I'm not too worried about undoing the rooting (unless there's an easy way) but how to I get back to Android 2.1 like I had when I first got the phone? Can I just install the stock ROM and where do I find it?
Thanks
kbeeveer46 said:
I'm not too worried about undoing the rooting (unless there's an easy way) but how to I get back to Android 2.1 like I had when I first got the phone?
Thanks
Click to expand...
Click to collapse
Why would you want an unlocked bootloader with the OTA stock ROM? There is no way to relock the bootloader and regain your warranty.
CM is Android 2.1, just a better, faster version.
If you are concerned about OTA updates, the features are generally included in Cyanogen's ROM immediately upon release, but usually far before any OTA release.
No big reason why I want to right now but I like knowing there's a way to get back to stock in case something goes horribly wrong and I mess something up (and for the same reasons some of us reformat our computers often). I don't even notice a huge difference (speed and battery) running CM. I haven't installed many apps or themes though.
kbeeveer46 said:
No big reason why I want to right now but I like knowing there's a way to get back to stock in case something goes horribly wrong and I mess something up (and for the same reasons some of us reformat our computers often). I don't even notice a huge difference (speed and battery) running CM. I haven't installed many apps or themes though.
Click to expand...
Click to collapse
you cant go back to stock...you will never have a locked bootloader again...yet
xsnipuhx said:
you cant go back to stock...you will never have a locked bootloader again...yet
Click to expand...
Click to collapse
That's different than the stock rom, right? Is it possible to be unlocked and run the default rom that comes with the phone? Or is that combination not a possibility?
Sure you can do that, but I guess I just don't understand why...
You can always go back to stock everything except your bootloader will remain unlocked (unless someone finds a workaround or hack)
Anything you can screw up (except a bad radio flash) can be fixed by having an up to date Nandroid backup...
Just do what I do and make sure to Nandroid every other day or so. (Or before every time you change anything in the system/framework/boot/kernel etc.)
forum.xda-developers.com/showthread.php?t=619801
i think you can get the stock rom from here if you didnt do a nandroid backup
If i were going to sell the nexus one some time in the future, it would be good to know where the stock rom can be found. Some people don't want to be flashing ROMs all the time, and would prefer OTA updates. Once the phone is over a year old, the unlocked bootloader will be meaningless.
Simple, in the android development section at the top of the list as a sticky, [ROM] 22/Mar ERD79 -> EPE76 - Stock Nexus One images / zip / online kitchen / rooted, or heres the link, http://forum.xda-developers.com/showthread.php?t=619801, it gives you the stock rom. happy flashing
ernvillanueva90 said:
Simple, in the android development section at the top of the list as a sticky, [ROM] 22/Mar ERD79 -> EPE76 - Stock Nexus One images / zip / online kitchen / rooted, or heres the link, http://forum.xda-developers.com/showthread.php?t=619801, it gives you the stock rom. happy flashing
Click to expand...
Click to collapse
The download links in that thread don't seem to work any longer. It just redirects me to the homepage. I probably need an account or something. Blarg.
EDIT: Still don't work even with an account.
kbeeveer46 said:
The download links in that thread don't seem to work any longer. It just redirects me to the homepage. I probably need an account or something. Blarg.
EDIT: Still don't work even with an account.
Click to expand...
Click to collapse
That site uses an anti bandwidth stealing feature, just right click the link and save as.
Hi all, in a couple of days time I will be receiving my first ever Android device, the Motorola Milestone. I've already done some research on the phone as well as on Android itself, and understood most of the necessary basics. However, there are still many things I don't understand quite yet, and would like some help with clarifying them.
My first question is regarding the custom roms. I myself have been a long time user of Windows Mobile so I know most of the stuff that is relevant to Android as well. From what I know, the bootloader on the Milestone is still locked, but people have found ways to load custom roms on it. Can someone link me to the guide on how to do this? Now before someone tell me to search on the forum or on Google (which I already have), I just want to point out that the ones I found seemed to be outdated, and that they're for older Android versions??
My 2nd question is, do custom roms like IceandFire or Froyomod come with their own custom kernels? Because I want to be able to overclock my phone, and if it comes installed with its own kernel then I don't want to risk bricking it by flashing another kernel on top of it......I hope that makes sense??
3rd question is, which rom is the best for speed and battery? I'm guessing it's IceandFire and it builds upon the latest CM7?
And lastly, are there any crucial apps that you guys recommend I should install, or any tweaks etc I should use?
chaoscreater said:
Hi all, in a couple of days time I will be receiving my first ever Android device, the Motorola Milestone. I've already done some research on the phone as well as on Android itself, and understood most of the necessary basics. However, there are still many things I don't understand quite yet, and would like some help with clarifying them.
My first question is regarding the custom roms. I myself have been a long time user of Windows Mobile so I know most of the stuff that is relevant to Android as well. From what I know, the bootloader on the Milestone is still locked, but people have found ways to load custom roms on it. Can someone link me to the guide on how to do this? Now before someone tell me to search on the forum or on Google (which I already have), I just want to point out that the ones I found seemed to be outdated, and that they're for older Android versions??
My 2nd question is, do custom roms like IceandFire or Froyomod come with their own custom kernels? Because I want to be able to overclock my phone, and if it comes installed with its own kernel then I don't want to risk bricking it by flashing another kernel on top of it......I hope that makes sense??
3rd question is, which rom is the best for speed and battery? I'm guessing it's IceandFire and it builds upon the latest CM7?
And lastly, are there any crucial apps that you guys recommend I should install, or any tweaks etc I should use?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=983516
This is still the best way to get a custom ROM loaded up onto your phone. What you want to start with is flashing the vulnerable recovery from http://android.doshaska.net/rootable by using RSD Lite. To do so, you need to put the phone into Bootloader mode (power+Dpad-up) You can google RSD Lite, make sure you use the latest version along with the latest USB Driver version from Motorola.
RSD Lite is a very finicky program, if you have any errors flashing, your best bet would be to try this post: http://androidforums.com/droid-all-...hing-process-0x7100-rsd-lite.html#post1274587
Once you flash the VR (vulnerable recovery), you will want to put OpenRecovery on your SD Card. I recommend using OR 1.46 and placing FuFu's minimod on the SD Card as well. It will overwrite existing files in OR (look for it in Milestone Development). From here you can root the phone in OR (by using power+x, then camera+volume up) and reboot, backup all data you want saved, before flashing a ROM.
Once that is done, get the custom ROM that you want (I find speed + battery can be Cronos, CM7 or FroyoMOD for a Froyo ROM) and place it in OpenRecovery/updates. You will also want the most up-to-date version of Google Apps for Cronos or any Gingerbread ROM (except MIUI).
Gapps: http://goo-inside.me/gapps/gapps-gb-20110613-signed.zip
Now, turn the phone off, and put it into recovery mode (power+x, then camera+volume up), select apply update.zip and you are now into OpenRecovery.
Here is where you will flash your custom ROM and Gapps. Wipe both cache partition and dalvik cache, then wipe all data. Select Apply Update under Miscellaneous Menu and select the ROM you want. Once it is done, wipe both caches (not data) and flash Gapps. Wipe caches again. Finally, change the baseband to your country and reboot.
The first reboot will take a while, as the ROM is configuring itself for first time use.
That is how to flash a custom ROM and get started.
2- Custom kernels are not available for Milestone, as our bootloader is locked. Overclocking the phone is done through the 10overclock file in system/etc/init.d . All ROMs that I know of are overclock, most to 1GHz (from 550MHz). You will not be able to flash any kernels, and DO NOT try ROM Manager, it will temporarily brick your phone.
Crucial apps, I would say are Root Explorer, TitaniumBackup. Those are the two that are very useful for root users, if you flash multiple ROMs or need to access system files.
Hope this helped.
awesome, thanks for the reply mate!
Hmm 2 things i'm confused with. Isn't there an app called "Milestone Overclock" that lets u overclock without installing custom kernels?
Also, from what I know you need to have the bootloader unlocked in order to install custom roms. I already know that Motorola is still keeping the bootloader locked and that as of now, there isn't a way to unlock it. Then how come we can install custom roms?
Also, since you mentioned ROM Manager, I did a quick search and it seems to be able to manage multiple custom rom installs that you have. But then you said don't try it or it will brick the phone, so I don't understand whether I can install it or not?? Personally, I love testing out different roms as well as new builds. It would be nice to dual boot or choose between different roms to use. But i'm not sure whether I want to go forward with this since your comment implies to me that I shouldn't install Rom Manager?
Lastly, this is the part I found most confusing with Android (or with Windows Mobile as well). I found some guides that tells you to install Clockwork Recovery Mod or something like that. Some of them even mentioned using Nandroid or something. There seems to be different methods & tools/softwares for different devices (or even the same device) and it can be confusing to keep up with them. My question is, are there major differences between them? Which one is better and should I keep them up to date?
chaoscreater said:
awesome, thanks for the reply mate!
Hmm 2 things i'm confused with. Isn't there an app called "Milestone Overclock" that lets u overclock without installing custom kernels?
Also, from what I know you need to have the bootloader unlocked in order to install custom roms. I already know that Motorola is still keeping the bootloader locked and that as of now, there isn't a way to unlock it. Then how come we can install custom roms?
Also, since you mentioned ROM Manager, I did a quick search and it seems to be able to manage multiple custom rom installs that you have. But then you said don't try it or it will brick the phone, so I don't understand whether I can install it or not?? Personally, I love testing out different roms as well as new builds. It would be nice to dual boot or choose between different roms to use. But i'm not sure whether I want to go forward with this since your comment implies to me that I shouldn't install Rom Manager?
Lastly, this is the part I found most confusing with Android (or with Windows Mobile as well). I found some guides that tells you to install Clockwork Recovery Mod or something like that. Some of them even mentioned using Nandroid or something. There seems to be different methods & tools/softwares for different devices (or even the same device) and it can be confusing to keep up with them. My question is, are there major differences between them? Which one is better and should I keep them up to date?
Click to expand...
Click to collapse
I have tried Milestone Overclock, but I never really used it to overclock the phone. I prefer changing the voltages and speeds with the 10overclock file. If you read the description of Milestone overclock, it "tricks" the kernel into thinking it's supposed to run at a certain speed.
ROM Manager and Clockwork Recovery Mod do not work on Milestone. The only recovery that works with the Milestone is OpenRecovery or Androidiani OpenRecovery. Unfortunately, the only way to flash the ROMs is through OR or AOR, so you will have to repeat the processes every single time. I have gotten used to where all of the options are for FuFu's Minimod, so I am able to do it quite efficiently
The best way to backup a ROM, system data and the such is by Nandroid backup. That is the only sort of backup that you can do. It is recommended to do one every time you flash a custom ROM, but I only did it after I rooted and before I flashed my first custom ROM. You can do it through OR. That is the only way that will work. CWM and ROM Manager will just temp brick the phone and you will have to reflash a stock SBF all over again.
i see.....in that case there's no way to install 2 different roms to allow dual booting then? What about the app "Boot Manager", will that work? I found it on this site here:
http://www.androidpolice.com/2011/0...ted-user-should-know-about-part-4-apps-26-33/
One last question, I came across this popular app that is recommended by many Android users, called Apps2SD. My understanding to this is that by default, any apps/games that you install on your device will install to the internal memory, and that this Apps2SD app basically lets you install to your memory card? So my question is, does this lag the phone somehow? I like to have many apps and especially games installed on my phone, would doing this affect the performance or something? I know this is the case for Windows Mobile, but not sure about Android.....
chaoscreater said:
i see.....in that case there's no way to install 2 different roms to allow dual booting then? What about the app "Boot Manager", will that work? I found it on this site here:
http://www.androidpolice.com/2011/0...ted-user-should-know-about-part-4-apps-26-33/
One last question, I came across this popular app that is recommended by many Android users, called Apps2SD. My understanding to this is that by default, any apps/games that you install on your device will install to the internal memory, and that this Apps2SD app basically lets you install to your memory card? So my question is, does this lag the phone somehow? I like to have many apps and especially games installed on my phone, would doing this affect the performance or something? I know this is the case for Windows Mobile, but not sure about Android.....
Click to expand...
Click to collapse
I follow AndroidPolice as well. I don't know about Boot Manager, I heard about it, but I haven't heard any reviews of it yet.
Two things when it comes to phone storage and apps on the Milestone: Old hardware makes for a lot of games to not work at all, and low phone storage space.
Almost every ROM comes with apps2ext support, which is a more advanced version of Apps2SD. You can follow this tutorial here: http://forum.xda-developers.com/showpost.php?p=10994672&postcount=226
Apps2ext will trick your phone into thinking space on the SD Card (the ext partition) is actually part of the phone's internal memory. You will be able to get a lot more apps on the phone this way.
Ahh cool, that saves me the trouble of me having to install an extra tweak.
Hmm I know Milestone is old, but not that old is it?? I don't know of any games now days that require heavy hardware specs or anything......i'm just hoping that emulators will work fine on it. I mean, my iPod Touch 3rd Gen only has about 120MB of free RAM, and the CPU is crap as hell and yet I could run GBA games like Pokemon or Golden Sun fine no problem (with sound of course). I'm hoping it'll at least work smoothly on the Milestone since I'll be attempting to overclock it to 1Ghz, which should run it significantly faster in theory.
BTW I found this great tweak for the CM7, here's the link:
http://chromloop.com/2011/07/how-to-make-cyanogenmod-7-for-milestone-a853-lighter-and-faster/
are there any ones similar to this? I'm a tweak junkie addict, I like to make my device run as smooth and as fast as possible. When I still had my HTC Touch Pro and Xperia X1, and even Nokia N900 (which uses Maemo 5), I tweaked the crap out of them and got more juice and power and made its performance so much better. I'm hoping I can at least do the same for the Milestone, except I couldn't seem to find many tweaks...
Oh lastly, I know one of the big problems with Android is fragmentation. There're already some apps out there in the Android market that are exclusive to certain Android versions. The same app has a version for Froyo (v2.2) and Gingerbread (v2.3). This is true for some of the mods or tweaks on XDA. So my question is, are custom roms like CM7 using Gingerbread? I'm guessing yes since it says 2.3.5? In that case, would I be able to simply install the latest mod/tweak or apps/games from XDA or the Android market? Or must I find the versions that is identical to mine?
E.g. if I install CM7, can I still install a mod that is for Froyo?
chaoscreater said:
Ahh cool, that saves me the trouble of me having to install an extra tweak.
Hmm I know Milestone is old, but not that old is it?? I don't know of any games now days that require heavy hardware specs or anything......i'm just hoping that emulators will work fine on it. I mean, my iPod Touch 3rd Gen only has about 120MB of free RAM, and the CPU is crap as hell and yet I could run GBA games like Pokemon or Golden Sun fine no problem (with sound of course). I'm hoping it'll at least work smoothly on the Milestone since I'll be attempting to overclock it to 1Ghz, which should run it significantly faster in theory.
BTW I found this great tweak for the CM7, here's the link:
http://chromloop.com/2011/07/how-to-make-cyanogenmod-7-for-milestone-a853-lighter-and-faster/
are there any ones similar to this? I'm a tweak junkie addict, I like to make my device run as smooth and as fast as possible. When I still had my HTC Touch Pro and Xperia X1, and even Nokia N900 (which uses Maemo 5), I tweaked the crap out of them and got more juice and power and made its performance so much better. I'm hoping I can at least do the same for the Milestone, except I couldn't seem to find many tweaks...
Oh lastly, I know one of the big problems with Android is fragmentation. There're already some apps out there in the Android market that are exclusive to certain Android versions. The same app has a version for Froyo (v2.2) and Gingerbread (v2.3). This is true for some of the mods or tweaks on XDA. So my question is, are custom roms like CM7 using Gingerbread? I'm guessing yes since it says 2.3.5? In that case, would I be able to simply install the latest mod/tweak or apps/games from XDA or the Android market? Or must I find the versions that is identical to mine?
E.g. if I install CM7, can I still install a mod that is for Froyo?
Click to expand...
Click to collapse
Of course you still can. The best tweak for Milestone is under Android Hacking, it's zeppelinrox's supercharger script, which you run through Script Manager. That's the best you can get.
Sent from my Milestone using XDA Premium App
I thought custom roms like CM7 or IceandFire come with the supercharger script included?
chaoscreater said:
I thought custom roms like CM7 or IceandFire come with the supercharger script included?
Click to expand...
Click to collapse
Some do, such as HO!NO!, but not all of them do.
Sent from my Milestone using XDA Premium App
Ok so I finally got my Milestone today!
I'm about to start rooting it and install CM7 on it. But before I do that, I have one important question. I know for Windows Mobile, almost all of the device requires you to do a hard reset after flashing a custom rom. I was wondering if the same needs to be applied to Android custom roms? Because it doesn't seem like it, I did a quick Google search and found this:
http://androidforums.com/optimus-v-...4-do-not-factory-reset-your-rooted-phone.html
So ya I'm not sure....
UPDATE:
Ok so I got my Milestone rooted, and installed CM7 on it. I came across a weird problem while doing it though. First of all, I'm using a 8GB Kingston microSD class 2, and it's brand new and hasn't been used before, so it obviously has nothing stored on it as it's empty to begin with. Ok, so as I followed the instructions, the first step is obviously rooting the Milestone, so I simply copied OpenRecovery to the memory card while my Milestone was connected to my PC. The weird thing is, when I opened "My Computer", I didn't see my memory card. Instead, I see "Milestone", so I opened it and then I see my memory card "Removeable Storage". I opened it again and here's the actual weird part, there're 2 files stored in it, called:
DevIcon
DevLogo
At first, I didn't think it was a problem because I thought they were just some dummy file or something. Also, the memory card is empty other than those 2 files. So after copying OpenRecovery to it and rooting it successfully, I then proceed to copy the CM7 custom rom file to the memory card. But this time, I still see the same thing. I don't see my OpenRecovery folder on it at all, there're no other files other than those 2 files on it. I tried Unmount and Mount in the SD Card settings, also unplugging my USB cable and re-plugging back in but it's the same. In fact, after 'Unmounting' the memory card, I couldn't even access it on "My Computer", as nothing shows up after I open "Milestone". Only 'Mounting' works, but again I only see those 2 files and nothing else.
HOWEVER, I then tried to take out the memory card and use my own microSD card reader, and bam I can see all the files on it, such as OpenRecovery and even the nanDroid backup that I made while following the instructions on that guide. So this is weird, why can't I access or see the contents on my memory card while the phone is connected to the PC??
I don't wanna create another topic for this since it's unnecessary, so here's my final question. In case something goes wrong in the future, what's the best way for me to revert back to stock?
I know I can use nandroid for this, but here's what i'm confused about. Nandroid makes a backup of the complete system, including the settings and apps installed correct? But what if you flash a custom rom, and then use a nandroid backup of the stock rom, will that still work? Or would you have to install the stock rom first for you to be able to use the nandroid backup?
Lastly, if the nandroid backup works regardless of whether you're using a different rom than the rom that the nandroid backup was made, then which option is better:
use nandroid to revert to stock, or using this guide here:
http://forum.xda-developers.com/showpost.php?p=11902513&postcount=7
Now I understand that for Milestone, custom roms are not actually flashed since the bootloader is locked. So would using nandroid be good enough?
chaoscreater said:
I don't wanna create another topic for this since it's unnecessary, so here's my final question. In case something goes wrong in the future, what's the best way for me to revert back to stock?
I know I can use nandroid for this, but here's what i'm confused about. Nandroid makes a backup of the complete system, including the settings and apps installed correct? But what if you flash a custom rom, and then use a nandroid backup of the stock rom, will that still work? Or would you have to install the stock rom first for you to be able to use the nandroid backup?
Lastly, if the nandroid backup works regardless of whether you're using a different rom than the rom that the nandroid backup was made, then which option is better:
use nandroid to revert to stock, or using this guide here:
http://forum.xda-developers.com/showpost.php?p=11902513&postcount=7
Now I understand that for Milestone, custom roms are not actually flashed since the bootloader is locked. So would using nandroid be good enough?
Click to expand...
Click to collapse
The best way to revert to stock will be to flash an sbf for your region that will wipe everything. They have those sbf's on and-developers.
Sent from my Milestone using XDA Premium App
Ahh I see, so in what situations will we be using nandroid to restore from the backup?
Also, the SBF file i'm using is from the guide that you linked me in your 2nd post. I'm using the EUROPE one because apparently it covers most of the countries around Europe, which includes New Zealand (where I live). I've had no problems with it, but just then I checked out the AND-Developers site like you suggested, and found this here:
http://and-developers.com/sbf:milestone221
It doesn't seem to have New Zealand but it does have Australia, which is like a neighbour to us. Will it be better if I flash the SBF to that instead?
Also, will flashing a SBF change the radio? Or does only changing the baseband change the radio? Because i'm getting weak signals from 2G/3G sometimes, and my Wifi has problems sometimes not being able to connect properly. Either that, or it shows that i'm connected but i'm not getting any data, apparently a lot of people have problems like this after I did some searching around.
chaoscreater said:
Ahh I see, so in what situations will we be using nandroid to restore from the backup?
Also, the SBF file i'm using is from the guide that you linked me in your 2nd post. I'm using the EUROPE one because apparently it covers most of the countries around Europe, which includes New Zealand (where I live). I've had no problems with it, but just then I checked out the AND-Developers site like you suggested, and found this here:
http://and-developers.com/sbf:milestone221
It doesn't seem to have New Zealand but it does have Australia, which is like a neighbour to us. Will it be better if I flash the SBF to that instead?
Also, will flashing a SBF change the radio? Or does only changing the baseband change the radio? Because i'm getting weak signals from 2G/3G sometimes, and my Wifi has problems sometimes not being able to connect properly. Either that, or it shows that i'm connected but i'm not getting any data, apparently a lot of people have problems like this after I did some searching around.
Click to expand...
Click to collapse
1. when you're phone will not start anymore, it's good to have one before every new flash cause you never now what's gonna happen.
2. funny thing is i know where New Zealand is (not near Europe) . about the baseband ... yes every sbf has the region specific baseband 's (you cant flash a radio only change baseband 's).
baseband can be found on dexter's (http://dext3r.komodin.org/) page but they are already included in OR (not sure about fufu's). i can't be very precise because i don't remember.
custom rom's don't think they change baseband 's, (the .zip ones)
Ya ur right, NZ is not anywhere near Europe lol
but I did do some research on which SBF I needed before I flashed it, and I found out that the Europe SBF works for NZ as well, it was mentioned somewhere I can't remember.
About the baseband, I'm still a little bit confused. First off, I already know that you can change the baseband under OpenRecovery. The thing is, there are no options to change the baseband to New Zealand, so which one should I pick? Also, here's the part I'm confused about. You said that the baseband are region specific, and yet we can choose the baseband we want in OpenRecovery.
So since I flashed the SBF for Europe, what will happen if I then change the baseband to say Argentina (one of the options under OpenRecovery)? Will it crash or something?? I don't even know what baseband i'm using right now, I haven't changed anything, I only flashed the SBF for Europe and that's it. I can still go online using 2G/3G and txt no problem, but I'm just not sure if the baseband i'm using is suppose to be correct for New Zealand or not...
BTW just another side question (sorry I'm really new to the Android scene!):
I've found a few custom roms that doesn't use the current kernel we have for Milestone. As far as I know, the bootloader for Milestone is locked, therefore we can't properly flash a custom rom onto it, as well as replacing the kernel as well. So what I'm confused with is, if some of these custom roms don't use the current kernel on the system, then how does it work? Does it use its own kernel, and if so then shouldn't that replace the system's own kernel before it can be used??
Here's one of the custom rom topic where I read from, in case ur wondering:
This is the Froyo FRG22 image for our Milestone. but as this is not using the kernel, there are some limit to functions based on kernel requirement. But its close, and works great and is alot faster.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=734802
The same goes for the custom roms. I don't understand how they can run on Milestone even though it's not properly flashed. Like some others have mentioned, the so-called "custom roms" that we have now are just a layer of image or skin on top of the stock rom. The weird thing is, it runs faster and most of the pre-installed stock apps that came with the stock rom are removed, thus giving us more space for internal storage. But how does this work if the custom roms haven't actually flashed onto our phone? Or did it overwrite/modify the files on the stock rom? If so, then isn't that just flashing onto the phone then?
chaoscreater said:
About the baseband
Click to expand...
Click to collapse
changing baseband's that are not supported by your network op will lead to no signal whatsoever.. i don't remember if there is a problem with only data. try other baseband, in theory it will not crash anything, so do a nandroid backup before
http://forum.xda-developers.com/showthread.php?t=734802
Click to expand...
Click to collapse
that is an old post from "25th July 2010, 05:52 AM" moto started to leak kernel from January 2011 give or take a month, so back then froyo was used with the eclair kernel. kernel from milestone was never changed to other than moto signed, only modules loaded at an early stage, thanks to kabaldan/nadlabak and other if exists
custom roms =
moto kernel
kernel modules (this helps on overclock , app2ext ... others)
mods to system files, apps
hope you understand cause i don't know if i make it clear at the end of the post
edit:
The same goes for the custom roms. I don't understand how they can run on Milestone even though it's not properly flashed. Like some others have mentioned, the so-called "custom roms" that we have now are just a layer of image or skin on top of the stock rom. The weird thing is, it runs faster and most of the pre-installed stock apps that came with the stock rom are removed, thus giving us more space for internal storage. But how does this work if the custom roms haven't actually flashed onto our phone? Or did it overwrite/modify the files on the stock rom? If so, then isn't that just flashing onto the phone then?
Click to expand...
Click to collapse
i doesn't make any sense, you will end up with no memory , only kernel remains, other things gets rewritten.
Code:
http://www.vodafone.co.nz/roaming/welcome-to-nz.jsp
this get out of what i know. with the frequencies,
basebands/frequency i have 900/1800
for data check if there is a problem with your apn settings
I see, thanks for your thorough explanation
Ya I know that changing my baseband will probably give me better signals, but I'm asking which one is best for Vodafone NZ because there isn't a baseband for New Zealand.
For the data part, were you talking about my wifi problem, and suggesting I check the APN settings? Don't worry that's been solved already. I flashed to the New Zealand v2.1 SBF and now it's working very stable. But like I said, after flashing to that I now have problems with connecting to my operator whenever I switch to 2G. However, 3G works fine so there's no problem with that.
BTW, I have another problem. After flashing to the New Zealand v2.1 SBF, I couldn't access my OpenRecovery anymore. I didn't delete or change any files on my memory card, so if I could access OpenRecovery and root my device as well as flash a custom rom when I was still on Froyo, then why can't I do it again when I flash to Eclair?
I *think* I know the reason, is it because it patched the vulnerable recovery or something? I think this is what I need to do to fix this:
http://android.doshaska.net/rootable
I haven't done it yet coz i'm busy these days, but i just need a confirmation so I know that it is indeed the case.
I *think* I know the reason, is it because it patched the vulnerable recovery or something? I think this is what I need to do to fix this:
http://android.doshaska.net/rootable
I haven't done it yet coz i'm busy these days, but i just need a confirmatio
Click to expand...
Click to collapse
true story . it should say something about eocd marker and fail.
http://forum.xda-developers.com/showthread.php?t=698059
For the data part, were you talking about my wifi problem, and suggesting I check the APN settings?
Click to expand...
Click to collapse
sorry... i don't know, last night i thought i read something else, about working 3g and 2g not ..must be the skittles... to much rainbow
i suggest finding out what country baseband are similar to New Zealand and flash/apply that one )
Hello guys.
Before I go into it, let me start by saying I'm a complete noob at these things.
A couple of months ago (following guide on the net), I rooted my Optimus P990 and installed my first custom ROM.
Tonight I looked on the net to look at how to restore my device to stock.
I followed this guide.....
http://forum.xda-developers.com/showthread.php?t=1327599
It didn't work!!!!
Although the phone is still working, I have completely lost internet connection on network and wireless.
I'm worried about trying anything else in case I mess my phone up!!
Can anyone out there help me restore back to stock in noob dialogue??
Thanks in advance
Make a backup of everything.
Then go to recovery and wipe everything!
Perform a fresh install of your current rom + kernel combination.
Boot phone and everything should work now don't forget to restore your backups.
Thanks for the quick reply.
Will try it tomorrow.
Stupid question but what is the kernal?
Every rom comes with stock kernel, which is more or less a sort of 'driver' for your phone. Anyway, you don't really have to know what it is, only what you can do with it.
Custom kernels allow you to overclock your CPU frequency, this will make your phone faster and smoother. For example, stock kernel only allows your CPUto clock at the standard 1.0 Ghz, and custom kernels will let you overclock to 1.5 Ghz.
Custom kernels also allows you to Undervolt your phone. This means that you can turn down the voltages used at each CPU frequency. This will improve battery life. Custom kernels do much more things... But these two are the most important.
Look at my signature for the ETaNa Kernel, and read it for more information.
Ah ok thanks.
Is there a stock ROM that your aware of?
Sorry. When I say stock I mean revert my phone back to how it was when I first got it.
Clynchy said:
Sorry. When I say stock I mean revert my phone back to how it was when I first got it.
Click to expand...
Click to collapse
Have you tried restoring it using LG's PC Suite?
No not yet. I'm currently using a custom ROM. Cant remember which one it is.
Would an update via LG's PC Suite overwrite this firmware??
To reach your goal you must flash with nvflash technique, search in dev section thread about this. It will restore a stock phone, erasing recovery and root.
Lg PC suite won't be able to flash over a modified phone.
Ok. Thanks. What's the risk to my phone?
Sent from my Optimus 2X using XDA App
If you want to restore your phone to stock then head over to the MoDaCo site and look for a pinned topic in section on the LG O2X entitled "NVflash stock ROM release."
Following the instructions will restore the stock ROM from March 2011 to your phone.
Hi Guys,
Hope someone a bit more clued up than myself can clarify my questions or guide me..
I've done some searching, but am not 100% confident.
So, I have a I9305 running a Boeffla Kernel 5.2. If I recall correctly, I upgraded from 4.1.2 to 4.3, but
kept my old bootloader. So I am rooted and have TWRP on this 4.3 based CFW. No KNOX anywhere.
(Did all this about 12 months ago or more, and have had some significant life events in the last year,
so have been completely out of the scene.. )
Anyway, I was considering upgrading to 4.4.4 (stock)
Can anyone tell me if I can do this and remain Knox free and have a custom recovery such as TWRP.
(If so can you point me to a working guide?)
Thanks Heaps in Advance,
BrikHaus
BrikHaus said:
Hi Guys,
Hope someone a bit more clued up than myself can clarify my questions or guide me..
I've done some searching, but am not 100% confident.
So, I have a I9305 running a Boeffla Kernel 5.2. If I recall correctly, I upgraded from 4.1.2 to 4.3, but
kept my old bootloader. So I am rooted and have TWRP on this 4.3 based CFW. No KNOX anywhere.
(Did all this about 12 months ago or more, and have had some significant life events in the last year,
so have been completely out of the scene.. )
Anyway, I was considering upgrading to 4.4.4 (stock)
Can anyone tell me if I can do this and remain Knox free and have a custom recovery such as TWRP.
(If so can you point me to a working guide?)
Thanks Heaps in Advance,
BrikHaus
Click to expand...
Click to collapse
Hi,
you have 3 options:
- Option #1: Stay with your old 4.1.2 firmware base with OLD bootloader and you can flash which custom KitKat ROM you want (N4 Elite ROM, TGP, AMCHA KK, etc.). If your favorite ROM is NOT compatible with TWRP, you will have to flash PHILZ recovery 6.48.4 instead and then flash the ROM. If the custom ROM is compatible with TWRP, you will only have to flash the ROM.
When you will flash the ROM, don't forget to choose a KK modem (XXUFNI3, XXUFNJ1 or XXUFOA1 depending on the ROM base) to have a working baseband and also, don't forget to choose a compatible Kernel with OLD bootloader (AGNi, HBO kernel or Dlite). Note : Stock kernel is not 100% compatible with OLD bootloader : WIFI will not work.
- Option #2: Upgrade to latest official 4.4.4 stock (I9305XXUFOC1) for i9305 with ODIN : this way, you will have new 4.4.4 KNOX bootloader and you will not have custom recovery anymore. If you want to stay like this, you will be 100% stock and 100% up-to-date from Sammy.
- Option #3: Follow the option #2 and then root your phone and flash custom recovery. You could finally stay like this or flash a custom ROM. If you choose to flash a custom ROM, one good thing is that you will be able to use stock kernel (100% working including WIFI) if available with this ROM.
You can follow that guide from @MaHo_66 : http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
Reminder: To go VERY clean wipe and install a custom firmware :
1. Backup all your data
2. Full wipe (data, cache and dalvik) in recovery including internal sdcard (internal sdcard format option in mounts and storage settings)
3. Flash a i9305 official firmware (4.1.2, 4.3 or 4.4.4) via ODIN. IMPORTANT : If you don't want KNOX BL because of warranty purpose, don't flash official 4.3 or 4.4.4 via ODIN.
4. Root
5. Flash custom recovery : (Philz for instance)
6. Install custom ROM
Steps 4 and 5 can be permuted.
PS: Off topic : @MaHo_66, you're now a RC, well done !
Thanks @FLooDW
Btw. youre spot on as always helping others, very good explanation you gave here :good:
MaHo_66 said:
Thanks @FLooDW
Btw. youre spot on as always helping others, very good explanation you gave here :good:
Click to expand...
Click to collapse
Thanks
Ok, if it's good, I hope it will help BrikHaus.
FLooDW said:
Thanks
Ok, if it's good, I hope it will help BrikHaus.
Click to expand...
Click to collapse
Im pretty sure it will
Legend!
Thank you VERY MUCH @FLooDW! Wish I could give you 10x Thanks!
Just the answer I was after. I wasn't sure if it was even possible to have a custom recovery on KNOX 4.4.4 bootloader.
I dropped out of the scene just as KNOX raised its ugly head...
I'm not worried about the warranty at all. Phone is two years old and well out of warranty period.
I'll go Option #3, sounds like just what I was after.
Thanks again!
BrikHaus said:
Thank you VERY MUCH @FLooDW! Wish I could give you 10x Thanks!
Just the answer I was after. I wasn't sure if it was even possible to have a custom recovery on KNOX 4.4.4 bootloader.
I dropped out of the scene just as KNOX raised its ugly head...
I'm not worried about the warranty at all. Phone is two years old and well out of warranty period.
I'll go Option #3, sounds like just what I was after.
Thanks again!
Click to expand...
Click to collapse
Yes you can have custom recovery with Knox BL. It's my case and everything is ok for me.
I hope you'll be ok
Please let us know.
I saw your sig..
Philz looks like it has more features than TWRP.. Might try that.
How do you find your performance with that kernel & rom?
Cheers Mate.
BrikHaus said:
I saw your sig..
Philz looks like it has more features than TWRP.. Might try that.
How do you find your performance with that kernel & rom?
Cheers Mate.
Click to expand...
Click to collapse
I'm very happy about perf with latest Amcha and AGNi. I have between 26000 and 26600 in AnTuTu without any overclock.
User experience is great in my case.
I don't use Fly-on mod (available in Amcha for instance) because I've noticed some big lags with my config on my phone.
All went pretty well. Had a couple of hangs, but got them all sorted.
Currently restoring, but having an issue where the phone switches from "USB Media mode" to "Dock Mode" and back and forth.
Weird issue I've never seen before....
BrikHaus said:
All went pretty well. Had a couple of hangs, but got them all sorted.
Currently restoring, but having an issue where the phone switches from "USB Media mode" to "Dock Mode" and back and forth.
Weird issue I've never seen before....
Click to expand...
Click to collapse
About your USB media / Dock issue, I've never read such problem. Moreover, I don't use dock at all. I will not be very helpful about this. Sorry.
FLooDW said:
About your USB media / Dock issue, I've never read such problem. Moreover, I don't use dock at all. I will not be very helpful about this. Sorry.
Click to expand...
Click to collapse
Yeah I don't use dock either. It seems it gets confused about what its actually plugged into..
Anyway, I'll figure it out. Thanks heaps for your help Mate. Very much appreciated.