Flashed Slim Rom... phone not booting... back to stock recovery... can't dlash ANYTHING..???!!? When connect to PC.. it recognise it... but Kies neither ODIN finds it... Returning phone to shop next week... but any you guys know what to do.. Had the phone just 3 days... damn you Santa...
Sent from my GT-I9070 using Tapatalk
Did you wipe data/factory reset, wipe cache and dalvik-cache and eventually the system partition too? If you didn't, then of course the phone wouldn't boot.
Sent from my GT-I8190 MaclawStudio CM 11 using Tapatalk
if your phone its bricked you wont be able to boot to anything
if you use windows 8 the phone won't be recongized untill you disable dsv but if you're in win 7- just install the drivers
Related
Hi friends
I asking for help because yesterday i flash AOKP JB-4 in to my galaxy note N7000 but something went wrong in the middle of the rom install the screen put black and since then the phone is not working.
I'm going to explain all the process i made to flash the new rom
1. I install Clockwork Recovery in the galaxy note
2. I did a nandroid
3. I flash the rom with rom manager v5.0.2.1
4. The phone enter recovery wipe delvik and cache and started to install the rom
5. In the middle of the process the phone went black. is not the battery because it was 80% full
I have tried to enter recovery mode, download mode, use odin (but the PC dosent recognized the phone) i have also use [Linux] ModeDetect USBID Detector but this method is not compatible with the n7000
The phone was already rooted but the person who rooted didn't used odin so i don't now if that has something to do with the problem i have.
So is there anyone that can help me to safe the phone or is totally brick
Probably bricked since you didnt follow the warnings and instructions. There are methods in here somewhere were you might be able to partially revive the phone but loose some storage I believe.
Skickat från min GT-N7100 via Tapatalk 2
Happend to me to. Had to sent it to repair nothing made the phone to come on. They had to replace the motherboard in the phone.
Sent from my GT-N7000 using xda app-developers app
dante501 said:
Happend to me to. Had to sent it to repair nothing made the phone to come on. They had to replace the motherboard in the phone.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You can try using PC odin in download mode to try installing a stock rom. If post update the phone is stuck in boot it probably means your phone is bricked.
Take it to samsung and if you are under warranty they will replace the mother board.
Happened to me. One of those unlucky ones who did factory wipe before the news spread out
Well he said I can't turn it so no download or battery charging mode just nothing. Black screen dead. Like I said when I flash a Rom that what happen to me and nothing no jig nothing made it possible to even turn on make the screen light up other then a motherboard exchange.
Sent from my GT-N7000 using xda app-developers app
Hey, a week ago i bricked my tab by flashing a bad rom as an update on another rom. (oakp to paranoind).
I red the guid and stuff, but im not shure if its an soft or hard brick.
When trying to charge it shows the battery but it won't charge, when i power it on it is stuck on the "galaxy tab samsung" screen, i can bring it to download mode, and odin won't recognise my tab.
Have you re-installed the USB driver?
You may need a clean machine if you don't know how to clean up the USB driver.
priyana said:
Have you re-installed the USB driver?
You may need a clean machine if you don't know how to clean up the USB driver.
Click to expand...
Click to collapse
i allready did that, any other suggestions?
Turn off your tab, fully charge it for 3 to 4 hours.
Open it in download mode, and yes follow the guy's instruction to reinstall your drivers.
Wait first for the computer to read, recognize and install the missing drivers. After it pops a success notification, open odin.
Make sure you have downloaded the stock firmware.
Flash the firmware file. (pda, check reboot and f. Reset time)
It should boot normally.
If you are using cwm recovery, try clearing dalvik and cache partition before flashing the new rom.
Sent from my GT-P3110 using xda premium
Hey guys.
I got here a Samsung Galaxy Ace S5830 (without i) and this phone doesn't turn on. Sometimes I'm getting into the "Emergency dload mode" but the usual download mode or recovery doesn't work. In december 2012 i flashed CM7 on this phone, after that I did nothing which could brick the phone. If I'm trying to plug it into my computer to odin that device the computer doesn't recognize the phone ("USB-Device not recognized", so it's not a driver problem, the whole device isn't recognized). If I turn the phone into that emergency dload mode by pressing volume+home+power this mode disappears after a few seconds, sometimes after 3, sometimes after 6, sometimes after 10 seconds. Can it be the battery? I already charged the phone half an hour. Do you think I can reanimate that phone? Or you think i need to jtag it?
Thanks in advance for any help!
Hi skayable,
You could read this hubix's tutorial http://forum.xda-developers.com/showthread.php?t=1034145
Good luck.
Sent from my GT-S5830 with AceOne 2.1
But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app
skayable said:
But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
Hi skayable,
You could try installing the drivers, again, just in case.
Good luck.
Sent from my GT-S5830 with AceOne 2.1
Did you take the battery out before pressing all the buttons? I've bricked mine a few times now (noob) and have managed to get a connection with Odin each time. Sometimes takes a few attempts, poss to do with my hands being too small to hold all buttons and put battery back in. One time, Odin took several minutes to find the device.
It's probably not a good idea to be using a flat battery. And do try re-installing the Windows standard drivers. Don't give up! If a noob can do it ...
So I sent that phone in service. They said, that the software was modified and the warranty is void. I said, they shouldn't repair it and send it right back. When I got the phone back, it worked! They flashed a new bootloader, found out that it's rooted and sent me back. Good method to get it repaired
That's so funny.
Help with my galaxy ace bricked
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
jhay0017 said:
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
Click to expand...
Click to collapse
In case of bootloop use odin and flash a stock rom.
Galaxy Ace 2 18160
Hi,
My son had this phone and rooted it, bricked it and dumped it. I would like to see if I can make it work again. It is hard bricked so the three button combo doesn't work. Can this be phone get working again?
My note was working fine on a stock rooted 4.1.2 rom and root kernel with Philz touch 5 recovery until this morning it suddenly froze. I left it for a minute to see if it would do anything, but it stayed frozen. I took the battery out and put it back in. It showed the boot logo, moved onto the "Samsung" animated screen but then froze right at the end of this screen, and started booting again and continued to do this forever.
I've tried formatting everything and flashing new kernels and roms in the recovery to no avail.
I can still boot into download mode and recovery fortunately.
I don't need root or anything, I just want a working phone as fast as possible. I don't need to keep any of my files either.
Any ideas on what I can do?
Cheers
Try clearing cache and dalvik cache first, this will preserve all your data. If that doesn't work, do a factory wipe from recovery, this will however result in all your data being lost. Of it still doesn't work, then I suggest a full reflash of a stock ROM using Odin.
Sent from my GT-N7000 using xda app-developers app
If i am correct u should br on a loop.... saved myself from that by:
1)install odin in ur pc
2)put ur phone in download mode (power+volume down+home)
3)press volume up
4)once animation comes up connect ur phone to odin.it will automatically detect ur device.
5)put the proper kernels or md5 files in the correct colums
6) follow wat odin sez after that. Ur device wud be working fine
Sent from my GT-N7000 using XDA-FORUM, powered by appyet.com
Atomix86 said:
Try clearing cache and dalvik cache first, this will preserve all your data. If that doesn't work, do a factory wipe from recovery, this will however result in all your data being lost. Of it still doesn't work, then I suggest a full reflash of a stock ROM using Odin.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply; unfortunately already tried AOTA to no avail
I suspect that the issue is to do with bad blocks in my phone's flash memory, it always fails right at the same place on "hidden.img".
I could try partitioning the memory so that it ignores the bad blocks in that area, but I'm not that good at that stuff
Does anyone have a PIT file for this please?
Cheers,
Luke
Hi all,
Recently my Nexus 4 broke, and I had to borrow an old N7000 from a friend. It was running 4.2.2 when I got it. I downloaded the correct firmware (DDLSC) for rooting it & flashed it through ODIN. It rooted perfectly & I was able to install the latest Philz recovery through the CWM. Through Philz, I was able to install the Resurrection Remix ROM (CM12) & Forest Kernel perfectly. I used it for a few days and then I also updated it 2-3 times. A simple flash was causing FC's so I had to do a full wipe everytime. But everytime I booted into recovery, It opened up the CWM instead of Philz. So, I had to install latest Philz first, then reboot recovery & install the ROM.
Last week, I decided to change the ROM to Nightowl BETA 5 (which is also CM12). I used the same procedure, full wipe & install. Most of the time, it would boot into CWM by default. I don't know why Philz wasn't getting installed permanently. Sometimes, it broke the root & stuck at bootloop. So, I had to install CWM again. And again. The custom binary count had already reached 3.
Nightowl BETA 5 also worked correctly. after a few days, I downloaded BETA 6 & tried to install it. Same way - full wipe & flash. It flashed & booted once. But the battery went dead after a few hours & I connected it to the charger & tried to boot it but it didnt boot at all. I have been trying to get it to boot for a few days now but nothing.
It shows the charger sign only when connected (either to laptop or charger, no boot, no connection). While connected, I tried to get download mode. It went upto the warning sign, where I have to press volume Up to continue. After pressing volume Up, no download mode, it goes back to the charger.
I bought a USB jig yesterday & tried to get download mode using the instructions from this thread:
http://forum.xda-developers.com/showthread.php?t=2084222
During all the steps, I get only a black screen. Nothing else.
Now it's only in the charger mode & no boot, no recovery, no download mode(except warning). Any & all help to get me out of this situation will be appreciated. I have to return it to the friend I borrowed it from ASAP & in working condition.
Why do you flash a borrowed phone? [emoji32]
Guess you have to pay for the phone then... STUPID!
Gesendet von meinem GT-N7000 mit Tapatalk
JulGer01 said:
Why do you flash a borrowed phone? [emoji32]
Guess you have to pay for the phone then... STUPID!
Gesendet von meinem GT-N7000 mit Tapatalk
Click to expand...
Click to collapse
Thank you for your valuable response........umm.......I followed your instructions......the phone still doesnt work at all.
Your phone bricked you need to change inside something called emmc chip
Sent from my GT-N7000 using XDA Free mobile app
Flash forest kernel again.
Sent from my C6603 using XDA Free mobile app
zikay said:
Flash forest kernel again.
Sent from my C6603 using XDA Free mobile app
Click to expand...
Click to collapse
How can he do that when he can't open recovery or download mode.