I'm going to flash cm10 on a friend's i9070..
I'm planning to do this:
-Flash "root.zip" with stock recovery
-Install universal kernel flash
-Use above app to flash cocore
-Make a cwm backup just in case (with cocore's cwm recovery)
-Do wipes and flash cm10 and gapps with cwm
Do I have to unlock bootloader or do any other extra procedure?
NeriL said:
I'm going to flash cm10 on a friend's i9070..
I'm planning to do this:
-Flash "root.zip" with stock recovery
-Install universal kernel flash
-Use above app to flash cocore
-Make a cwm backup just in case (with cocore's cwm recovery)
-Do wipes and flash cm10 and gapps with cwm
Do I have to unlock bootloader or do any other extra procedure?
Click to expand...
Click to collapse
You don't need to do anything like this to flash CM10, not even the root.
Just flash the CM10.zip in stock recovery
eduds said:
You don't need to do anything like this to flash CM10, not even the root.
Just flash the CM10.zip in stock recovery
Click to expand...
Click to collapse
NeriL said:
I'm going to flash cm10 on a friend's i9070..
I'm planning to do this:
-Flash "root.zip" with stock recovery
-Install universal kernel flash
-Use above app to flash cocore
-Make a cwm backup just in case (with cocore's cwm recovery)
-Do wipes and flash cm10 and gapps with cwm
Do I have to unlock bootloader or do any other extra procedure?
Click to expand...
Click to collapse
You do need a custom kernel and recovery to flash a rom! Just 2 other little things: make sure your friend is running jellybean and not gingerbread, and flash cm10.1 or cm10.2 because cm10 has been abandoned from a long time..
Sent from Italy using Tapatalk
NeriL said:
I'm going to flash cm10 on a friend's i9070..
I'm planning to do this:
-Flash "root.zip" with stock recovery
-Install universal kernel flash
-Use above app to flash cocore
-Make a cwm backup just in case (with cocore's cwm recovery)
-Do wipes and flash cm10 and gapps with cwm
Do I have to unlock bootloader or do any other extra procedure?
Click to expand...
Click to collapse
There is no bootloader crap in our phone
Toni5830 said:
You do need a custom kernel and recovery to flash a rom! Just 2 other little things: make sure your friend is running jellybean and not gingerbread, and flash cm10.1 or cm10.2 because cm10 has been abandoned from a long time..
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
No, you don't anything to flash a CM ROM.
Thanks for all your replies! =D
I wasn't sure about procedure, because all my smartphones were sony..
Yes, bootloader is pure crap (mine is not-unlockable) -.-
I forgot to say that phone has stock JB 4.1.2 since the moment it was bought! Not rooted, no tweaks, no nothing..
SO:
-Flash "root.zip" with stock recovery
Click to expand...
Click to collapse
I don't need this because roms are prerooted (superuser.apk in /system/app/ and su in /system/bin/)
-Install universal kernel flash
-Use above app to flash cocore
Click to expand...
Click to collapse
I don't need this because it already has 4.1.2 samsung's official kernel
-Make a cwm backup just in case (with cocore's cwm recovery)
Click to expand...
Click to collapse
I don't need this because I can backup everything with titanium backup or any other app
-Do wipes and flash cm10 and gapps with cwm
Click to expand...
Click to collapse
Not sure about wiping dalvik cache.. Stock recovery doesn't have that option =/
Is this procedure the same for any rom?
In case anything goes wrong, how can I flash back stock JB?
NeriL said:
Thanks for all your replies! =D
I wasn't sure about procedure, because all my smartphones were sony..
Yes, bootloader is pure crap (mine is not-unlockable) -.-
I forgot to say that phone has stock JB 4.1.2 since the moment it was bought! Not rooted, no tweaks, no nothing..
SO:
I don't need this because roms are prerooted (superuser.apk in /system/app/ and su in /system/bin/)
I don't need this because it already has 4.1.2 samsung's official kernel
I don't need this because I can backup everything with titanium backup or any other app
Not sure about wiping dalvik cache.. Stock recovery doesn't have that option =/
Is this procedure the same for any rom?
In case anything goes wrong, how can I flash back stock JB?
Click to expand...
Click to collapse
That is just for CM. And do not install 10, flash 10.1. 10 is abandoned. You can wipe dalvik cache after you install CM, you will get custom recovery.
You can go back to stock JB by restoring nandroid backup - the thing you told that you do not need. :laugh: Or with flashing stock Firmware with Odin.
Let me check if I'm ok:
-Flash root.zip to use titanium backup and save all installed user apps and data
-Flash CM10.1, CM10.2 or roms based on any of these (searched in youtube for roms and JellyMOD 4.0 seems to work OK)
-Turn off, turn on in custom recovery and do wipes
-Reboot and everything should work
NeriL said:
Let me check if I'm ok:
-Flash root.zip to use titanium backup and save all installed user apps and data
-Flash CM10.1, CM10.2 or roms based on any of these (searched in youtube for roms and JellyMOD 4.0 seems to work OK)
-Turn off, turn on in custom recovery and do wipes
-Reboot and everything should work
Click to expand...
Click to collapse
Yes.
P.S. I think JellyMOD is outdated. It is made way before most of the things are fixed on CM. I suggest you CM10.1 d-h.st/168
Nice..! =D
thanks!
One last question: everything works in that rom with stock kernel?
NeriL said:
Nice..! =D
thanks!
One last question: everything works in that rom with stock kernel?
Click to expand...
Click to collapse
It has its own kernel. I am not sure, I am using CM10.1 now, see on its thread.
OK! i think i don't need more info than this..
thank you so much!
Related
i have questions:
- is a polish Polish language?
- right now im in isc
N7000XXLPY_N7000OXALPY_DBT Germany with F-Root-SGN_XX_OXA_LPY-v5.3-CWM5 uploaded with mobileodin without ful wipe i use this instrucion?
"b1 coming from other rooted LPY-ROM or rooted ICS Stock ROM (No Wipe):
- boot in Recovery
- Wipe Caches and Dalvik only!!! Don't FullWipe!!!
- Flash ROM
- reboot system
-...you are done"?
deejeey278 said:
i have questions:
- is a polish Polish language?
- right now im in isc
N7000XXLPY_N7000OXALPY_DBT Germany with F-Root-SGN_XX_OXA_LPY-v5.3-CWM5 uploaded with mobileodin without ful wipe i use this instrucion?
"b1 coming from other rooted LPY-ROM or rooted ICS Stock ROM (No Wipe):
- boot in Recovery
- Wipe Caches and Dalvik only!!! Don't FullWipe!!!
- Flash ROM
- reboot system
-...you are done"?
Click to expand...
Click to collapse
These are the correct instruction for your case, taken from the OP of the Rom.
DON'T flash FROM ANY SAMSUNG ICS OR ROMS BASED ON SAMSUNG KERNELS (my CM9, AOSP, etc)
Flash any stock GB rom with odin / or any GB kernel, and reboot into recovery once again before flashing this
Install Rom: http://d-h.st/sGz 171.14 MB
Install HYBRID Gapps: http://tjohansson.is-a-geek.com/file...0511-fixed.zip
Wipe caches, factory reset is a must if you're coming from another rom than CM9
Hope that helps mate!
Yyyyyy no so what i must do?
Sent from my GT-N7000 using xda premium
deejeey278 said:
Yyyyyy no so what i must do?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Its all there mate!
Flash a GB rom with Odin
Reboot in recovery
Flash rom hang Gaps
Full Wipe
Ready!
Sent from my GT-N7000 using Tapatalk 2
sotiris20 said:
Its all there mate!
Flash a GB rom with Odin
Reboot in recovery
Flash rom hang Gaps
Full Wipe
Ready!
Click to expand...
Click to collapse
Inserting a line with "root your GB" wouldn't come amiss in this little set of steps.
chasmodo said:
Inserting a line with "root your GB" wouldn't come amiss in this little set of steps.
Click to expand...
Click to collapse
Or flash a pre-rooted GB ROM.
sotiris20 said:
Its all there mate!
"Flash a GB rom with Odin
Reboot in recovery
Flash rom hang Gaps
Full Wipe
Ready!"
that is, I have to go back to GB and then go to paranoid??
Click to expand...
Click to collapse
deejeey278 said:
that is, I have to go back to GB and then go to paranoid??
Click to expand...
Click to collapse
You have to gain root once you have flashed a GB Rom via PC Odin.
Then you can proceed to flash Paranoid.
Have I lost full root????
chasmodo said:
You have to gain root once you have flashed a GB Rom via PC Odin.
Then you can proceed to flash Paranoid.
Click to expand...
Click to collapse
I came from ICS rocket rom with bad kernel - flashed abyss kernel, rebooted recovery, did full wipe, flashed paranoid android and flashed gapps. All seemed well until I realised I can't paste into /system, am I right in thinking I only have partial root, is there any way to gain full root without wiping back to GB rooted rom and starting over????????
Please Help!!!!
martyj999 said:
I came from ICS rocket rom with bad kernel - flashed abyss kernel, rebooted recovery, did full wipe, flashed paranoid android and flashed gapps. All seemed well until I realised I can't paste into /system, am I right in thinking I only have partial root, is there any way to gain full root without wiping back to GB rooted rom and starting over????????
Please Help!!!!
Click to expand...
Click to collapse
You don't have full root, that is certain. The only way you're gonna regain it is by
going back to rooted GB, then back to ICS.
chasmodo said:
You don't have full root, that is certain. The only way you're gonna regain it is by
going back to rooted GB, then back to ICS.
Click to expand...
Click to collapse
Thanks, that's kind of what i thought.
I have a nandroid backup of rocket rom v22 where I was fully rooted before. If I restore back into it, what's the best method of getting back to PA and still be fully rooted - I have mobile odin pro BTW if that's any use?
martyj999 said:
Thanks, that's kind of what i thought.
I have a nandroid backup of rocket rom v22 where I was fully rooted before. If I restore back into it, what's the best method of getting back to PA and still be fully rooted - I have mobile odin pro BTW if that's any use?
Click to expand...
Click to collapse
Do not do restores through a partially working Recovery, you might mess up your phone.
Do this: http://forum.xda-developers.com/showpost.php?p=25285584&postcount=3
After you are done injecting the CWMR, go to Paranoid thread and follow the instructions.
OMFG i'm an idiot
Well durrrr, just realised I hadn't checked the option for mounting system as writable - I am fully rooted on what is easily the best ROM I've used EVER!!!
Thanks a lot for the replys - this is a much better place thanks to people like you
Contacts
i was a backup contacts in titanumbackup pro now i have paranoid and i cant restor contacts ( titanum says its all restor but in contacts i have nothing - some bug pops up )
deejeey278 said:
i was a backup contacts in titanumbackup pro now i have paranoid and i cant restor contacts ( titanum says its all restor but in contacts i have nothing - some bug pops up )
Click to expand...
Click to collapse
Do you have vcf backup of contacts? I personally have my contacts on google contacts, so whenever I flash a new ROM, contacts restore by syncing google account.
Sent from my GT-N7000 using XDA
My phone running panadroid rom, after wipe data cache and install 4.1.1 rom leak my phone got bootloop. I mean stop at GT 7000 screen or samsung logo or enter the language choice screen then automatic reboot....
Can anybody upload the nandroid backup of 4.1.1 leak. I need it to restore my phone i think that's only way to my phone come up to 4.1.1
Did you tried to reflash the rom?
Or just flash a Safe Kernel like Hydracore first, then full wipes and flash stock ics rom via Odin.
Then reflash Safe Kernel and retry to flash 4.1.1 ROM.
joosh3 said:
Did you tried to reflash the rom?
Or just flash a Safe Kernel like Hydracore first, then full wipes and flash stock ics rom via Odin.
Then reflash Safe Kernel and retry to flash 4.1.1 ROM.
Click to expand...
Click to collapse
Yes i was. But also stop at language choosing screen .
Oh, try to flash another ROM based on XXLS2 Leaked or some custom ROM
Load the *.zip of the ROM on your SD Card and do format /system and all wipes (remember to use safe kernel)
Then flash and i hope it work :crying:
joosh3 said:
Oh, try to flash another ROM based on XXLS2 Leaked or some custom ROM
Load the *.zip of the ROM on your SD Card and do format /system and all wipes (remember to use safe kernel)
Then flash and i hope it work :crying:
Click to expand...
Click to collapse
I haved try alot of custom rom and also stay at language choosing then reboot. I must using nandroid backup to restore to panadroid rom. I thing my devide have problem with flashchip and i need nandroid backup file of 4.1.1 to update to leakrom
Can any body upload your nandroid backup file of 4.1.1 (( Many thankssssssss
That's bad, you never did some Nandroid backup of previous ROM's you used?
If yes try to restore it.
If not im sorry, i don't have what you need :crying:
joosh3 said:
That's bad, you never did some Nandroid backup of previous ROM's you used?
If yes try to restore it.
If not im sorry, i don't have what you need :crying:
Click to expand...
Click to collapse
Yes i have backup of panadroid and restore successfully. But now i can't install JB TW rom anymore
godoflove1988 said:
Yes i have backup of panadroid and restore successfully. But now i can't install JB TW rom anymore
Click to expand...
Click to collapse
The best thing is that your device isn't bricked. Did you tried as i said before? flashing Stock ICS ROM via Odin (not only custom Roms) , then Safe Kernel and start to flash JB ROM from this?
joosh3 said:
The best thing is that your device isn't bricked. Did you tried as i said before? flashing Stock ICS ROM via Odin (not only custom Roms) , then Safe Kernel and start to flash JB ROM from this?
Click to expand...
Click to collapse
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
godoflove1988 said:
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
Click to expand...
Click to collapse
Try to flash this one: N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5
You can download it from here: N7000XXLRQ_N7000DBTLRQ_DBT.zip
After download extract it and flash via Odin.
Hope it work (remember safe kernel)
godoflove1988 said:
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
Click to expand...
Click to collapse
Just boot into Philz recovery and do factory reset. Phone should boot properly after that
Sent from my GT-N7000 using xda app-developers app
I flashed philz-cwm6(safe kernel+recovery). Can i flash Hydracore kernel (.zip) through philz recovery?
mannyvinny said:
I flashed philz-cwm6(safe kernel+recovery). Can i flash Hydracore kernel (.zip) through philz recovery?
Click to expand...
Click to collapse
yes of course :good: ... but please dont say that you want use it on TW JB rom:cyclops:
djoni_gitara said:
yes of course :good: ... but please dont say that you want use it on TW JB rom:cyclops:
Click to expand...
Click to collapse
Does this answer fit for vise versa flashing ?? from hydracore to philz? im using chimera rom with 3.0.15 hydracore v7 and want to flash philz 3.99 XXLSC.
best regards
the rom you are using is not based on TW right? cannot install Philz kernel on any other rom except stock TW roms
nokiamodeln91 said:
the rom you are using is not based on TW right? cannot install Philz kernel on any other rom except stock TW roms
Click to expand...
Click to collapse
So the the rom is not starting ? No problem if a can start recovery after flashing the kernel. After flashing the kernel i want to install an TW rom http://forum.xda-developers.com/showthread.php?t=2079094 . The instruction says:
Installation: use philz TW kernel (i am using philz3.99)
1. download SlimWizz2_Tablet and xplose framework along with xposed app setting module. place these files on sdcard
2. boot in recovery
3. cleanup for new rom flash(use philz menu)
4. install rom
Can i flash it through the recovery of the hydracore??
Yes but there wont be step 3 in hydracore recovery.. so you will need to go to mounts and storage and format /sytstem, data, cache and preload
nokiamodeln91 said:
Yes but there wont be step 3 in hydracore recovery.. so you will need to go to mounts and storage and format /sytstem, data, cache and preload
Click to expand...
Click to collapse
Ok but can i flash the philz Kernel via the recovery from HC ? I want to do the Installation exactly like the instruction...
Yes .. and the phone wont boot but you will have access to Philz recovery..
nokiamodeln91 said:
Yes .. and the phone wont boot but you will have access to Philz recovery..
Click to expand...
Click to collapse
Thank you very much. Now i can safely change my rom.
Have a nice day
Happy flashing
Hi, i am want to do a clean install of CM10 but i am lost and confused.
I have Gb stock Rom 2.3.6 pda: XWJW6 csc: dbtjw2
1- How can i root my phone? I tried everything but i can't. I read in some threads that i should use SuperOneClick, Cm10 thread says that i have to use CF-root...
2- Which version of Clockworkmod Recovery should i use? I have 3e-recovery, is it necessary to install CWM?
3- Do you recommend me to use another kernel, or stock kernel is fine?
4- Are the followings steps correct?
a) Root and install CWM
b) Wipe Data (I dont want to backup my data)
c) Install Cm10
d) Install Gapps
e) Install Kernel (If necessary)
Thank you, and i know that all the info is in other threads, but i am confused!.
yoboo said:
Hi, i am want to do a clean install of CM10 but i am lost and confused.
I have Gb stock Rom 2.3.6 pda: XWJW6 csc: dbtjw2
1- How can i root my phone? I tried everything but i can't.
2- Which version of Clockworkmod Recovery should i use?
3- Do you recommend me to use another kernel, or stock kernel is fine?
4- Are the followings steps correct?
a) Root and install CWM
b) Wipe Data (I dont want to backup my data)
c) Install Cm10
d) Install Gapps
e) Install Kernel (If necessary)
Thank you, and i know that all the info is in other threads, but i am confused!.
Click to expand...
Click to collapse
Yes, these are basically the right steps. But don't forget to wipe cache. An instruction how to flash CM10 i also given in the theard of CM10 for your phone
temeritas said:
Yes, these are basically the right steps. But don't forget to wipe cache. An instruction how to flash CM10 i also given in the theard of CM10 for your phone
Click to expand...
Click to collapse
Thanks!:good:
What about kernel and version of CWM?
Anyone??
yoboo said:
Anyone??
Click to expand...
Click to collapse
Just flash cf root kernel using Odin to get root and cwm recovery. Then flash the cm10 zip and gapps.
Sent from my Galaxy Nexus using xda premium
NIMBAH said:
Just flash cf root kernel using Odin to get root and cwm recovery. Then flash the cm10 zip and gapps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you! What about using semaphore kernel?? And just doing cf root I get cwm recovery??
Thank you again!!!!
yoboo said:
Thank you! What about using semaphore kernel?? And just doing cf root I get cwm recovery??
Thank you again!!!!
Click to expand...
Click to collapse
Semaphore kernel is inside the CM10 zip so it will get automatically installed when your flash the zip.
Yes CWM recovery is built into cf root kernel.
Also when you flash the Cm10 zip remember your phone will restart almost straight away and go into boot loop. This is because the partition layout is being changed.
Just reinsert the battery and boot into recovery again. Flash the cm10 zip again and this time it will finish installation.
& its no problem
Sent from my Galaxy Nexus using xda premium
NIMBAH said:
Semaphore kernel is inside the CM10 zip so it will get automatically installed when your flash the zip.
Yes CWM recovery is built into cf root kernel.
Also when you flash the Cm10 zip remember your phone will restart almost straight away and go into boot loop. This is because the partition layout is being changed.
Just reinsert the battery and boot into recovery again. Flash the cm10 zip again and this time it will finish installation.
& its no problem
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank youuu!!!!!
I'm going to try it! Maybe I send you a pm if I have a doubt of course if it isn't a problem
Hi everyone!
Maybe I have a basic doubt, but because I don´t understand, I like have clear this. Yesterday I decided root, replace the recovery and install a custom rom on my Note (N7000). I choose the kernel from PhilZ and install following the recommended method (very easy).
After this all work perfect, I do a full backup of actual system (this is nandroid backup, right?) and after this I install the CM 10.1.3 that also work well. I not rememeber exactly, but following some steps to install this ROM I do before or after install this procedures also: WIPE/DATA FACTORY RESET, WIPE CACHE, WIPE DALVIK CACHE. This procedures are correct?
The device work well, but I have a big doubt because if I boot into recovery I not see anymore the PhilZ touch interface, now I see:
CWM Based Recovery 6.0.3.6
that is other recovery, right? Is normal this behavior? I not understand in what step I change the PhilZ recovery to CWM.
Thanks in advance for all info and help to clear this
This is the CWM recovery same as philz, the difference is that, the version you used before.. It was touch, and after flashing the recovery changes as the CM 10.1 flashed their own kernel...
so it is the same recovery, do not worry
and yes, AOSP/CM roms have their specific kernels, so please do not flash philz on the current recovery...
and one more thing... the process is correct, do a wipe data and factory reset and then format system and preload
Thanks NoteboyTech, yes, I know that work basically like PhilZ, but my main doubt is in what moment of all procedures are installed the CWM Based Recovery. This mean that this CWM are installed in the moment that I install the CM 10.1.3?
Now if I like keep the PhilZ, is safe if I boot again in recovery and install from the .zip file from PhilZ again? or not recommend this?
The wipe: I need made the wipe factory, cache and dalvik before each time that I like restore a ROM or also kernel?
Thanks!!!
You are using a cm rom. Philz kernel Tw doesn't work with cm rom. If you flash philz on cm, phone won't boot.
There is no need to wipe if you just changing the kernel.
If you want the touch recovery, you can install nx kernel which includes philz recovery and is a cm based kernel.
Sent from my GT-I9500 using xda premium
DroidAR said:
Thanks NoteboyTech, yes, I know that work basically like PhilZ, but my main doubt is in what moment of all procedures are installed the CWM Based Recovery. This mean that this CWM are installed in the moment that I install the CM 10.1.3?
Now if I like keep the PhilZ, is safe if I boot again in recovery and install from the .zip file from PhilZ again? or not recommend this?
The wipe: I need made the wipe factory, cache and dalvik before each time that I like restore a ROM or also kernel?
Thanks!!!
Click to expand...
Click to collapse
Read my post again, I edited it!!!
Thanks to all!
Now I believe that understand a bit more
Perfect. This mean that if I like keep the PhilZ as recovery I need install the nx kernel, right?
Now, if for example in the future I like try one new version or actual version of my stock ROM, is safe to download from Samsung Updates website, install from .zip like I do with the CM, and ready, I have the stock ROM. Is correct?
OK, I not need wipe anything for kernel installations, but yes for ROMs, right?
Only data/factory and cache or also dalvik?
This wipes I need made before install the ROM or after?
Thanks for all!
Stock rom has be be installed using odin not like the cm
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
Stock rom has be be installed using odin not like the cm
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Thanks!, ah, right, because stock rom´s should be installed using download mode instead recovery mode, right?
And the last: all the native apps from Samsung like SPen, etc, that go with the stock rom, I can download from any place or installed now into the CM 10.1 or future versions of CM? Thanks!
DroidAR said:
And the last: all the native apps from Samsung like SPen, etc, that go with the stock rom, I can download from any place or installed now into the CM 10.1 or future versions of CM? Thanks!
Click to expand...
Click to collapse
Sorry bro, CM roms cannot do TW features like SNOTE, SPEN, and all.. so with CM you loose all samsung goodies..
NoteboyTech said:
Sorry bro, CM roms cannot do TW features like SNOTE, SPEN, and all.. so with CM you loose all samsung goodies..
Click to expand...
Click to collapse
Ups! :S Small detail Thanks!
One more that I detect: when I boot into recovery (CWM-based Recovery v6.0.3.6) I see that the last and bottom line on main screen say this message bellow. Its important this? Thanks!
Code:
Warning: No file_contexts
Nothing wrong with it. Comes on new Cwm recovery.
Sent from my GT-I9500 using xda premium
Today I try make a complete nandroid backup, but can be possible that the CWM Based Recovery 6.0.3.6 don´t have this option?
Some days back, with the PhilZ recovery, I can do very easy.
To restore a nandroid backup I need use the same recovery or the generated files are compatible with all recovery?
????
CWM 6 versions are compatible.. it can be restored using any recovery.
Why can you make a nandroid back on 6.0.3.6?
Main Menu> Backup & Restore> Backup to Internal or External SD
nokiamodeln91 said:
????
Click to expand...
Click to collapse
Thanks nokiamodeln91!, maybe yesterday when I try Im a bit sleepy at night Also in this moment I found a "nandroid" name into the menu.
Have a link to read how backup the IMEI number?
Can be possible that I detect that after I made all these changes (change the recovery, root, install new rom, etc) the Serial number of the device has changed? I can change from any area to the original one?
Option to backup efs is in the philz recovery. Or you can use ktool from the playstore to backup efs. This has to be done as soon as you root. There is no point of backup if the imei has already changed.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
Option to backup efs is in the philz recovery. Or you can use ktool from the playstore to backup efs. This has to be done as soon as you root.
Click to expand...
Click to collapse
OK, as already tell me I can´t install the PhilZ recovery on CM 10.2, this mean that my only option is install the ktool and backup EFS (this backup the IMEI), right?
nokiamodeln91 said:
There is no point of backup if the imei has already changed.
Click to expand...
Click to collapse
No, the IMEI is correct, the change is in the SERIAL NUMBER of the device, not IMEI. This can be fixed writing the correct serial number?
Not sure how to correct the serial number.
Ktool is a good tool to backup efs.
Sent from my GT-I9500 using xda premium