Hi,
I have installed ViperOne, latest version on my HTC One.
Everything works according to plan, when I install the ViperOne_OTA_310_RC2 through TWRP it says everything was installed correctly.
I reboot according to instructions, but the phone freezes at the second start-up screen. I already tried to install ViperOne completely, but still not working. I can't seem to get the phone working unless I install the ROM again, or put back-up back on.
Hope anybody can direct me towards a solution. I already searched the forums but nobody seems to have the same problem. I guess I am doing something wrong.
Thx,
Dennis
Maybe it's a bit stupid question but how long did you wait on that second boot screen? It take a bit of time before it pops into the user interface.
I can also suggest to double check the md5 as the file can be corrupted. ( bad download )
Sent from my HTC One using xda app-developers app
Thanks for your reply.
First time i waited a few minutes.
I thought i was to quick, so tried again and waited for like 10 minutes.
I can try to download again, but i guess the file is not corrupt because the installation said it was succesfull.
Ill report back.
tried it again with a new download, same problem.
startup screen is still there after 10 minutes
Now that's weird. i installed viperone again and when it was finished booting i got the message that there was an update.
downloaded latest viperone and installed it.
still weird, but it works atm.
I'm happy for you mate. Always download the latest one and check md5 before you flash it. Also make sure your base firmware is up to date as well, ROM will not update it and it can cause that kind of problems if it's too old.
Sent from my HTC One using xda app-developers app
Related
Tried to update fine it completed then rebooted then said "Did not install" but it says I'm using JH7 now. But in no way is the GPS any better...
Exactly the same experience here. I will add that I also did not get the new office application, have not checked for the updated YouTube.
Yes, I had no troubles getting the update. See the following:
TheRealXenu said:
Stock rom with update is ready here http://www.megaupload.com/?d=RZXMUXY4
Click to expand...
Click to collapse
designgears said:
Hey guys, I see some of you are bricking or not being able to update.
You can use this to flash to I897UCJH7 OTA.
Use Clockwork recovery to flash it...
Cognition is currently being rebuilt on top of this, deodexed and all that fun stuff.
This flashes the system folder, kernel, and modem.
Download:
http://www.ponack.net/designgears/JH7_OTA.zip
Let me know how the GPS works for you guys!! I have gotten it to lock in my basement!!
Click to expand...
Click to collapse
These have been was posted for awhile now. Use clockwork recovery to flash either of them.
Yes, I was rooted, but I had just done a factory restore, it returned it to factory state, although I still had the superuser app in the app drawer. I then immediately downloaded the OTA update and it installed fine. I had the new youtube and all. So I then downloaded ROM Manager and tried to do a restore so I could get all my apps back, but that F**ked it all up! I have since had to do a odin one click restore and now I cant get the update to go past 50%, so i'm SOL now.
I'm rooted using the stock ROM and did the update yesterday and it installed 100% with no problems. It did hang at 50% for around 30 seconds or more maybe.
Im rooted with all att bloatware removed. It failed at 50%, rebooted and said the update failed. However gps absolutely works now, so apparently whatever it did managed to fix at least the gps. It said jh7 in system info. Battery life still seems to suck though. I cant wait for froyo to screw everything up 1000 times worse than this.
Sent from my SAMSUNG-SGH-I897 using XDA App
I was rooted with the bloatware removed and with sideloaded i found a new Update.zip that removed the root and the update will download but just says "Preparing". Then says "Update is failed" and reboots says it did not complete.
Im rooted. While I didnt get the extra office app or whatnot my GPS is working at least 50 times better. I am locked onto 8 satellites within 5-8 seconds indoors. (using gps test) Going outside only makes my reception better.
When I initially purchased my captivate it was shakey at best. My OTA update said it failed but im showing JH7 and my GPS is now working well.
like everyone else. I'm rooted with stock rom and the update did not succeed. I'm hoping that when 2.2 is released, it replaces everything regardless of being rooted or not, so that I can start from a clean slate.
i tried to return to stock via odin one-click but that did not allow the update to run.
Rooted, unlocked, and successful update. Via EDGE, no less.
did anyone get it to succeed that left the bloatware removed during the update process?
Just updated got to 100 and failed. It shows JH7 even though I got a notification saying update failed. Now youtube widget is dead and software update doesnt even open anymore.
Update media scanner was running for 20 min thats why nthg was opening. If we flash the update on the web. Would that whipe everythg.
Sent from my SAMSUNG-SGH-I897 using XDA App
Success for me. Just did the basic root. Still have bloat and no lag fix. Something to consider, I did a reset the day before that took off side loading.
Took about a min on 3g to download, hung at 50 and 92 for about 10 seconds.
From a phone on an app
But u were still rooted?
There seems to be no pattern to this madness. Ppl rooted have failed and succeeded same w unrooted ppl. Lets hope the XDA devs figure out what the real problem is. Because CrapTT & Shamesung cant
Sent from my SAMSUNG-SGH-I897 using XDA App
Leo_ee said:
But u were still rooted?
There seems to be no pattern to this madness. Ppl rooted have failed and succeeded same w unrooted ppl. Lets hope the XDA devs figure out what the real problem is. Because CrapTT & Shamesung cant
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yeah, still rooted. There's a survey going on to find out what's going on in another thread. All the posts I've seen with un rooted phones is people canceling the process.
From a phone on an app
DKirk said:
Exactly the same experience here. I will add that I also did not get the new office application, have not checked for the updated YouTube.
Click to expand...
Click to collapse
Visit the market place search for quick office. See if there is a special version there called Quick office for captivate. There was for me. FYI mine said it failed but the gps is now scary fast, it was always good for me. About 30 seconds. But I just got a no error lock inside my apartment build in 3 seconds.
i was rooted and still am. took oclf off and update succesfull. gonna put oclf back on. is there any dangers of reinstalling oclf again? this would be the 3rd time.
Mine was rooted and lag fixed.
Sent from my SAMSUNG-SGH-I897 using XDA App
Okinz87 said:
I'm rooted using the stock ROM and did the update yesterday and it installed 100% with no problems. It did hang at 50% for around 30 seconds or more maybe.
Click to expand...
Click to collapse
My experience also.
nyydynasty said:
like everyone else. I'm rooted with stock rom and the update did not succeed. I'm hoping that when 2.2 is released, it replaces everything regardless of being rooted or not, so that I can start from a clean slate.
Click to expand...
Click to collapse
Same situation here.
I don't think people should be getting their hopes up for a 2.2 update anytime soon though. Something just tells me it might be a while if it ever even happens, but that just my speculation.
I Have created a CM7 rom for rooted 621 and it should a lot easier to use now that I have tested personally and everything works as it should no need for gapps as it has vendor.apk in it and it will update to playstore.
Flashing Instructions
1:Back-up always
2:full wipe
3:install rom via CWR or bootstrap
4:Gapps arent needed but you may flash just to be comfortable
5: reboot
6: leave me feedback
7: enjoy
Downloads
Rom: http://www.4shared.com/zip/PvWul1cI/KiladarsCM7GBKERNEL.html?
Gapps: http://www.4shared.com/zip/tDblkDjI/gapps-gb-20110828-signed.html?
Known Bugs:
Settings does not open working on it right now.
let me know what you guys think.
change log:
Settings updated should work now
I Have finally fixed the settings
will this work on gb.605?
Sent from my DROID RAZR using xda premium
I believe it should. I only have my 621. Flash at your own risk.
Sent from my DROIDX using xda app-developers app
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
BADDINOROX99 said:
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Kiladar said:
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Click to expand...
Click to collapse
I can't flash it yet because my computer is in the repair shop and I never do anything risky with my phones unless my computer is nearby
Sent from my DROID RAZR using xda premium
Okay. I wonder if anyone has tried this yet.
Sent from my DROIDX using xda app-developers app
I hope so it looks promising
Sent from my DROID RAZR using xda premium
Well Im very new at modding Droid X, but I have an important question...
Is the hdmi fully working?
Or is there any rom which make it work as it should?
I mean something like a mirror.
Thanks!
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Finally, does this works for any other gb kernel besides .621?
Anybody please tell us!
Nope, but maybe yes
BADDINOROX99 said:
will this work on gb.605?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
And thank your for the review I've been waiting for a review like that I've created a couple roms and no one has have gave me so much input
Sent from my SGH-i917 using XDA Windows Phone 7 App
No prob Kiladar. I think if someone is going to comment on someones work, they should at least review it and be as informative as possible. It makes it easier
on the devs to look at potential probs/fixes too.
Oh yea, I also got to looking into your system/app folder in your zip. The vending.apk is Not in there, which i would say is why I had to flash the gapps. Just wanted you to know.
Also there is no "boot.img" (which is kernel right?) in the new dwnload.
Right, I will update OP saying to flash gapps rather then say not needed
Sent from my SGH-i917 using XDA Windows Phone 7 App
Beanerman said:
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Click to expand...
Click to collapse
wifi works just fine with it, and I agree bout the updated superuser since you cant uninstall the one you have with it which means you also cant update to the new superuser because they are different volumes but over all nice ROM.:good:
thelangosta said:
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
Click to expand...
Click to collapse
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Other issues with phone
mbm262 said:
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Click to expand...
Click to collapse
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
thelangosta said:
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
Click to expand...
Click to collapse
I hear ya, I had the same prob with sd card so i formatted mine as well, problem was still there though. whenever i tried to install a rom from sd card via rom manager the problem was i kept getting the message saying waiting for sd cart to mount then it would say error bla bla bla sending log file to cwm ect ect ect.... i dont know exactally how i fixed that, all i know is i installed another rom, like cm7 or cm9 for instance and after that whenever i went to back up rom it worked fine ever since.... maybe something flashes over correcting the sd card problem when you install a rom... I know rom manager checks to verify the marker on sd card and thats what your problem is I believe.
Try doing this, try installing a rom cm7/cm9 without making a backup (i know you could lose everything if it fails but its the only way i know that fixed mine) after you have installed cm7/9 go to rom manager and hit the Backup Current Rom it should reboot you to cwm recovery and make an auto backup, if it does this without throwing up the waiting for sd card to mount error stuff and it runs the backup program and then reboots you it should fix your sd card problems.....
Review this rom
this is by far a ROM with the least lag by far i tried liquid ICS and plenty others don't know what it is but the lag is really minimal runs really smooth i only have this for like 3 hours but will update soon
pls hit thanks if i helped
I rooted and installed a custom when I bought the phone when it just came out, rom everything was working well, got bored wanted to upgrade to that kitkat so i went on here and thought that bulletproof room looked kinda neat tried to install it and for whatever reason it failed. so I tried wiping everything and went into recovery mode and tried installing it via sideload after it was done it said it had no OS installed. I've tried to wipe again and tried installing android revolution thinking it was just the rom, it freezes at the installation screen I read around the forums and nothing seems to help. So i came here asking for help. I know you guys are geniuses, help a brother out!
Tried again
So I tried using sideload again, successfully installed bulletproof ROM, It still says No Os installed when I go to reboot it after the installation.
Using hasoon2000's aio tookit to try to flash factory ruu, but no matter what i tried the device can't be recognized, tried uninstalling the device and installing the htc drivers, Also tried letting windows update look for drivers.
:/ 70 views and no tips eh.
nibblemynutz said:
:/ 70 views and no tips eh.
Click to expand...
Click to collapse
Nothing worked for me either until I tried using OMJ's RUU. Don't ask me why... It just worked. Follow his instructions and you should be set. Just look for his RUU post.
Sent from my HTCONE using xda app-developers app
nibblemynutz said:
I rooted and installed a custom when I bought the phone when it just came out, rom everything was working well, got bored wanted to upgrade to that kitkat so i went on here and thought that bulletproof room looked kinda neat tried to install it and for whatever reason it failed. so I tried wiping everything and went into recovery mode and tried installing it via sideload after it was done it said it had no OS installed. I've tried to wipe again and tried installing android revolution thinking it was just the rom, it freezes at the installation screen I read around the forums and nothing seems to help. So i came here asking for help. I know you guys are geniuses, help a brother out!
Click to expand...
Click to collapse
i didn't know there was a bullet proof rom, i know uf a bullet proof kernel, anyway either one is not for the sprint phone, that's what caused your problems, only way to fix is to RUU, and don't flash roms from any other forum unless it STATES IT HAS SPRINT SUPPORT.
lanewhit said:
Nothing worked for me either until I tried using OMJ's RUU. Don't ask me why... It just worked. Follow his instructions and you should be set. Just look for his RUU post.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Thanks, i'll go ahead and try that.
Still didn't work after I locked and did the ruu through the cmd prompt, so I tried using the AIO also didn't work, got frustrated and drove an hour to a sprint store that had technicians. the store around me don't have "technicians". it took him about 10 mins. My htc one is fully functional again.
Bet all he did was run the 4.3 RUU from HTC....I personally would have tried that. The other thing that is a possibility is the phone you got back is not your old phone.
can someone help me asap please. about an hour ago i was using my phone normally, locked the screen with the button, then a couple minutes later tried to unlock the screen to check my browser but it wouldnt turn on. it was like it turned off. the only way to get it back on was by doing the power plus vol down to go into bootloader. i did that and rebooted everything worked normally on the reboot. i sent a text and locked it. a few minutes later i went to unlock it again to check something but it wouldnt turn on again. this time on the reboot nothing worked. it would reboot and just sit on the screen where it says Viper ROM wtih the red V flashing. i went into recovery and reflashed the rom, now it loaded up, did the "updating apps "x out of xxx" and after that it went to "android is upgrading...starting apps" with the spinning circle on the left. it has been stuck on this screen for about 5 minutes now and the circle is still spinning. what should i do?
edit: ive been on 1.1.0 viper rom for months now, since it first came out and havent had problem up until today. havent messed with any settings or anything. i really am trying to avoid doing a system wipe cause i have important texts i cant lose.
This would be better suited and more likely to be adressed in Q/A or better yet the Viper Rom thread.
Sent from my HTCONE using XDA Premium 4 mobile app
drlzanej said:
This would be better suited and more likely to be adressed in Q/A or better yet the Viper Rom thread.
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry about that, i posted in both those places but got no responses so i tried here. really trying to find some help asap cause i havent been able to use my phone for a few hours now
Greetings,
I moved this to Q&A and I'll be deleting the duplicate.
Thanks,
BD619
^thank you sir!
can anyone help me with an answer to this question. if i backup the data portion in recovery mode, do the wipe in team win recovery, then reflash the rom. can i restore just hte data only and have my text messages back since it would be the same rom i was running before?
i am having the same issue again after i factory reseted and reinstalled the rom. can anyone help?
1st time poster, long time info seeker.
First things first, thank you to all those who have made it possible to use my HP Touchpad with Android. I have 2 of them one which has ev_tenderloin-nightly-2014.11.22.zip and the other cm 11-20141020 unofficial. Now as far as updating goes usually the Ev tablet alerts me when there are new updates and I download them. For whatever reason I have been unable to install anything past the 2014.11.22 rom. It hasnt been an issue. When the update gave me errors I would restart go back in and reinstall the 2014.11.22 rom and go back to my usual. I was cleaning up my device and accidentally deleted the only rom that worked and now when I try to find and download it again it isnt around to be found. I had been using the ev updater and when I checked the website it doesnt seem to be available there either. i was wondering if anyone has that rom available or know where I can find it to download.
any help would be appreciated.
BABAFEMI said:
1st time poster, long time info seeker.
First things first, thank you to all those who have made it possible to use my HP Touchpad with Android. I have 2 of them one which has ev_tenderloin-nightly-2014.11.22.zip and the other cm 11-20141020 unofficial. Now as far as updating goes usually the Ev tablet alerts me when there are new updates and I download them. For whatever reason I have been unable to install anything past the 2014.11.22 rom. It hasnt been an issue. When the update gave me errors I would restart go back in and reinstall the 2014.11.22 rom and go back to my usual. I was cleaning up my device and accidentally deleted the only rom that worked and now when I try to find and download it again it isnt around to be found. I had been using the ev updater and when I checked the website it doesnt seem to be available there either. i was wondering if anyone has that rom available or know where I can find it to download.
any help would be appreciated.
Click to expand...
Click to collapse
We have moved over to lollipop so you need to set the device up for lollipop.
Sent from my SCH-I545 using XDA Free mobile app
flintman said:
We have moved over to lollipop so you need to set the device up for lollipop.
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
TYVM for your quick response... Figured that may be the case and was just doing my due diligence and was reading up on it right now... again ty and the rest of the developers for making Android and my HP Touchpad all it is today.