Database Develop

[Resolved][Q] N7000 Asylum_CM10.1 20130416 Status 7 installation aborted

Hi there,
I ran into a problem with two latest Asylum Roms (Asylum_CM10.1 20130416 Mako and n7000), after flashing I got Status 7 and installation is aborted on both; i got assert failed getprop("ro.product.device"). I was following instructions from http://forum.xda-developers.com/showthread.php?t=2098655&highlight=flash while on cm matrix kernel http://www.mediafire.com/?q6b645akxi99l27.
Yes I did various md5sum checks.
Can someone help me out to get Asylum Rom working?

USE CM 10.1 KERNEL..DOWNLOAD FROM http://forum.xda-developers.com/showthread.php?t=1789397. THIS WILL HELP FOR SURE.

will try now
thx
Mayank Chandwani said:
USE CM 10.1 KERNEL..DOWNLOAD FROM http://forum.xda-developers.com/showthread.php?t=1789397. THIS WILL HELP FOR SURE.
Click to expand...
Click to collapse

i just realized while doing a full wipe I get an error:
E: format_volume: make_extf4fs failed on /dev/block/mmcblklp2
Click to expand...
Click to collapse
Should I be verymuch worried or can one proced with this error?

Mayank Chandwani said:
USE CM 10.1 KERNEL..DOWNLOAD FROM http://forum.xda-developers.com/showthread.php?t=1789397. THIS WILL HELP FOR SURE.
Click to expand...
Click to collapse
After flashing the latest Kernel_CM10.1_Official_20130403_n7000_N8Mali.zip I still continue with the same status 7 and getprop error and the installation is aborted

laketbr said:
After flashing the latest Kernel_CM10.1_Official_20130403_n7000_N8Mali.zip I still continue with the same status 7 and getprop error and the installation is aborted
Click to expand...
Click to collapse
Ok my bad.
Too all newbies like me ( I only flashed just a few kernels and this is my 3rd rom i am flashing) :
Flashing with the latest CM 10.1 kernel and rebooting once (it will stuck on the Galaxy logo since no working rom is present), I rebooted to recovery again and so I managed to install the Asylum rom without a problem.
Learning by doing....

[Q] N7000 CWM Recovery Upgrade to Latest Version

Hi, i have installed SlimBean ROM on my Note and CWM Recovery 6.0.3.2.
I read on forums that for latest CyanogenMod 10.2 i need newer CWM Recovery(ccurrent version 6.0.3.8).
I search how to upgrade to latest CWM Recovery and i found this:
http://forum.xda-developers.com/showthread.php?t=2201860
And here is link for download latest version for N7000:
http://d-h.st/users/philz_touch/?fld_id=25295#files
But i'm confused now, is on that link only CWM Recovery or is that Kernel with CWM?
Can i flash that file through current CWM Recovery (zip file) and get latest CWM Recovery Version?
Or can you tell me how to get latest CWMR Version.
I don't want use Custom ROM's based on Samsung firmware, i prefer CM based Custom ROM's (SlimBean and Bam Andorid),
so that's reason why i'm confused most about upgrading CWMR.
Thanks

You will have to use a kernel which has updated recovery.

please send me xda clockworkmod recovery for galaxy gt-n7000 for omni and tell me how to install

fantasy24 said:
please send me xda clockworkmod recovery for galaxy gt-n7000 for omni and tell me how to install
Click to expand...
Click to collapse
This has been told to you in a lot of threads.

Not able to install 4.4.2 it says error 7 n7000
Hi,
I installed cwm PhilZ-cwm6-XXLTA-ATL-5.15.0-signed recovery from your post which works fine the touch etc. but after when in try to install 4.4.2 in recovery mode, it says (SET_METADATA_RECURSIVE: SOME CHANGES FAILED E: ERROR IN /EMMC/N7000-STABLEv1.zip (STSTUS 7)) and cannot install. the same message for Google app too. is there any thing else i have to do. I have n7000 and i am not very good in gadgets but you know i want to try kitkat.
My phone is not rooted. so in just installed PhilZ-cwm6-XXLTA-ATL-5.15.0-signed. and I have downloaded N7000-STABLEv1 but always get the same message above. I thought just by installing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed i can install any custom rom.
I need help. thanks

rajdeep.sandhu said:
Hi,
I installed cwm PhilZ-cwm6-XXLTA-ATL-5.15.0-signed recovery from your post which works fine the touch etc. but after when in try to install 4.4.2 in recovery mode, it says (SET_METADATA_RECURSIVE: SOME CHANGES FAILED E: ERROR IN /EMMC/N7000-STABLEv1.zip (STSTUS 7)) and cannot install. the same message for Google app too. is there any thing else i have to do. I have n7000 and i am not very good in gadgets but you know i want to try kitkat.
My phone is not rooted. so in just installed PhilZ-cwm6-XXLTA-ATL-5.15.0-signed. and I have downloaded N7000-STABLEv1 but always get the same message above. I thought just by installing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed i can install any custom rom.
I need help. thanks
Click to expand...
Click to collapse
Read how to on flashing kitkat roms... hint: raw kernel

Raw Kernel
nokiamodeln91 said:
Read how to on flashing kitkat roms... hint: raw kernel
Click to expand...
Click to collapse
Hi,
Did installed raw kernel but still getting same error status 7. even enabled toggle signature verification but still.
thanks

rajdeep.sandhu said:
Hi,
Did installed raw kernel but still getting same error status 7. even enabled toggle signature verification but still.
thanks
Click to expand...
Click to collapse
after installing raw kernel , did you reboot recovery or still doing it on touch one?

nokiamodeln91 said:
after installing raw kernel , did you reboot recovery or still doing it on touch one?
Click to expand...
Click to collapse
LOL

Done flashing "PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5" and after reboot to recovery, its only black screen, but I can feel the vibrate when touch the screen. What to do now?

CWM dowload link for Note 1 is not work !!
Hi,
the download link for the CWM Note N7000 is nor working!!
Any help please !!!

links are full of virus and ads but no files ...

Please update the links!
Please update the links when I click on them it gets me to a page but the file is not available! Please update the links!

[Q] Downgrade from cm 11 to cm10.2 problem

hi every one
i have gtI9000 and i was using cm 11 and when i try to go back to cm 10.2 i cant do that
because when i go to flash zip from sdcard them i begin flashing it wont complete installing
and i have an error ends with (status 7) installation aborted
i try many time but no way the same error
and when i re-flash the cm11 it flashed normally with no error
but i like to downgrade please give me a solution
please if u have an idea for fixing this help me

taktoka88 said:
hi every one
i have gtI9000 and i was using cm 11 and when i try to go back to cm 10.2 i cant do that
because when i go to flash zip from sdcard them i begin flashing it wont complete installing
and i have an error ends with (status 7) installation aborted
i try many time but no way the same error
and when i re-flash the cm11 it flashed normally with no error
but i like to downgrade please give me a solution
please if u have an idea for fixing this help me
Click to expand...
Click to collapse
Try to see if the zip file isn't corrupted first
Edit. Also remember that this is not the right place to ask those questions. You are on the Android development thread
Sent from my GT-I9001

Flash semaphore kernel for jb (3.3.0 I think) the reboot to recovery (it's important to so this) then full wipe and flash cm10.2 . this is the only way to go back from cm11 to cm 10.2
Sent from my GT-I9000 using Tapatalk

no one helps?

help me fix status 7 error

hello guys..i am trying to install this firmware d-h.st/9o0 but whenever i do it i get a status 7 error in CWM recovery..i even tried toggle signature verification but still i am getting status 7 error..help?

heartbrake said:
hello guys..i am trying to install this firmware d-h.st/9o0 but whenever i do it i get a status 7 error in CWM recovery..i even tried toggle signature verification but still i am getting status 7 error..help?
Click to expand...
Click to collapse
Flash CM11, and then this. Or if you know, flash just kernel with UKF.
And one thing, you have I9070 or I9070P? If you have I9070P then you need to change tee folder too, and remove some lines from updater script.
First thing that pop up when you search "status 7 error" http://forum.xda-developers.com/showthread.php?t=2302599
And understand rest, that is a ROM, not a firmware. You must be on JellyBean too, can't do it from GB.
Threads of that ROM are here, read:
http://forum.xda-developers.com/showthread.php?t=2632673
http://forum.xda-developers.com/showthread.php?t=2581768

shut_down said:
Flash CM11, and then this. Or if you know, flash just kernel with UKF.
And one thing, you have I9070 or I9070P? If you have I9070P then you need to change tee folder too, and remove some lines from updater script.
First thing that pop up when you search "status 7 error" http://forum.xda-developers.com/showthread.php?t=2302599
And understand rest, that is a ROM, not a firmware. You must be on JellyBean too, can't do it from GB.
Threads of that ROM are here, read:
http://forum.xda-developers.com/showthread.php?t=2632673
http://forum.xda-developers.com/showthread.php?t=2581768
Click to expand...
Click to collapse
i tried flashing aosp rom from cm11 team canjica but then again i got status 7 error in recovery..now i am on stock rom trying to flash aosp rom..what kernel do i have to flash using universal kernel flash ?

heartbrake said:
i tried flashing aosp rom from cm11 team canjica but then again i got status 7 error in recovery..now i am on stock rom trying to flash aosp rom..what kernel do i have to flash using universal kernel flash ?
Click to expand...
Click to collapse
The one from zip of ROM. Remember, after that you will not be able to boot in stock, you must flash CM.
But first, do you have I9070 or I9070P? If you are I9070P you will not be able to flash CM11 anyway.
TeamCanjica does not have AOSP, Team-J made it. You are trying to flash AOSP or CM11, those are two differend ROMs.

shut_down said:
The one from zip of ROM. Remember, after that you will not be able to boot in stock, you must flash CM.
But first, do you have I9070 or I9070P? If you are I9070P you will not be able to flash CM11 anyway.
TeamCanjica does not have AOSP, Team-J made it. You are trying to flash AOSP or CM11, those are two differend ROMs.
Click to expand...
Click to collapse
i am trying to flash AOSP by Jteam..i tried flashing Aosp rom from CM 11 team canjica and also from stock samsung jb rom but i got status 7 error both times

heartbrake said:
i am trying to flash AOSP by Jteam..i tried flashing Aosp rom from CM 11 team canjica and also from stock samsung jb rom but i got status 7 error both times
Click to expand...
Click to collapse
You avoided answer for my question twice. DO YOU HAVE I9070 OR I9070P? If you have I9070P you will always get status 7 error unless you change something in updater script, and you will not have signal unless you change tee folder.

shut_down said:
You avoided answer for my question twice. DO YOU HAVE I9070 OR I9070P? If you have I9070P you will always get status 7 error unless you change something in updater script, and you will not have signal unless you change tee folder.
Click to expand...
Click to collapse
i am sorry man..i forgot to write that..i have GT-i9070 (without NFC)..how to fix status 7 ?

heartbrake said:
i am sorry man..i forgot to write that..i have GT-i9070 (without NFC)..how to fix status 7 ?
Click to expand...
Click to collapse
You have been told on AOSP 4.4 thread, unzipp boot.img from its ZIP and put it to sd card. Install Universla kernel flasher and ES File explorer from Play store and install kernel with Universal kernel flasher. Before that let AOSP zip be on your sd card. Reboot to recovery and install it.
Or just use guide from the thread I already gave you: http://forum.xda-developers.com/showthread.php?t=2302599

[URGENT HELP] Cant flash N7000 ROM LOOKS LIKE DEAD

Hello Guys,
I need a help from you experts please kindly response my Thread.
I do have a N7000 previously it was running 4.1.2 and then i rooted it .
I too dont have a full backup of this 4.1.2 , it was partially backup-ed when i restore it there comes "SYSTEM UI" error while trying to open settings and some apps , so i cant check now USB debugging .
I try to flash the phone from Philz CWM touch 4 recovery every time i get errors [ PhilZ-cwm6-JPLSB-UAE-4.89.4-signed ]
I try these roms : cm-11-20151130-NIGHTLY-n7000 & pa_n7000-5.1-20150628
Error is status 7 i got some posts about it did same inside meta folder on update script but still its throwing same problem .
Here is the snap "https:// www.dropbox.com/s/dgtw2lek5i0ba9o/4.jpg?dl=0 " <<remove 1 space after https:// >> i just had renamed the ROM ZIP name there in snap while i had reZip it after editing updater script
Problem is I have no firmware on my phone and i cant USE it , if i restore my previous 4.1.2 then it throws SYSTEM UI error & i am not being able to flash any custom ROM .
Please , kindly response in detail so that i will understand what should i do to make my phone as Normal or How can i solve flash error
Thanks in advance
Anuj

Status 7 means your kernel can't support your rom because you are installing different android versions (lollipop rom with jellybean kernel for example), you need to do a full wipe from custom recovery before you can install anything.
Try an Odin flash for stock rom, you don't need USB Debugging for it.
Follow the guide here for flashing instructions

AutumQueen92 said:
Status 7 means your kernel can't support your rom because you are installing different android versions (lollipop rom with jellybean kernel for example), you need to do a full wipe from custom recovery before you can install anything.
Try an Odin flash for stock rom, you don't need USB Debugging for it.
Follow the guide here for flashing instructions
Click to expand...
Click to collapse
Mate i had done full wipe from Custom recovery as you told and then i had tried to install but status 7 .

h1dd3n_sn1p3r said:
Mate i had done full wipe from Custom recovery as you told and then i had tried to install but status 7 .
Click to expand...
Click to collapse
Hmmmm turn off your phone, download a stock rom and ODIN flash it. Then follow the instructions from the link I posted (installing from stock) if you want to use a custom rom.

AutumQueen92 said:
Hmmmm turn off your phone, download a stock rom and ODIN flash it. Then follow the instructions from the link I posted (installing from stock) if you want to use a custom rom.
Click to expand...
Click to collapse
Mate sorry newbie here can u please share link for Stock rom and ODIN that will be great help

h1dd3n_sn1p3r said:
Mate sorry newbie here can u please share link for Stock rom and ODIN that will be great help
Click to expand...
Click to collapse
Ahhh, got it. Welcome to the forums!
I used this guide for all my starting out needs. You will need to determine what stock rom you want to install (I suggest Jellybean versions since they don't have a fatal bug) then prepare everything before flashing.
Use this link before Odin flashing if you are interested in increasing your storage space.
And this thread has a list of recoveries for stock roms.
Rule of thumb when flashing is lay out all the stuff you need, determine the steps then proceed.

AutumQueen92 said:
Ahhh, got it. Welcome to the forums!
I used this guide for all my starting out needs. You will need to determine what stock rom you want to install (I suggest Jellybean versions since they don't have a fatal bug) then prepare everything before flashing.
Use this link before Odin flashing if you are interested in increasing your storage space.
And this thread has a list of recoveries for stock roms.
Rule of thumb when flashing is lay out all the stuff you need, determine the steps then proceed.
Click to expand...
Click to collapse
Hmmm ... Thanks mate let me try and i will post the feedback
Currently i am downloading firmware and i will try to flash it with ODIN .
Thanks lot lot help @AutumQueen92

AutumQueen92 said:
Ahhh, got it. Welcome to the forums!
I used this guide for all my starting out needs. You will need to determine what stock rom you want to install (I suggest Jellybean versions since they don't have a fatal bug) then prepare everything before flashing.
Use this link before Odin flashing if you are interested in increasing your storage space.
And this thread has a list of recoveries for stock roms.
Rule of thumb when flashing is lay out all the stuff you need, determine the steps then proceed.
Click to expand...
Click to collapse
Thanks Mate the problem is solved now ...
Actually i did not used ODIN but was about to use it but,
I tryed to flash " Nightowl-cm12-BETA3-n7000-Kernel-only.ZIP " and reboot the recovery ... Then i try to install "cm-11-20151130-NIGHTLY-n7000" ROM and now that worked perfectly .
Now Phone is running CM11 KITKAT 4.4.4 but still i forget to flash Gapps . Hope now i can flash Gapp ..
Thank you for all your assists :good::good::good: