I HAVE AN URGENT PROBLEM With my Samsung S I9000 - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey Guys i have a very serious plrobleme with my samsung Galaxy S
i tried to flash him and install Android 4.3 JB but i ended up deleting the current systeme and the phone w'ont Work he is stuck in the boot loop
PLEASE How i can recover it and get it back..​:crying:

Τry to flash via odin semaphore kernel (3.3.0 for 4.3) the .tar link and post how it went.

ioannis_m said:
Τry to flash via odin semaphore kernel (3.3.0 for 4.3) the .tar link and post how it went.
Click to expand...
Click to collapse
The phone:: when i clic on the power button it redirect from the boot loop [GALAXY Si900] to the recovery menu.
i want to flash my phone like the first time i bought it.
please tell me how EXACLY how to restore my old phone back with normal systeme.
please be specific i want NO MISTAKE
my phone info
Samsung Galaxy S i9000
first system ;: Android 2.2update-1
**
please im beggin you how i fix it

rabidi said:
The phone:: when i clic on the power button it redirect from the boot loop [GALAXY Si900] to the recovery menu.
i want to flash my phone like the first time i bought it.
please tell me how EXACLY how to restore my old phone back with normal systeme.
please be specific i want NO MISTAKE
my phone info
Samsung Galaxy S i9000
first system ;: Android 2.2update-1
** I9000XWJW6
please im beggin you how i fix it
Click to expand...
Click to collapse
If you have done a factory reset everything during the process it can't be like your old phone again (messages,data of apps,call logs ) will be lost if you havent saved them before flashing 4.3.Only pictures and videos will still be there (hopefully).
I suggest you search the xda i9000 forum in how to flash with odin any firmware (2.2.x,2.3.x etc) and start over again.Check first if your mobile goes into download mode.(pres vol down+home+power button.)

rabidi said:
Hey Guys i have a very serious plrobleme with my samsung Galaxy S
i tried to flash him and install Android 4.3 JB but i ended up deleting the current systeme and the phone w'ont Work he is stuck in the boot loop
PLEASE How i can recover it and get it back..​:crying:
Click to expand...
Click to collapse
just restore stock 2.2/2.3 ROM through odin via download mode.

ioannis_m said:
If you have done a factory reset everything during the process it can't be like your old phone again (messages,data of apps,call logs ) will be lost if you havent saved them before flashing 4.3.Only pictures and videos will still be there (hopefully).
I suggest you search the xda i9000 forum in how to flash with odin any firmware (2.2.x,2.3.x etc) and start over again.Check first if your mobile goes into download mode.(pres vol down+home+power button.)
Click to expand...
Click to collapse
i dont want to get my data back i just want my phone to work i want to install an android systeme any one
i want to know how from A to Z everything
can you tell me how i can make my phone work again :crying:

Search on YouTube!
Sent from my GT-I9000 using XDA Premium 4 mobile app

rabidi said:
i dont want to get my data back i just want my phone to work i want to install an android systeme any one
i want to know how from A to Z everything
can you tell me how i can make my phone work again :crying:
Click to expand...
Click to collapse
use this guide, everything you need to know has beeen mentioned, if not clear , ask. Follow the guide and flash the Gingerbread 2,3,6 stock ROM, than gradually upgrade to any other ROM you like.
Check this out! Links to useful Guides and " Banned " Documentaries ​

Related

Recover Samsung Galaxy Note

Hi people. By one mistake i've flashed a ROM to Samsung Galaxy SII on Samsung Galaxy Note. Now I need to recover it because I've not maked a backup (I know that was an big mistake). In Samsung Galaxy S I usually flash a good kernel with Odin and after that I flash a good ROM and it make the phone work with the old data but it don't was the binary counter like Samsung Galaxy Note. If I can't recover it without ODIN i think that I can buy a USB JIG for Note and put the binary counter to zero.
Any idea about what can I do?
thanks
pauloallex24 said:
Hi people. By one mistake i've flashed a ROM to Samsung Galaxy SII on Samsung Galaxy Note. Now I need to recover it because I've not maked a backup (I know that was an big mistake). In Samsung Galaxy S I usually flash a good kernel with Odin and after that I flash a good ROM and it make the phone work with the old data but it don't was the binary counter like Samsung Galaxy Note. If I can't recover it without ODIN i think that I can buy a USB JIG for Note and put the binary counter to zero.
Any idea about what can I do?
thanks
Click to expand...
Click to collapse
Can you reach Download Mode? Press Volume Down + Home Button + Power Button simultaneously (press Power the last) and hold.
chasmodo said:
Can you reach Download Mode? Press Volume Down + Home Button + Power Button simultaneously (press Power the last) and hold.
Click to expand...
Click to collapse
Yes, yes.
But I need a flashable kernel via Odin and I cant found it :s
pauloallex24 said:
Yes, yes.
But I need a flashable kernel via Odin and I cant found it :s
Click to expand...
Click to collapse
OK, as long as you can get into Download Mode, we'll get you out of trouble.
Download this file.
Password : samfirmware.com
Extract the files from the zip in a folder on your PC. This is the Rom you're going to flash.
Then download Odin if you don't have it.
Then go to this post and follow the instructions to the letter. That's an easy guide for flashing Roms using Odin, with pictures and all. Your Rom belongs to
- If your downloaded ROM contains single file
part of instructions.
After flashing your phone, it will reboot. Sometimes your Note can get stuck in a bootloop at this point. If it happens, don't panic. Pull out your battery, wait for a bit, put it back. Put your phone into Recovery mode by pressing
Volume Up + Home + Power
Once in recovery, do a factory reset and reboot. Everything should be fine.
Once all this is done, you'll have a stock Rom. If you want to root it, tell me, and I'll walk you through.
Hope this helps.
chasmodo said:
OK, as long as you can get into Download Mode, we'll get you out of trouble.
Download this file.
Password : samfirmware.com
Extract the files from the zip in a folder on your PC. This is the Rom you're going to flash.
Then download Odin if you don't have it.
Then go to this post and follow the instructions to the letter. That's an easy guide for flashing Roms using Odin, with pictures and all. Your Rom belongs to
- If your downloaded ROM contains single file
part of instructions.
After flashing your phone, it will reboot. Sometimes your Note can get stuck in a bootloop at this point. If it happens, don't panic. Pull out your battery, wait for a bit, put it back. Put your phone into Recovery mode by pressing
Volume Up + Home + Power
Once in recovery, do a factory reset and reboot. Everything should be fine.
Once all this is done, you'll have a stock Rom. If you want to root it, tell me, and I'll walk you through.
Hope this helps.
Click to expand...
Click to collapse
Thank you. But with this file I just can flash an entire ROM and I go lost my data and that is a trouble to me :s
I need a flashable kernel with CWM just this. After that I will install my old ROM and recover my data and after this I will make a new clean install. This is what I make in Galaxy S and I hope it work on Galaxy Note.
I cant lose the data in my phone :s
pauloallex24 said:
Thank you. But with this file I just can flash an entire ROM and I go lost my data and that is a trouble to me :s
I need a flashable kernel with CWM just this. After that I will install my old ROM and recover my data and after this I will make a new clean install. This is what I make in Galaxy S and I hope it work on Galaxy Note.
I cant lose the data in my phone :s
Click to expand...
Click to collapse
When flashing SGSII Rom on Note you have ruined your bootloader, so I'm afraid there's no way you are going to get your old Rom back, sorry.
chasmodo said:
When flashing SGSII Rom on Note you have ruined your bootloader, so I'm afraid there's no way you are going to get your old Rom back, sorry.
Click to expand...
Click to collapse
I Know, but is what I say. In Galaxy S I can flash one bootloader (I miss this part) and after a kernel xP
If it don't exist to Galaxy Note I can't but if exist I can
Hi. I found a flashable speedmod on his original website and flash it. Now I'm in recovery flashing my old ROM. I will say the final result soon.
pauloallex24 said:
I Know, but is what I say. In Galaxy S I can flash one bootloader (I miss this part) and after a kernel xP
If it don't exist to Galaxy Note I can't but if exist I can
Click to expand...
Click to collapse
I realize what your saying here but the general consensus seems to be that separate flashing of various parts of the phone like a bootloader, radio, kernel, and ROM as individual items might not be a viable option on the Galaxy Note.
Hi. I found a flashable speedmod on his original website and flash it. Now I'm in recovery flashing my old ROM. I will say the final result soon.
EDIT: Work Im in mu old ROM ^^
Thank everyone that help me
Did i miss it, or did you actually say, why, you flashed a S2 rom on your note?
graemeg said:
Did i miss it, or did you actually say, why, you flashed a S2 rom on your note?
Click to expand...
Click to collapse
Because I have CheckROM and I use the XDA app on my Note and when I open the XDA app I see the V6 topic and I forget that the SII have a CheckROM too and I download it and install. My bad :x
Phone will not go on after changed rom!
I was trying to get a new rom on my Samsung Galaxy Note Gt-N7000, but when the phone was supost to turn on it wodnt.
Now i only get my phone in dowload mode for odin.
Is it possible to fix my phone only with that mode, recover my phone or get me a, another rom like ice chream sandwich?
Plz help me, have no phone at the moment!
And sorry for bad english, im not so good at it:S to write you know :=)
Congrats!!!!!
in having the same issue
samebob said:
I was trying to get a new rom on my Samsung Galaxy Note Gt-N7000, but when the phone was supost to turn on it wodnt.
Now i only get my phone in dowload mode for odin.
Is it possible to fix my phone only with that mode, recover my phone or get me a, another rom like ice chream sandwich?
Plz help me, have no phone at the moment!
And sorry for bad english, im not so good at it:S to write you know :=)
Click to expand...
Click to collapse
I did mine in doin and also i cannot wipe back to factory default and every time I try it shuts down. To get it working again i have to flash odin and there is no recovery. If any one can help us please thank you.
Samsung note 1 data recover from bootloop issue
pauloallex24 said:
Hi. I found a flashable speedmod on his original website and flash it. Now I'm in recovery flashing my old ROM. I will say the final result soon.
EDIT: Work Im in mu old ROM ^^
Thank everyone that help me
Click to expand...
Click to collapse
Hi
I am having samsung note 1 and it went to bootloop stage after updating some firmware. Is it possible to recover the data without loss. I didnt take any backup. Please help on this.. thanks
what rom are you on? If ics then flash a safe kernel using odin and boot into recovery mode CWM and do a nandroid backup. this will secure all your apps and data.. then do a data factory reset and get the phone working
pauloallex24 said:
Hi. I found a flashable speedmod on his original website and flash it. Now I'm in recovery flashing my old ROM. I will say the final result soon.
EDIT: Work Im in mu old ROM ^^
Thank everyone that help me
Click to expand...
Click to collapse
Yo, any change you can share that flashable speedmod?
Because I'm having the same issue, although I followed the steps on ODIN. It just doesnt want to finalize the process.
The progress bar stopped moving after 95%-ish.
Please help,
Thank you:good:
rendyNZ said:
Yo, any change you can share that flashable speedmod?
Because I'm having the same issue, although I followed the steps on ODIN. It just doesnt want to finalize the process.
The progress bar stopped moving after 95%-ish.
Please help,
Thank you:good:
Click to expand...
Click to collapse
Are you really sure you have the identical situation here? Did you really flash a S2-Rom on your Galaxy Note?
If not open a new thread in Q&A and describe exactly what you did and what error messages you get in Odin.

[Q] I've bricked my phone- HELP! :C

okay so I thought bricking android would be complicated but as it turns out it's quite simple.
Please cut me some slack because I am a n00b at all this. I am already googling for a solution and looking on forums but I haven't found anything YET so after a desperate hour of googling I thought of posting here (I will keep on trying to find a solution though).
Here is what I did:
A long while ago I rooted my Galaxy S. Rom was ClockworkMod (recovery says ClockworkMod Recovery v3.0.0.5) and the kernel was Talon. No problem with this.
Now I wanted to do a factory reset so I dialed that number yo need for a factory reset. I got a red text message warning me NOT to touch any button and it would reboot. The phone rebooted and I think I got into the recovery mode.
The icon was a top cat in an orange circle with an arrow. I guess that's part of the Talon kernel.
Anyways on recovery mode screen I saw an option called "wipe/factory reset" I've selected it - I was told it can't be undone- I've said OK- It said everything went fine so I selected reboot.
Now the phone won't reboot. It is stuck in a loop. It will always try to reboot.
So all I see is a GALAXY S i9000 screen followed by a Talos screen with a loading bar followed by the GALAXY S i9000 screen again and it will just loop.
No idea what to do :C
help, please! thanks a million everyone!
Try flash the talon kernel again or if u got a rom on your SD card flash that.
If this doesn't work.search for ezbase 3.0 and follow instructions on how to flash a rom with ODIN.
U can also find ezbase on "insanity rom" thread in the op(1 of the links)
And now your phone is recovered
zodiaxe66 said:
Try flash the talon kernel again or if u got a rom on your SD card flash that.
If this doesn't work.search for ezbase 3.0 and follow instructions on how to flash a rom with ODIN.
U can also find ezbase on "insanity rom" thread in the op(1 of the links)
And now your phone is recovered
Click to expand...
Click to collapse
well I've tried to put an update.zip on the internal storage of the phone because I don't have an external SD card.
I mounted the phone as mass storage device in the recovery mode but my win xp 32 bit would say it is a Samsung Galaxy S but there was an error with the new hard ware and it couldn't be mounted fff
so no idea what to do now?
This is normal, you delated youre whole System. First of all dont panik you able to enter ist downloadmode ? If so, than you'll bei able to install a new rom and you will be able to boot I'm also New here had the same problem with my phone. This is called a soft-brick. I was able to go in DM and flash a new rom with my galaxy s plus
Sent from my GT-I9001 using XDA
Diablob555 said:
This is normal, you delated youre whole System. First of all dont panik you able to enter ist downloadmode ? If so, than you'll bei able to install a new rom and you will be able to boot I'm also New here had the same problem with my phone. This is called a soft-brick. I was able to go in DM and flash a new rom with my galaxy s plus
Sent from my GT-I9001 using XDA
Click to expand...
Click to collapse
vielen lieben dank
yeh i guess i did a soft brick. So what exactly do I do now?
I have managed to copy an update.zip file I've found on my computer to the phone but the download mode gives me an error and says it can't install it.
Can you link me to the files I need to install on it with the help of the download mode? Thanks a lot
so I have already tried installing different roms which seemed to have worked fine
I have tried just any random rom (Simplicity) I could find on this forum. It installed but I am still stuck in a boot loop. I don't see the Talon graphic anymore but the Galaxy S animation but I am still stuck in a loop.
help :C
zodiaxe66 said:
If this doesn't work.search for ezbase 3.0 and follow instructions on how to flash a rom with ODIN.
U can also find ezbase on "insanity rom" thread in the op(1 of the links)
And now your phone is recovered
Click to expand...
Click to collapse
http://www.theandroidsoul.com/ezbase-rom-v3-0-full-installation-guide-w-video/
is what ive found when googling. of course ALL THE FILES are offline again. what a surprise.
really a shame. this looked so promising :C
i've flashed a different ROM in the mean time but it doesn't let me flash anything else anymore. that recovery mode is awful so i can only suggest no one uses simplicity rom
You need to flash a new firmware using odin, partition with 512 pit. Check this link for instructions and firmware. http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my GT-I9000 using xda premium

Help ! Installation of flash cyanogenmod failed

i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Which phone do you have? Can you go into recovery/download mode?
my phone is samsung galaxy s plus and yes i CAN go into recovery mode
Donovan662 said:
Which phone do you have? Can you go into recovery/download mode?
Click to expand...
Click to collapse
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Habescha said:
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Click to expand...
Click to collapse
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
thx i will try it but can you tell me where i went wrong? is it because i didnt delete kies on my windowspc? or anything special bec i would like to have ics on my phone...do you recommend cm9 instead of 10 because it didnt worked on my sgsplus or do you recommend me to try again...carefully of course ?
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
how can i find out my right firmware for my phone? or is it not important which i download?
Habescha said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Click to expand...
Click to collapse
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
thx though zou helped me a lot...now cm9 is working fine on my sgs plus...does cm10 works too im wondering bec i tried and it stocked after rebooting it
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
no i did all the steps wiping and deleting the data im pretty sure...cm9 is as i already said working fine....do you recommend to try to flash cm10 again on my phone bec im afraid to brick my phone...used the one of the xdaforum 2012-11-22: CM10 alpha4
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
educk said:
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Habescha said:
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Click to expand...
Click to collapse
I'm glad you managed to make it work.
educk said:
I'm glad you managed to make it work.
Click to expand...
Click to collapse
THX but ONE QUESTION?! does cm10 alpha 5 works without any problems? i mean can you go into youre mobile internet when youre outside? bec my phone with alpha 5 cm10 by ivendor does not work....:s i decided to flash the older alpha 4 until i found out the reason why it doesnt function...any guesses? =)
OK FOUND THE FIX ZIP ALREADY O XDA DDDDDD
ONE LAST THING : the vibration of the back and menu button is for me to hard....i found out that on my sgs plzs cm10 alpha 5 in settings-advanced there is NO VIBRATION setting in there, on my friends one there were several more options to choose!
is it maybe bec i flashed my phone with an older cwmrecovery?i think its 5.0 blabla...do i have to flash it again with the newer once 6.blabla?
thank you GUYS for youre quick help
help.....my xperia miro stuck at black screen after sony logo came out
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
AndrewLian said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Do you have a Sony? Post then better in the threads for your phone.
This is section for Samsung Galaxy S
tetakpatalked from N7100
cm 10.2.1.3 installation failed
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
chinarredij said:
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
Click to expand...
Click to collapse
You have posted in wrong thread here.
tetakpatalked from 1+One

Galaxy S GT-I9000 not starting after using Oding to root

Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
http://theunlockr.com/2012/10/22/how-to-root-the-samsung-galaxy-s-i9000-cf-kernel-method/
Click to expand...
Click to collapse
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Hello!
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Don't worry, it is just a digestion problem (bootloop). CF-root doesn't work with every firmware. If yours wasn't compatible, bootloop is normal reaction. Check my last thread and there you can find step-by-by step guide how to unbrick it.
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Here you go!!!
Don't worry. It is just a little thing.
Read my post here in the below given link. The solution is given in easiest steps.
forum.xda-developers.com/showthread.php?p=47034690#post47034690
Thank you so much guys it's working now, (even though I put the original one)!
I'll try to root it again asap!
tetakpatak said:
If yours wasn't compatible, bootloop is normal reaction.
Click to expand...
Click to collapse
How do I know if it's compatible or not? What should I check?
_Flasher_ said:
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
Click to expand...
Click to collapse
Sorry for the late reply: anyway no, the only thing I could do was watch the phone reboot and reboot and reboot and reboot and, finally, reboot
Thank you again!
BeNdErR said:
Thank you so much guys it's working now.
How do I know if it's compatible or not? What should I check?
Click to expand...
Click to collapse
Great, mate- I'm glad it works again
CF-Root is made AMAIK for Gingerbread ROMs only, and if you have Froyo it is enough to flash SpeedMod root kernel that already features CWM recovery, Busybox and SU. You should always ready very carefully the first posts of the files you flash, so you will void many potential problems.
If you did it after my unbrick guide thread, backup your IMEI No as soon as you root your phone (described how to)
Just click "thanks" button beyond posts which were useful for you, it is our way to express it on this forum (and many us here are visiting the forum to help each other)
GT-I9000 blackout, can only go to download mode after Odin
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
jaysonuao said:
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
Click to expand...
Click to collapse
Which Odin version did you use and what exacactly did you try to flash? Which system / Android version is installed om the phone?
tetakpatalked from N7100

[Q] can't access recovery after CWM 4.0.0.9 flash - Galaxy Ace GT-S5830 -please help!

Hi everyone,
I'm new so please be gentle with me -
Have just rooted my Galaxy GT-S5830
Running Gingerbread 2.3.4,
Baseband S5830BVKQB,
Kernel version [email protected]#1,
Build number GINGERBREAD.BVKQ9
using the file for the GT-S5830 from here: ( http://dengadgets.blogspot.co.uk/201...smarphone.html - root_S5830.zip) successfully, copying it to the root folder of the SD card and flashing it from recovery.
I Then tried to flash CWM 4.0.0.9 using the same method (which I got from http://forum.xda-developers.com/show....php?t=1168417 )
Now when I try and reboot in recovery it crashes at the Galaxy Ace screen, otherwise boots fine, and download mode still accessible - not sure why and am unsure about what to do about it. From reading a fair few Q+A posts I think I might need to flash the phone with stock rom using odin, but:
If I do will that wipe my data? (I have data on the phone that I really don't want to lose, particularly on memo - also can't backup on kies as support say the phone is too old and doesn't have that function available - backing it up is one of the main reasons why i'm going through this in the first place...)
Is there another way if it would wipe the data?
How do I avoid getting back in the same mess when flashing CWM?
If I do flash a stock rom / firmware with odin, does it have to be the one that was on there originally [France (Orange)] or can I use the latest UK one (with Gingerbread 2.3.5)?
I really apologise if this has been answered many times - i can't find it but would be grateful to anyone that can help / point me in the right direction
ChildoftheBeat said:
Hi everyone,
I'm new so please be gentle with me -
Have just rooted my Galaxy GT-S5830
Running Gingerbread 2.3.4,
Baseband S5830BVKQB,
Kernel version [email protected]#1,
Build number GINGERBREAD.BVKQ9
using the file for the GT-S5830 from here: ( http://dengadgets.blogspot.co.uk/201...smarphone.html - root_S5830.zip) successfully, copying it to the root folder of the SD card and flashing it from recovery.
I Then tried to flash CWM 4.0.0.9 using the same method (which I got from http://forum.xda-developers.com/show....php?t=1168417 )
Now when I try and reboot in recovery it crashes at the Galaxy Ace screen, otherwise boots fine, and download mode still accessible - not sure why and am unsure about what to do about it. From reading a fair few Q+A posts I think I might need to flash the phone with stock rom using odin, but:
If I do will that wipe my data? (I have data on the phone that I really don't want to lose, particularly on memo - also can't backup on kies as support say the phone is too old and doesn't have that function available - backing it up is one of the main reasons why i'm going through this in the first place...)
Is there another way if it would wipe the data?
How do I avoid getting back in the same mess when flashing CWM?
If I do flash a stock rom / firmware with odin, does it have to be the one that was on there originally [France (Orange)] or can I use the latest UK one (with Gingerbread 2.3.5)?
I really apologise if this has been answered many times - i can't find it but would be grateful to anyone that can help / point me in the right direction
Click to expand...
Click to collapse
Well Download Flashify and Download The Compatible CWM for SGA or Cooper.
It must be the .img file
open the app n choose .img file hit Flash and Reboot.
U Have Probably Crashed your Recovery or flashed incompatible version
Hit THANKS BUTTON
Thank you!
will be busy this week but will try it as soon as I get a chance and will let you know how it goes
ChildoftheBeat said:
Thank you!
will be busy this week but will try it as soon as I get a chance and will let you know how it goes
Click to expand...
Click to collapse
hmm. if u face any problem let me know..i will help u bro

Categories

Resources