Hey guys,
anybody tried the new Quallcom benchmark Vellamo? If so please share your points together with ROM/kernel Version, I/O and CPU governor.
I tried
- Overcome Jupiter 3.0.1 with 3.3.0 kernel at 1.4 GHz, using sio and smartass
- latest Dip7 ROM with Overcome kernel 3.3.0 at 1.4 GHz using sio and smartass
- latest Dip7 ROM with Dip7 kernel at 1.4 GHz using bfq and ondemand
in all cases I got around 755 points after the second run (first run after boot always gives like 100 points less, I think this is due to caching).
I would like to see results from other ROM/kernel/governor combinations, like CM7 and BOCA.
Cheers
first, dont forget to give a thanks to nims11, because of him, i can publish this kernel
this kernel MAYBE only work for [ROM]Gingercruzt V2(sonygen)[Update8/11/2011]
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (883Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?05d2zri7b8a7pye <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 806 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
Download for app ( No-frills, antutu power saver, MIUIcamera, WiredTether )
">>>> www.mediafire.com/?3ne3v721u0d08wi <<<<<"
install Manually
Feature added into kernel :
1. ext4 filesystem as default ( support ext2 and ext3 too )
2. SIO, VR, NOOP, BFQ, CFQ, DEADLINE scheduler, SIO as default ( choose with no-Frillis )
3. 17 Governors ( see POLL ABOVE ) ( choose with no-Frillis )
4. Overclock upto 883Mhz
for reference about Governor and I/O scheduler
thanks to knzo
this kernel base on cm-kernel
CyanogenMod
for Overclock reference
burstlam
If you try on other rom, just please report if work
i will update feature if i can
FOR GALAXY ACE GT-S5830B ( Brazillian User ) Thanks to traduz
go to this post
OC kernel for GT-S5830B ( Brazillian User )
It will work with all cm7 roms for ace
nims11 said:
It will work with all cm7 roms for ace
Click to expand...
Click to collapse
Thanks buddy,
works for me using grif's cm, thanks people
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
^Deadly_Sin^ said:
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
Click to expand...
Click to collapse
if get unstable , please set max 806 Mhz again, enjoy
Click to expand...
Click to collapse
...................................
EmoBoiix3 said:
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I dont understand what are you talking about ??
sorry for my english
denzel09 said:
...................................
Click to expand...
Click to collapse
Yeah i know, i just posted my personal experience. works ok for me at 844 without any problems. thanks anyway for taking time to reply
Too cool for school!
Sent from my GT-S5830 using XDA App
Using gingercruzt v2 without latest update @883 stable for now viewing youtube videos, angry birds, camera working... dont ask about governors, they are to many now loool...
Good work
Edit: First reboot 30 min after flashing kernel
ti is a stable version???
---------- Post added at 08:53 PM ---------- Previous post was at 08:49 PM ----------
<witch is the best governor for powersave and for performence
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
downloadonlyaccount said:
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
Click to expand...
Click to collapse
please read link on the page one, from knzo
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
No, thats bug came from cm7 rom, not the kernel
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
Good choice not implement this, for all that use oc kernel.
In this way to boot phone should use always basic default frequencies, so avoiding fake boot ;-)
---------- Post added at 08:53 PM ---------- Previous post was at 08:43 PM ----------
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
I dont think that overVolt is possible..
squadzone said:
No, thats bug came from cm7 rom, not the kernel
Click to expand...
Click to collapse
the problem is from the kernel dude,I'm running gingercruzt V2 on ketut's kernel everyting is fine on yours dosn't show min/max frequency in performence settings
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
Can you build the kernel??
i read many reference what the best max freq for kernel, and the 883Mhz, is enough for hardware,
so this kernel not just compile, but i read every log when build this kernel and try to fix, to minimize error mod post
if you dont like, dont use it, i just want to share, what i'm doing, and if you like, just give a thanks
maybe i can give a clue, just read below
see this code
Code:
/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
enum {
VDD_0 = 0,
VDD_1 = 1,
VDD_2 = 2,
VDD_3 = 3,
VDD_4 = 3,
VDD_5 = 3,
VDD_6 = 3,
VDD_7 = 7,
VDD_END
};
max freq use code 7, its mean corresponds to 1.325V ( max volt )
go, and build your self,
if you know the bug,
please report, not complain
every device with same type is not same on hardware, some people can boot at 883Mhz, but some people cant, and my kernel freq 883Mhz, but not default, all people will know, if freq is bigger than default its mean OC kernel
all feature is not just add but with some modification that need by device for get best result
sorry for my english
Hello everybody I'm glad that I'm finally able to post my own thing in development section.
It's called Strong Accord because I'm accordionist and in future I'd like to make a rom with really good music sound
This kernel has been made for V30B (I didn't test it on CM10, it may work) and it's based on N00by's pure kernel. Compiled with linarno 4.6.
♪ ♪ ♪ CHANGELOG - v30b ♪ ♪ ♪
Code:
[B]Prelude - beta phase[/B]
- Added governors - Lionheart, Interactivex, SavagedZen
- Added shedulers - VR
- Compiled with -O3 optimization flags
- Undervolted WLAN and CPU
- Underclocked CPU min freq. to 250 MHz and overclocked max to 1050 MHz
- Overclocked GPU
- Dimmed softkeys leds to half of their power. Blue ones work as well
[B]Toccata - R.C. 0.1[/B]
- Added governor - SmartassV2
- Added scheduler - SIO
- Changed clocks to 250/500/700/900/1100
- fixed Wifi hotspot problem
- fixed some voltages problems
[B]Toccata - R.C. 0.2[/B]
- lowered CPU voltages
- OC GPU (290 MHz)
- made NemesisX version
[B]Toccata - R.C. 0.3[/B]
- optimized CPU voltages
- OC GPU (295 MHz and there won't be more)
- removed wheatley governor
- should work for every V30b based rom
[B]Toccata - R.C. 0.4 [/B]
- added init.d support from http://forum.xda-developers.com/showthread.php?t=1933849
- UC GPU to 285 MHz
- added OndemandX governor
- auto-clean Dalvik-Cache and Cache partitions
- set SIO and SmartassV2 as default
- some improvments at Deadline sheduler
- changed voltages
♪ ♪ ♪ CHANGELOG - v30c ♪ ♪ ♪
Code:
[B]Adagio 0.1 - Stable version [/B]
- Added governors - Lionheart, Interactivex, SavagedZen, IntelliDemand
- Added shedulers - VR and SIO
- Undervolted WLAN and CPU
- CPU clocks 250/500/700/900/1100
- Overclocked GPU to 285 MHz
- Added some tweaks
- init.d support
[B]Adagio 0.1a - Stable version [/B]
- Added SmartassV2
Download Prelude Version - http://d-h.st/48u
Download Toccata Version - http://d-h.st/yWG
Download Toccata Version 0.2 - http://d-h.st/Xdh
Download Toccata Version 0.2 NemesisX - http://d-h.st/M7b
Download Toccata Version 0.3 - http://d-h.st/GSy
Download Clean Repack V30C with Blue leds and init.d support http://d-h.st/Aab - should work with V30C rom
Download Adagio 0.1 - Stable version - http://d-h.st/KHW
Download Adagio 0.1 - Stable version HIGH VOLTAGE - http://d-h.st/AFa
Download Adagio 0.1a - Stable version - http://d-h.st/cCW
Download Adagio 0.1a - Stable version HIGH VOLTAGE - http://d-h.st/Uck
Source - https://github.com/Hellmanor/kernel_sniper-ICS
Source - https://github.com/Hellmanor/kernel_v30c
If somebody has USB Mass Storage problem just Re-launch USB Developer Options.
If Wifi doesn't work take from your rom file called wireless.ko in system/etc/wifi and replace it with that in my kernel.
Thanks to N00by for his CWM and LEDs fixes and andr00ib for support
If you like my work, you can buy me a beer
Enjoy it!
and i just thought that you'r a Honda fanatic.
Accord, Prelude..
you'r kernel sounds good, maybe i'm going to try tomorrow..
now i'm on zerogravity kernel.
I'm trying this kernel in ultrsound v30b.
After first boot phone was very slooow, I show in setcpu that max freq was 250, I changed it to 1050 and now phone is faster than before.
I tried to set smartassv2 governor but is missing in setcpu.
Wifi hotspot doesn't work, like in zerogravity kernel, is disabled in less than 1 second.
Led light is a little low, but I prefer it like that.
jes0411 said:
I'm trying this kernel in ultrsound v30b.
After first boot phone was very slooow, I show in setcpu that max freq was 250, I changed it to 1050 and now phone is faster than before.
I tried to set smartassv2 governor but is missing in setcpu.
Wifi hotspot doesn't work, like in zerogravity kernel, is disabled in less than 1 second.
Led light is a little low, but I prefer it like that. It would be nice if led's don't turn off until turn off screen.
Click to expand...
Click to collapse
how is the battery drain and Bluetooth
joker shadow said:
how is the battery drain and Bluetooth
Click to expand...
Click to collapse
I just installed the kernel now, hadn't have time to try bluetooth and battery.
Anyone else has wifi hotspot problem? 'Cause for me it's good...
And sorry - I didn't mean to miss SmartAss. I hope new version of kernel will appear in 5-6 hours from now - I can't do it faster, because I have exams.
Great to have new dev thread
but dont forget to provide source
http://forum.xda-developers.com/showthread.php?t=1992818
Using this kernel now with ultrasound ICS, good battery and smooth on game(NFSMW), never got this game so smooth before with any ICS I try. Thanks
Sent from my LG-P970 using Tapatalk 2
I hope you wont stop development of this kernel cause andr00ib droped support for ZeroGravityKernel for V30B.
At the Moment i use your kernel but i get ultra low 3D scores in antutu. Only about 600 or so.
No, I won't. Right now I'm trying to set github.
I think I fixed wifi problem.
And you've got strange score... I have 1196 in antutu...
EDIT: It will take some time to set git (my upload speed is so bad...), so I will just merge kernel and post it here...
Hellmanor said:
No, I won't. Right now I'm trying to set github.
I think I fixed wifi problem.
And you've got strange score... I have 1196 in antutu...
EDIT: It will take some time to set git (my upload speed is so bad...), so I will just merge kernel and post it here...
Click to expand...
Click to collapse
It was because of the interactive governor. on performance i got 1189.
savadgedzen: stuck at 250mhz
ineractivex: goes only down to 600mhz
interactive: seems to work
conservative: seems to work
ondemand: seems to worlk
Lionheart: seems to work
performance: works (of course it does
Thanks for your effort. I will look into code. Also I will try to enable o/c to 1200 MHz and stock 1000.
I enabled smartass v2 and sio governor. I think about adding Anticipatory scheduler.
And pls remember - I'm new in developing, but I will try my best
Try! And if you fail........try again.
Hellmanor said:
Anyone else has wifi hotspot problem? 'Cause for me it's good...
And sorry - I didn't mean to miss SmartAss. I hope new version of kernel will appear in 5-6 hours from now - I can't do it faster, because I have exams.
Click to expand...
Click to collapse
It seems to be ultrasound v30b v2 problem, sorry for post it in this threat without check it with stock kernel on this rom.
EDIT: Maybe I have to check it too, beacuse I'm not on stock.
just wanna ask, why did OB max OC is only 1350Mhz??
123r4ka456 said:
just wanna ask, wht did OB max OC is only 1350Mhz??
Click to expand...
Click to collapse
yes.
Sent from my LG-P970 using Tapatalk 2
OMAP 3630 can't handle more than 1300 MHz without issues. Stable is 1200 MHz
When can we expect version with 1000 and 1200 ?
And what about those new comits from arce , will you implement them ?
And another thing , will 1200 freq be undervolted ?
Cant wait for new version
Yes, I just want to be sure that all things are stable.
Can you show me that commits?
I flashed the http://forum.xda-developers.com/showthread.php?t=2159519 SuperNexus kernel which is on version 4.2.2 Jellybean, and I'm liking it ^.^
Now, I was on ICS for quite a long time (too many unstable JB roms) and of course, the kernel I should use and the i/o scheduler and cpu governor changed, as I'm on jellybean now. I was using Devil with Smartassv2 and noop on ICS and it seemed to be working great. What kernel shall i flash for the supernexus? It comes with a cyanogen mod one which i don't like, and which i/o scheduler and cpu governor shall I use? Write below, with a reason.
Thanks!
No one, seriously?
You can try this. I'm using it and it's amazing:
http://forum.xda-developers.com/showthread.php?p=34895124
Sent from my GT-I9000
GrippingSphere said:
You can try this. I'm using it and it's amazing:
http://forum.xda-developers.com/showthread.php?p=34895124
Sent from my GT-I9000
Click to expand...
Click to collapse
I'll give it a shot! Oh, by the way, what I/O scheduler are you using and what CPU governor?