Related
for some reason i went to reboot my phone and it wontboot just hangs.. can boot to recovery and do a factory reset.. but still wont boot.
cannot boot to download mode with vol up keypad and power.. just continually reboots to the samsung white message and starts over.. any suggestions or should i just send it back?
got it working whey.. it wouldnt boot up to recovery.. got it to goto recovery during a boot loop by plugging in usb.. i think.. the only think i can think is that earlier today i replace the mms.apk and mms.odex with an earlier version from jf3.. didnt like that at all. but i didnt reboot till later.. this was to try and work around the messaging bug in jg1.. .since i had to reinstall i am happy to report as previously reported that the the csc from jff messaging works fine the the modem and core files from jg1.. (that is what i reflashed it too..)
[Q] Help! Think I bricked my phone!!
Flashed to WJG1
Started Odin,it started to do its thing.halfway through I got the USB disconnect sound.Odin stopped , I now have a green screen
And u cant boot it to either restore or download mode?
Sent from my GT-I9000 using XDA App
Remove battery! put it in again!
Start in download mode! (volume down+home+power)
and reflash!
Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.
saldawop said:
Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.
Click to expand...
Click to collapse
Did you use the other 512.pit file? and did you check re-partition?
Make some screenshots!
Yes to both
Did you install the latest version of Kies? (just for the driver?)
And did you close kies before you started flashing?
I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?
saldawop said:
I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?
Click to expand...
Click to collapse
As far as i know you can flash whatever firmware you would like! the best option right now is to use JG5!
Correct me if i'm wrong!
Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.
saldawop said:
Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.
Click to expand...
Click to collapse
Yes i am on WJG5! you can root it and you can use the lagfix!
I am currently using it without the lagfix and it works great! no blackscreens whatsoever!
Question! did you remove the simcard and sd card when you where flashing with odin?
It shouldn't be scanning for media all the time! don't know whats wrong!
Yes I did.
Following a tutorial which says to uninstall Market from Applications.When I go to Applications(clicking Fliter>All) and bringing up Market there is no option to delete
Here mate, have a look at some suggestions.
And some other quick - you should have run kies before the flashing, so it would install all the drivers, it might be your problem.
Maybe a moderator can pin this, ot some other inbricking topic/guide?
Link to tutorial - http://forum.xda-developers.com/showthread.php?t=725858
Yeah but I have flashed it about half a dozen times previous with no problems.
Well, I dont know what happened, but after setting up my phone pretty much as it was before I thought "I didnt do a factory reset after flashing the rom", so I did so.Rebooted,went to Market and all apps are showing
What does a factory format do??
I thought it would wipe everything off the phone?
After doing one on my newly flashed SGS, I had a look at the SD card and all the folders of games/programs were still there.
i was afraid too when i flashed with the latest firmware last week
odin did nothing, so after 10 mins i remove the usb cable and put it again
then restart computer and put the usb cable ... but the computer didn't see the phone
i turn off the phone, it turn on automaticaly with a nice logo with a phone and a computer... like the phone wana tell me : "You dumb idiot, you bricked me"
I was near to be killed (its my wifes mobile, not mine) but then i tried to return into download mode and it worked and lucky the computer saw the phone
ps: i did this night, when my wife was asleep, so she didn't noticed, but if she noticed or if it was bricked ... well i guess she would kicked my ass and i would be 500box poorer
Well i rebooted today and when i turned the phone back omn i kept getting android.process.acore has stopped working over and over again so i cannot use my phone.
I tried booting the phone to recovery but it just freezes on the LG logo i help down the down volume button and held the power button to do this, i installed clockworkmod using the rom manager and it worked fine then why isnt it working now wtf use is a recovery if it doesnt work when its needed.
I was using the stock rom v10d.
Ok just as i posted that i managed to get into the recovery but there isnt much i can do to fix an issue that came from absolutely no where, i tried clearing the dalvik cache and fixing permissions and then rebooted and now i dont get that process.acore force close but now there is no writing on any of my menu options at all my icons look wrong and also have no writing on them.
Well, if any attempt for recovering the phone the working state fails, you should be able to download a program called nvflash and flash original rom again Just look around here, you'll find everything you need
yeah try this here, think it fixes 99.9% of problems
http://forum.xda-developers.com/showthread.php?t=1007825&highlight=nvflash
Try the wipe data option in CWM.
Rusty! said:
Try the wipe data option in CWM.
Click to expand...
Click to collapse
That wipes the rom doesnt it? how would that help?
I used smartflash and flashed the stock rom again. Not sure if i should root again error like this happened on my old htc dream only after root. All i wanted with root was to remove some of the crap lg apps like car home the weather thing that keeps connecting online without asking me and to install ad free to save bandwidth but noooo phone must have the equivalent of a bsod and die.
No, it wipes /data
eraldo said:
Well i rebooted today and when i turned the phone back omn i kept getting android.process.acore has stopped working over and over again so i cannot use my phone.
I tried booting the phone to recovery but it just freezes on the LG logo i help down the down volume button and held the power button to do this, i installed clockworkmod using the rom manager and it worked fine then why isnt it working now wtf use is a recovery if it doesnt work when its needed.
I was using the stock rom v10d.
Click to expand...
Click to collapse
just like few others said use nvflash. also be careful what you freeze or root uninstall. The lg crap u may think u don't need might be a hooked to the kernel or may have a dependent process.
just flash your rom again wouldve been an easier fix i guess.
eniux said:
just flash your rom again wouldve been an easier fix i guess.
Click to expand...
Click to collapse
I used smartflash and flashed the stock rom again. Not sure if i should root again error like this happened on my old htc dream only after root. All i wanted with root was to remove some of the crap lg apps like car home the weather thing that keeps connecting online without asking me and to install ad free to save bandwidth but noooo phone must have the equivalent of a bsod and die.
Click to expand...
Click to collapse
If you read my post you would have read thats exactly what i did, i just wanted to avoid doing that because id lose all my data and i did...
Hello!
I know that I should have done a lot more research before jumping in but here is what happened. I have also looked everywhere in the captivate forums with no luck. I upgraded to stock Gingerbread from Froyo a while back, yesterday I decided that I wanted to root, which I accomplished with Odin. The rooting went just fine, after that I wanted to flash ICS Slim onto my phone, which I soon realized I needed clockworkmod recovery for. After research found out that it doesn't work using ROM manager so I followed a guide to install it and here is where things went sour, following the guide I installed Hardcore’s SpeedMod Kernel it rebooted and it started normally, passing the AT&T bootscreen but now I am completely stuck on the screen after saying "GALAXY S SGH-l897" and on bottom "SAMSUNG". I am able to access the downloading screen and I just do not want to do anymore damage than I have already.
TL;DR: I'm stuck on boot after installing Hardcore's speedmod kernal, able to get on download screen, don't want to do anymore damage. Long story short, what can I do to repair my phone to a usable state?
Google "Flash ClockworkMod Recovery to Samsung Captivate" 3rd link down to see the guide that I used.
Thank you for taking the time to help!
I think hardcore speed mod kernel is for froyo/eclair that's why you're boot looping, but clockwork mod should work. Try using the three button combo to get into recovery and flash whatever captivate ICS ROM you chose, assuming you have the file in your internal SD.
Sent from my SGH-I897 using XDA
thanks for the reply, unfortunately I don't have any ROM on my internal at all, is there a way to flash a ROM from odin or another software? Or do I have to use the clockworkmod recovery to flash it on?
You can mount USB storage from recovery, so transfer the ROM to your sd card that way
Sent from my ICS Samsung Captivate
Edit: removed cause you beat me to it
Yes, there is a list of stock Odin one click packages in the development forum stickies.
Sent from my SGH-I897 using XDA
I am trying to mount the USB Mass Storage from ClockworkMod Recovery v2.5.1.0, but nothing will appear onto my computer, if I could get this to mount could I flash 2.3.5 using Kies Mini? Would the wipe data/factory reset help me here?
Try reinstalling samsung drivers to get your phone recognized. Since you're on 2.3.5 already, Kies will not let you re-download because it assumes you're on the latest firmware already. Use the Odin one click package. Or heimdall one click.
Don't rush. If you're still unsure keep searching. Read thoroughly so errors won't happen
Sent from my SGH-I897 using XDA
No wiping will not help you lol. Its better to flash back to 2.3.5 and start fresh.
Sent from my SGH-I897 using XDA
Thanks for all of the help! I was finally able to mount the phone and transfer the rom, installed it after with little trouble.
Sent from my SGH-I897 using XDA
I've got the same problem with my phone, but I arrived there thru different means.. I used an app called Kernel Manager Light, and believe I tried flashing something called like Fastloader, or Fast boot loader.. something.. anyways, looked good for a minute, while it flashed it, then rebooted my phone & since then, it doesn't load past a screen that reads "GALAXY S" then smaller and below it "SGH-I897".. then across the bottom, "SAMSUNG".. Totally stuck there, for DAYS. I've been reading these forums for what seems like ever, and this is the closest scenario I've found to my own situation.
I can't get my phone into download mode no matter what I do. I can't get into it thru ADB. All I get is that screen.
In ADB, when I type C:/ADB devices, it will sometimes recognize my device (tho more often than not it won't) and even whwn it does, as soon as I try to access my phone thru ADB, it just freezes up too.. I hit enter, and the cursor drops down to the next line, but nothing ever happens from there.
Someone please help..?
JH480 said:
I've got the same problem with my phone, but I arrived there thru different means.. I used an app called Kernel Manager Light, and believe I tried flashing something called like Fastloader, or Fast boot loader.. something.. anyways, looked good for a minute, while it flashed it, then rebooted my phone & since then, it doesn't load past a screen that reads "GALAXY S" then smaller and below it "SGH-I897".. then across the bottom, "SAMSUNG".. Totally stuck there, for DAYS. I've been reading these forums for what seems like ever, and this is the closest scenario I've found to my own situation.
I can't get my phone into download mode no matter what I do. I can't get into it thru ADB. All I get is that screen.
In ADB, when I type C:/ADB devices, it will sometimes recognize my device (tho more often than not it won't) and even whwn it does, as soon as I try to access my phone thru ADB, it just freezes up too.. I hit enter, and the cursor drops down to the next line, but nothing ever happens from there.
Someone please help..?
Click to expand...
Click to collapse
Might want to get a $5.00 jig its saved my ass whenever I brick
Sent From My ICS Cappy Using Tapatalk 2
Stuck on bootscreen
!!! HELP !!! I'm very wet behind the ears when it comes to this!!! HENSE my username. this started after connecting my cap. to a pc with intentions of exporting some pics. that initial (1st) and Only pc notification about detecting a usb device, my cousin sitting down at the monitor clicked outside the bubble message. Now from this point on which was several attempts i would get could recognize device msg. I did not know this was gonna be the results, i can actually remember noticable gliches and flaws progressively worse and worse. icons looking like they had a bulb burning out, awful lag in dialer and or any commands. I know now after reading similar posts my attempts to back-up,recover, i did several restore sessions,wiped data & system in a last ditch effort to get my phone back! i was on the road out of my state. not a comforting situation. I'D REALLY APPRECIATE THE HELP! I'M LEARNING AS I CRAWL ALONG HERE, WITH THAT BEING SAID I'M NOT FAMILIAR WITH ALOT OF THE LINGO! symbols , abbreviations , etc:crying:
Ur post is confusing...
What firmware are u on -- Eclair, Froyo, Gingerbread ??
Did u get ur pics copied off of the phone and to the pc. Under the Settings in ur phone is a USB connection setting to select for when u want to transfer stuff to ur pc.
If ur phone is still jacked up from the multiple backup and restores u did, then u may just have to do a Factory Reset from the Settings menu to get things back to normal...but do understand that that means all ur pics and other stuff will get erased, etc.
If the Factory Reset doesn't work, then I would say get into download mode and flash a Stock firmware (GB 2.3.5 i897ucKK4 being the latest official) and then proceed forward from there however u want.
See the stickied threads in the Q &A and Dev forums for help with flashin to Stock and Dev Roms.
Sent from my SGH-I897 using xda premium
Hi I hope someone can help me as i'm a little stuck how to proceed....
Basically I purchased a new P7310 tablet 2 days ago with the idea of installing lovely JellyBean.
I firstly 'Rooted' the following the instructions on http://forum.xda-developers.com/showthread.php?t=1406137 and then installed and run 'Superuser' without problems.
Next I installed 'Titanium Backup Root' and 'RomManager from ClockWorkMod', I run Titanium Backup Root and carried out a full system and apps backup successfully.
Next I connected my tablet to my Windows PC and downloaded the latest two ROM zip files from http://forum.xda-developers.com/showthread.php?t=1777398 and copied them to the Root of my SDcard.
I then disconnected my tablet and clicked the 'RomManager' app, once opened I clicked on the 'Boot in Recovery' button and a message appeared saying it needs to install the Recovery Manager, so I clicked OK. Next a success message appear saying it installed OK. So I decided to click the 'Backup ROM' button before I started just to be safe but the tablet switched off... black screen, it then loaded up but the Samsung logo flash up then disappeared.
Now If I try to power on the tablet I just get to the logo then powers off, if I try to boot into recovery mode it displays the two icons on the screen ok but selecting the left icon (with mini android character) it powers off. If I select the other green icon it shows me a message about installing custom roms and asks me to connect the tablet to a USB... followed by asking about 'odin3'?
I'm totally confused what I can do now, as I say I haven't actually got to the point of installing the JelyBean Rom, I just wanted to make a few backups first.
Any help much appreciated..thanks.
From further investigation I think I have soft bricked my tab :crying:
Now trying to find out how I might be able to fix it, found this post which I really hope will help me - http://forum.xda-developers.com/showthread.php?t=1133590
Any help with trying to fix my tab would be great.. thanks.
Fixed it thanks to this forum :victory:
Encase anyone else has the same issue I just downloaded the original ROM file for my UK P7310 (P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5) which was approx 600MB (once extracted to desktop) from http://forum.xda-developers.com/showthread.php?t=1582943
And followed the screen shot instructions further down the thread from user 'suwandiapr' which informed me which options to have selected when runing the 'Odind3 v1.85' application.
The whole process took around 10 minutes to complete.
Sounds like ROM Manager screwed you. This is why I'm not a big fan of these Play Store release ROM/recovery installers. You can't test on every device, therefore there are going to be issues and some people are going to end up with bricks. Sure, they're convenient, and they work most of the time, but when they don't work, it has the potential to be catastrophic.
IMO, stick with flashing things through working recovery (or Odin the first time).
EDIT: Also, glad you're back up and running.
had same problem with p7300 after Rom Manager.
now using cwm for total backups and 'my backup' for applications when moving between different roms.
I'll second everything said. Always use a recovery to flash a rom. Never rom manager or other such things i hard bricked my i727 using goo manager. Don't trust the rom either rom manager or goo manager say are compatible with you device. Pretty sure my hard brick was from a gapps goo manager said was compatible with the rom. Check xda and what others have said works
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
The best option to flash any rom is from the cwm recovery, unless its a stock rom and u want to use Odin from dl mode. Also, some versions of cwm recovery are deemed dangerous for ics. Pls visit tracids thread in development for details.
HI XDA
I got this sgh-t599 tmobile phone yesterday. (didn't realize it was rooted) messed around/did factory reset without backup.
now im stuck in CWM recovery 6.0.3.6, Ive spent several hours readind and trying to fix this with no luck.
I tried using adb, kies etc. none can detect device. device drivers are installed(tried 'have disk'), it shows Samsung under device manager.
I can device list in adb and shows the numbers and "recovery" but when i try to use commands it says "waiting for device" or something.
from what i read, i need unsecure boot to restore firmware. where can i get this and how do i do it pls.
i have no mount usb option in cwm, when i try to recover/update from cwm it says aborted. in adb im able to reboot the phone with the commands but always reboots to cwm recovery or waiting for device. any help pls. i may have access to another rooted t599 if i am able to backup and recover it to this phone?:crying:
do you think local phone repair shop can fix this back to stock or rooted and for how much?
momsbest said:
HI XDA
I got this sgh-t599 tmobile phone yesterday. (didn't realize it was rooted) messed around/did factory reset without backup.
now im stuck in CWM recovery 6.0.3.6, Ive spent several hours readind and trying to fix this with no luck.
I tried using adb, kies etc. none can detect device. device drivers are installed(tried 'have disk'), it shows Samsung under device manager.
I can device list in adb and shows the numbers and "recovery" but when i try to use commands it says "waiting for device" or something.
from what i read, i need unsecure boot to restore firmware. where can i get this and how do i do it pls.
i have no mount usb option in cwm, when i try to recover/update from cwm it says aborted. in adb im able to reboot the phone with the commands but always reboots to cwm recovery or waiting for device. any help pls. i may have access to another rooted t599 if i am able to backup and recover it to this phone?:crying:
do you think local phone repair shop can fix this back to stock or rooted and for how much?
Click to expand...
Click to collapse
You must have format system or something. A factory reset wipes cache and data, nothing else. There should be a homebrew odin-file somewhere in these t599 threads.
tys0n said:
You must have format system or something. A factory reset wipes cache and data, nothing else. There should be a homebrew odin-file somewhere in these t599 threads.
Click to expand...
Click to collapse
phone was rooted and had superuser etc on it. I didn't know about rooting, I did factory reset from the main menu which im pretty sure is what caused this. before that I was able to look through its apps where I saw the superuser,terninal and others, once factory reset it rebooted to cwm recovery and stuck there. there was no backup or side sdcard. only realized it was rooted after saw the cwm and stuck
odin doesnt detect phone either, downloaded/installed universal drivers still no go.
main issue is not being to able enable usb debug/download while still in cwm
repair shop says $30, about to run there
i caused my friends sgh-t599 to do that
So... This might be late.... But I'm going to postthis for others .... So I was looking for ever for a way to unbrick his phone... Then hope Finley came .. After I read hard enough .. And came across a post for a stock pre-rooted tar file to be flashed with Odin...
^Odin V3.09
http://odindownload.com/
^PreRooted Stock ROM for SGH-T599
https://docs.google.com/uc?id=0B8oW93h4qD3-X3UxdFl5VlhzZVU&export=downloads
° so to unbrick you're SGH-T599 after downloading the two files above
1§t: put sgh-t599 in download mode(vol.down+home+power).... Plug in and press vol. Up
2ed: Open odin 3.09.. Wait for added to show up (mite have to unplug then re plug the phone)..
Click on AP and find 0B8oW93h4qD3-X3UxdFl5VlhzZVU.tar
........ It should take awhile ......
Then after you're phone boots up... An after you set everything up
.... GET two apps from the play store
° install one of the superuser apps
° then get a root checker as app
^EXTRAS(maybe needed)
°one of BusyBox apps from play store
° SU checker app from the play store
HOPE EVERYTHING WORKS WELL FOR ANYONE WHO NEEDS THIS TO ATTEMPT TO UNBRICK YOU'RE DEVICE
....
PS IM NOT RESPONSIBLE IF ANYTHING ELSE GOES WRONG
....
LAST BUT NOT LEAST I DID NOT MAKE THIS ROM... I JUST FOUND IT AND CAME UP WITH A EASY TO DO TUTORIAL
tnx so much
Thank you very much.I looked for a stock rom/recovery image.etc.took me a while till I came across with this .it was a metro pcs/exhibit sgh_t599.I bricked it playing with it.u no.uninstalling unnecessary apps.lol.so my wife got mad.cause is not the first one.
Also had an alcatel,galaxy s3,etc.bricked of course.but thanks for the files.God bless
help
Hello guys , i got a very serious problem here . i'm using samsung galaxy exhibit t599 .
The problem is , why is the signal of my phone always EDGE .
if i setting to Wcdma only (3G) , the signal is gone ,it just like the provider isn't supporting 3G , but it is support . I already trying another provider , the same thing always happen.
pleasee help me , do u guys have any suggestion about what i am suppose to do ?
thank you.
shorty9210 said:
So... This might be late.... But I'm going to postthis for others .... So I was looking for ever for a way to unbrick his phone... Then hope Finley came .. After I read hard enough .. And came across a post for a stock pre-rooted tar file to be flashed with Odin...
^Odin V3.09
http://odindownload.com/
^PreRooted Stock ROM for SGH-T599
https://docs.google.com/uc?id=0B8oW93h4qD3-X3UxdFl5VlhzZVU&export=downloads
° so to unbrick you're SGH-T599 after downloading the two files above
1§t: put sgh-t599 in download mode(vol.down+home+power).... Plug in and press vol. Up
2ed: Open odin 3.09.. Wait for added to show up (mite have to unplug then re plug the phone)..
Click on AP and find 0B8oW93h4qD3-X3UxdFl5VlhzZVU.tar
........ It should take awhile ......
Then after you're phone boots up... An after you set everything up
.... GET two apps from the play store
° install one of the superuser apps
° then get a root checker as app
^EXTRAS(maybe needed)
°one of BusyBox apps from play store
° SU checker app from the play store
HOPE EVERYTHING WORKS WELL FOR ANYONE WHO NEEDS THIS TO ATTEMPT TO UNBRICK YOU'RE DEVICE
....
PS IM NOT RESPONSIBLE IF ANYTHING ELSE GOES WRONG
....
LAST BUT NOT LEAST I DID NOT MAKE THIS ROM... I JUST FOUND IT AND CAME UP WITH A EASY TO DO TUTORIAL
Click to expand...
Click to collapse
Can i use this on SGH-T599V?
Jay_SEAN said:
Can i use this on SGH-T599V?
Click to expand...
Click to collapse
Awe not going to lie but it's been a long time sense then lol but I have had success flashing ROMs from different veriants of models but to be safe I would download this specific one( http://d-h.st/Z5c )just to be safe an then fallow my steps.
Good luck hope it helps