Related
I Have created a CM7 rom for rooted 621 and it should a lot easier to use now that I have tested personally and everything works as it should no need for gapps as it has vendor.apk in it and it will update to playstore.
Flashing Instructions
1:Back-up always
2:full wipe
3:install rom via CWR or bootstrap
4:Gapps arent needed but you may flash just to be comfortable
5: reboot
6: leave me feedback
7: enjoy
Downloads
Rom: http://www.4shared.com/zip/PvWul1cI/KiladarsCM7GBKERNEL.html?
Gapps: http://www.4shared.com/zip/tDblkDjI/gapps-gb-20110828-signed.html?
Known Bugs:
Settings does not open working on it right now.
let me know what you guys think.
change log:
Settings updated should work now
I Have finally fixed the settings
will this work on gb.605?
Sent from my DROID RAZR using xda premium
I believe it should. I only have my 621. Flash at your own risk.
Sent from my DROIDX using xda app-developers app
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
BADDINOROX99 said:
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Kiladar said:
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Click to expand...
Click to collapse
I can't flash it yet because my computer is in the repair shop and I never do anything risky with my phones unless my computer is nearby
Sent from my DROID RAZR using xda premium
Okay. I wonder if anyone has tried this yet.
Sent from my DROIDX using xda app-developers app
I hope so it looks promising
Sent from my DROID RAZR using xda premium
Well Im very new at modding Droid X, but I have an important question...
Is the hdmi fully working?
Or is there any rom which make it work as it should?
I mean something like a mirror.
Thanks!
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Finally, does this works for any other gb kernel besides .621?
Anybody please tell us!
Nope, but maybe yes
BADDINOROX99 said:
will this work on gb.605?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
And thank your for the review I've been waiting for a review like that I've created a couple roms and no one has have gave me so much input
Sent from my SGH-i917 using XDA Windows Phone 7 App
No prob Kiladar. I think if someone is going to comment on someones work, they should at least review it and be as informative as possible. It makes it easier
on the devs to look at potential probs/fixes too.
Oh yea, I also got to looking into your system/app folder in your zip. The vending.apk is Not in there, which i would say is why I had to flash the gapps. Just wanted you to know.
Also there is no "boot.img" (which is kernel right?) in the new dwnload.
Right, I will update OP saying to flash gapps rather then say not needed
Sent from my SGH-i917 using XDA Windows Phone 7 App
Beanerman said:
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Click to expand...
Click to collapse
wifi works just fine with it, and I agree bout the updated superuser since you cant uninstall the one you have with it which means you also cant update to the new superuser because they are different volumes but over all nice ROM.:good:
thelangosta said:
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
Click to expand...
Click to collapse
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Other issues with phone
mbm262 said:
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Click to expand...
Click to collapse
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
thelangosta said:
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
Click to expand...
Click to collapse
I hear ya, I had the same prob with sd card so i formatted mine as well, problem was still there though. whenever i tried to install a rom from sd card via rom manager the problem was i kept getting the message saying waiting for sd cart to mount then it would say error bla bla bla sending log file to cwm ect ect ect.... i dont know exactally how i fixed that, all i know is i installed another rom, like cm7 or cm9 for instance and after that whenever i went to back up rom it worked fine ever since.... maybe something flashes over correcting the sd card problem when you install a rom... I know rom manager checks to verify the marker on sd card and thats what your problem is I believe.
Try doing this, try installing a rom cm7/cm9 without making a backup (i know you could lose everything if it fails but its the only way i know that fixed mine) after you have installed cm7/9 go to rom manager and hit the Backup Current Rom it should reboot you to cwm recovery and make an auto backup, if it does this without throwing up the waiting for sd card to mount error stuff and it runs the backup program and then reboots you it should fix your sd card problems.....
Review this rom
this is by far a ROM with the least lag by far i tried liquid ICS and plenty others don't know what it is but the lag is really minimal runs really smooth i only have this for like 3 hours but will update soon
pls hit thanks if i helped
Hey everybody, new to the forum.. glad to be here!
Here's the deal.. I have googled and searched xda as well as other forums and can not seem to find the answer I am looking for,,
Here's what happened...
I was running 2.3.6. Used CWM and root zip to root my phone. That all worked fine, but next, like a dummy, I went through and started deleting stock apps and accidentally deleted my Live Wallpapers and Wallpapers. So, I used an app (I feel bad for not being able to remember which one, but in the midst of panic I went into last night, it slipped my mind) to unroot it.
When I did this, the stock apps didn't return. I'm guessing because I didn't back them up. So, next I tried to install Flash2stock, thinking that would get me back to where I needed to be. Well, somehow in the menu, I thought it would be a good idea to wipe the rom and everything else.
So, now when I turn my phone on it will boot to "Samsung Galaxt Exhibit 4g" screen and then just boot loop.
In my googling yesterday, I found a page about using ODIN and how I could use it to flash back to stock with my phone. I tried and tried, but Odin will not recognize my phone. I have the correct drivers installed (as far as I can tell) but no luck..
So, I'm here to ask you root gurus about solutions. Are there other methods to restoring my stock rom and getting my phone working again?
or am I just missing something with the Odin stuff?
Please, please, please help! I thank you so much in advance. Not having a phone sucks!
Try uninstalling the drivers and re-installing the ones from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
PS: Have you put your phone into download mode before connecting it to your computer? Volume down and power should get you there.
meekrawb said:
Try uninstalling the drivers and re-installing the ones from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
PS: Have you put your phone into download mode before connecting it to your computer? Volume down and power should get you there.
Click to expand...
Click to collapse
Thank you for sending me that link. I did not know that I needed a different driver for download mode.. unfortunately both links provided in the wiki page do not work. I am going to google it again and see if I can find them somewhere else.. or if you know of another link that would rule.
And yes I did. I believe I did so correctly. Once the screen with the yellow "!" came up, I pressed the Vol up to get into download mode, then I plugged in my phone, then started Odin. Odin showed the message "Please connect Phone".
I'm running Windows 7 32-bit. And my computer thinks the other driver is called "mtp driver". This is draining, but I am determined to not let a phone beat me
I have done this before, since you have cwm on your phone, all you need to do is download the flash2stock zip to your external sd. Flash via cwm and wait for it to finish, then reboot and let your phone sit for roughly 10 mins. You should be good after that
Sent from my SGH-T679 using xda app-developers app
Thanks again guys. I finally found the srivers I needed and got Odin ti recorgnize my phone.
The method with the sd card would have worked perfectly, but i do not have an sd card reader for my computer. Will definitely be investing in one soon!
When Odin set this guy back up, it install 2.3.5 bavk on here, which is fine because I plan to root and customize anyway.
Any suggestions for kernels/roms i should check out? I have done minimal looking at the ones for my drvice, but intend to.
My main concern is functionality. I need my camera and other apps to work. If they dont, then to me it defeats the purpose.
Also, I do remember the joy os rom that looks like an iphone-ish layout.. Has anybody made one that looks like a windows phone? Ive used the launchers in the past, but it would be cool if there was a rom out there.
Thanks again yall!
Sent from my SGH-T679 using xda app-developers app
ts0rock said:
Thanks again guys. I finally found the srivers I needed and got Odin ti recorgnize my phone.
The method with the sd card would have worked perfectly, but i do not have an sd card reader for my computer. Will definitely be investing in one soon!
When Odin set this guy back up, it install 2.3.5 bavk on here, which is fine because I plan to root and customize anyway.
Any suggestions for kernels/roms i should check out? I have done minimal looking at the ones for my drvice, but intend to.
My main concern is functionality. I need my camera and other apps to work. If they dont, then to me it defeats the purpose.
Also, I do remember the joy os rom that looks like an iphone-ish layout.. Has anybody made one that looks like a windows phone? Ive used the launchers in the past, but it would be cool if there was a rom out there.
Thanks again yall!
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
If you want a windows phone look you could get Cyanogenmod and install a windows phone theme. Then just get Launcher 8. The theme is pretty extensive and does the whole system. Then just get apps like metro messaging to replicate core apps. Also there is a Windows phone keyboard out there somewhere.
Sent from my Galaxy Exhibit 4G
Hi all, I have looked all over the place, I need help.
Here are my Current "About Device"
Hardware Version: I800.0.3
Model Number: SCH-I800
Firmware: 2.3.5
Baseband Version S:I800.0.3V.E104
Kernel Version: 2.6.35.7-dsb9938.VZW.GTab.E104.1.1.2
I have looked at the "back to stock" threads, multiple DL links are no longer available.
I had rooted, and Flashed a "Cube" ROM quite some time ago. A while after that I messed something up with the built in "overclocking" type app. Set it to the side and kind of forgot about it. Fast forward to know, I would like to get it working for my son to use, but there are a few issues that keep us from using it. I kept getting all sorts of random force closes, so I was able to get in recovery, and tried to wipe everything. This somewhat worked for a while, but now I am getting a force close from Facebook (which isn't installed, and I have narrowed it down to a contact synching issue) and I keep getting a popup for an OTA system update. I have tried to do the update, but I think the recovery is keeping it from completing.
Long story short, I know this device is a bit older, but where should I start from? I am ok with a fresh, wipe everything start. Not looking for a crazy ROM, but just a everything works ROM. I am ok with GB, ICS, etc, I just want it to be fully functioning. I plan on adding the tablet on my account so I can stop tethering for my son to use it. This has been the only device I have ever needed to ask for help, I am just not so used to the ODIN type stuff.
Thanks in advance.
I tried to do a reset, and wipe from CW recovery. Then restore, it has been stuck on the black with white Samsung screen for about 10 minutes. Don't know what else to do right now.
Sent from my SCH-I605 using xda premium
http://forum.xda-developers.com/showthread.php?p=42913151
Sent from my GT-N7100 using xda app-developers app
priyana said:
http://forum.xda-developers.com/showthread.php?p=42913151
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Much appreciated, long/slow download, but hope it works.
Wish I could get into recovery, I would just flash from the card.
Sent from my SCH-I605 using xda premium
There's a very new thread that should help you get back to stock. http://forum.xda-developers.com/showthread.php?t=2383201
As far as what to put on it, I highly recommend this CM10.1 ROM. It runs very smoothly, but if you want to activate data, I think you have to go back a bit for a working kernel. http://forum.xda-developers.com/showthread.php?t=2043421 The CDMA version is the p1c.
I don't know if you have come across this yet, but unlike any device I had flashed before, the GTab recovery has to be flashed with a corresponding kernel. You can't just flash the recovery to get into recovery.
I was so excited when I saw this ROM posted! I got it all working wonderfully, until I restarted my phone, and it wouldn't get past the Exhibit screen. Pulled the battery, did another wipe and re-flashed the ROM, got it going again, but the same problem upon restart.
Any ideas? Anything I could have missed?
violentmind said:
I was so excited when I saw this ROM posted! I got it all working wonderfully, until I restarted my phone, and it wouldn't get past the Exhibit screen. Pulled the battery, did another wipe and re-flashed the ROM, got it going again, but the same problem upon restart.
Any ideas? Anything I could have missed?
Click to expand...
Click to collapse
Which recovery are you using, because you will need at least 6.0.4.5.
Edit: 6.0.4.4 or greater.
That's not a recovery problem, it happens to me when I restore all my apps, reinstalled them manually and problem is gone
Sent from my SGH-T679 using XDA Premium 4 mobile app
I'll give that a try next weekend and see if it helps. Thanks for the tip!
For jfbs I'm running cwm 6.0.4.5
I agree with taz. After reading the op again I see that I parsed the words too liberally.
phone wont work
when i flashed the latest build of this rom it worked fine up until i got done with the setup! when i clicked finish setup a message pops up and says the the system ui force closed then the set up wizard kept force closing! any suggestions?
kirk_harris said:
when i flashed the latest build of this rom it worked fine up until i got done with the setup! when i clicked finish setup a message pops up and says the the system ui force closed then the set up wizard kept force closing! any suggestions?
Click to expand...
Click to collapse
Will you send @...Awesome... a pm since I don't think you're able to post yet in the dev. section, or I can repost your question in his thread if you'd like, unless someone knows the answer?
jfbs said:
Will you send @...Awesome... a pm since I don't think you're able to post yet in the dev. section, or I can repost your question in his thread if you'd like, unless someone knows the answer?
Click to expand...
Click to collapse
it doesnt matter just post it and message me and let me know what anyone says but im on a galaxy exhibit 4g i downloaded cm11
Sounds like a dirty flash, wipe system 3+ times and try again
Sent from my SGH-T679 using XDA Premium 4 mobile app
Hi,
I have installed ViperOne, latest version on my HTC One.
Everything works according to plan, when I install the ViperOne_OTA_310_RC2 through TWRP it says everything was installed correctly.
I reboot according to instructions, but the phone freezes at the second start-up screen. I already tried to install ViperOne completely, but still not working. I can't seem to get the phone working unless I install the ROM again, or put back-up back on.
Hope anybody can direct me towards a solution. I already searched the forums but nobody seems to have the same problem. I guess I am doing something wrong.
Thx,
Dennis
Maybe it's a bit stupid question but how long did you wait on that second boot screen? It take a bit of time before it pops into the user interface.
I can also suggest to double check the md5 as the file can be corrupted. ( bad download )
Sent from my HTC One using xda app-developers app
Thanks for your reply.
First time i waited a few minutes.
I thought i was to quick, so tried again and waited for like 10 minutes.
I can try to download again, but i guess the file is not corrupt because the installation said it was succesfull.
Ill report back.
tried it again with a new download, same problem.
startup screen is still there after 10 minutes
Now that's weird. i installed viperone again and when it was finished booting i got the message that there was an update.
downloaded latest viperone and installed it.
still weird, but it works atm.
I'm happy for you mate. Always download the latest one and check md5 before you flash it. Also make sure your base firmware is up to date as well, ROM will not update it and it can cause that kind of problems if it's too old.
Sent from my HTC One using xda app-developers app