Database Develop

[Tutorial][Rescue]Sprint HTC One users that flash GSM roms on their CDMA devices.

Hello XDA,
I have noticed a lot of Sprint(CDMA) HTC One users are flashing GSM roms and soft bricking their devices lately.
I have personally rescued 50+ devices in the past couple weeks so I'm posting this guide in hopes that it will save some headaches and stress for Sprint users.
These instructions are for the Sprint variant only
You will need to be unlocked and have TWRP or CWM installed for this to work
1. Follow this guide Guide - Get s-off on 1.31 HTC One (Sprint) Update:
You will get a failed warning after issuing the echo blah blah command this is normal and nothing to be worried about and after the echo command type exit to exit the adb shell and continue.
2. Get the RUU HERE click the first link in the thread(extract it to your desktop/open it and click setup it will scan your device,go thru the various screens reading the warnings and checking the boxes, once it starts it will take 10-20 minutes to complete) once it's done you will be back to completely stock.
Device not recognized?
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Latest HTC Drivers
Optional:
Use revone to gain s-off (if you go with this option once you are s-off you won't need to use HTC-Dev to unlock your bootloader again because revone does it for you) A sidenote about revone it will fail several times just press the UP arrow on your keyboard to issue the same command and press enter.Watch the cmd window for instructions to reboot and continue.
or flash a Sprint rom from the Sprint forum
Thanks to Indirect for his Guide
Thanks to OMJ for the RUU
Thanks to Revolutionary dev team for Revone
If you need assistance I'll be happy to help.
**NOTE** this guide will be obsolete once Sprint/HTC pushes an OTA and the hboot changes.
Updated 4.3/4.4 Guide found HERE

no adb
bigdaddy619 said:
Hello XDA,
I have noticed a lot of Sprint(CDMA) HTC One users are flashing GSM roms and soft bricking their devices lately.
I have personally rescued 15-30 devices in the past couple weeks so I'm posting this guide in hopes that it will save some headaches and stress for Sprint users.
These instructions are for the Sprint variant only
You will need to be unlocked and have TWRP or CWM installed for this to work
1. Follow this guide Guide - Get s-off on 1.31 HTC One (Sprint) Update:
You will get a failed warning after issuing the echo blah blah command this is normal and nothing to be worried about and after the echo command type exit to exit the adb shell and continue.
2. Get the RUU here click the first link in the thread(extract it to your desktop/open it and click setup it will scan your device,go thru the various screens reading the warnings and checking the boxes, once it starts it will take 10-20 minutes to complete) once it's done you will be back to completely stock.
Optional:
Use revone to gain s-off (if you go with this option once you are s-off you won't need to use HTC-Dev to unlock your bootloader again because revone does it for you) A sidenote about revone it will fail several times just press the UP arrow on your keyboard to issue the same command and press enter.Watch the cmd window for instructions to reboot and continue.
or flash a Sprint rom from the Sprint forum
Thanks to Indirect for his Guide
Thanks to OMJ for the RUU
Thanks to Revolutionary dev team for Revone
If you need assistance I'll be happy to help.
**NOTE** this guide will be obsolete once Sprint/HTC pushes an OTA and the hboot changes.
Click to expand...
Click to collapse
I cant access adb from recovery even with the sideload feature and have no os to boot to this Is what I get for variables
C:\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4327mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0
all: Done!
please help and i would rather not get s off i dont need a hard brick

Please remove your serial number and imei and meid
Uninstall everything HTC reboot your PC then reinstall the drivers and follow step 1 then run the RUU then you're done
Sent from my ElipticNexus7

I have been thinking about putting together a guide, but I was lazy. Glad someone finally did. Thanks!

3340 49969225
replying here so other's can find it. I was getting the "remote: 12 signature verify fail" issue when I would try to RUU on sprint HTC one and this was the fix. I honestly think the current stable of cyanogen is to blame. Hopefully this will help others find this thread as it was a life saver.

Uninstall SuperSU/Full Unroot
bigdaddy619 said:
Hello XDA,
I have noticed a lot of Sprint(CDMA) HTC One users are flashing GSM roms and soft bricking their devices lately.
I have personally rescued 15-30 devices in the past couple weeks so I'm posting this guide in hopes that it will save some headaches and stress for Sprint users.
These instructions are for the Sprint variant only
You will need to be unlocked and have TWRP or CWM installed for this to work
1. Follow this guide Guide - Get s-off on 1.31 HTC One (Sprint) Update:
You will get a failed warning after issuing the echo blah blah command this is normal and nothing to be worried about and after the echo command type exit to exit the adb shell and continue.
2. Get the RUU here click the first link in the thread(extract it to your desktop/open it and click setup it will scan your device,go thru the various screens reading the warnings and checking the boxes, once it starts it will take 10-20 minutes to complete) once it's done you will be back to completely stock.
Optional:
Use revone to gain s-off (if you go with this option once you are s-off you won't need to use HTC-Dev to unlock your bootloader again because revone does it for you) A sidenote about revone it will fail several times just press the UP arrow on your keyboard to issue the same command and press enter.Watch the cmd window for instructions to reboot and continue.
or flash a Sprint rom from the Sprint forum
Thanks to Indirect for his Guide
Thanks to OMJ for the RUU
Thanks to Revolutionary dev team for Revone
If you need assistance I'll be happy to help.
**NOTE** this guide will be obsolete once Sprint/HTC pushes an OTA and the hboot changes.
Click to expand...
Click to collapse
I have a brand new Sprint HTC One. Never even registered it with Sprint. I unlocked it to change carriers, Twerp is installed, Still using stock rom 1.29 version, Had SuperSu 1.63 or 1.65 installed. Today I uninstalled SuperSU as the option said "complete clean to unroot". Twerp still will not flash the OTA 1.31 version. When I installed TWERP also did a backup of the original recovery in the device. How do I proceed from here?.

upowersystems said:
I have a brand new Sprint HTC One. Never even registered it with Sprint. I unlocked it to change carriers, Twerp is installed, Still using stock rom 1.29 version, Had SuperSu 1.63 or 1.65 installed. Today I uninstalled SuperSU as the option said "complete clean to unroot". Twerp still will not flash the OTA 1.31 version. When I installed TWERP also did a backup of the original recovery in the device. How do I proceed from here?.
Click to expand...
Click to collapse
You have to re-lock to accept the 1.31 update

relock
bigdaddy619 said:
You have to re-lock to accept the 1.31 update
Click to expand...
Click to collapse
When I attempt to re lock the bootloader and type fastboot oem lock it errors saying faatboot is not a recognized internal or external command operable program or command
thanks

upowersystems said:
When I attempt to re lock the bootloader and type fastboot oem lock it errors saying faatboot is not a recognized internal or external command operable program or command
thanks
Click to expand...
Click to collapse
You are not in the correct folder use android-sdk/platform-tools

fastboot folder
bigdaddy619 said:
You are not in the correct folder use android-sdk/platform-tools
Click to expand...
Click to collapse
Ha you are correct sir! I was right clicking on the wrong folder. Both of the same name! Got to change that! Thanks Locked the bootloader. It rebooted. Thats all I need, can update now? Dont need to mess with Twerp recovery?
Thanks

upowersystems said:
Ha you are correct sir! I was right clicking on the wrong folder. Both of the same name! Got to change that! Thanks Locked the bootloader. It rebooted. Thats all I need, can update now? Dont need to mess with Twerp recovery?
Thanks
Click to expand...
Click to collapse
I have never personally taken an OTA so not really sure of the correct procedure

What if the message in bootloader mode shows relocked . S- on and i recieve an ota 4.3 update and it does restart but in only in fast boot. Recovery option not accessible.
Sent from my HTCONE using xda app-developers app

Not Updating
bigdaddy619 said:
I have never personally taken an OTA so not really sure of the correct procedure
Click to expand...
Click to collapse
It did not work. I tried the OTA it reboots to the Bootloader and has no option to update. The message is "Tampered" "Relocked" "Security Warning"
Is an OTA important. Will I be able to upgrade to 4.3 without this OTA?
---------- Post added at 11:40 AM ---------- Previous post was at 11:16 AM ----------
upowersystems said:
It did not work. I tried the OTA it reboots to the Bootloader and has no option to update. The message is "Tampered" "Relocked" "Security Warning"
Is an OTA important. Will I be able to upgrade to 4.3 without this OTA?
Click to expand...
Click to collapse
MeetBala said:
What if the message in bootloader mode shows relocked . S- on and i recieve an ota 4.3 update and it does restart but in only in fast boot. Recovery option not accessible.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Mine also boots directly into fastboot. Recovery option does not open when initiated

Just wanted to say thanks for making this guide.
Soft bricked my One a couple weeks ago and fixed it using this thread.

With s off I can flash any gsm ROM? Without bricking?
Sent from my HTCONE using XDA Premium 4 mobile app

pyrobo0by said:
With s off I can flash any gsm ROM? Without bricking?
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Only if it has Sprint support

[Solved] Soft Brick HTC One (M7ul) Recovery won't boot

Hi Guys,
I am in a bit of a pickle.
I decided to Install Cyanogenmod today to see what the fuss was all about - I managed to do this successfully but then after using it for a while actually didn't like it and preferred using Sense 5.
I tried to flash stock to my HTC One (UK M7ul) via the RUU method but this failed twice.
The phone is currently will only boot into Bootloader regardless of what I try so will not even boot into Cyanogenmod at all, when ever i click recovery as CWM was installed the phone will flash for a second saying starting recover and then go straight back into bootloader.
I am currently on Bootloader 1.55 with S-On - Phone is locked and will not allow me to unlock it.
I really need some help to get my phone fully functional again on HTC Sense Stock Firemware.
CID: HTC__001
MID: PN0710000
C:\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s

Davidpearl said:
Hi Guys,
I am in a bit of a pickle.
I decided to Install Cyanogenmod today to see what the fuss was all about - I managed to do this successfully but then after using it for a while actually didn't like it and preferred using Sense 5.
I tried to flash stock to my HTC One (UK M7ul) via the RUU method but this failed twice.
The phone is currently will only boot into Bootloader regardless of what I try so will not even boot into Cyanogenmod at all, when ever i click recovery as CWM was installed the phone will flash for a second saying starting recover and then go straight back into bootloader.
I am currently on Bootloader 1.55 with S-On - Phone is locked and will not allow me to unlock it.
I really need some help to get my phone fully functional again on HTC Sense Stock Firemware.
CID: HTC__001
MID: PN0710000
C:\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVE
(bootloader) imei: REMOVE
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
good thing you posted a ''fastboot getvar all'' but never post IMEI and SN, remove them from your post.
To restore the phone back to stock with a ruu, you need to be s-off to downgrade hboot to 1.44. So you will have to unlock bootloader from htcdev, install twrp custom recovery, flash arhd 31.6, s-off with rumrunner, downgrade hboot and then run the ruu.
all details can be found in this guide.

flash twrp recovery, and then type fastboot erase cache
Then try booting into recovery, and adb push this rom.. http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/

Thanks for the help guys - I have issues with my computer not recognising my phone.
I have managed to unlock it again and am trying to get either one of the two methods you guys suggested to work.

The adb push command or side load is not working in TWRP.
Dunno how I am going to get this file on there?

Davidpearl said:
The adb push command or side load is not working in TWRP.
Dunno how I am going to get this file on there?
Click to expand...
Click to collapse
usb otg cable
copy the zip @SaHiLzZ linked to a usb drive then connect to phone via usb otg cable and mount it in twrp

alray said:
usb otg cable
Click to expand...
Click to collapse
Guess I am going to have to make one.
Female USB A to Micro USB right?

Davidpearl said:
Guess I am going to have to make one.
Female USB A to Micro USB right?
Click to expand...
Click to collapse
it cost like 2$ on ebay
and yed you can make one if you don't care cutting 2 usb cables
dont forget pin 4 of micro connector must be connected to gnd

GOT IT WORKING!!!!! I reinstalled CWM and that worked via side loading the image.
up and running all is right with the world!

IS there anything I need to do now as matter of good practie?
The bootloader is currently still inlocked - S-On is still activated and I still have the *tampered* logo.
Do I need to A) Lock the boot loader?
Should i turn S-Off?
How do I get rid of the tampered logo so its fully stock and I can get it repaired from HTC again?

Davidpearl said:
IS there anything I need to do now as matter of good practie?
The bootloader is currently still inlocked - S-On is still activated and I still have the *tampered* logo.
Do I need to A) Lock the boot loader?
Should i turn S-Off?
How do I get rid of the tampered logo so its fully stock and I can get it repaired from HTC again?
Click to expand...
Click to collapse
detail on how to go back 100% stock without tempered flag can be found in the guide in linked to you i my previous post

alray said:
detail on how to go back 100% stock without tempered flag can be found in the guide in linked to you i my previous post
Click to expand...
Click to collapse
I get this error when trying to S-Off my device? what do i need to do?
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (36/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (37/120)
must ferment longer...
ERROR: looks like device is not rooted AND lacks an unsecure kernel. su or FU!!
!
Press ENTER to exit

Have you tried rooting it? Watch the screen, it will ask for su permissions

Seems that root is missing. Install SuperSu

Uxepro said:
Seems that root is missing. Install SuperSu
Click to expand...
Click to collapse
I rooted it today and got all the way to the last step and its saying this:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (34/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (36/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
pouring (1)...........
.........................................
..........
pouring (2)...........
..................................
.
pouring (3)...........
....................................
pouring (4)...........
...................................
unfortunately this isn't going to work out with your configuration. you have 2
options:
1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner
(preferred and most reliable method).
2.) flash a different rom.
NOTE: No amount of messing around with su binaries and apk's is going to fix thi
s issue for you!!!.
Better luck next time!!!!bye
Press ENTER to exit
What do I do?

Davidpearl said:
I rooted it today and got all the way to the last step and its saying this:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (34/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (36/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
pouring (1)...........
.........................................
..........
pouring (2)...........
..................................
.
pouring (3)...........
....................................
pouring (4)...........
...................................
unfortunately this isn't going to work out with your configuration. you have 2
options:
1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner
(preferred and most reliable method).
2.) flash a different rom.
NOTE: No amount of messing around with su binaries and apk's is going to fix thi
s issue for you!!!.
Better luck next time!!!!bye
Press ENTER to exit
What do I do?
Click to expand...
Click to collapse
Tried again and got this:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (34/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (35/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
pouring (1).........
...............................
pouring (2).........
..................................
pouring (3).........
.................................
pouring (4).........
.....................................
pouring (5).........
...................................
pouring (6).........
...................................
pouring (7).........
....................................
pouring (8).........
.........................................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit

SaHiLzZ said:
Have you tried rooting it? Watch the screen, it will ask for su permissions
Click to expand...
Click to collapse
Uxepro said:
Seems that root is missing. Install SuperSu
Click to expand...
Click to collapse
Hey guys, any idea?
Do I need to install a Custom Rom to unlock S-Off and then re-flash Stock firmware?

Davidpearl said:
Hey guys, any idea?
Do I need to install a Custom Rom to unlock S-Off and then re-flash Stock firmware?
Click to expand...
Click to collapse
did you flash an unsecured kernel?
"(bootloader) version-main: 3.62.401.1" or just install ARHD 31.6 http://forum.xda-developers.com/showthread.php?t=2183023 which has all the prerequisites.
if you're having problems with Windows, try Ubuntu Live USB: http://forum.xda-developers.com/showthread.php?t=2606577

nkk71 said:
did you flash an unsecured kernel?
"(bootloader) version-main: 3.62.401.1" or just install ARHD 31.6 http://forum.xda-developers.com/showthread.php?t=2183023 which has all the prerequisites.
if you're having problems with Windows, try Ubuntu Live USB: http://forum.xda-developers.com/showthread.php?t=2606577
Click to expand...
Click to collapse
I am using the Guru_Reset_3.62.401.1 from the link - I assume that this Stock rom is secured?
I could flash ARHD 51.0 and I may even stay on that if the perform is much superior..... at least If I S-Off on that I can fully stock if there are any issues.
ARHD 51 is basically Kitkat with Sense on it right?
Thanks for all your help it is greatly appreciated.

Davidpearl said:
I am using the Guru_Reset_3.62.401.1 from the link - I assume that this Stock rom is secured?
I could flash ARHD 51.0 and I may even stay on that if the perform is much superior..... at least If I S-Off on that I can fully stock if there are any issues.
ARHD 51 is basically Kitkat with Sense on it right?
Thanks for all your help it is greatly appreciated.
Click to expand...
Click to collapse
Use ARHD 31.6 (because it's inline with your firmware 3.62.401.1), then use rumrunner to get S-Off

RELOCKED bootloader ! Getting RUU Error 155

I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.24.3263.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.531.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4285mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
Tried to Downgrade hboot to original 1.44 but failed .
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot flash zip orig_hboot
_1.44.0000_M7_RUUmode.zip
target reported max download size of 1514139648 bytes
sending 'zip' (486 KB)...
OKAY [ 0.234s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.281s
Click to expand...
Click to collapse
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?

Divyashwar said:
I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
Tried to Downgrade hboot to original 1.44 but failed .
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?
Click to expand...
Click to collapse
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)

Mutasek24 said:
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)
Click to expand...
Click to collapse
Yeah ! I just did this bro ! .
fastboot flash unlocktoken Unlock_code.bin
Now, Bootloader is unlocked and have recovery TWRP.
Going for S-OFF now.
soon update more...
Thank you

Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Thank you

Divyashwar said:
Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Click to expand...
Click to collapse
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/

nkk71 said:
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/
Click to expand...
Click to collapse
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal

Divyashwar said:
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal
Click to expand...
Click to collapse
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?

nkk71 said:
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?
Click to expand...
Click to collapse
Thank you !
Firewater works
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb push firewater /data/loca
l/tmp
3795 KB/s (4347896 bytes in 1.118s)
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb shell
[email protected]:/ # su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
==================== firewater S-OFF 0.4.0 ==============================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs.posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
that firewater was good and hot, throwing out the empties
=========================================================================
==== device is now s-off. Don't forget to send us all your money =====
=========================================================================
=============== paypal: [email protected] =======================
=========================================================================
[email protected]:/ # Yes
sh: Yes: not found
127|[email protected]:/ #
Click to expand...
Click to collapse

Divyashwar said:
Thank you !
Firewater works
Click to expand...
Click to collapse
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!

nkk71 said:
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!
Click to expand...
Click to collapse
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?

Divyashwar said:
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?
Click to expand...
Click to collapse
If you're going for a downgrade RUU.EXE then you need to downgrade hboot separately first, if you are on hboot 1.55+
May I recommend you take a look at my guide on how to return to stock: http://forum.xda-developers.com/showthread.php?t=2541082
(in particular the FAQs, especially if you are on Win8.1)
If you're keeping the phone, you can skip the LOCKED part and the S-On part (those are for people returning for warranty, or selling the phone).
Let me know if you have questions
Cheers

Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA355W908122
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.

RobbieKeane said:
Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.
Click to expand...
Click to collapse
instructions
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse

clsA said:
instructions
Click to expand...
Click to collapse
Thank you very much I will try and update sir.
My hope come again
[email protected] InsertCoin ADDICT [email protected]~
We can do anything (If we want :3)

I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?

RobbieKeane said:
I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?
Click to expand...
Click to collapse
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76

clsA said:
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76
Click to expand...
Click to collapse
Thank you for your suggest but now I cannot install any rom or zip file in TWRP it's say "Failed to install".
I don't know how to fixed it and how to diagnose or debug what happen T__T.

[Q] Many problems with S-OFF Help :(

Hello, i make new topic with more information about my problem with S OFF.
I got HTC One (int) With HBOOT 1.55 and TMOB101 CID. I tried every S OFF methods with many roms (stock and custom) and i always fail.
I tried do S OFF by firewater:
==================== firewater S-OFF 0.5.3.16 ===========================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs.posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
whelp, that bottle is empty, opening bottle 2
chugging..........
whelp, that bottle is empty, opening bottle 3
chugging..........
whelp, that bottle is empty, opening bottle 4
chugging..........
whelp, that bottle is empty, opening bottle 5
chugging..........
whelp, that bottle is empty, opening bottle 6
chugging..........
C:\Users\pawel\Desktop\ADB Drivers_Updated>
Click to expand...
Click to collapse
And Fail..
Rumrunner log:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (49/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (50/120)
must ferment longer...
chilling..................
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)..................................................
pouring (2)..................................................
pouring (3)....................................................
pouring (4)...................................................
Click to expand...
Click to collapse
Up to 10 times and error.
Im on INSERTCOIN` rom right now.
I dont now what i have to do, to got S OFF`ed. XDA HELP ME!

LisekDH said:
Hello, i make new topic with more information about my problem with S OFF.
I got HTC One (int) With HBOOT 1.55 and TMOB101 CID. I tried every S OFF methods with many roms (stock and custom) and i always fail.
I tried do S OFF by firewater:
And Fail..
Rumrunner log:
Up to 10 times and error.
Im on INSERTCOIN` rom right now.
I dont now what i have to do, to got S OFF`ed. XDA HELP ME!
Click to expand...
Click to collapse
Try ARHD 31.6
It worked twice for me...................

Just intall ARHD 31.6? No relock or smth?

lisekdh said:
just intall arhd 31.6? No relock or smth?
Click to expand...
Click to collapse
relock???? No, absolutely no

I flashed arhd 31.6 and it still S ON , firewater didnt work, rumrunner didnt work 2. I think i cant S OFF my HO.

I have TAMPERED flag, it can be problem for S OFF?

LisekDH said:
I have TAMPERED flag, it can be problem for S OFF?
Click to expand...
Click to collapse
No tampered makes no difference.. You want ARHD 31.6 not insertcoin.
Try rumrunner again. It took me 3-4 times before it worked, and please keep to one thread, making multiple threads for the same problem will get you nowhere.
Sent from my HTC One using XDA Premium 4 mobile app

Im now on stock 3.36.111.3 and i tryin

LisekDH said:
Im now on stock 3.36.111.3 and i tryin
Click to expand...
Click to collapse
i'm in the same situation, if you have good notice post it....

i tried firewater , he stops at 12 Bottles.. , im tried rumrunner pouring 10... . It`s f*** unable to S OFF my device

Make sure debugging is enabled in developer settings. And fastboot is off in power settings.
Your adb isn't working that seems to be the problem.
Do the above instructions, then type in cmd ADB DEVICES with Rom booted.
See if you get device id listed then.

Everything is good, ADB Enabled, fastboot is off, computer see my htc. I do everything what is in guide, but still nothing.

mago988 said:
i'm in the same situation, if you have good notice post it....
Click to expand...
Click to collapse
Sent from my HTC One using Xparent Skyblue Tapatalk 2
You need an insecure kernel. Stock kernel will not work. That's why you need a custom rom like ARHD

bored_stupid said:
Sent from my HTC One using Xparent Skyblue Tapatalk 2
You need an insecure kernel. Stock kernel will not work. That's why you need a custom rom like ARHD
Click to expand...
Click to collapse
Thank you so much i was trying all night to get s-off loll

it`s work 4 u? I tring ARHD 2 and still nothing. ARHD 31.6.

HTC One Telus 1.55 S-on
I'm having the same issue, rumrunner fails and after a couple times the PC drops the USB connection forcing a reboot. Unlocked but with TAMPERED flag set. Any help would be great, I hate to send it in to what I’m starting to thing may need j-tagged.
Thanks in advance!

venomate said:
I'm having the same issue, rumrunner fails and after a couple times the PC drops the USB connection forcing a reboot. Unlocked but with TAMPERED flag set. Any help would be great, I hate to send it in to what I’m starting to thing may need j-tagged.
Thanks in advance!
Click to expand...
Click to collapse
Firewater seems to be the most successful at achieving S-Off at the moment .
http://firewater-soff.com/instructions/
Sent from my HTC One using XDA Premium 4 mobile app

I try 3 times with firewater on ARHD 31.6 to day and fail..

LisekDH said:
I try 3 times with firewater on ARHD 31.6 to day and fail..
Click to expand...
Click to collapse
Post a fastboot getvar all please

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.22.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT************9
(bootloader) imei: 3******************9
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 3638mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
Click to expand...
Click to collapse
My getvar

Q: find it impossible to find the info I need.

First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?

seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
I s-off my new phone (hboot 1.44) last night with rumrunner here's the steps I took. Unlocked Bootloader - flash TWRP - Flashed ARHD 31.6 - booted up the phone and went through a quick install with no accounts setup. ran rumrunner and about 10 min later it was all done. Note .. turn off Sleep on the phone or set it to 10 min. don't leave the phone unattended on the second pour superSU ask for permission two times .. choose yes
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (10/120)
Waiting
Test 2: Booting device
Waiting for ADB (29/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (10/120)
Waiting for ADB (29/120)
must ferment longer...
chilling..................
smells lovely in here....
heh, just a shot glass for this one....
bottles are packed, here we go, shhhhhh....
pouring (1)..................................
pouring (2).................................
pouring (3)...........
Waiting for ADB (32/120)
must ferment longer...
what's that in the bottle still? rum foul, sloppy, real sloppy...
wait for it.........
yep, done. Hope you enjoyed the rum!
Don't forget to send us all your money - [email protected]
Press ENTER to exit
Click to expand...
Click to collapse
C:\fastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT34************ device
C:\fastboot>adb shell
[email protected]:/ # echo -ne '\x00' | dd of=/dev/block/mmcb
ock/mmcblk0p7 bs=1 seek=4265988
1+0 records in
1+0 records out
1 bytes transferred in 0.009 secs (111 bytes/sec)
[email protected]:/ # exit
exit
C:\fastboot>adb reboot bootloader
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT3***********
(bootloader) imei: 354**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4203mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
Click to expand...
Click to collapse
here's the files I used
TWRP 2.6.3.3 - http://techerrata.com/browse/twrp2/m7
ARHD - http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
RumRunner - http://rumrunner.us/

seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026

cr1960 said:
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026
Click to expand...
Click to collapse
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.

seshmaru said:
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.
Click to expand...
Click to collapse
see, you didn't mention anything about GPE in the OP.....

cr1960 said:
see, you didn't mention anything about GPE in the OP.....
Click to expand...
Click to collapse
What my desired outcome is shouldn't be important, I stated that I need S-OFF.
On a side note, is it possible to flash SixthSense 2.1 without S-OFF? The thread itself isn't very clear.
EDIT: Tried it and it does let you.
Anyhow, time to try rumrunner.