I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
teddycypria said:
I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
Click to expand...
Click to collapse
Hi Mate dont panic it´s easy to fix have u try any Nflash procedure yet ?
Try Stefans V28G via nflash:
http://forum.xda-developers.com/showthread.php?t=1986097
Direct link: http://d-h.st/PNj
Installation NVFlash version (under Windows): (internal SD will be wiped, /data partiton can be saved and restored with 2nd generation builds)
download the ROM, unpack it with WinRar, 7Zip or similar to any folder you want
take battery out of phone, press VOL + AND VOL - simulataneously, and while doing this plug the phone via USB to your PC
screen of phone remains black, this is normal, but you should hear a sound that you plugged the device. Probably you have to install APX drivers at this point if you are asked. They are included in the latest NVFlash builds. Tutorial on driver installation: http://www.modaco.com/topic/335416-n...-links-active/
assuming that you already installed APX drivers: run the "flash_windows.bat" file in the folder where you extracted the ROM
follow the instructions
That's already it Usually no complications to be feared. Enjoy!
Click to expand...
Click to collapse
You can connect phone to pc and copy a cm10, don't reboot phone, you must mount mass USB storage. Copy and flash: )
Inviato dal mio LG-P990 con Tapatalk 2
Will try it out
Thanks Domfis and Creison, I will try it out and see what happens. I hope it works :fingers-crossed: out cause I really do not wish to change my phone now that official ICS is out. If I manage to do this I will wait till summer to change my phone. Currently using my old nokia 3310
teddycypria said:
I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
Click to expand...
Click to collapse
Please ask all questions in Q&A. Thread moved there.
teddycypria said:
Currently using my old nokia 3310
Click to expand...
Click to collapse
ROFL!!! :laugh:
assistance plz
also getting same message.but when flashing rom says no os want to continue. any help would be great. still have stock rom.
infamous215 said:
also getting same message.but when flashing rom says no os want to continue. any help would be great. still have stock rom.
Click to expand...
Click to collapse
i suppose you're on the old bootloader? then just use AIO Toolkit ->> http://forum.xda-developers.com/showthread.php?t=2020737
Use Option 4, then you'll get the new bootloader and CWM installed. Afterwards just flash a ICS Rom or CM10(ICS BL) via CWM!
error
I have had LG P9920 Rooted phone and its working smoothly( I rooted my phone using cyanogenmod 10.2 and super user cmd ) .yesterday I try to install new kikkat os for my rooted lg phone . and I am download new recovery .img and zip file ,then I mounted twrp recovery .img file in command line in phone (dd-if ….)after mount that .img I restarted my phone and boot up twrp the I wiped data, davlik-cache and everything else. So I don't get a backup. Then system and android data I wiped.it error shown “e: unable to mount sdcard .system and fail to factory reset “…
I cant see internal memory its show 0mb.so I tried to several time wiped data and everything, but finally “TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot? “
Please anyone who can have same idea above this matter please help me, I appreciate all effort.
mahesh dimuthu said:
I have had LG P9920 Rooted phone and its working smoothly( I rooted my phone using cyanogenmod 10.2 and super user cmd ) .yesterday I try to install new kikkat os for my rooted lg phone . and I am download new recovery .img and zip file ,then I mounted twrp recovery .img file in command line in phone (dd-if ….)after mount that .img I restarted my phone and boot up twrp the I wiped data, davlik-cache and everything else. So I don't get a backup. Then system and android data I wiped.it error shown “e: unable to mount sdcard .system and fail to factory reset “…
I cant see internal memory its show 0mb.so I tried to several time wiped data and everything, but finally “TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot? “
Please anyone who can have same idea above this matter please help me, I appreciate all effort.
Click to expand...
Click to collapse
Since data is lost anyway, try running AIO toolkit to reflash the bootloader which also fixes recovery and partitions.
Hey guys,
I flashed on a sense 4.1 rom from a chinese website, I used it for a bit,
until i rebooted and wifi would not work.
so i got back into recovery, (4ext touch) and wiped everything.
I then tried to flash on unofficial CM10, but it came up with status 7 symlink error.
Any ideas guys?
from what i read, a kernel can repartition the internal storage or something?
Also running blackrose 2.02
Thank you!
EDIT: the error comes up with EVERY rom i try to flash,
and now my phone refuses to turn on, like the numerous times it has done that
Just bought the phone and Dev Unlocked it and Rooted it, after abit of failure I managed to root it. Phone worked fine I tried to install a mod and that's when I thought If there's any errors I can just delete everything and install but that wasn't the case it would stay frozen, I tried aroma manager it wasn't showing much files so I thought I would try and install the stock rom again that didn't work I then tried another rom and just been booting to CWM the sd won't mount so I been sideloading these files. :crying:
Before flashing the stock ROM you need to relock the phone first.
I just managed to get the phone working again
But a problem I have is that certain apps will fail to install on my phone like root explorer I would get a message saying Couldn't install on USB or SD card. Is this due to a partition or some other type of error? I had more or less the same problem on my S2 when I went back to stock. I later installed CM10 and the problem didn't occur, would I need to install another rom or is there a slightly easier fix for this?
Hi guys,
I'm trying to install CM11 in my i9000, latest Semaphore (CWM 6.0.4.7), but I'm not able to wipe the data or system partition, the screen flashes and goes back to the main screen. Not only that, but when I try to flash the CM11 zip, I get the "Status 0" error message. I've searched, and I know that it means I should reboot and flash again, but I tried it multiple times and I still get the same error message. Has anyone had this issue? Any idea on how to solve it?
Thanks!
To help you, I need some information, like:
What version do you have now?
What Semaphore version? Not the CWM version.
I was wrong status 0 means you need to update your recovery.
Sent from my phone. Why would you need to know what device I have?
read here http://forum.xda-developers.com/showthread.php?t=1437936
Hey there,
just tried to flash this ROM to my Ace.
I updated CWM to the required 6.0.5.3_1, wiped data/factory reset and formatted /system.
Everytime I try to install the .zip, I get the "installation aborted" message. No error code, no more information.
Would be awesome to get some help, cause i cant find this problem in the forum, only some with error codes.
I used an earlier version of CM on this device before trying to flash it now.
Greetings
Installed a non-modded version of CM now, which worked fine.
Getting the status 0 error now when installing the original CM gapps. Any solutions?
lolmachine said:
Installed a non-modded version of CM now, which worked fine.
Getting the status 0 error now when installing the original CM gapps. Any solutions?
Click to expand...
Click to collapse
1. Are you using a CM11 compatible recovery?
2. Are you the complete files downloaded? or have you an unstabe internet connection?
Try to donwload the files again