Related
Here are my doubts: Captivate on 2.2 no root
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
5)Do I need to go back to stock every time I want to flash a different rom?
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
jmtheiss said:
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Click to expand...
Click to collapse
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
DudeWatsThat said:
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
Click to expand...
Click to collapse
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
jmtheiss said:
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
Click to expand...
Click to collapse
Thanks again
I don't plan on flashing 2.3 roms until the official 2.3 release come out
Theres a Odin that flashes stock 2.2 instead of 2.1 can I use that one instead?
Theres a Odin that flashes stock 2.2 instead of 2.1
Click to expand...
Click to collapse
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
jmtheiss said:
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
Click to expand...
Click to collapse
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
DudeWatsThat said:
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
Click to expand...
Click to collapse
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
jmtheiss said:
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
Click to expand...
Click to collapse
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
DudeWatsThat said:
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
Click to expand...
Click to collapse
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
jmtheiss said:
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
Click to expand...
Click to collapse
Eh i got it into download mode and i pressed start on odin but i think its stuck did i have to root first and then use odin im kinda scared right now
Edit:its showing a phone a warning sign and a Pc like connect phone to pc
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)? It should look similar to the attached file.
jmtheiss said:
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)?
Click to expand...
Click to collapse
Eh yes its i managed to trouble shoot it and its reboting everything is ok and yes it did show a yellow text box as of right now i just need to pop in the sym and reboot i have succesfully flashed 2.1 i just need to root and get CWM thru Room manager correct me if im wrong.
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
jmtheiss said:
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
Click to expand...
Click to collapse
I just rooted now all I need is CWM and thank you for all your help!
Glad it worked out. Don't be afraid to ask more questions in the future, as a reply to a question you've asked could help someone else with the same question out.
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Miami_Son said:
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Click to expand...
Click to collapse
I did ALOT of searching before thinking of posting this,the reason I did it was because most of the post are from 2010 and I had doubts on if I should use those methods or if there where new ones.This is the Q&A sub-forum right?I did just that ask questions.
Okay. So, I've just acquired a Galaxy Tab off eBay. It's on it's way to me, so I thought I'd burn up a few cycles and go download some goods for flashing as soon as I get it.
The setup: ROM version is Gingerbread. Assume Stock ROM. Model is P1000 (Unlocked GSM).
The question is this. I am completely confused as to what I need to do, and I'd like someone to point me in the right direction. With other devices, I would just root, install custom recovery and voila. Non-stock device. Does this same rule apply with the Galaxy Tab, or is it a new ball game?
Basically, what is the easiest way of getting a custom ROM onto my Galaxy Tab? Do I need to use ODIN and co? Or can I do it all via recovery? Is there any n00b guides that explain installing your first ROM?
I don't want to jump through hurdles that I could have avoided. So, that's why I'm asking you for help. Put me out of my confusion, get a +1 thanks in return. Sounds good, no?
Thanks again. Your help is appreciated.
good day sir.
basically is the same with otherdevices,
root it, install clockworkmod, download and install roms
you will need to flash via odin first because stock rom of gtp1000 have limited options in the recovery mode.
after that, all flashings can be done vie clockworkmod recevery... for your convenience search for these ff. keywords:
overcome kernel
overcome rom
zergrush
cm9 rom
humberos.
no need for thanks buton, i just want to ask you to refrain posting posts in the development forums if you think your post will not contribute to the development, too many assholes there beating each other up and flooding the forum of bullshits.
thanks.
Alright, thanks for the explanation, I appreciate it! Seems to be making sense now...
So, basically, with any ROM I flash, I must use ODIN to flash the kernel? Or will the ROM take care of that? I heard the kernel is mixed in with the recovery system, so I'm a little unsure as to what the go is.
no u just need o flash a kernel with clockworkmod recovery and all succeding flashings be it rom, kernel or anything else canbe done using clockworkmod recovery. of course there are exceptions if the developer specifically requires u to flash via odin
You should follow the Overcome Guide for your first flash, it is comprehensive and easy peasy, lemon squeezy
There are some pics missing in the linked page, I have a cached copy from google that you can refer to also.
GL.
Make back up or the original or current rom
I would like to flash my tab with a custom rom, but I also want to be able to revert or go back to the original rom. My question is how you back up your current or original rom so you could restore it back to its original condition? CMIIW but Titanium back up only back up the apps and stuffs but not the rom, or is it?
ChevanLemon said:
I would like to flash my tab with a custom rom, but I also want to be able to revert or go back to the original rom. My question is how you back up your current or original rom so you could restore it back to its original condition? CMIIW but Titanium back up only back up the apps and stuffs but not the rom, or is it?
Click to expand...
Click to collapse
Please do not hijack my thread. You should make another thread for that - and that's what CWM is used for - making backups!
I've read up several threads on this an I think what I want to do is a bit unique but I am not completely sure. I rooted my phone with Odin a week ago going from official gingerbread and used the stock Kernel. Root went off without a hitch but wasn't able to get into CWM recovery so I did some searching and just now flashed to the Corn Kernel 7.05. Works Perfect !
I want to now use mobile Odin to try out a few new roms as I can upgrade my phone now but want to give this a shot to breath some new life into my nearly 2 year old cappy. Flashing the kernel with mobile odin was s snap but I guess after reading the how and developers page I am lost on what types of ROM's I use with it. I'm new to all of this so judging stages of stability if not something I am sure about. I want some I wont have to compromise much with but will broaden my horizons some. I am so new cyanogen and maybe doc's ICS mod are the only ones I really know about but I don't know if those work with Odin or if I need to use CMW.
So final questions are these:
- Mod that will be stable and I can flash using only mobile odin or CMW (not using a PC) ?
- Does creating a backup of the ROM in CMW allow me to fix a bad ROM flash ?
- Is there an ICS build for cappy that will work for my situation ?
Thanks again ! ( I promise I used the search function and even the mobile odin thread but couldn't find what I was looking for)
1. Mod that will be stable and I can flash using only mobile odin or CMW (not using a PC) ?
2. Does creating a backup of the ROM in CMW allow me to fix a bad ROM flash ?
3. Is there an ICS build for cappy that will work for my situation ?
Click to expand...
Click to collapse
1. You can basically flash almost anything that isn't stock through CWM; you don't really need mobile odin too much. There are a lot of things considered "stable" that may not be stable for you. I considered alpha CM9 "stable," but others may disagree. It is up to you to find a ROM that suits you the best.
Keep in mind, you can only use Mobile Odin on Samsung-based BML ROMs.
2. To fix a "bad" ROM flash, you'd probably just flash the ROM again. But you can use the backup to restore your phone to its exact state at time of backup (with few exceptions).
3. What exactly is your situation? No matter what, I recommend CM9 nightlies but there certainly are other things out there to try that could work for you. Everything is CWM flashable, no Odin.
Just wondering, why can't you use a computer at all? You may need one in case you screw something up down the road.
korockinout13 said:
1. You can basically flash almost anything that isn't stock through CWM; you don't really need mobile odin too much. There are a lot of things considered "stable" that may not be stable for you. I considered alpha CM9 "stable," but others may disagree. It is up to you to find a ROM that suits you the best.
Keep in mind, you can only use Mobile Odin on Samsung-based BML ROMs.
2. To fix a "bad" ROM flash, you'd probably just flash the ROM again. But you can use the backup to restore your phone to its exact state at time of backup (with few exceptions).
3. What exactly is your situation? No matter what, I recommend CM9 nightlies but there certainly are other things out there to try that could work for you. Everything is CWM flashable, no Odin.
Just wondering, why can't you use a computer at all? You may need one in case you screw something up down the road.
Click to expand...
Click to collapse
1. Thank for clearing that up. I was using mobile odin at first because I wasn't able to boot into recovery with CWM but with the corn kernel that fixed everything and I've been getting myself more accustomed to working in there. Mobile odin seemed good for me to flash the new kernel easily and care free.
2. I was worried about a bad flash because I've read that using nandroid backups can be iffy (That's what CWM uses from what I have seen). Should I trust these backups ? I backed up everything in TiBu. I looked at the Wiki for cyanogen mod and it seems odd that the steps to flash the ROM's in CWM are very few so having few steps makes me think they have left something out or there is a step that is somehow understood I am missing)
3. I live in the boonies and my internet is even slower even though it's *cringe* 1.5 DSL haha. As far as my situation I mean something that would allow me to mess around with my phone some while knowing its stable because with 3 kids and having to have my phone I didn't want to be out of pocket for an extended period of time. I've been reading that ICS requires you to go back to stock to flash another ICS ROM but in my mind that doesn't seem too inconvenient.
I come from the desktop world and work well with hardware, not so much with software knowledge so trying to teach myself some new stuff since mobile seems to be here to stay. Making just a rudimentary app is a goal of mine even if no one cares so starting at the beginning trying to learn. Don't want to be one of those guys the noob video is made for who just begs for the way to root a phone and never contributes haha.
Thanks for your help !
Before you start reading, please make sure, you are 100% sure of ur answers, and that you have TIME to answer them ALL with clarification
Really thanks for ur time and help!
So i got a samsung galaxy ace, it's rooted and with b84 CF-Root kernel.
1) The thing is sometimes, I press Wi-Fi button or Bluetooth, and in the Wifi it says Error and on bluetooth just won't conect. I don't know what the problem is, and the only solution is to reboot the phone. Is this a problem? Can it be fixed? If It can, how? If not, please read point number 2.
2) If its not fixable, what ROM you advice me to reinstall? I have s5830XWKS2, some people say the DDxxx8(or something like that) is better don't know why I'm no programmer...
2.1) If I really have to have to reinstall it in order to fix it, how can I do it? Can you point out the thread for it?
3) I run a small business, and I use Tasker for all my stuff. together with other 60+ apps I need to keep, i'm using SD card with ext partition with Link2SD. And the thing i'm most afraid of, is loosing all the data. I came from a Nokia 5800XM, and I flashed it some times, backups are easy to do. Now here on Android becomes a bit complicated. Maybe never someone cleared me enough about it. So what can I do to sucessfully restore all data on the new ROM? I got Titanium backups, and CWM..Will that backup even my dictionary saved words?
4) Thanks, and please, again, make notice that I can't loose anything due to my business, but I can't work with phone needing to reboot at random times cause of wifi or bluetooh beeing bricked.
First of all. There is no such things as urgent situation here. You should remember that.
Second thing. You should post questions in Q&A sub-section. General is for sharing and discussions.
Third thing. There is a adb logcat thingie, which allows to understand a root of your problem more than 'Help me. Something doesn't work'
I remain this thread open but move to correct section.
NunoPitbull said:
Before you start reading, please make sure, you are 100% sure of ur answers, and that you have TIME to answer them ALL with clarification
Really thanks for ur time and help!
So i got a samsung galaxy ace, it's rooted and with b84 CF-Root kernel.
1) The thing is sometimes, I press Wi-Fi button or Bluetooth, and in the Wifi it says Error and on bluetooth just won't conect. I don't know what the problem is, and the only solution is to reboot the phone. Is this a problem? Can it be fixed? If It can, how? If not, please read point number 2.
2) If its not fixable, what ROM you advice me to reinstall? I have s5830XWKS2, some people say the DDxxx8(or something like that) is better don't know why I'm no programmer...
2.1) If I really have to have to reinstall it in order to fix it, how can I do it? Can you point out the thread for it?
3) I run a small business, and I use Tasker for all my stuff. together with other 60+ apps I need to keep, i'm using SD card with ext partition with Link2SD. And the thing i'm most afraid of, is loosing all the data. I came from a Nokia 5800XM, and I flashed it some times, backups are easy to do. Now here on Android becomes a bit complicated. Maybe never someone cleared me enough about it. So what can I do to sucessfully restore all data on the new ROM? I got Titanium backups, and CWM..Will that backup even my dictionary saved words?
4) Thanks, and please, again, make notice that I can't loose anything due to my business, but I can't work with phone needing to reboot at random times cause of wifi or bluetooh beeing bricked.
Click to expand...
Click to collapse
Yes I experienced the same problem,could be software bugs problem so I think you can reinstall your software for the better.
I prefer cm mod7/8 for ace as it is much faster so you can try Google cyanogenmod for ace. They have all the tutorial you need.
As for your Apps, titanium backup will do fine. Its the best backup so far. Your dictionary words is the default system one? I recommend you smart keyboard pro as it has the function to backup all your words
So in short, backup your EVERYTHING with titanium backup, rmb your contacts too, and install cyannogen mod 7 or 8 whichever you prefer! Hope this helps!
Sent from my LG-P705 using xda premium
spaz1201 said:
Yes I experienced the same problem,could be software bugs problem so I think you can reinstall your software for the better.
I prefer cm mod7/8 for ace as it is much faster so you can try Google cyanogenmod for ace. They have all the tutorial you need.
As for your Apps, titanium backup will do fine. Its the best backup so far. Your dictionary words is the default system one? I recommend you smart keyboard pro as it has the function to backup all your words
So in short, backup your EVERYTHING with titanium backup, rmb your contacts too, and install cyannogen mod 7 or 8 whichever you prefer! Hope this helps!
Sent from my LG-P705 using xda premium
Click to expand...
Click to collapse
There's no such thing as cyanogen mod 8...only unofficial cm 7.1 kang and official cm 7.2...
Nunopitbull, wifi & bluetooth problems that you experience are caused by the kernel, not the firmware or rom...so my suggestion is to use a kernel that is not based on cf root or use a stock kernel (the one that came with your phone)...just root your phone with the update zip method will do, and for cwm flash the zip for it...the newest version for sga is 5.0.2.6...there's no need to flash a custom kernel...
About cwm backups, it backups your whole system and data partition and also your boot.img (kernel related)...so yes, it is quite safe to say that your whole phone is backup-ed...but keep in mind that stock roms use .rfs format for the partitions...new custom roms use .ext4 format...so to flash a backup of a stock rom, first flash a fresh stock firmware with ODIN and the cooper.pit file...then re-root and re-flash cwm to restore your phone...
And fyi, link2sd uses a second partition right? The apps inside the second partition can be relinked if you reset the phone...as long as you don't format the second partition...but personally I suggest you to use DTa2sd or amarulzz script as it saves more internal space...check it out...
Hope that all the above helps...
So you're saying my problem of wi-fi/bluetooth is because of kernel? Can you help me by PM how to get it working again? I wanted a custom kernel don't remember already why, but I think was for the custom speeds of CPU, so I could have low ones..
Just want this bug to disapear of bluetooth and wifi!
Ryuinferno said:
There's no such thing as cyanogen mod 8...only unofficial cm 7.1 kang and official cm 7.2...
Nunopitbull, wifi & bluetooth problems that you experience are caused by the kernel, not the firmware or rom...so my suggestion is to use a kernel that is not based on cf root or use a stock kernel (the one that came with your phone)...just root your phone with the update zip method will do, and for cwm flash the zip for it...the newest version for sga is 5.0.2.6...there's no need to flash a custom kernel...
About cwm backups, it backups your whole system and data partition and also your boot.img (kernel related)...so yes, it is quite safe to say that your whole phone is backup-ed...but keep in mind that stock roms use .rfs format for the partitions...new custom roms use .ext4 format...so to flash a backup of a stock rom, first flash a fresh stock firmware with ODIN and the cooper.pit file...then re-root and re-flash cwm to restore your phone...
And fyi, link2sd uses a second partition right? The apps inside the second partition can be relinked if you reset the phone...as long as you don't format the second partition...but personally I suggest you to use DTa2sd or amarulzz script as it saves more internal space...check it out...
Hope that all the above helps...
Click to expand...
Click to collapse
So far I haven't seen a custom kernel for sga that works flawlessly...especially the ones with oc function...only stock kernels work with the least problems...since you want to underclock, just use the stock kernel and set it to the lowest value with an app like set cpu...it shall do you fine...
Ryuinferno said:
So far I haven't seen a custom kernel for sga that works flawlessly...especially the ones with oc function...only stock kernels work with the least problems...since you want to underclock, just use the stock kernel and set it to the lowest value with an app like set cpu...it shall do you fine...
Click to expand...
Click to collapse
What are the other advntages with the CF Root kernel? I can't remmeber why I puted it, but I think they were another reason behind it...
Where I can get teh stock kernel? Or which one you advise?
Chill please...don't shoot questions in here...if you want quick answers, please search about it (e.g. go to the cf-root thread and read about the features, I don't memorise them, but I believe you want the overclock and a2sd features)...If you want direct answers, you will have to wait...
I understand that you need your phone for your business, it's very important to you...I'm trying my best to help out here ok? To get a stock kernel, just flash a stock firmware via ODIN...but you will have to re-root and re-flash cwm...any stock kernel will do, as long as it is with the firmware you flashed...
Ryuinferno said:
Chill please...don't shoot questions in here...if you want quick answers, please search about it (e.g. go to the cf-root thread and read about the features, I don't memorise them, but I believe you want the overclock and a2sd features)...If you want direct answers, you will have to wait...
I understand that you need your phone for your business, it's very important to you...I'm trying my best to help out here ok? To get a stock kernel, just flash a stock firmware via ODIN...but you will have to re-root and re-flash cwm...any stock kernel will do, as long as it is with the firmware you flashed...
Click to expand...
Click to collapse
Chill what? I'm not in a hurry for answers You answer when you can. I jsut reply when I can, if it was fast, I didn't noticed
I remember to put this kernel i did something from CWM reboot, your saying i need to reinstall a full ROM to get the stock kernel?:S And what's ODIN
Reply when u can, im in no hurry ;D
NunoPitbull said:
Chill what? I'm not in a hurry for answers You answer when you can. I jsut reply when I can, if it was fast, I didn't noticed
I remember to put this kernel i did something from CWM reboot, your saying i need to reinstall a full ROM to get the stock kernel?:S And what's ODIN
Reply when u can, im in no hurry ;D
Click to expand...
Click to collapse
Yea...a full stock samsung rom..you might wanna look at this
http://forum.xda-developers.com/showthread.php?p=12874680
Is your Samsung Galaxy Ace a GT-S5830 or a GT-S5830i ??
Sent from my GT-S5830i using xda app-developers app
If you want only professionals to answer your questions, take your phone to the Samsung Engineers....
Sent from my GT-S5830 using Tapatalk 2
NunoPitbull said:
Before you start reading, please make sure, you are 100% sure of ur answers, and that you have TIME to answer them ALL with clarification
Really thanks for ur time and help!
So i got a samsung galaxy ace, it's rooted and with b84 CF-Root kernel.
1) The thing is sometimes, I press Wi-Fi button or Bluetooth, and in the Wifi it says Error and on bluetooth just won't conect. I don't know what the problem is, and the only solution is to reboot the phone. Is this a problem? Can it be fixed? If It can, how? If not, please read point number 2.
Click to expand...
Click to collapse
Try flashing a new kernel, this is NOT a rom issue, just a kernel issue.
What i have done in the last 24 hours:
1. Updated to 4.3 on stock ROM
2. Unlocked bootloader on my Z1
3. Flashed "PhilZ Touch 6" dual bootloader (idk what "dual means" :S) (Dec 3 2013 version)
4. Used the built in root tool in "PhilZ" to root my phone and installed the corresponding app "SuperSU"
Questions:
Does bootloaders come with a custom kernel?
My bootloaders "About" says its made for the "Z" (not Z1). Did i **** up or is this incorrect?
If i flash kernel (for my device) via CWM will i break something?
Does roms require a certain kernel?
Can i flash .img files via CWM or is it required that the file is .zip?
I see kernels on the forum that advertise being 4 kitkat, do i need to flash that kernel WITH a kitkat rom to use that kernel?
Why shuld i flash a kernel?
As CM is not officially supported on the Z1 yet is there a cool alternative rom i can use?
Thats all the Q's i came up with, hope you can help me answer my ridiculous questions and wish me luck on my first android phone! :good:
bump
I won't get my device until tomorrow, but there a few things I could explain:
Some ROMs need to have a specific kernel. You cannot use Stock kernel with Cyanogenmod, or vice versa. Custom kernels are often a good idea to flash if you want some extra optimizations, you can get extra performance and save battery life with an enhanced kernel.
As for an alternative ROM, why don't you just check out the dev forums? There are Cyanogenmod ROMs, they're just unofficial.
Also, did you back up your TA? Otherwise, you'll be in for some real big trouble.
kusanou said:
I won't get my device until tomorrow, but there a few things I could explain:
Some ROMs need to have a specific kernel. You cannot use Stock kernel with Cyanogenmod, or vice versa. Custom kernels are often a good idea to flash if you want some extra optimizations, you can get extra performance and save battery life with an enhanced kernel.
As for an alternative ROM, why don't you just check out the dev forums? There are Cyanogenmod ROMs, they're just unofficial.
Also, did you back up your TA? Otherwise, you'll be in for some real big trouble.
Click to expand...
Click to collapse
****, i did not backup my TA. What does that mean for me?
I read in some threads that TA only gives you the option to revert back to absolute factory defaults. As i am having no problems i dont see why i would do that.
Edit: Thats wierd, my TrackID still works after unlocking bootloader, flashing recovery and rooting. Am i super lucky?
mrzone64 said:
****, i did not backup my TA. What does that mean for me?
I read in some threads that TA only gives you the option to revert back to absolute factory defaults. As i am having no problems i dont see why i would do that.
Edit: Thats wierd, my TrackID still works after unlocking bootloader, flashing recovery and rooting. Am i super lucky?
Click to expand...
Click to collapse
It's mostly needed for Bravia engine stuff, as well as the BIONZ image processor. I guess if you don't care too much about that, and you don't have any reason to have to go back to absolute factory settings in the case of a warranty return, then it should be fine.