Database Develop

[Q] CAN'T connect to PLAY STORE after update to 4.3.1 (cm 10.2.20131102-SNAPSHOT -M1)

Wish I stayed with 4.2.2
This was allegedly a STABLE version as those are the only ones Im pdating to per my CM update settings.
I do not use nightlies.
Unfortunately I lost connection to GOOGLE PLAY STORE on both of my Nook hd+ tablets...same night I ran the update to 4.3 from 4.2
Im getting the constant *No connection..Retry* error.
Watched many *fix-it* videos on YouTube.....none of the tricks worked.
cleared, data, cache, force stopped, rebooted, unistalled, reinstalled......nothing.
unistalled again 4.4.21 and even istalled the latest 4.4.22 Gogle play store......still the same error.
very frustrated since this was allegedly a STABLE version.
Now I cannot access the Play Store with both of our tablets.
Any advice will be greatly appreciated !

Did you remember to upgrade your gapps when you moved to cm 10.2? It requires 20130813.
Sent from my BN NookHD+ using xda premium

leapinlar said:
Did you remember to upgrade your gapps when you moved to cm 10.2? It requires 20130813.
Sent from my BN NookHD+ using xda premium
Click to expand...
Click to collapse
That did the trick.....
I remember the need for new gaps when 4.3 came out a while ago.
I thought it needed to be done only then by those that wanted to upgrade early.
I (wrongly) presumed that the new gapps would be included with new 'stable' versions CM ROMs.
(Especially since no warning or instructions for new gapps popped up during 4.3 installation).
Now I know that gapps is something that always needs to be installed separately.
Thank you for your reply leapinlar !!

Where can I download 20130813? When I go to goo.im I get "The file you requested was not found"

Mugby said:
Where can I download 20130813? When I go to goo.im I get "The file you requested was not found"
Click to expand...
Click to collapse
That is not the whole name. It is gapps-jb-20130813-signed.zip.
Sent from my BN NookHD+ using xda premium

leapinlar said:
That is not the whole name. It is gapps-jb-20130813-signed.zip.
Sent from my BN NookHD+ using xda premium
Click to expand...
Click to collapse
Yes, and none of the links work

File appears to be down for now. Try searching the web for alternate locations using the full name.
Sent from my BN NookHD+ using xda premium

leapinlar said:
File appears to be down for now. Try searching the web for alternate locations using the full name.
Sent from my BN NookHD+ using xda premium
Click to expand...
Click to collapse
I got mine from here:
http :// www . androidfilehost. com/? fid=23060877490000124
(please put the link together. I a mnot able to post since I have only a few posts)
Installing new gapps solved the problem. Thank you again, leapinlar !
PS:
I am either getting too old or blind or cognitively challenged, but this forum has
the most difficult (I am trying to be nice here IMAGE VERIFICATION system I have ever encountered.

WatchFan1 said:
I got mine from here:
http :// www . androidfilehost. com/? fid=23060877490000124
(please put the link together. I a mnot able to post since I have only a few posts)
Installing new gapps solved the problem. Thank you again, leapinlar !
PS:
I am either getting too old or blind or cognitively challenged, but this forum has
the most difficult (I am trying to be nice here IMAGE VERIFICATION system I have ever encountered.
Click to expand...
Click to collapse
There is no need to look for newer version of Gapps. Just follow the guide below
techkhoji.com/android/no-connection-retry-google-play-store

nexusguy7 said:
There is no need to look for newer version of Gapps. Just follow the guide below
techkhoji.com/android/no-connection-retry-google-play-store
Click to expand...
Click to collapse
The guide you linked attempts to look for solutions to the issue, which may not solve the issue.
The best/only way is to update gapps if you upgrade your Android version.
You can download all gapps from here: http://goo.im/gapps (they are current changing servers which host the files, so you may run into problems if you try right now; later on should be perfect).
All the best.

leapinlar said:
Did you remember to upgrade your gapps when you moved to cm 10.2? It requires 20130813.
Sent from my BN NookHD+ using xda premium
Click to expand...
Click to collapse
I have the same issue and I did update the gapps after I updated to the cm10.2. But I still can't access the store. I have internet, but nothing Google. I've flashed gapps twice after realizing I had no play access. Any ideas?

eddytholland said:
I have the same issue and I did update the gapps after I updated to the cm10.2. But I still can't access the store. I have internet, but nothing Google. I've flashed gapps twice after realizing I had no play access. Any ideas?
Click to expand...
Click to collapse
Have you tried clearing the cache for the store? Do you use any custom resolutions or DPI settings?

jpisini said:
Have you tried clearing the cache for the store? Do you use any custom resolutions or DPI settings?
Click to expand...
Click to collapse
all i did was do an upgrade. then loaded the appropriate gapps.zip. idk how to delete the cache from the store itself. also whenever i try to use anything google related, it basically cause the gapps process to force close.

Go to settings apps all you will find all the Google apps listed there. If that doesn't work do a factory reset and try again,
Sent from my Nook HD+ using xda app-developers app

I had all the same issues, but when i rent to a rest i still didn't have any Google services. I tried a new cw11 nightly and now i can't get past the nook boot screen. Hiw do i get back to a functional nook hd+?

silinthar said:
I had all the same issues, but when i rent to a rest i still didn't have any Google services. I tried a new cw11 nightly and now i can't get past the nook boot screen. Hiw do i get back to a functional nook hd+?
Click to expand...
Click to collapse
To get back to a functional HD/HD+, go to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD. Use that to flash a plain stock zip from item 6 followed by a factory reset with CWM. That should take you back to stock and you should be able to start over.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
To get back to a functional HD/HD+, go to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD. Use that to flash a plain stock zip from item 6 followed by a factory reset with CWM. That should take you back to stock and you should be able to start over. =QUOTE]
If I Create a CWM SD will it boot up? I'm not even getting past the nook screen of the bootscreen. I can't get to a recovery menu to even load a mod.
Click to expand...
Click to collapse

silinthar said:
leapinlar said:
To get back to a functional HD/HD+, go to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD. Use that to flash a plain stock zip from item 6 followed by a factory reset with CWM. That should take you back to stock and you should be able to start over. =QUOTE]
If I Create a CWM SD will it boot up? I'm not even getting past the nook screen of the bootscreen. I can't get to a recovery menu to even load a mod.
Click to expand...
Click to collapse
It should, but others have reported problems getting a CWM SD to boot after installing CM11 and CWM 6045+ to internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse

leapinlar said:
silinthar said:
It should, but others have reported problems getting a CWM SD to boot after installing CM11 and CWM 6045+ to internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I'll give it a try.
Click to expand...
Click to collapse

silinthar said:
leapinlar said:
I'll give it a try.
Click to expand...
Click to collapse
Nope, didn't work. My NookHD+ doesn't gets passed the Nook boot screen. Is there something I'm missing that can at least get me passed the Nook boot screen or is it just toast?
Click to expand...
Click to collapse

Nook HD+ Self-Restore?

I have a Nook HD+ that had CM11 installed on it, but recently, the boot time on it went from just under a minute to five minutes (with a 50/50 fail rate). After a failed reboot, I forced it off and turned it back on, only to discover later on that the stock firmware installed it'self back on. Can this happen? What could have caused this?

If you still had stock recovery installed on internal memory the Nook has a boot failure repair mechanism where if it fails to complete a boot 8 times in a row it initiates a self repair where it reinstalls the factory ROM to itself. If you had CWM or TWRP installed to internal memory replacing stock recovery, it will still try to repair itself after an 8 failed boot but will not complete the repair without stock recovery.
Sent from my BN NookHD+ using XDA Premium HD app

Welp, good thing I have a backup. Too bad it's not too recent...
Was there a section on installing CWM in your thread? I don't quite remember seeing it.

spice002 said:
Welp, good thing I have a backup. Too bad it's not too recent...
Was there a section on installing CWM in your thread? I don't quite remember seeing it.
Click to expand...
Click to collapse
If you are talking about the dummies thread, yes, the instructions say to download and install 3 files. One of them is CWM for internal memory. (Edit: But now after looking back at what you installed it was CM11 and my dummies thread does not cover CM11. You must have followed some other guide)
Sent from my BN NookHD+ using XDA Premium HD app

I think I followed one of your guides, but in place of 10.2, I used a CM11 build I found on the Cyanogenmod wiki.

spice002 said:
I think I followed one of your guides, but in place of 10.2, I used a CM11 build I found on the Cyanogenmod wiki.
Click to expand...
Click to collapse
The warning in my guide says not to go that!
Sent from my BN NookHD+ using XDA Premium HD app

[Q] upgrading Nook Hd+ from 10.1.3 to 11M6

I want to upgrade to 11 releases but not able to do it. initially it was due to the CWM. now i have the latest cwm installed.
I followed http://forum.xda-developers.com/showthread.php?t=2602796
but everytime after installing all the thre zips( recovery,Cm11,pa gapps ) when i reboot it is simply stuck at cyanoboot universal bootloader logo.only option i have is put the micro sd in and reboot and restore the back up again.
Can anyone help me on this. i dis the install after factory reset so it's clean.
one thing i do noticed is the CM11 got installed within 2-3 seconds. is this supposed to be so quick.
I already tried the full process twice but no luck. :crying:

It is not supposed to be that fast. You probably have a bad download. Start over.
Sent from my BN NookHD+ using XDA Premium HD app

It Worked. Finally.
leapinlar said:
It is not supposed to be that fast. You probably have a bad download. Start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I was finally able to make it work. i redownloaded and instead of putting in in internal memory kept it in sd card only and installed from there. this time the installation worked.
Kitkat is much smoother in nook.
Loving it.
Thanks.

[Q&A] [Nook HD/HD+][SD Install][4.4] CM11.0 (KitKat) Updated 08/05

Q&A for [Nook HD/HD+][SD Install][4.4] CM11.0 (KitKat) Updated 08/05
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Nook HD/HD+][SD Install][4.4] CM11.0 (KitKat) Updated 08/05. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Nook HD+ HDMI Video but no sound - bokbokan SD bootable
I have a Nook HD+ and I'm using bokbokan's cyanogenmod bootable SDcard image. When I connect an HDMI cable I'm getting video but no sound. Anyone else experience this or know how to fix?
link to bokbokan thread that I used to create the bootable SDcard image: http://forum.xda-developers.com/showthread.php?t=2583952

No Joy
Regardless of which build or method I use, nightly or otherwise, SD, EMMC, or Updating from within CM10, I've never been able to get CM11 working on my Nook HD+ 16GB. Each try ends in my device getting stuck on the cyanogenmod boot screen (revolving arrow). The only recovery is to flash back to CM10. Any ideas?

n122vu said:
Regardless of which build or method I use, nightly or otherwise, SD, EMMC, or Updating from within CM10, I've never been able to get CM11 working on my Nook HD+ 16GB. Each try ends in my device getting stuck on the cyanogenmod boot screen (revolving arrow). The only recovery is to flash back to CM10. Any ideas?
Click to expand...
Click to collapse
Which version of CWM are you using? It must be v6045 or newer.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Which version of CWM are you using? It must be v6045 or newer.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I'm using NookHDplus-CWM-6046-for-internal-memory-rev0-(07-13-14)

n122vu said:
I'm using NookHDplus-CWM-6046-for-internal-memory-rev0-(07-13-14)
Click to expand...
Click to collapse
The SD image in my original post works fine for me on an Nook HD+ 16GB.
http://forum.xda-developers.com/showthread.php?t=2583952
My only issue is that I get no sound when I connect HDMI out to my TV.

n122vu said:
I'm using NookHDplus-CWM-6046-for-internal-memory-rev0-(07-13-14)
Click to expand...
Click to collapse
Are you factory reseting with CWM after flashing the ROM?
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Are you factory reseting with CWM after flashing the ROM?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Yes, doing a Factory Reset. Also have tried clearing and not clearing cache, neither seemed to have any effect.

Thanks for your attention. It looks like I've found a build that works. cm-11-20140804-SNAPSHOT-M9-ovation.zip installed and booted rather quickly. None of the other nightly or official/unofficial builds seem to have worked, but I'm up and running now.
Regards,
n122vu

Help
Ok so I managed to install cm-11-20140706-UNOFFICIAL-bok-ovation. Installation ran smoothly and everything was fine (kitkat running ok and I was able to go into main menu etc.), until I powered off the device. I remembered the display sort of paused for a brief moment and the device powered down. As I turned it back on, it boots back to the original factory rom.
I've lost my back up rom and cynoboot now only allow selection of either no.1 (boot from Stock ROM), or no. 4 (boot CWM recovery).
I have tried installing the newer ROM (cm-11-20140804-UNOFFICIAL-bok-ovation) but it says E: Can't Open /emmc /cm-11-20140804-UNOFFICIAL-bok-ovation.zip (bad) -tried downloading the file again with same result..
Out of desperation I tried all the menu functions from wiping and formatting to hard resetting it, but nothing happens. It can still boot to Stock ROM fine though. Any help to get this thing rooted with kitkat running is much appreciated..

Patience is the key ...
n122vu said:
Regardless of which build or method I use, nightly or otherwise, SD, EMMC, or Updating from within CM10, I've never been able to get CM11 working on my Nook HD+ 16GB. Each try ends in my device getting stuck on the cyanogenmod boot screen (revolving arrow). The only recovery is to flash back to CM10. Any ideas?
Click to expand...
Click to collapse
Patience. No, I'm not good at it either, but combined with the slower operations on the bootable microSD card, I had to wait about 15-20 minutes for the revolving arrow to stop. Touch the screen occasionally, so that the processor stays up to speed (I shouldn't think that necessary, but it stopped revolving when I touched the screen after about 20 minutes).

Noob Questions
I realize these questions will likely seem obvious to everyone, but I couldn't find an answer looking through the forum, so I figured I would ask before proceeding to try this;
The instructions say to download the SD Card Image - I see the links under "SD Card Images", but I also see similar looking links under "Cyanoboot Sources"
Example: SD Card Images: HD: sdcard-hummingbird-cm11.0-v1.img
Cyanoboot Sources: HD: u-boot-hummingbird-cm11.tgz
My question is are these the same thing? Do I need both? One or the other?
Maybe some helpful info: I have a Stock Nook HD 8gb running 2.2.0, never done anything to it other than the factory updates.
Thanks in advance.

Thanks for the great posts
I want to thank everyone for the outstanding work here that allowed a complete noob to take my stale 2 year old Nook HD from blah to WOW in a few simple steps.
I really worried about getting a good SD card, but I was able to exFat format an ADATA 64GB Class 10 card which then tested to 1.62 MB/s on Random Write 4KB (QD=32) on CrystalDiskMark (5 iterations, 50MB). Already owned it as I actually purchased it for the nook, but it seemed like it would not store on the external card.
I followed the instructions exactly as posted on page 1 of this thread and I have the following results: (All confirmed with Screenshots I hope will post)
Total space: 57.12GB! (dramatic improvement over factory Nook HD)
Up time: 18+ hours and going strong with NO forced restarts
Android Version: 4.4.4!

update installation steps
Hello,
I have the August update installed for the cm11 sd install on the hd+. Simple question:
What's the procedure to install the updated Rom(11/23)? Do I just boot to recovery and
flash the Rom? Or do I have to do some other things ( wipe? and/or flash gapps?).
Thanks

rjolbrich said:
Hello,
I have the August update installed for the cm11 sd install on the hd+. Simple question:
What's the procedure to install the updated Rom(11/23)? Do I just boot to recovery and
flash the Rom? Or do I have to do some other things ( wipe? and/or flash gapps?).
Thanks
Click to expand...
Click to collapse
If you mean the updated 11/22 version that bokbokan posted earlier, yes, just flash with no wiping.
Sent from my BN NookHD+ using XDA Premium HD app

is there an update to this version (HD: cm-11-20141122-UNOFFICIAL-bok-hummingbird)
I used the install process at http://forum.xda-developers.com/showthread.php?t=2583952 to install HD: cm-11-20141122-UNOFFICIAL-bok-hummingbird - Dev-Host | Android File Host, and the gap below that, and followed all the instructions below that. KK woks fine on my nook hd, except that I am unable to use kobo, as it can't find my connection to allow me to sign in, and also can't use another app because when I try to aces it's store for my previous purchases I get an SSL error. Is there any way to update this version of KK I installed, or is there a different way to do this so that I can update on a regular basis? Thanks

mitchellfox said:
I used the install process at http://forum.xda-developers.com/showthread.php?t=2583952 to install HD: cm-11-20141122-UNOFFICIAL-bok-hummingbird - Dev-Host | Android File Host, and the gap below that, and followed all the instructions below that. KK woks fine on my nook hd, except that I am unable to use kobo, as it can't find my connection to allow me to sign in, and also can't use another app because when I try to aces it's store for my previous purchases I get an SSL error. Is there any way to update this version of KK I installed, or is there a different way to do this so that I can update on a regular basis? Thanks
Click to expand...
Click to collapse
If you want to keep using this SD based kk, you have no choice but to wait for bokbokan to update to a new version. Other versions of kk will not work on the SD setup.
Sent from my BN NookHD+ using XDA Premium HD app

As Spock used to say, there are always possibilities
mitchellfox said:
Is there any way to update this version of KK I installed, or is there a different way to do this so that I can update on a regular basis? Thanks
Click to expand...
Click to collapse
There is Verygreen's SD-bootable variant (HD+ only): http://forum.xda-developers.com/showthread.php?t=2600572

cm_cache not on EMMC
Is there the option of moving the cm_cache off of the EMMC? My EMMC is trim bricked and doesn't work; I am trying to figure out how to move cm_cache to the SD card.

joe8mofo said:
Is there the option of moving the cm_cache off of the EMMC? My EMMC is trim bricked and doesn't work; I am trying to figure out how to move cm_cache to the SD card.
Click to expand...
Click to collapse
Search the forum for the term noemmc. Verygreen made an SD version of CM so it does just that for bricked emmcs.
Sent from my BN NookHD+ using XDA Premium HD app

If I want 4.4 on HD+ which way should I go?

I'm wanting to put 4.4 or what ever is latest stable on my HD+. I have a Mac so the win disk image tool won't do me any good.
Which thread should I look at? There are so many release and threads. I want to use the SD card for the new OS. Not to blow away my current Nook OS.
Thanks,
Steve

piperman7 said:
I'm wanting to put 4.4 or what ever is latest stable on my HD+. I have a Mac so the win disk image tool won't do me any good.
Which thread should I look at? There are so many release and threads. I want to use the SD card for the new OS. Not to blow away my current Nook OS.
Thanks,
Steve
Click to expand...
Click to collapse
I'm not sure there is a version of CM11 that can run on SD, but there are many CM10 -CM10.2 threads that give files and instructions.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
I'm not sure there is a version of CM11 that can run on SD, but there are many CM10 -CM10.2 threads that give files and instructions.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
With the CM11 install that I have seen on here, does it boot straight into 4.4 no Nook at all? If so what happens to my current data?
I don't mind if it runs 4.4 or was even looking at the CM12.1. I have an iPad Air that I mostly use, but love this Nook and have had it for a while, I figured that I would make use of it.

piperman7 said:
With the CM11 install that I have seen on here, does it boot straight into 4.4 no Nook at all? If so what happens to my current data?
I don't mind if it runs 4.4 or was even looking at the CM12.1. I have an iPad Air that I mostly use, but love this Nook and have had it for a while, I figured that I would make use of it.
Click to expand...
Click to collapse
If you run CM11 or CM12 it directly replaces the ROM and data already there. No stock is left. All data is wiped.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
I'm not sure there is a version of CM11 that can run on SD, but there are many CM10 -CM10.2 threads that give files and instructions.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Actually either verygreen and bokbokan released sdcard builds of cm11 for ovation, but they were updated last november.
http://forum.xda-developers.com/showthread.php?t=2600572
There are no instructions for SD card install in verygreenś thread, but I think you can follow the same procedure detailed in cm10.x sdcard instrucutions.

I did a CM11 install that is in leapinliar's post, was pretty easy to do.
If I wanted to update to CM12.1 or put twrp on what would I need to do?

piperman7 said:
I did a CM11 install that is in leapinliar's post, was pretty easy to do.
If I wanted to update to CM12.1 or put twrp on what would I need to do?
Click to expand...
Click to collapse
I think leapilar listed almost everything useful to nook hd(+) in his signature.
IIRC, I took these steps to have both recovery and rom in my ovation emmc:
1) create a micro SD card with a recovery (you probably did it already when flashed cm11)
2) Download a newer (cm12 compatible) recovery and copy to sdcard (I'm using emmc twrp 2.8.6.0 built by amaces but there are older builds compatible, including cwm)
3) flash recovery (it'll replace nook stock recovery with the one you're flashing. People says it may be more difficult to fix your nook in case you experience emmc issues. I've never had any issues so I can't tell)
4) reboot to newer recovery, wipe /data, /cache, /dalvik-cache and /system, then flash cm12.1 rom with cm12.1 gapps (cm12 gapps won't work in cm12.1 and vice versa)
PS: I'm afraid .img files aren't flashable via recovery. To flash 2.8.6.0 I used Flashify. You can get it in play store and use it if you are rooted. This will make the process a lot easier since you won't need to prepare an sdcard.