonball$ fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.28.0000
(bootloader) version-baseband: 2.23.10.0123r/2.23.10.0124r
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: **************
(bootloader) imei: ************
(bootloader) product: vigor
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PH9810000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3904mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: cecc19f7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.497s
Preston-Ball:Main files and scripts prestonball$
Thats what the fastboot getvar all is...
Click to expand...
Click to collapse
my bootloader reads
***TAMPERED***
***UNLOCKED***
M7_WLS PVT SHIP S-OFF RH
CID-SPECS_001
HBOOT-1.44.0000
RADIO-1.00.20.1108
OpenDSP-v32.120.274.0909
eMMC-boot
at first my bootloader version was 1.55 but while flashing ruu it got downgraded but in the middle of the process it got stuck and phone got ejected with no rom at all... i was doing it in my friend's pc which has windows 8.1.. is it safe to do it win 8.1 or shuld i do it in win 7???
can you please share a link on how to repair the phone step by step...(newbie)
thanks in advance

okay i got this
pball52998 said:
You don't find it in windows explorer... Its a command initiated through cmd prompt where your adb and fastboot is..... and actually same for when in twrp, look i will show you mine....
Code:
Preston-Ball:Main files and scripts prestonball$ adb devices
List of devices attached
My Serial No... recovery
Preston-Ball:Main files and scripts prestonball$
That is just in the main menu of TWRP, nothing else....
now lets say you wanna push a ROM.... just do..
Code:
adb push name_of_rom.zip /location/where/you/want/ROM
Then for the fastboot USB... With fastboot getvar all
Code:
Preston-Ball:Main files and scripts prestonball$ fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.28.0000
(bootloader) version-baseband: 2.23.10.0123r/2.23.10.0124r
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: **************
(bootloader) imei: ************
(bootloader) product: vigor
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PH9810000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3904mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: cecc19f7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.497s
Preston-Ball:Main files and scripts prestonball$
Thats what the fastboot getvar all is...
Click to expand...
Click to collapse
i got this...
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>adb devices
List of devices attached
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>fastboot devices
FA344S900731 fastboot
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA344S900731
(bootloader) imei: 9***********10
(bootloader) meid: 9*********11
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4045mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.063s
now what should i do??? please help
thanks in advance

praveensk.rcb said:
i got this...
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>adb devices
List of devices attached
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>fastboot devices
FA344S900731 fastboot
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA344S900731
(bootloader) imei: 9***********10
(bootloader) meid: 9*********11
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4045mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.063s
now what should i do??? please help
thanks in advance
Click to expand...
Click to collapse
If you are trying to flash a Sprint RUU, use this thread: Bad Boyz RUU. It's the latest RUU, and I've used it myself. I've wiped my internal storage on accident and on purpose and was able to get my phone up and running using this.
Your phone is not showing up using ADB because you currently have no operating system, same for the USB OTG. Make sure you are using the stock cable (or a high quality replacement). Best of luck to you.

praveensk.rcb said:
i got this...
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>adb devices
List of devices attached
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>fastboot devices
FA344S900731 fastboot
C:\Users\Praveen-SK\Desktop\HTC One\adt-bundle-windows-x86_64-20140321\sdk\platf
orm-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA344S900731
(bootloader) imei: 9***********10
(bootloader) meid: 9*********11
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4045mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.063s
now what should i do??? please help
thanks in advance
Click to expand...
Click to collapse
Sorry just got to my computer... but Good device is found, all drivers are installed good then.... Okay now time for the RUU... We're going to try a RUU first and see how good it works, okay?
Here is the RUU file.. http://www.androidfilehost.com/?fid=22926241640219526 Download the zip, place it in the folder where your ADB and fastboot is. Once you have it downloaded and in your ADB/fastboot folder,
From fastboot you need to first re-lock your bootloader
fastboot oem lock
Once locked it will boot back into bootloader
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your Rom.zip file is in your adb/fastboot folder
fastboot flash zip Rom.zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
Make sure device is still in ruu mode(black HTC screen). If not rerun
fastboot oem rebootRUU
now simply reflash the rom.zip
fastboot flash zip Rom.zip
Let it run and it should finish this time
It will reboot to a fully stock build.
just remember, anytime you get a "flush immediately" error, just make sure your still in ruu mode and reflash the zip.
The most common error is typically
(Error 155)
You did not re lock your bootloader first
-go relock and flash again
More than likely the first time you flash it, it will not work, it usually takes twice for the RUU to go through.. I did copy this from another forum post. But it worked when I have ruu'ed my phone. Do you just wanna go to stock? Or another ROM, if this doesn't work we can load a ROM... .-.

pball52998 said:
Sorry just got to my computer... but Good device is found, all drivers are installed good then.... Okay now time for the RUU... We're going to try a RUU first and see how good it works, okay?
Here is the RUU file.. http://www.androidfilehost.com/?fid=22926241640219526 Download the zip, place it in the folder where your ADB and fastboot is. Once you have it downloaded and in your ADB/fastboot folder,
From fastboot you need to first re-lock your bootloader
fastboot oem lock
Once locked it will boot back into bootloader
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your Rom.zip file is in your adb/fastboot folder
fastboot flash zip Rom.zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
Make sure device is still in ruu mode(black HTC screen). If not rerun
fastboot oem rebootRUU
now simply reflash the rom.zip
fastboot flash zip Rom.zip
Let it run and it should finish this time
It will reboot to a fully stock build.
just remember, anytime you get a "flush immediately" error, just make sure your still in ruu mode and reflash the zip.
The most common error is typically
(Error 155)
You did not re lock your bootloader first
-go relock and flash again
More than likely the first time you flash it, it will not work, it usually takes twice for the RUU to go through.. I did copy this from another forum post. But it worked when I have ruu'ed my phone. Do you just wanna go to stock? Or another ROM, if this doesn't work we can load a ROM... .-.
Click to expand...
Click to collapse
ok i will try to do that... but can you tell me what has hapened to by phone now??? before the got soft bricked its hboot version was 1.55 but after incomlete flashing of ruu, its hboot version has become 1.44???

praveensk.rcb said:
ok i will try to do that... but can you tell me what has hapened to by phone now??? before the got soft bricked its hboot version was 1.55 but after incomlete flashing of ruu, its hboot version has become 1.44???
Click to expand...
Click to collapse
While it was probably restoring system or something like the emmc, could have went ka plunk.... which if it did and the ruu doesn't work... its a good thing you're s-off..

pball52998 said:
While it was probably restoring system or something like the emmc, could have went ka plunk.... which if it did and the ruu doesn't work... its a good thing you're s-off..
Click to expand...
Click to collapse
will it be safe flash an RUU??? im using windows 8 32-bit and x86 sdk kit... is it ok??

slyest12 said:
If you are trying to flash a Sprint RUU, use this thread: Bad Boyz RUU. It's the latest RUU, and I've used it myself. I've wiped my internal storage on accident and on purpose and was able to get my phone up and running using this.
Your phone is not showing up using ADB because you currently have no operating system, same for the USB OTG. Make sure you are using the stock cable (or a high quality replacement). Best of luck to you.
Click to expand...
Click to collapse
thanks for the info....but i have see many others who have got adb sideload working... and i have got an aftermarket USB OTG cable...are there different RUU's for HTC one like 3.0,1.29.4.0... which one will be suited for my device??

The one that I sent you was for your device, pretty much you would take it, it would return you back to stock. Take a OTA, have the newest radios and unlock again. But if you want a new ROM, you don't even need adb sideload... I've never gotten that crap to work... -,,,,,,,,,- but there's also different RUUs, they all do the same thing pretty much. But if you want to use a ROM. Go into Mount in twrp and what are you options?
Sent form my Rezound running sense 5. S-OFF

pball52998 said:
The one that I sent you was for your device, pretty much you would take it, it would return you back to stock. Take a OTA, have the newest radios and unlock again. But if you want a new ROM, you don't even need adb sideload... I've never gotten that crap to work... -,,,,,,,,,- but there's also different RUUs, they all do the same thing pretty much. But if you want to use a ROM. Go into Mount in twrp and what are you options?
Sent form my Rezound running sense 5. S-OFF
Click to expand...
Click to collapse
i intend to downgrade the phone to 4.1.2 from 4.3 and unlock the phone using sim unlocker app and then upgrade the rom to any newer version like viper rom

praveensk.rcb said:
i intend to downgrade the phone to 4.1.2 from 4.3 and unlock the phone using sim unlocker app and then upgrade the rom to any newer version like viper rom
Click to expand...
Click to collapse
You should be able to do that its just downgrading then upgrading radios.. I would say, take the ruu. Take the latest ota, or unlock and root for that sim unlock, then take a ota, Which I think you would have to then unlock again or flash the radios via recovery since your s-off in the form of a zip. Then take your ROM put it on internal SD card, wipe everything but Internal SD card and all that crap, then flash ROM and correlating GAPPS.

pball52998 said:
You should be able to do that its just downgrading then upgrading radios.. I would say, take the ruu. Take the latest ota, or unlock and root for that sim unlock, then take a ota, Which I think you would have to then unlock again or flash the radios via recovery since your s-off in the form of a zip. Then take your ROM put it on internal SD card, wipe everything but Internal SD card and all that crap, then flash ROM and correlating GAPPS.
Click to expand...
Click to collapse
will it be safe to RUU in windows 8???

Yes, as long as you have proper drivers.
Sent form my Rezound running sense 5. S-OFF

Unable to flash any zip or restore backup or flash any thing.

I cant do relock, flash recovery, flash zip, sideload. I can boot to recovery(TWRP) but when I try to restore backup it will cut off and reboot in the middle. When I try install any rom it will be successful, but no ROM is installed(very quick flashing) . I cant see any files in system folder. I cant flash RUU because I cant relock.
In short way it showing all things looks like accepted by phone but it does nothing! Something like write protection.
And it showing only 3814MB instead 32GB on recovery.
I would be happy if someone has any good idea how to get it back to life.
Bootloader tampered, unlocked, hboot 1.55 S-ON

robdevil said:
I cant do relock, flash recovery, flash zip, sideload. I can boot to recovery(TWRP) but when I try to restore backup it will cut off and reboot in the middle. When I try install any rom it will be successful, but no ROM is installed(very quick flashing) . I cant see any files in system folder. I cant flash RUU because I cant relock.
In short way it showing all things looks like accepted by phone but it does nothing! Something like write protection.
And it showing only 3814MB instead 32GB on recovery.
I would be happy if someone has any good idea how to get it back to life.
Bootloader tampered, unlocked, hboot 1.55 S-ON
Click to expand...
Click to collapse
Ok first, a few questions:
can you post the output of fastboot getvar all except the imei and serialno ?
What rom/version are you trying to flash?
What backup? is it your personal backup, or one you have downloaded?
What version of TWRP are you using?
Is there any error code displayed after flashing the rom? Does it says "failed", "successful", "enable to mont /somehting" ??
Do you have all you drivers installed correctly? When your phone is in bootloader mode, in windows device manager, what does it says?
Do you have checked MD5 on your ROM/RECOVERY/BACKUP before flashing?
please answer all questions the best you can.

alray said:
Ok first, a few questions:
can you post the output of fastboot getvar all except the imei and serialno ?
What rom/version are you trying to flash?
What backup? is it your personal backup, or one you have downloaded?
What version of TWRP are you using?
Is there any error code displayed after flashing the rom? Does it says "failed", "successful", "enable to mont /somehting" ??
Do you have all you drivers installed correctly? When your phone is in bootloader mode, in windows device manager, what does it says?
Do you have checked MD5 on your ROM/RECOVERY/BACKUP before flashing?
please answer all questions the best you can.
Click to expand...
Click to collapse
Ad1:
C:\Users\Robert>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: (removed)
(bootloader) imei: (removed)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4313mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.127s
Ad2:
I tried insert coin, HD revolution, GE from mike, stock odex too.
Ad3: Backups are stored in phone memory. All were there when phone has arrived so I do assume they are belongs to previous owner. However memory looks like corrupted. I can not add or remove any files.
Ad4: TWRP 2.6.3.3 When I try to flash new one in fastboot it is successful but recovery remain the same.
Ad5: Every rom with aroma installer is successful but nothing is installed. Stock odex HD wont install from otg or sideload just keeps rebooting.
http://youtu.be/rcqGOf24woM or showing error that it cant execute updater from zip.
Ad6: Yes all drivers are ok.
Ad7: Yes all md5 were ok

robdevil said:
Ad1:
C:\Users\Robert>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: (removed)
(bootloader) imei: (removed)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4313mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.127s
Ad2:
I tried insert coin, HD revolution, GE from mike, stock odex too.
Ad3: Backups are stored in phone memory. All were there when phone has arrived so I do assume they are belongs to previous owner. However memory looks like corrupted. I can not add or remove any files.
Ad4: TWRP 2.6.3.3 When I try to flash new one in fastboot it is successful but recovery remain the same.
Ad5: Every rom with aroma installer is successful but nothing is installed. Stock odex HD wont install from otg or sideload just keeps rebooting.
http://youtu.be/rcqGOf24woM or showing error that it cant execute updater from zip.
Ad6: Yes all drivers are ok.
Ad7: Yes all md5 were ok
Click to expand...
Click to collapse
reflash twrp 2.6.3.3
MD5: 72067aefb69541d40e8420d7aa46408d
Code:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
then boot in recovery and wipe everything + format data.
push this rom to your phone:http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/ this will take between 5-10 min (no progress bar just wait for adb to give you back the prompt)
md5: 6444b41a1f332f31345d5ead674382d7
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
when the transfer is complete, in twrp select "install" then select "guru_reset_m7_3.62.401.1.zip"
then follow instruction in Aroma GUI
report back if it works or not.
good luck

It doesnt work.
I can push files to sdcard. but when I do wipe, all files from media will be deleted except those which already was there. So I cant delete insertcoin zip from sd and I cant delete backups. It looks like its memory is write protected.
When I try install something it all looks ok but it does nothing. Just reboot...white htc screen....reboot to recovery no changes done at all. It is like frozen.
Command fastboot reboot-bootloader doesnt work. It will boot to splash then back to recovey but not to bootloader.
Comand fastboot oem lock does nothing.
Any other ideas?

robdevil said:
It doesnt work.
I can push files to sdcard. but when I do wipe, all files from media will be deleted except those which already was there. So I cant delete insertcoin zip from sd and I cant delete backups. It looks like its memory is write protected.
When I try install something it all looks ok but it does nothing. Just reboot...white htc screen....reboot to recovery no changes done at all. It is like frozen.
Command fastboot reboot-bootloader doesnt work. It will boot to splash then back to recovey but not to bootloader.
Comand fastboot oem lock does nothing.
Any other ideas?
Click to expand...
Click to collapse
You are not the only one with this issue.
If he gets a solution you could use the same :
http://forum.xda-developers.com/htc-one/help/wipe-doesnt-wipe-flash-doesnt-flash-t2832553/page2

robdevil said:
It doesnt work.
I can push files to sdcard. but when I do wipe, all files from media will be deleted except those which already was there. So I cant delete insertcoin zip from sd and I cant delete backups. It looks like its memory is write protected.
When I try install something it all looks ok but it does nothing. Just reboot...white htc screen....reboot to recovery no changes done at all. It is like frozen.
Command fastboot reboot-bootloader doesnt work. It will boot to splash then back to recovey but not to bootloader.
Comand fastboot oem lock does nothing.
Any other ideas?
Click to expand...
Click to collapse
It doesnt look good. Maybe you could try to restore using the ruu, not sure if it will make a difference.
http://www.htc1guru.com/2014/03/android-ruu-europe/

alray said:
It doesnt look good. Maybe you could try to restore using the ruu, not sure if it will make a difference.
http://www.htc1guru.com/2014/03/android-ruu-europe/
Click to expand...
Click to collapse
I would like to but I can not re-lock it.

robdevil said:
I would like to but I can not re-lock it.
Click to expand...
Click to collapse
you're right sorry.

[Q] HTC One M7 - T-Mobile HU unable to update to lollipop

Hey,
My HTC One is notifying me of new updates, after rebooting to recovery it says can't install it.
unknown volume and can't install INTERNAL SD
Informations I know:
Radio: 4T.29.3218.08
S-ON
unlocked Bootloader
rooted
If you need anything else ask and I'll try and find it out.

Tuskone said:
Hey,
My HTC One is notifying me of new updates, after rebooting to recovery it says can't install it.
unknown volume and can't install INTERNAL SD
Informations I know:
Radio: 4T.29.3218.08
S-ON
unlocked Bootloader
rooted
If you need anything else ask and I'll try and find it out.
Click to expand...
Click to collapse
fastboot getvar all would be good, without IMEI or Serial Number please.
On another note, you MUST BE 100% stock to update, no root, no custom recovery, stock kernal, stock rom, stock recovery, all matching your firmware number.

I've been searching for 2 days but couldn't find a RUU to my radio. And I'm unsure if that would be even enough. I didn't install any other rom, I've just rooted it, so I could remove some of the bloatware.
But nonetheless here's my phone's details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3987mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.104s

Tuskone said:
I've been searching for 2 days but couldn't find a RUU to my radio. And I'm unsure if that would be even enough. I didn't install any other rom, I've just rooted it, so I could remove some of the bloatware.
But nonetheless here's my phone's details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3987mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.104s
Click to expand...
Click to collapse
first of all, your not on T-Mobile software, your on WWE World wide english (6.09.401.11)
So ive got to ask, which recovery do you have installed ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:41 AM ----------
what you need to do is flash TWRP 2.8.5.0 from here: http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img
Code:
fastboot flash recovery (name of recovery).img
fastboot erase cache
fastboot reboot-bootloader
enter recovery and create a simple backup, just something like the boot, then plug your phone into the computer, whilst its still in recovery mode, that recovery supports MTP so your internal storage should open up on your computer, if it doesnt, you have a driver problem, but if it does, then navigate to TWRP/Backup/Phone serial number/todays date and some other details, delete the backup files out of there and place the files inside this zip in there instead, files only not folders:
https://www.androidfilehost.com/?fid=95832962473396067
unplug your phone and restore that backup.
once restored, restart your phone and just do a basic setup.
then boot back to the bootloader and flash this stock recovery:
https://www.androidfilehost.com/?fid=95832962473395870
again:
Code:
fastboot flash recovery (name of recovery).img
fastboot erase cache
fastboot reboot-bootloader
when you restart your phone you should now be able to update.
OTA's require you to be 100% stock, including all bloatware, no root, nothing custom.

Seanie280672 said:
first of all, your not on T-Mobile software, your on WWE World wide english (6.09.401.11)
So ive got to ask, which recovery do you have installed ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:41 AM ----------
what you need to do is flash TWRP 2.8.5.0 from here: http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img
Code:
fastboot flash recovery (name of recovery).img
fastboot erase cache
fastboot reboot-bootloader
enter recovery and create a simple backup, just something like the boot, then plug your phone into the computer, whilst its still in recovery mode, that recovery supports MTP so your internal storage should open up on your computer, if it doesnt, you have a driver problem, but if it does, then navigate to TWRP/Backup/Phone serial number/todays date and some other details, delete the backup files out of there and place the files inside this zip in there instead, files only not folders:
https://www.androidfilehost.com/?fid=95832962473396067
unplug your phone and restore that backup.
once restored, restart your phone and just do a basic setup.
then boot back to the bootloader and flash this stock recovery:
https://www.androidfilehost.com/?fid=95832962473395870
again:
Code:
fastboot flash recovery (name of recovery).img
fastboot erase cache
fastboot reboot-bootloader
when you restart your phone you should now be able to update.
OTA's require you to be 100% stock, including all bloatware, no root, nothing custom.
Click to expand...
Click to collapse
So you gave me the firmware, its on the phone now.
I had Unlock.bin, but i can see it has supersu installed in it.
i flashed to stockrecovery from where you helped the other guy.
Im waiting for my download OTA update to finish (official).
Will i be able to update it even that i see its rootet (supersu)?

dukocuk said:
So you gave me the firmware, its on the phone now.
I had Unlock.bin, but i can see it has supersu installed in it.
i flashed to stockrecovery from where you helped the other guy.
Im waiting for my download OTA update to finish (official).
Will i be able to update it even that i see its rootet (supersu)?
Click to expand...
Click to collapse
wrong thread lol, answered on your thread.

Thanks a lot! I'm now a proud lollipopper.
A beer is on me