[Q] Samsung GT-I9305T flashing help - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Hey everyone I'm in need of assistance of flashing the above phone(not mine). I can't turn the phone on due to an update that I can assume corrupted the ROM or something of the sort. I can get into DL mode but this is what I get when turning the phone on normally- imgur.com/Jrk8nKT
I have found a stock telstra ROM for the phone but as soon as I try to flash it with Odin it says "there is no pit partition" but I am lost as to where to find a pit file.
If anyone could help or has any ideas I would be extremely grateful.
Thanks!

NightlyBuzz said:
Hey everyone I'm in need of assistance of flashing the above phone(not mine). I can't turn the phone on due to an update that I can assume corrupted the ROM or something of the sort. I can get into DL mode but this is what I get when turning the phone on normally- imgur.com/Jrk8nKT
I have found a stock telstra ROM for the phone but as soon as I try to flash it with Odin it says "there is no pit partition" but I am lost as to where to find a pit file.
If anyone could help or has any ideas I would be extremely grateful.
Thanks!
Click to expand...
Click to collapse
I've already saw many people saying to dont do nothing with pit and repartition unless its your last resource. I dont have much knowledge about it, so i would recomme d you flash a 4.1.2 rom via odin and then enter recovery mode (vol up + home button + power button) and wipe data, maybe you succed.
One question, u said you can enter in download mode, but can you actually flash something via odin? I reccomend you try to flash the galaxy project with android 4.1.2 and see what odin says. I had a problem once and odin didnt flash anything unless this rom i mentioned, but via cwm. After that i reinstalled the pc drivers and installed triangle away from chainfire, reset the counter with that and tried flash a stock rom via odin again and this time it worked

Related

[Q] How to intentionally semi-brick your phone by flashing JM1 firmware that fails

I flashed several firmwares already, including JM8 and Doc's - which was working perfectly and now this happens to me. Imagine the double facepalm I had when this occurred.
Why I went to flash JM1 ? Because it was originally on my phone when I bought it and I went to flash it and let Kies flash official Froyo because I still haven't seen official Froyo on my phone
So, just from curiosity.
So, steps for semi-bricking your phone:
1. Download official JM1. With it I also downloaded XFJM3 CSC because it is specific to my country and newer than JM1, but you can also use the JM1 CSC.
2. Use Odin and .512 pit file, repartition just with it, then later flash the PDA and MODEM.
3. Everything will work fine, Odin will say Passed, device will restart, pass first logo, pass second...and then the screen will go black and that's it, you're stuck. Notification lights still work though, when you touch them so it's kinda sweet and comforting to know that.
So what's the problem, just re-flash again or try with another ROM? Yeah, great idea that won't work and this is the best part: JM1 is the firmware which didn't have the 3-button combo, which means, if you flash it you lose the 3 buttons combo. It's the only part of the flashing process that actually worked, obviously and unfortunately.
Great job. I just flashed JM1 that won't boot and lost 3-button combo. I'm still thinking of heating it with hair dryer or maybe just putting it on 250°C in the f..... oven and getting over with this.
What do you think?
Oven or dryer ?
OK, I'm pissed. Sorry. Need help. Thanks.
JM1 won't change the bootloader via ODIN. It didn't loose your 3br.
You only need to delete data/cache for your phone to boot, but you don't have that option.
Rather than using a hair dryer, or putting it in the oven, why not just make your own USB JIG cable?
Oh, and why's this in the dev forum?
Yeah, sorry, I put it in wrong forum. Must be because I lost my nerves. I'd appreciate if moderator could move it to wherever...
So what's that JIG cable, how does it work, never heard of it before? Sorry. Will Google anyway
EDIT: found it, will give it a try. Thanks
EDIT2: should I give it a try? Some have bricked it completely with that cable...
Problem solved by using this method: http://forum.xda-developers.com/showthread.php?t=819551
Also thanks to Rawat for mentioning the jig method, of which I've never heard before.
Rawat said:
JM1 won't change the bootloader via ODIN. It didn't loose your 3br.
You only need to delete data/cache for your phone to boot, but you don't have that option.
Click to expand...
Click to collapse
Can someone please tell me how do I delete data/cache, because I flashed the JM8 firmware but still 3-buttons don't work. Tried to reflash the bootloader with 3-button fix but that failed as well.
Neo-ST said:
Can someone please tell me how do I delete data/cache, because I flashed the JM8 firmware but still 3-buttons don't work. Tried to reflash the bootloader with 3-button fix but that failed as well.
Click to expand...
Click to collapse
Deleting cache won't make any difference.
XXJM1 firmware is a low level package(contains sbl.bin and pbl.bin with disabled combo), flashing it through odin will make lose the phone hability to enter to download and recovery mode throught odin.
Solution:
With a JIG enter in download mode and flash Richthofen Aries P-SBL file.
Success, thanks.
I flashed XFJP7 Froyo and after it, flashed the bootloader, now it works, however it's 3e recovery, not 2e, is that ok ?
vinclar said:
Deleting cache won't make any difference.
XXJM1 firmware is a low level package(contains sbl.bin and pbl.bin with disabled combo), flashing it through odin will make lose the phone hability to enter to download and recovery mode throught odin.
Solution:
With a JIG enter in download mode and flash Richthofen Aries P-SBL file.
Click to expand...
Click to collapse
Ah, I thought he flashed XWJM1.
Neo-ST said:
Success, thanks.
I flashed XFJP7 Froyo and after it, flashed the bootloader, now it works, however it's 3e recovery, not 2e, is that ok ?
Click to expand...
Click to collapse
Yes. Froyo ROMs have recovery 3e. If you want 2e, check chainfire's CF-Root topic on the dev board.

[Q] Firmware flash with Odin problem GT-i9000M

Today, my phone became laggy and I restarted my phone, however it didn't boot past the samsung galaxy s i900m screen. It never reaches the animation screen.
This happened before and after hours of trying different methods i sent it in to get fixed but now it has happened again and i want to see if i can fix it myself.
I have tried to flash it with I9000UGKC1 without any PIT file and repartition unticked and odin had completed it successfully but the phone just cycles back into the boot screen.
Ive tried flashing it again with the same firmware and a 512 PIT file with repartition ticked and unticked but its always the same result.
Is there anything I am doing wrong or are there any other suggestions?
p.s I have rooted the phone and applied a lagfix.
Thanks in advance.
Rule one before flashing UNDO LAGFIX lagfix F**** your install .
jje
Hi dude,
Try flashing with the ODIN included.
Hopefully, it will fix your problem
P.S. if nothing works try flashing Darky's resurrection edition
http://forum.xda-developers.com/showthread.php?t=940671&highlight=[ODIN+ROM]
Good luck!
Thanks for the replies guys.
jje, i would disable it now but since it's bricked i dont think i can. Also i cant get into recovery mode. Im only getting into download mode because i bought myself a jig the last time this happened.
Nitro, i dont know what you mean by "ODIN included" ive been using odin to flash it.
What is Darky's by the way? Is it a custom ROM?
darkys is a custom rom... and Im pretty sure he meant he had attached odin for you.
Maybe try flashing JL2 with 512 and part checked..? does odin flash without an issue? and do you get any errors when trying to enter recovery?
Oh okay... well i was using odin 1.7 anyway
odin flashes without an issue and i cant get into recover because my phone is one of the unfortunate ones without 3BR.
I'll try flash it again as you said but if it doesnt work ill just go ahead and send it in to get fixed.
there are phones with no 3BR? I thought it was only 3 button download??? So odin flashed without any issues and you still cannot boot?
What firmware are you flashing?
Try JL2/KC1 maybe try a gb like JVO
usually the phones can't get into either.
i had to buy a jig to get into download mode.
ive tried KC1, JL2 and some others for android 2.1 and the same keeps happening. Odin flashes fine but the phone never boots
I'm just going to send it in to get fixed. I was just seeing if it was me doing something wrong or its just the phone and well it seems like its the phone.
Thanks for your help
if you can hit download mode you should be able to flash it, does adb work for you to get into recovery i think it's something like
adb reboot recovery.....not sure on that though, anyways, try flashing a new kernel, go to the dev section and flash hardcore speedmod then flash the rom again, at this point I dont think it matters so I would try using a 512 pit and tick repartition......just me though, i'd be trying everything before I sent it away

[Q] Galaxy Note bricked when used "u1_02_20110310_emmc_EXT4.pit" in Odin

Okay. Some history to start with...
I got Chinese version of Galaxy Note which runs i9220 ROM and been trying to flash with HK/EU ROM last several days but out of luck so far. (And whenever failed, I re-loaded stock ROM found from Samsung-updates.com site for i9220. It then worked fine but still with original problem unsolved.
I then tried one last method that I saw someone succeed flashing Chinese ROM via use of PIT file came from one of the other downloads.. yeah, I didn't check the source PIT came from before try... which is my bad.
Without confirming it, I instantly located "u1_02_20110310_emmc_EXT4.pit" that's packaged with odin 1.85 and carelessly gave a try.
And now... my precious GalaxyNote became the most expense brick in my house and am looking for professional help from you guys.
Steps I did before bricking and tried:
1. Load GalaxyNote in Download mode (volume down + home + power)
2. Launch Odin 1.85 and no change to default setting. (Check mark on #Auto Reboot & #F.Reset Time, uncheck on #Re-Partition & #Flash Lock)
3. Set PIT to "u1_02_20110310_emmc_EXT4.pit"
4. Set PDA to "N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME"
5. Click #Start
Soon after around 5%, it failed.
I then attempted to restore factory ROM via usual way - doing same as above except no PIT this time and choosing original stock ROM for i9220.
It failed! OMG...
I then tried again (#1 ~ 5 above) but this time, check on #Re-partition for luck. Still no luck!
I then downloaded Heimdall1.3.1 and tried to extract PIT file but the tool fails as well and gives "ERROR: Failed to access device. libusb error: -12".
At all times, GalaxyNote screen shows android icon with 'Downloading... Do not turn off target!!'. And the device can also be seen from odin.
Soon as turn off galaxynote and disconnect from computer, it shows 'Software Update Fail' message.
How I can restore to original factory setting? And if possible, how I can restore to EU or Hong Kong ROM?
My Chinese friend has the same device as mine. In this case, will Heimdall tool help extracting PLT from it and help restoring my device via odin?
Your professional help is sincerely appreciated!!!!
Resolved
Using "Q1_20110914_16GB.pit" and re-partition check from odin while flashing to original stock rom has resolved an issue.
Referred from following thread.
http://forum.xda-developers.com/showthread.php?t=1533214
Never use pit and do not tick repartion when flashing.
bootloader?
U are fine. It is a recovery issue and not a bootloader. Install custom recovery and flash stock firmware w odin. Oh yea, and profit.
Toolmighty said:
U are fine. It is a recovery issue and not a bootloader. Install custom recovery and flash stock firmware w odin. Oh yea, and profit.
Click to expand...
Click to collapse
Why do you revive an old thread? The user has resolved it the day after his problem.

Bricked Galaxy TAB 8.9 (GT-7300) - $20 reward for working solution

Hi,
So, I got a Samsung Galaxy TAB 8.9 (GT-7300) WiFi+3G. Nordic/European version. I have a long history of rooting and running custom ROM's on my Android devices, but this time i f##ed up a bit.
1. Installed root_original.zip from this thread by copying it on to the tablet and applying it from stock recovery.
2. Booted and installed Superuser and ROM Manager from Market.
3. Used ROM Manager to install CWM for Galaxy Tab 10.1 (Yes, I know...).
4. Tab would not boot, but I could still get in to download mode. Browsed some XDA threads and came across this guy who seemed to have the same problem. I did not see that he had a P7310 (WiFi only) tablet. So, I used Odin 1.85 to install the bootloader, which was for the P7310, not for P-7300. Now, the tablet boots but the display is just flickering, like it is using a wrong refresh rate or wrong resolution. Not at all possible to read anything, but I can still get into Download mode.
5. Installed stock rom from here, specifically this one: P7300XWLA2------2012 January----P7300NEELA1-----Nordic countries----
Still no luck. The tablet boots into Android but the display is still flickering.
$20 for anyone who gets me out of this mess
Can you come in recovery ?
Than try this?
http://forum.xda-developers.com/showthread.php?t=1519564
There is an option in CWM under the mount and storage tab where stands mount usb connection click on that and move this to your tab after that install it
I hope it will work!
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Oh and btw, my advice is for free.
Hi safariking,
I can get in to recovery, but I'm unable to read anything, as the display is just flickering. I would need a press-by-press guide in order to perform the steps correctly... :/
Thanks kallt_kaffe, I'll try the swedish firmware and follow the guide step-by-step
kallt_kaffe said:
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Click to expand...
Click to collapse
Installs correctly but does not fix my display problem.
kallt_kaffe said:
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
Click to expand...
Click to collapse
I followed the guide step-by-step. No errors occured during flashing.
kallt_kaffe said:
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Click to expand...
Click to collapse
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
kallt_kaffe said:
Oh and btw, my advice is for free.
Click to expand...
Click to collapse
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
snubbel said:
Installs correctly but does not fix my display problem.
I followed the guide step-by-step. No errors occured during flashing.
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
Wooow that looks not good man i think you must return it back to samsung
you can run a logcat maybe
snubbel said:
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
If you turn it off and charge it, is the charging-mode-display also distorted?
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to General
kallt_kaffe said:
If you turn it off and charge it, is the charging-mode-display also distorted?
Click to expand...
Click to collapse
If I turn it off it automatically turns back on and boots Android. So I can't see if the "charging while turned off" icon is also distorted.
kallt_kaffe said:
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Click to expand...
Click to collapse
I left it in download mode last night, it's still turned on. I'll let the battery drain and see what happens when I connect the charger.
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
snubbel said:
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
Click to expand...
Click to collapse
I honestly do not know.
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
nirogu325 said:
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
Click to expand...
Click to collapse
Re-partitioning with the PIT file along with the ROM did not help :/
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
snubbel said:
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
Click to expand...
Click to collapse
As long as you have the right drivers installed, no. That's my setup.
I had a similar issue. It occured only when I turned display off and on, both in android and in battery charging mode while powered off. I just went back to the store and got it replaced. xD
Anyway the flickering began to show up after flashing 3.2 back from a 4.0 rom... So I think there was something wrong with the bootloader.. Didnt find any tar file containing the original bootloader.. Perhaps someone here can make it for you
hey,
i got same problem after i tried to install cm9. now i cant install nothing (i formated cash, data, system and preload) no data factory reset working. i have nonstop bootloops and format cache and dalvik not working but cwm ist starting but not working really. but can start download mode too ... so i think its not a super-brick for my gt 7300 from switzerland.
so, i will try to download from samMobile the original firmware and to flash with odin. anybody knows a tutorial with odin for gt 7300? cant find nothing for pit, csc, tar ...
please help me
thx sophie from switzerland
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
I have to say, I was about to send the tablet to samsung, it was dead, no rom, no boot, no partition, no USB connection to store, what save me was the Odin up load that you recommended me, the tablet was really crashed.
I Think that is a sollution for actually almost any problem on the tablet (a complete format, sure, but still a good solution for ROM problems).
anyway, Many Thanks!!!!!!
Newbie try to help.
Have you try to install another CMW version using odin? Maybe it's caused by wrong CMW version. Try CMW v5.5.0.4 here http://forum.xda-developers.com/showthread.php?t=1312218

Problem my phone is stuck on download mode.

I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.
Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .
ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download
Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.
grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.
@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.

Categories

Resources