Hi,
I own a Moto X DE for few days. It runs Kit Kat, and is unlocked and rooted with TWRP. Today, I've got a notification about an OS update. But when I try to update my system, the phone reboots on the TWRP menu, and no way to update.
Any idea about this?
Thanks.
I have a the T Mobile (Same as Dev). Had it rooted and bootloader unlocked. I didn't really care for saving data tbh. So what I did was return to stock.
Already had the 4.4 in my fastboot folder. So I booted into recovery and wiped everything.
Then went back to download mode and fastbooted the T-Mobile 4.4 version. Ran phone setup, check for update and installed. Took about 10 minutes max.
Though of course this is one way out of a few. The stickies in this section have the various ways. Find one which better suits you.
Do note you should not take OTA with root and a custom recovery
Sent from my XT1053 using Tapatalk
Thanks, should have read a bit before asking. Sorry, and thanks again for the help.
Hello,
Is there any one using the ATT GS5 on Tmobile network (obviously Tmobile SIM) with wifi calling working ? (Please..please.. I know ATT does not have wifi calling, But if you use a Tmobile Rom with Tmobile sim, you expect to have it working) !!
If yes, would you please share which ROM you are using ? Also if there is a trick to make it wok please share it?
Thanks
no luck so far
This is not a solution, I just wanted to report what I have tried so far.
I have a G900A with a t-mobile SIM card. I called TMO to make sure wifi calling was enabled on my line. I used towelroot + safestrap to install the t-mobile Alliance rom (B4), as well as the latest stock TMO rom. So far, wifi calling does not work. It is always stuck on "Enabling" in the calling options menu. VoLTE doesn't work either, but I wasn't expecting it to. My guess is that there is something in the TMO baseband that makes these things work and that ATT phones don't have.
Any hints and ideas would me much appreciated!
No solution yet...
Guillaume2x said:
This is not a solution, I just wanted to report what I have tried so far.
Any hints and ideas would me much appreciated!
Click to expand...
Click to collapse
JJ here,
I tried this ROM - [ROM] G900TUVU1BNH5 ported from TMobile, rooted, deodexed, no knox, Download Booster
... everything works, nice and smooth, but the Wifi Calling is stuck "Enabling"...
Same boat.
My att s5 is unlocked and on the tmobile network. Your telling me i can flash the tmobile stock rom? And everything will be working properly, except wifi calling?
chronichemp said:
My att s5 is unlocked and on the tmobile network. Your telling me i can flash the tmobile stock rom? And everything will be working properly, except wifi calling?
Click to expand...
Click to collapse
Yes. In particular, Mobile Hotspot will work.
Guillaume2x said:
Yes. In particular, Mobile Hotspot will work.
Click to expand...
Click to collapse
Will everything else work properly? I mainly need the t mobile stock rom to enable mobile hotspot, I have an ATT phone and do not wish to trip efuse. Thanks
does anyone know if the same issue will happen with the international version?
On a similar topic, my dad has a AT&T Samsung Galaxy S5 which was sold in Malaysia. And I found out that his phone was not able to hotspot. I have downloaded the official firmware of Samsung Galaxy S5 for Malaysia and was going to use Odin to flash the firmware into his phone. Does that work and not brick the phone? The phone seems to be unlocked as it can be used here except the firmware and the phone is AT&T barnded. Any advise? Thanks
Sent from my iPad using Tapatalk
It all works!
Guys, I have some great news. Both wifi calling AND VoLTE now work on my SM-G900A on the T-mobile network. Here is what I did:
I installed the latest ATT firmware (OA1), released earlier this February. OTA update did not work, so I had to flash the original firmware (ANCE) via Odin, and then flash the two subsequent updates using update.zip on the SD Card. This will remove safestrap and root, but fear not.
Once my phone had AO1 installed, I used this tutorial to root the phone again. It invonves temporarily flashing an earlier (ND3) kernel, using TowelRoot, and then reflashing the OA1 kernel
With my OA1 rooted, I installed safestrap. Make sure you install busybox first.
With safestrap, I installed the T-mobile Alliance Rom (build B4).
Seconds after booting, both Wifi Calling and Voice over LTE work!
Enjoy!
Guillaume
Hi Guillaume,
Have you tried just installing the stock T-mobile 5.0 firmware on a Att GS5 ?
I have my GS5 in ND3 rooted and I'm on Tmobile, but the procedure you have seems really long...
I really need wifi calling as I'm travelling a lot and it allows to call my wife when I'm back in France.
Thanks
Guillaume2x said:
Guys, I have some great news. Both wifi calling AND VoLTE now work on my SM-G900A on the T-mobile network. Here is what I did:
I installed the latest ATT firmware (OA1), released earlier this February. OTA update did not work, so I had to flash the original firmware (ANCE) via Odin, and then flash the two subsequent updates using update.zip on the SD Card. This will remove safestrap and root, but fear not.
Once my phone had AO1 installed, I used this tutorial to root the phone again. It invonves temporarily flashing an earlier (ND3) kernel, using TowelRoot, and then reflashing the OA1 kernel
With my OA1 rooted, I installed safestrap. Make sure you install busybox first.
With safestrap, I installed the T-mobile Alliance Rom (build B4).
Seconds after booting, both Wifi Calling and Voice over LTE work!
Enjoy!
Guillaume
Click to expand...
Click to collapse
Thanks as this is great news for us G900A users on TMO! Question though: After 0A1 installed/backedup and Alliance installed, did you use safestrap [TWRP] to restore your data from 0A1 install?
Geek007W said:
Thanks as this is great news for us G900A users on TMO! Question though: After 0A1 installed/backedup and Alliance installed, did you use safestrap [TWRP] to restore your data from 0A1 install?
Click to expand...
Click to collapse
Actually no; I had been using the t-mo alliance rom using safestrap for a long time (just with the old ATT modem and kernel), so I just restored the data associated with that.
Some more info after a day of tests:
You can also install the 5th build of Alliance Rom, it works too
The camera sometimes glitches a bit; toggling HDR on/off fixes it
Except for the camera glitch I'm pretty happy with it!
Jojososo said:
Hi Guillaume,
Have you tried just installing the stock T-mobile 5.0 firmware on a Att GS5 ?
I have my GS5 in ND3 rooted and I'm on Tmobile, but the procedure you have seems really long...
I really need wifi calling as I'm travelling a lot and it allows to call my wife when I'm back in France.
Thanks
Click to expand...
Click to collapse
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Guillaume2x said:
Actually no; I had been using the t-mo alliance rom using safestrap for a long time (just with the old ATT modem and kernel), so I just restored the data associated with that.
Some more info after a day of tests:
You can also install the 5th build of Alliance Rom, it works too
The camera sometimes glitches a bit; toggling HDR on/off fixes it
Except for the camera glitch I'm pretty happy with it!
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Click to expand...
Click to collapse
Agree with the last expletive.
I did install in alliance B4 in slot 1 of Safestrap and both wi-fi tether and calling worked well. However, my G900A would not reboot or shutdown (dark screen) without a battery pull. After power up...worked?!?!
Did you install as "Stock" or in a slot?
Also have a G870A (Active). Do you know of anyone attempting the 0A1 method and Alliance Rom with the s5 Active?
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Click to expand...
Click to collapse
What would happen if I odin a Stock T-mobile firmware and let T-mobile update it ?
Will it update the Baseband etc ?
Geek007W said:
Did you install as "Stock" or in a slot?
Click to expand...
Click to collapse
I only use the stock slot.
B4 seems a bit more than stable than B5 for some reason. I get some signal issues with B5, and the fingerprint scanner sometimes fails. (It works when I first install B4, use it for a while, and then upgrade to B5. But if I do a /data wipe on B5, these issues appear. I have no idea why).
---------- Post added at 06:15 PM ---------- Previous post was at 06:11 PM ----------
Jojososo said:
What would happen if I odin a Stock T-mobile firmware and let T-mobile update it ?
Will it update the Baseband etc ?
Click to expand...
Click to collapse
You can't do that, the bootloader is locked.
Guillaume2x said:
You can't do that, the bootloader is locked.
Click to expand...
Click to collapse
Okay thanks,
So I started the steps, I've Odin the original firmware and factory reset on but my baseband stayed ND3...
Tried the OTA update hoping that it would work, but as expected it did not.
So I guess I'm at step 1 of your step one.
Then you said you pushed the update via sd card, where did you find the updates ?
Then I'll do the other steps!
Baby steps by baby steps, F... it's been a long time since I rooted my ipod 1st gen to crack my ps3!
Jojososo said:
Okay thanks,
Then you said you pushed the update via sd card, where did you find the updates ?
!
Click to expand...
Click to collapse
They are in the post that I linked to, under the troubleshooting section. If you want to keep your user data, use adb sideload instead of recovery
Guillaume2x said:
I only use the stock slot.
B4 seems a bit more than stable than B5 for some reason. I get some signal issues with B5, and the fingerprint scanner sometimes fails. (It works when I first install B4, use it for a while, and then upgrade to B5. But if I do a /data wipe on B5, these issues appear. I have no idea why).
Click to expand...
Click to collapse
OK. Installed in stock slot but ROM behaved much differently.
1. Wifi sms/mms work both send/receive but erratically.
2. Outgoing calls connect then immediately drop with local "cancelled" within a few milli-secs with a partial ring at the far end.
3. Can't receive calls at all. TMO network thinks I'm offline even though can receive a text.
3. Phone App GUI stutters when making a call.
4. Camera is basically not usable.
Where there any special steps you took to get this working installed in the stock slot? Has your install remained stable? Thanks in advance.
Geek007W said:
OK. Installed in stock slot but ROM behaved much differently.
1. Wifi sms/mms work both send/receive but erratically.
2. Outgoing calls connect then immediately drop with local "cancelled" within a few milli-secs with a partial ring at the far end.
3. Can't receive calls at all. TMO network thinks I'm offline even though can receive a text.
3. Phone App GUI stutters when making a call.
4. Camera is basically not usable.
Where there any special steps you took to get this working installed in the stock slot? Has your install remained stable? Thanks in advance.
Click to expand...
Click to collapse
My phone is still working flawlessly. What your are describing is what happened to me during the short period I reverted to the NG3 kernel in order to use Towelroot. Did you make sure to reflash the OA1 kernel once you were rooted? (before installing safestrap and, within safestrap, installing the Alliance Rom). I have found Alliance B4 to be more stable, so you could try that. Finally, a factory reset (wipe option in safestrap). Beyond that, you could try the whole thing again: flash the "downgrade to NCE" rom, which will remove safestrap and clean everything up; and take the tutorial from there.
Guillaume2x said:
My phone is still working flawlessly. What your are describing is what happened to me during the short period I reverted to the NG3 kernel in order to use Towelroot. Did you make sure to reflash the OA1 kernel once you were rooted? (before installing safestrap and, within safestrap, installing the Alliance Rom). I have found Alliance B4 to be more stable, so you could try that. Finally, a factory reset (wipe option in safestrap). Beyond that, you could try the whole thing again: flash the "downgrade to NCE" rom, which will remove safestrap and clean everything up; and take the tutorial from there.
Click to expand...
Click to collapse
Thanks again Guillaume,
Was running OA1 prior to Alliance B3, so just wiped Dalvik and Cache again, rebooted and left phone for the night. By next morning all was well except for the camera HDR issue. Once toggled it is OK until closed and reopened. Haven't had the time to look into whether there are Alliance B4 options which may affect this.
Have run it a few days and have had zero issues with Wi-Fi calling or tethering or apps: a very smooth experience.
Thanks again for your contribution. Also muniz_ri will find a bottle of wine on the doorstep soon. :highfive:
So just to summarize what I've done so far, I have a Moto G (2014) which has been updated to Lollipop through normal means. I started off following this guide: http://forum.xda-developers.com/moto-g-2014/general/xt1063-t3018818/page12
The guide then lead me to this one, as my model is XT1064, a Moto G from Windmobile. I had no issues unlocking my bootloader. http://forum.xda-developers.com/moto-g-2014/development/xt1064-lollipop-root-t2938051
With the guide above, after I flashed that file, my wifi would not turn on. Every time I pressed the toggle, it would immediately switch back to off. I then flashed the TWRP Recovery, and used that to finally root my device with SuperSU.
I checked my root, and my device is confirmed to be rooted, but the wifi is still not working. I looked around a little, and found this: http://forum.xda-developers.com/moto-g-2014/general/guide-lollipop-xt1064-north-edition-t2955076
The problem with the guide above is that its for a phone that was kitkat, while my phone is already lollipop. The guide does mention the wireless issue though, so I was thinking of trying out the steps outlined in that guide, also using that file (though that file is for 4.4).
Would this work? Or is the safer bet finding an 5.0.1 stock rom, and flashing back to that?
Edit: I found a link to a 5.0.2 stock rom (which is the version my phone currently is) I think downloading that and using that to fix the modem files is the better thing to do. (link: http://www.filefactory.com/file/53c1pepzp9cp/RETCA_XT1064_5.0.2_LXB22.99-24.2_cid14_CFC.xml.zip)
Thanks for all and any help.
I recommend flashing the stock images, that will almost certainly fix your issue with Wifi.
I'm currently stuck at the s5 active logo screen and then it boots into recovery. I've tried flashing the full odin.rar (yes I extracted it) and it fails everytime. I get the message "Sw REV CHeck Fail: [aboot]Fused 2> Binary 1. I've already tried wiping the data from the recovery menu. Nothing is working.
We need more info. What were you attempting to do and from what ROM. Are you sure you are using the proper ROM 900 or 870?
I was attempting to downgrade back to stock from 5.0 and hit the stock kernel instead of the firmware accidently when in odin. And yes I am absolutely sure i'm using the 870 rom.
Edit: What if I use a stock img and a PIT file for the phone? OR is it because I need a 5.0 lollipop firmware to flash through odin?
Edit number 2: okay I'm stupid, im on G870AUCU2BOF3. I'm going to have to reflash the of3 zip aren't I?
Okay so I found the OF3 cfg on another thread and was able to load it and flash it and get my phone working! Now, the next question is can I root in my situation or downgrade or am I just stuck?
Edit: Going to wait for a possible root! Mod can close this thread.
if you loaded the 2400258.cfg you probably loaded the OF3 bootloader as well and now you can't go back. No root at this time and it doesn't look good for the future.
Cloudsdabomb said:
Okay so I found the OF3 cfg on another thread and was able to load it and flash it and get my phone working! Now, the next question is can I root in my situation or downgrade or am I just stuck?
Edit: Going to wait for a possible root! Mod can close this thread.
Click to expand...
Click to collapse
At command prompt type without the qoutes.
"getprop ro.bootloader"
Then paste output.
Sent from my SAMSUNG-SM-G870A using Tapatalk
If you took the of3 ota or are otherwise on the of3 bootloader your stuck there....no downgrade or root as of this time.
Me too
I am in a similar situation. Saturday I was on a rooted 4.4.2, flashed a stock unrooted 4.4.2 with Odin (G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5), let AT&T update me to 4.4.4, installed the old kernel with Odin (G870A_NE4_Stock_Kernel.tar.md5), rooted with towelroot, installed the new kernel with Odin (G870A_OA1_Stock_Kernel.tar.md5), updated to 5.0 with Odin and it retained root. However, certain things such as XPosed didn't work and I really really hated the white notification drawer so I just want to go back. I tried flashing the stock 4.4.2 in Odin again and it said success. It restarts and seems to be working but gets stuck on the AT&T logo. Now if I restart it always sticks on the AT&T logo even when I flash again. I don't know what else to try. A different file? Is there a way to go back to KitKat?
Update: I got into recovery mode (I kept trying vol up, vol down, power but it's actually vol up, home, power). I wiped the cache and did a data reset and restarted the phone. It worked! I'm excited to have a black notification screen again
pgross41 said:
I am in a similar situation. Saturday I was on a rooted 4.4.2, flashed a stock unrooted 4.4.2 with Odin (G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5), let AT&T update me to 4.4.4, installed the old kernel with Odin (G870A_NE4_Stock_Kernel.tar.md5), rooted with towelroot, installed the new kernel with Odin (G870A_OA1_Stock_Kernel.tar.md5), updated to 5.0 with Odin and it retained root. However, certain things such as XPosed didn't work and I really really hated the white notification drawer so I just want to go back. I tried flashing the stock 4.4.2 in Odin again and it said success. It restarts and seems to be working but gets stuck on the AT&T logo. Now if I restart it always sticks on the AT&T logo even when I flash again. I don't know what else to try. A different file? Is there a way to go back to KitKat?
Update: I got into recovery mode (I kept trying vol up, vol down, power but it's actually vol up, home, power). I wiped the cache and did a data reset and restarted the phone. It worked! I'm excited to have a black notification screen again
Click to expand...
Click to collapse
How long did you have to wait for your phone to boot all the way up from the ATT logo? Mine is doing exactly the same thing and I've flashed all kinds of kernels via odin and heimdall with no affect. None of the various fixes I've found have helped, including trying to re-apply the OTA file (system just won't do it). All I wanted was to unroot. Awesome.
The first boot can take a while but if it lasts more than 10 minutes it's probably not going to happen. I've gotten it stuck there twice since my last post and I'm always able to salvage it by going into recovery mode (vol up, home, power while powered off). Wipe the cache and data reset and it should be a fresh start like out of the box new.
Hm. So the only real two options are take it in to AT&T and hope they have the full stock G870AUCU2BOF3 image to flash over (since Samsung locked down their bootloader so hard, so downgrading is impossible :good: ) or hope they release G870AUCU2BOF3 on SamMobile/Kies/Smart Switch. This is like the new hard brick... potentially it's salvageable but the company (I'm guessing AT&T here since this is an AT&T exclusive phone) is just screwing us. Guess I'll try the walk of shame to AT&T. Or maybe putting in a claim like that one person did, get a whole new phone because of a mysterious cut on the rear panel seal...
Alright, took it in to AT&T and sure enough they had the full 5.0 image available so after signing a no-return data waiver (didn't even confirm my AT&T account or ask for any ID) the tech took my phone in the back and flashed it back to stock. First boot still showed the "custom" with unlocked padlock on the boot screen but after I rebooted it, I guess it updated the bootloader because it was back to normal.
No more root and he confirmed there's no way to go back to 4.4 once you go up to 5.0, so if you want root, I'd suggest staying away from 5.0. At least now I can use my phone again. Just thought I'd post this up in case anyone wasn't sure if AT&T would actually be able to reflash stock 5.0 and at the very least get your phone working again... enough to put on ebay and get a Moto or some other brand that doesn't lock down the bootloader so hard.
Edit: note the first boot will take a few minutes but I knew it worked when there was a quick vibe and the notification light went from pulsing blue to off. Maybe 4-5 minutes.
retro486 said:
Alright, took it in to AT&T and sure enough they had the full 5.0 image available so after signing a no-return data waiver (didn't even confirm my AT&T account or ask for any ID) the tech took my phone in the back and flashed it back to stock. First boot still showed the "custom" with unlocked padlock on the boot screen but after I rebooted it, I guess it updated the bootloader because it was back to normal.
No more root and he confirmed there's no way to go back to 4.4 once you go up to 5.0, so if you want root, I'd suggest staying away from 5.0. At least now I can use my phone again. Just thought I'd post this up in case anyone wasn't sure if AT&T would actually be able to reflash stock 5.0 and at the very least get your phone working again... enough to put on ebay and get a Moto or some other brand that doesn't lock down the bootloader so hard.
Edit: note the first boot will take a few minutes but I knew it worked when there was a quick vibe and the notification light went from pulsing blue to off. Maybe 4-5 minutes.
Click to expand...
Click to collapse
It's not Samsung that locks down the bootloader, it's AT&T. the T-Mobile Version doesn't have a locked bootloader and is easily rooted . Just have to SIM unlock it and you can use T-Mobile phone on AT&T network.
Delete