Database Develop

No service, No IMEI, Keep rebooting every time...

Hello to all ! I have a problem and I hope somebody could help me....; When I press Power its boot normally until the main screen with lock , the wrote NO SERVICE when I am trying to unlock it the screen become blank with green HTC on middle after a minute phone reboot itself and that is over and over again.... its like he couldn't load the system....anyway when I press the power button it says as usual in Android Power off,restart or Air plane mode and if you press air plane mode and reboot you can unlock it normally , but still no service no imei and radio-module version and keep rebooting ... All those steps where with S-on and locked bootloader... After that I disable Security (Thanks a lot to Hasoon 200) and unlock boot loader... i put about 5 customs all have the same issue except GE version it still not give imei and radio module but there is no trouble with reboot ... Can anyone help me or guide me in what direction to dig? Thanks a lot
P.S Sorry for my bad English...
P.P.S Htc ONE M7 UL PN07100 A07
Hboot 1.44
Radio 4a.13.3231.27

Horatio. said:
Hello to all ! I have a problem and I hope somebody could help me....; When I press Power its boot normally until the main screen with lock , the wrote NO SERVICE when I am trying to unlock it the screen become blank with green HTC on middle after a minute phone reboot itself and that is over and over again.... its like he couldn't load the system....anyway when I press the power button it says as usual in Android Power off,restart or Air plane mode and if you press air plane mode and reboot you can unlock it normally , but still no service no imei and radio-module version and keep rebooting ... All those steps where with S-on and locked bootloader... After that I disable Security (Thanks a lot to Hasoon 200) and unlock boot loader... i put about 5 customs all have the same issue except GE version it still not give imei and radio module but there is no trouble with reboot ... Can anyone help me or guide me in what direction to dig? Thanks a lot
P.S Sorry for my bad English...
P.P.S Htc ONE M7 UL PN07100 A07
Hboot 1.44
Radio 4a.13.3231.27
Click to expand...
Click to collapse
get S-OFF and try updating your firmware

kamilmirza said:
get S-OFF and try updating your firmware
Click to expand...
Click to collapse
I tried it gave a bootloader error and now I have TEMPERED IN bootloader menu and cannot turn s-on off(((((

Horatio. said:
I tried it gave a bootloader error and now I have TEMPERED IN bootloader menu and cannot turn s-on off(((((
Click to expand...
Click to collapse
lol dont worry about the TEMPERED
follow this guide: http://forum.xda-developers.com/showthread.php?t=2365506

TEMPERED is normal

kamilmirza said:
lol dont worry about the TEMPERED
follow this guide: http://forum.xda-developers.com/showthread.php?t=2365506
Click to expand...
Click to collapse
Cannot S-OFF it says Revone Failed Code Error =1 or segmentation fault (core dumped) ....

Horatio. said:
Cannot S-OFF it says Revone Failed Code Error =1 or segmentation fault (core dumped) ....
Click to expand...
Click to collapse
try rumrunners
follow this guide: http://forum.xda-developers.com/showthread.php?t=2488772

kamilmirza said:
try rumrunners
follow this guide: http://forum.xda-developers.com/showthread.php?t=2488772
Click to expand...
Click to collapse
Strange things most of custom roms it allow to install but official RUU denies .....

Horatio. said:
Strange things most of custom roms it allow to install but official RUU denies .....
Click to expand...
Click to collapse
get your main ver ROM from here: http://forum.xda-developers.com/showthread.php?t=2428276
flash it and then try rumrunners S-OFF using the guide i gave you before by electronical

kamilmirza said:
get your main ver ROM from here: http://forum.xda-developers.com/showthread.php?t=2428276
flash it and then try rumrunners S-OFF using the guide i gave you before by electronical
Click to expand...
Click to collapse
Tried with Guru Reset with Aroma installer same thing only when I type ./ revone -P it says segmentation fault (core dumped) ....As about Rum runner ....
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
yes
Type 'Yes' or 'No'
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (31/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (31/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
unfortunately this isn't going to work out with your configuration. you have 2
options:
1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner
(preferred and most reliable method).
2.) flash a different rom.
NOTE: No amount of messing around with su binaries and apk's is going to fix thi
s issue for you!!!.
Better luck next time!!!!bye
Press ENTER to exit

Horatio. said:
Tried with Guru Reset with Aroma installer same thing only when I type ./ revone -P it says segmentation fault (core dumped) ....As about Rum runner ....
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
yes
Type 'Yes' or 'No'
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (31/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (31/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
unfortunately this isn't going to work out with your configuration. you have 2
options:
1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner
(preferred and most reliable method).
2.) flash a different rom.
NOTE: No amount of messing around with su binaries and apk's is going to fix thi
s issue for you!!!.
Better luck next time!!!!bye
Press ENTER to exit
Click to expand...
Click to collapse
which ROM you flashed?
go into bootloader and tell me the OS
the error says that the ROM you flashed is not compatible
Sent from my HTC One using Tapatalk

kamilmirza said:
which ROM you flashed?
go into bootloader and tell me the OS
the error says that the ROM you flashed is not compatible
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks a lot .... You see My phone Is rebooting every 30 second or minute thats why rumrunner cannot run properly, But I found method Thats work )))0 I am S-off again and putting RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed and the main problem is again no service no imei reboot.....

Horatio. said:
Thanks a lot .... You see My phone Is rebooting every 30 second or minute thats why rumrunner cannot run properly, But I found method Thats work )))0 I am S-off again and putting RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed and the main problem is again no service no imei reboot.....
Click to expand...
Click to collapse
have you tried any other SIM?
why don't you try any custom ROM?
have you flashed the latest firmware?
Sent from my HTC One using Tapatalk

kamilmirza said:
have you tried any other SIM?
why don't you try any custom ROM?
have you flashed the latest firmware?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Its not in the sim because he must work without sim ok to navigate in internet or use as camera but it keep rebooting ..... about custom firmware I tried Venom-Revolutin_Googke-Dark Jelly-Maximus-Coins.....
Last ota you mean

Horatio. said:
Its not in the sim because he must work without sim ok to navigate in internet or use as camera but it keep rebooting ..... about custom firmware I tried Venom-Revolutin_Googke-Dark Jelly-Maximus-Coins.....
Last ota you mean
Click to expand...
Click to collapse
flash the latest FIRMWARE (for 4.4) from this thread: http://forum.xda-developers.com/showthread.php?t=2365506
then try custom ROMs
Sent from my HTC One using Tapatalk

kamilmirza said:
flash the latest FIRMWARE (for 4.4) from this thread: http://forum.xda-developers.com/showthread.php?t=2365506
then try custom ROMs
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Just tried says FAILED Remote not allowed... Still trying
Got It ... Flashing REvolution Firmware....

Horatio. said:
Just tried says FAILED Remote not allowed... Still trying
Got It ... Flashing REvolution Firmware....
Click to expand...
Click to collapse
dude its a safety precaution you just have to enter the same command again and you'll get it
kindly read the whole procedure first then do it
Sent from my HTC One using Tapatalk

kamilmirza said:
dude its a safety precaution you just have to enter the same command again and you'll get it
kindly read the whole procedure first then do it
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Put the latest firmware.... Flashed Revolution HD One ..... Hangs on HTC screen will try other custom rom
After 3 or four restart Revolution starts ....Same thing no imei rebooting ..... 30% downloading Viper one 4.2

Horatio. said:
Put the latest firmware.... Flashed Revolution HD One ..... Hangs on HTC screen will try other custom rom
After 3 or four restart Revolution starts ....Same thing no imei rebooting ..... 30% downloading Viper one 4.2
Click to expand...
Click to collapse
go into fastboot USB
and type "fastboot getvar all"
and paste it all here, remove serial and imei before pasting
Sent from my HTC One using Tapatalk

kamilmirza said:
go into fastboot USB
and type "fastboot getvar all"
and paste it all here, remove serial and imei before pasting
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HTxxxxxxxxxxxx
(bootloader) imei: 35xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__A07
(bootloader) battery-status: good
(bootloader) battery-voltage: 4208mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
On Viper one same thing (((

RELOCKED bootloader ! Getting RUU Error 155

I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.24.3263.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.531.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4285mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
Tried to Downgrade hboot to original 1.44 but failed .
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot flash zip orig_hboot
_1.44.0000_M7_RUUmode.zip
target reported max download size of 1514139648 bytes
sending 'zip' (486 KB)...
OKAY [ 0.234s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.281s
Click to expand...
Click to collapse
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?

Divyashwar said:
I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
Tried to Downgrade hboot to original 1.44 but failed .
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?
Click to expand...
Click to collapse
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)

Mutasek24 said:
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)
Click to expand...
Click to collapse
Yeah ! I just did this bro ! .
fastboot flash unlocktoken Unlock_code.bin
Now, Bootloader is unlocked and have recovery TWRP.
Going for S-OFF now.
soon update more...
Thank you

Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Thank you

Divyashwar said:
Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Click to expand...
Click to collapse
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/

nkk71 said:
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/
Click to expand...
Click to collapse
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal

Divyashwar said:
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal
Click to expand...
Click to collapse
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?

nkk71 said:
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?
Click to expand...
Click to collapse
Thank you !
Firewater works
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb push firewater /data/loca
l/tmp
3795 KB/s (4347896 bytes in 1.118s)
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb shell
[email protected]:/ # su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
==================== firewater S-OFF 0.4.0 ==============================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs.posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
that firewater was good and hot, throwing out the empties
=========================================================================
==== device is now s-off. Don't forget to send us all your money =====
=========================================================================
=============== paypal: [email protected] =======================
=========================================================================
[email protected]:/ # Yes
sh: Yes: not found
127|[email protected]:/ #
Click to expand...
Click to collapse

Divyashwar said:
Thank you !
Firewater works
Click to expand...
Click to collapse
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!

nkk71 said:
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!
Click to expand...
Click to collapse
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?

Divyashwar said:
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?
Click to expand...
Click to collapse
If you're going for a downgrade RUU.EXE then you need to downgrade hboot separately first, if you are on hboot 1.55+
May I recommend you take a look at my guide on how to return to stock: http://forum.xda-developers.com/showthread.php?t=2541082
(in particular the FAQs, especially if you are on Win8.1)
If you're keeping the phone, you can skip the LOCKED part and the S-On part (those are for people returning for warranty, or selling the phone).
Let me know if you have questions
Cheers

Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA355W908122
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.

RobbieKeane said:
Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.
Click to expand...
Click to collapse
instructions
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse

clsA said:
instructions
Click to expand...
Click to collapse
Thank you very much I will try and update sir.
My hope come again
[email protected] InsertCoin ADDICT [email protected]~
We can do anything (If we want :3)

I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?

RobbieKeane said:
I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?
Click to expand...
Click to collapse
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76

clsA said:
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76
Click to expand...
Click to collapse
Thank you for your suggest but now I cannot install any rom or zip file in TWRP it's say "Failed to install".
I don't know how to fixed it and how to diagnose or debug what happen T__T.

Q: find it impossible to find the info I need.

First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?

seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
I s-off my new phone (hboot 1.44) last night with rumrunner here's the steps I took. Unlocked Bootloader - flash TWRP - Flashed ARHD 31.6 - booted up the phone and went through a quick install with no accounts setup. ran rumrunner and about 10 min later it was all done. Note .. turn off Sleep on the phone or set it to 10 min. don't leave the phone unattended on the second pour superSU ask for permission two times .. choose yes
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (10/120)
Waiting
Test 2: Booting device
Waiting for ADB (29/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (10/120)
Waiting for ADB (29/120)
must ferment longer...
chilling..................
smells lovely in here....
heh, just a shot glass for this one....
bottles are packed, here we go, shhhhhh....
pouring (1)..................................
pouring (2).................................
pouring (3)...........
Waiting for ADB (32/120)
must ferment longer...
what's that in the bottle still? rum foul, sloppy, real sloppy...
wait for it.........
yep, done. Hope you enjoyed the rum!
Don't forget to send us all your money - [email protected]
Press ENTER to exit
Click to expand...
Click to collapse
C:\fastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT34************ device
C:\fastboot>adb shell
[email protected]:/ # echo -ne '\x00' | dd of=/dev/block/mmcb
ock/mmcblk0p7 bs=1 seek=4265988
1+0 records in
1+0 records out
1 bytes transferred in 0.009 secs (111 bytes/sec)
[email protected]:/ # exit
exit
C:\fastboot>adb reboot bootloader
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT3***********
(bootloader) imei: 354**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4203mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
Click to expand...
Click to collapse
here's the files I used
TWRP 2.6.3.3 - http://techerrata.com/browse/twrp2/m7
ARHD - http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
RumRunner - http://rumrunner.us/

seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026

cr1960 said:
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026
Click to expand...
Click to collapse
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.

seshmaru said:
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.
Click to expand...
Click to collapse
see, you didn't mention anything about GPE in the OP.....

cr1960 said:
see, you didn't mention anything about GPE in the OP.....
Click to expand...
Click to collapse
What my desired outcome is shouldn't be important, I stated that I need S-OFF.
On a side note, is it possible to flash SixthSense 2.1 without S-OFF? The thread itself isn't very clear.
EDIT: Tried it and it does let you.
Anyhow, time to try rumrunner.

HTC One from T-Mobile Germany -> Cannot ROOT

Hello People! I am from Germany and i got a HTC ONE from T-Mobile Germany.
My Device is currently on Android 4.3 and there is still no Update available to 4.4.
So i want to root and S-Off my device to change the CID for getting faster updates.
I have unlocked my device over HTC Dev but i am not able to unlock my Phone.
firewater is telling me that my device is not compatible so i cant use it.
Revone doesnt works too. I cant downgrade my Andoird OS, because
there is no "RUU" avaiable for the german T-Mobile Ediition of this device.
SO WHAT CAN I DO NOW? DO YOU HAVE A GREAT GUIDE THAT WORKS?
Thanks alot!

JaysonOne said:
Hello People! I am from Germany and i got a HTC ONE from T-Mobile Germany.
My Device is currently on Android 4.3 and there is still no Update available to 4.4.
So i want to root and S-Off my device to change the CID for getting faster updates.
I have unlocked my device over HTC Dev but i am not able to unlock my Phone.
firewater is telling me that my device is not compatible so i cant use it.
Revone doesnt works too. I cant downgrade my Andoird OS, because
there is no "RUU" avaiable for the german T-Mobile Ediition of this device.
SO WHAT CAN I DO NOW? DO YOU HAVE A GREAT GUIDE THAT WORKS?
Thanks alot!
Click to expand...
Click to collapse
Post a fastboot getvar all ( minus your imei no and serial no ) and screenshot of your bootloader
Sent from my GT-I9505 using Xparent Skyblue Tapatalk 2

bored_stupid said:
Post a fastboot getvar all and screenshot of your bootloader
Sent from my GT-I9505 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.22.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4311mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
BOOTLOADER
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO 4A.22.3263.03
OpenDSP-v32.120.274.0909
OS-3.63.111.3
eMMC-boot 2048MB
Nov 27 2013
Thanks!

Now i got su access and SU on my device. I just need a tool to make S-OFF
rumrunner and firewater doesnt work... firewater says: device not supported
Please help!

JaysonOne said:
Now i got su access and SU on my device. I just need a tool to make S-OFF
rumrunner and firewater doesnt work... firewater says: device not supported
Please help!
Click to expand...
Click to collapse
1) Flashed Recovery in FASTBOOT (fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img) http://teamw.in/project/twrp2/164
2) Let it reboot to Android
3) adb push UPDATE-SuperSU-v1.80.zip /sdcard/Download http://download.chainfire.eu/370/SuperSU
4) adb push Bulletproof-m7-6.1.zip /sdcard/Download http://forum.xda-developers.com/showthread.php?t=2233665
5) adb reboot recovery
6) Using TWRP - install UPDATE-SuperSU, and also install the Bulletproof Insecure Kernel;( for your version of Rom )
7) Let it reboot to Android
8) Made sure fastboot was disabled
9) Made sure usb debugging was enabled
10) Made sure "Verify Apps" was unchecked
11) Made sure "Unknown Sources" was checked
12) Made sure supersu "automatically" granted Root Requests
13) Made sure there is no lock screen
14) run firewater again http://firewater-soff.com/instructions/

bored_stupid said:
1) Flashed Recovery in FASTBOOT (fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img) http://teamw.in/project/twrp2/164
2) Let it reboot to Android
3) adb push UPDATE-SuperSU-v1.80.zip /sdcard/Download http://download.chainfire.eu/370/SuperSU
4) adb push Bulletproof-m7-6.1.zip /sdcard/Download http://forum.xda-developers.com/showthread.php?t=2233665
5) adb reboot recovery
6) Using TWRP - install UPDATE-SuperSU, and also install the Bulletproof Insecure Kernel;( for your version of Rom )
7) Let it reboot to Android
8) Made sure fastboot was disabled
9) Made sure usb debugging was enabled
10) Made sure "Verify Apps" was unchecked
11) Made sure "Unknown Sources" was checked
12) Made sure supersu "automatically" granted Root Requests
13) Made sure there is no lock screen
14) run firewater again http://firewater-soff.com/instructions/
Click to expand...
Click to collapse
Hey, i've done what you told me...
It says again
********** whelp, this sucks, firewater can not work on your device **********
********** no amount of reflashing, retrying, or ruuing will fix... **********
********** DO NOT COME TO IRC ASKING FOR UPDATES OR ETAS!!!!!! **********
********** if we are able to fix this issue, it will be announced **********
********** bye bye.....sorry it didn't work out. **********
There is a newer versopm of Bulletproof available: Bulletproof-m7-8.1 <- should i install that?
And i have installed TWRP 2.7 insteed 2.6.3 <- is that ok?
Thanks!

You will have charging problems using TWRP 2.7. use TWRP 2.6.3.3 (Most stable). Download and install ARHD 31.6. Make sure anti virus and all security is turned off on PC. Use Rumrunner to S-Off
Sent from my GT-I9505 using XDA Premium 4 mobile app

Done what u told me but it still doesnt works...
Rumrunner ist pouring and pouring... nothing happens...
Should i downgrade to Android 4.1 or something?
Maybe it's because the device is from T-Mobile Germany?

The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)................................
pouring (2).................................
pouring (3).................................
pouring (4).................................
pouring (5).................................
pouring (6)..................................
pouring (7).................................
pouring (8).................................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit

I had to run rumrunner 4-5 times over two days before I finally achieved S-Off. Don't give up
Sent from my GT-I9505 using Xparent Skyblue Tapatalk 2

bored_stupid said:
I had to run rumrunner 4-5 times over two days before I finally achieved S-Off. Don't give up
Sent from my GT-I9505 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
OK, i have installed the ROM, the Bulletproof Kernel and i try it many times now... i will report when succeed

Thank you very much my brother !!! you are my hero
bored_stupid said:
1) Flashed Recovery in FASTBOOT (fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img) http://teamw.in/project/twrp2/164
2) Let it reboot to Android
3) adb push UPDATE-SuperSU-v1.80.zip /sdcard/Download http://download.chainfire.eu/370/SuperSU
4) adb push Bulletproof-m7-6.1.zip /sdcard/Download http://forum.xda-developers.com/showthread.php?t=2233665
5) adb reboot recovery
6) Using TWRP - install UPDATE-SuperSU, and also install the Bulletproof Insecure Kernel;( for your version of Rom )
7) Let it reboot to Android
8) Made sure fastboot was disabled
9) Made sure usb debugging was enabled
10) Made sure "Verify Apps" was unchecked
11) Made sure "Unknown Sources" was checked
12) Made sure supersu "automatically" granted Root Requests
13) Made sure there is no lock screen
14) run firewater again http://firewater-soff.com/instructions/
Click to expand...
Click to collapse
this is the first solution that worked for the HTC One T-MOB101 model......thank you very very very very much my friend ... you're my hero

alouigroup said:
this is the first solution that worked for the HTC One T-MOB101 model......thank you very very very very much my friend ... you're my hero[/QUOT
Your welcome
Click to expand...
Click to collapse

[Q] S-OFF failed with firewater and rumrunner with hboot 1.56

I'm trying to go back to stock but i failed every time
I tested this solutions:
Android Revolution HD 31.6 with Custom Recovery 2.6.3.3 with firewater S-OFF and with rumrunner
with rumrunner i got this error:
Code:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (17/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (17/120)
must ferment longer...
chilling..................
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)..................
pouring (2)..................
pouring (3)....................
pouring (4).................
pouring (5)...................
pouring (6)..................
pouring (7)..................
pouring (8)...................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
with firewater i got this output:
Code:
==================== firewater S-OFF 8.0.6.26 ===========================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs. posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
********** whelp, this sucks, firewater can not work on your device **********
********** no amount of reflashing, retrying, or ruuing will fix... **********
********** DO NOT COME TO IRC ASKING FOR UPDATES OR ETAS!!!!!! **********
********** if we are able to fix this issue, it will be announced **********
********** bye bye.....sorry it didn't work out. **********
[email protected]:/ #
my output from "fastboot getvar all"
Code:
$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3951mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
maybe anyone can help?

Exactly i'm the same problem and with stock rom ruu IMEI and baseband is unknown and auto-reboot and with custom rom auto-reboot is removed but imei and baseband are unknown
in One X i flash boot boot.img and imei is back , but in One is'nt
please help , thank you
sorry for my bad english

Unfortunately you are stuck then. Just like me with my warranty replacement phone. I can't s off. There is an app called sunshine that is used to s off the m8. They say there may be support for the m7 in the future. That's really our only hope
Sent from my HTC One using XDA Premium 4 mobile app

Evolutios said:
I'm trying to go back to stock but i failed every time
I tested this solutions:
Android Revolution HD 31.6 with Custom Recovery 2.6.3.3 with firewater S-OFF and with rumrunner
with rumrunner i got this error:
Code:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (17/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (17/120)
must ferment longer...
chilling..................
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)..................
pouring (2)..................
pouring (3)....................
pouring (4).................
pouring (5)...................
pouring (6)..................
pouring (7)..................
pouring (8)...................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
with firewater i got this output:
Code:
==================== firewater S-OFF 8.0.6.26 ===========================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs. posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
********** whelp, this sucks, firewater can not work on your device **********
********** no amount of reflashing, retrying, or ruuing will fix... **********
********** DO NOT COME TO IRC ASKING FOR UPDATES OR ETAS!!!!!! **********
********** if we are able to fix this issue, it will be announced **********
********** bye bye.....sorry it didn't work out. **********
[email protected]:/ #
my output from "fastboot getvar all"
Code:
$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3951mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
maybe anyone can help?[/QUOTE
Will not work. You must wait to appear another exploit
Click to expand...
Click to collapse

but there are people who can s-off the hboot 1.56
but not everyone , only a few people

Evolutios said:
I'm trying to go back to stock but i failed every time
I tested this solutions:
Android Revolution HD 31.6 with Custom Recovery 2.6.3.3 with firewater S-OFF and with rumrunner
Click to expand...
Click to collapse
Crown Clown said:
Exactly i'm the same problem
Click to expand...
Click to collapse
did you try rumrunner in Ubuntu 32bit ? sometimes the PC is the problem

clsA said:
did you try rumrunner in Ubuntu 32bit ? sometimes the PC is the problem
Click to expand...
Click to collapse
i haven't

Crown Clown said:
i haven't
Click to expand...
Click to collapse
If you get the "whelp this sucks....." message then you can't s-off no matter what you do (as the measure says). I'm in the same boat with you and I wait a new exploit like SunShine to be available for M7.

I had the same problem on HBOOT 1.56
Was rooted and bootloader unlocked.
RumRunner & Revone did not work.
Firewater did not work at first either.
What I did was changed the CID to GOOGL001 then I ran Firewater again and it finally worked. Flashed the GE RUU and everything is good.
Phone went from AT&T to GE Rom and got all the updates.

hardstyle123 said:
I had the same problem on HBOOT 1.56
Was rooted and bootloader unlocked.
RumRunner & Revone did not work.
Firewater did not work at first either.
What I did was changed the CID to GOOGL001 then I ran Firewater again and it finally worked. Flashed the GE RUU and everything is good.
Phone went from AT&T to GE Rom and got all the updates.
Click to expand...
Click to collapse
How did you changed CID being S-ON? If you changed CID you were already S-OFF.

cyrusct82 said:
How did you changed CID being S-ON? If you changed CID you were already S-OFF.
Click to expand...
Click to collapse
this is my question too , how did ?!??!?!?!?!?

Crown Clown said:
this is my question too , how did ?!??!?!?!?!?
Click to expand...
Click to collapse
This may help some people, it is possible to change CID without s-off, however very risky and very dangerous, this is how we used to do it on my previous HTC One SV in order to even get s-off, not sure though if this is the same address between both phones mmcblk0p4, so you do this at your own risk, and if you brick, don't come to me.
you have to know that you are pulling your bootloader from your device, yes that's your BOOTLOADER, modifying it and then flashing it back.
http://forum.xda-developers.com/showthread.php?t=2264322

Have pretty much similar problem, running Viper One
tried Firewater, followed the step like
adb reboot
then
adb wait-for-device push firewater /data/local/tmp
then
adb shell
then
su
then
chmod 755 /data/local/tmp/firewater
then
/data/local/tmp/firewater
then
yes
Click to expand...
Click to collapse
But it doesn't S-OFF my device
instead, in the command prompt, an infinite loop of "y" appeared, and nothing happen.
Then, tried to redo the procedure, stucked in the booting logo after adb reboot command, but somehow is able to boot via the bootloader
Any tips?

alwinwh said:
Have pretty much similar problem, running Viper One
tried Firewater, followed the step like
But it doesn't S-OFF my device
instead, in the command prompt, an infinite loop of "y" appeared, and nothing happen.
Then, tried to redo the procedure, stucked in the booting logo after adb reboot command, but somehow is able to boot via the bootloader
Any tips?
Click to expand...
Click to collapse
try typing Yes instead of yes, iirc it is case sensitive

nkk71 said:
try typing Yes instead of yes, iirc it is case sensitive
Click to expand...
Click to collapse
yea, finished that alr, thx anyway
now trying to return stock, stucked at flashing ruu, the cmd said
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\19>adb reboot-bootloader
C:\Users\19>fastboot oem writecid HTC__044
...
(bootloader) Start Verify: 0
(bootloader) Input CID is not super CID
(bootloader) Start Verify: 0
OKAY [ 0.069s]
finished. total time: 0.069s
C:\Users\19>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.043s]
finished. total time: 0.043s
C:\Users\19>adb reboot-bootloader
C:\Users\19>adb reboot-bootloader
C:\Users\19>adb reboot-bootloader
C:\Users\19>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.048s]
finished. total time: 0.048s
C:\Users\19>fastboot flash zip ruu.zip
error: cannot open 'ruu.zip'
C:\Users\19>fastboot flash zip ruu.zip
error: cannot open 'ruu.zip'
C:\Users\19>cd c:\android-sdk-windows
c:\android-sdk-windows>fastboot flash zip ruu.zip
error: cannot open 'ruu.zip'
c:\android-sdk-windows>fastboot flash zip ruu.zip,zip
error: cannot open 'ruu.zip,zip'
c:\android-sdk-windows>fastboot flash zip
unknown partition 'zip'
error: cannot determine image filename for 'zip'
c:\android-sdk-windows>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.043s]
finished. total time: 0.044s
got my ruu from http://www.htc1guru.com/dld/ruu-zip...0-01_release_312087_signed_2_4_decrypted-zip/
sorry it its kind of out of topic
turning my handset to the service center on monday, speaker issue

alwinwh said:
yea, finished that alr, thx anyway
now trying to return stock, stucked at flashing ruu, the cmd said
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\19>adb reboot-bootloader
C:\Users\19>fastboot oem writecid HTC__044
...
(bootloader) Start Verify: 0
(bootloader) Input CID is not super CID
(bootloader) Start Verify: 0
OKAY [ 0.069s]
finished. total time: 0.069s
C:\Users\19>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.043s]
finished. total time: 0.043s
C:\Users\19>adb reboot-bootloader
C:\Users\19>adb reboot-bootloader
C:\Users\19>adb reboot-bootloader
C:\Users\19>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.048s]
finished. total time: 0.048s
C:\Users\19>fastboot flash zip ruu.zip
error: cannot open 'ruu.zip'
C:\Users\19>fastboot flash zip ruu.zip
error: cannot open 'ruu.zip'
C:\Users\19>cd c:\android-sdk-windows
c:\android-sdk-windows>fastboot flash zip ruu.zip
error: cannot open 'ruu.zip'
c:\android-sdk-windows>fastboot flash zip ruu.zip,zip
error: cannot open 'ruu.zip,zip'
c:\android-sdk-windows>fastboot flash zip
unknown partition 'zip'
error: cannot determine image filename for 'zip'
c:\android-sdk-windows>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.043s]
finished. total time: 0.044s
got my ruu from http://www.htc1guru.com/dld/ruu-zip...0-01_release_312087_signed_2_4_decrypted-zip/
sorry it its kind of out of topic
turning my handset to the service center on monday, speaker issue
Click to expand...
Click to collapse
"error: cannot open 'ruu.zip'" = MyFileNameIsWrong
use DIR command in command prompt to check filenames (and extension), and make sure MD5 on your downloads is correct

nkk71 said:
"error: cannot open 'ruu.zip'" = MyFileNameIsWrong
use DIR command in command prompt to check filenames (and extension), and make sure MD5 on your downloads is correct
Click to expand...
Click to collapse
what is DIR command?
And checked the MD5 matched, now tryng to figure it out
btw my cpu only have USB 3.0 port, is it fine?

alwinwh said:
what is DIR command?
And checked the MD5 matched, now tryng to figure it out
btw my cpu only have USB 3.0 port, is it fine?
Click to expand...
Click to collapse
USB2 is very preferred, Windows 8.1 is a deal-breaker
check my guide's FAQ section: http://forum.xda-developers.com/showthread.php?t=2541082
DIR lists the directory contents in windows command prompt, similar to "ls" in unix

nkk71 said:
USB2 is very preferred, Windows 8.1 is a deal-breaker
check my guide's FAQ section: http://forum.xda-developers.com/showthread.php?t=2541082
DIR lists the directory contents in windows command prompt, similar to "ls" in unix
Click to expand...
Click to collapse
well just completed mine, with USB 3.0
Thanks for the answer anyway
Is now stock with S-OFF
Running Win 7