Yo guys, please i need ur help, im fighting with this for 2 days and i think i cant win this battle against my phone.
So the problem is:
First, i installed P.A 4.0 beta kit kat with iodak v9 kernel, the phone was going random dead. I thought is the problem with P.A cause is beta so i went to Vanir 4.3.1. I went got iodak v9 kernel again and it was doing this same for me. Random dead phone (off had to make him on)
So i tho its problem with kernel so i back to iodak 8v5 fixed from anykernel project. Yea, phone is no random dead anymore but when its going to deep sleep (i think cause when i wont use phone for 2h) and i try to use it again, the whole system android is lagging so much.
Guys, pls, help me. What i have to do? something bad with my phone or with drivers/system/android?
I have done dalvik wipe and cache everytime.
Second question is ... how to formate sd card? I cant, from computer and from android (no option) from recovery when im doing format storage sd card1 is getting error. What i have to do?
The most important is first question so please help me!
Thanks!
Taggin said:
Yo guys, please i need ur help, im fighting with this for 2 days and i think i cant win this battle against my phone.
So the problem is:
First, i installed P.A 4.0 beta kit kat with iodak v9 kernel, the phone was going random dead. I thought is the problem with P.A cause is beta so i went to Vanir 4.3.1. I went got iodak v9 kernel again and it was doing this same for me. Random dead phone (off had to make him on)
So i tho its problem with kernel so i back to iodak 8v5 fixed from anykernel project. Yea, phone is no random dead anymore but when its going to deep sleep (i think cause when i wont use phone for 2h) and i try to use it again, the whole system android is lagging so much.
Guys, pls, help me. What i have to do? something bad with my phone or with drivers/system/android?
I have done dalvik wipe and cache everytime.
Second question is ... how to formate sd card? I cant, from computer and from android (no option) from recovery when im doing format storage sd card1 is getting error. What i have to do?
The most important is first question so please help me!
Thanks!
Click to expand...
Click to collapse
You are probably suffering from throttling.Make sure max CPU frequency is @ 1500 mhz.I'm on PA 4.0 beta with iodak v9.0(or 9.1, doesn't really matter) and having no problems at all.
Also to fix your SD card, get an SD card reader (USB microSD reader or laptop, both works.) and install minitool partition wizard on windows.First wipe the SD card with it and then format to fat32.Make sure you label it or else it won't be visible in windows.It'll still work on android though.
Also could you explain "Random dead"? Shutdown? BlackScreenOfDeath? Either way I'd say it's caused by heat.
Thanks so much for answer.
As i know v9 is max 1500 mhz? so how it go throttling? and throttling when i didnt do anything? phone was just on deep sleep? I was already using v8.5 on official cm 10.1 rc 3 and no problems and it was 1,7.. mhz
So i will change now to 1,5 and see if the problem is still there or not.
edit: yes i meant Shutdown... or just black screen but i could hear if someone is calling to me. Sometimes only black screen and i dont hear anything but when u were calling to me u could hear signal like a phone is on not off
Ok, seem is not the problem with 1700 mhz.. phone again gone..
Taggin said:
Ok, seem is not the problem with 1700 mhz.. phone again gone..
Click to expand...
Click to collapse
You say you can't format the SD-Card - what happens when you try?
As you have this problem on two different ROMs, I'd be tempted to flash back to Stock and make sure you don't get similar problems there - that way you can isolate the hardware from the equation and start with a fresh platform for reflashing custom ROMs afterwards.
well i dont have even option to format my sd card. When i want do it from android vanir 4.3.1 there is no option. The only one is make off ur sd card. From windows when i click right mouse i can see only how much gb is used/free. No option to format. Whats bad? i tried from recovery too but then i got only fail, no number of issue or sth..
And @ rom... today on night it was looking good.. 30% per cent on battery... i made localisation off and went sleep.. i wake up moring and battery was 0%. No idea why, i made battery now 100% and looking if the problem is still there. Actually its working fine not sure for how long. Im still on 1500 mhz. If it will work today fine it mean the problem was @1700 mhz but why? when i was already using 1700 mhz with 4.2.2 and no issues..
And why in night i lost 30% of battery too? the problem with off localisation or what? or my phone need at least one connection with internet, since i dont have wifi etc so its fresh install wihout internet connect..
I hope u know what im talking @ cause my english is not good haha
Thanks for help!!!
Taggin said:
well i dont have even option to format my sd card. When i want do it from android vanir 4.3.1 there is no option. The only one is make off ur sd card. From windows when i click right mouse i can see only how much gb is used/free. No option to format. Whats bad? i tried from recovery too but then i got only fail, no number of issue or sth..
And @ rom... today on night it was looking good.. 30% per cent on battery... i made localisation off and went sleep.. i wake up moring and battery was 0%. No idea why, i made battery now 100% and looking if the problem is still there. Actually its working fine not sure for how long. Im still on 1500 mhz. If it will work today fine it mean the problem was @1700 mhz but why? when i was already using 1700 mhz with 4.2.2 and no issues..
And why in night i lost 30% of battery too? the problem with off localisation or what? or my phone need at least one connection with internet, since i dont have wifi etc so its fresh install wihout internet connect..
I hope u know what im talking @ cause my english is not good haha
Thanks for help!!!
Click to expand...
Click to collapse
You don't format your SD Card from within Android OS - you do it from Recovery only.
Ignore all your other problems. You have so many different issues that other people don't report, so there is something major wrong.
Re-flash to Stock (Recovery and ROM) via .kdz and then start troubleshooting from there.
Actually is working fine, no battery drain and no shutdown. I made @1500 mhz. Still dont know why there was problem with @1700. I will write here if the problem will be again. Then i will try with stock.
From recovery i cant format idk why... clicking on it format storage/android/data and getting error - failed to format or sth
Ty for help.
Related
ever since updating to the cyanogen 4 series of roms i have been getting 3g issues. by this i mean that sometimes it doesnt want to connect to the internet from any program, like the market, google voice, or the browser. sometimes it does work, but sometimes i have to reboot the phone or just turn off 3G in order to browse the web. i am running haykuros spl with apps2sd with a 800mb ext4 partition. and im running the latest cyan mod.
can any one assist me in this?
what can i do to fix this?
do i need a new g1?
I dunno if wipe helps have you tried that? boot into recovery, wipe (alt+w)
if not, jacxrom is a good alternative to cyan, i guess...
but chances are your phone's hardware itself is fine, and you won't need a new one.
jcarrz1 said:
I dunno if wipe helps have you tried that? boot into recovery, wipe (alt+w)
if not, jacxrom is a good alternative to cyan, i guess...
but chances are your phone's hardware itself is fine, and you won't need a new one.
Click to expand...
Click to collapse
i just wiped coming from his previous rom. 4.04
ive never had this problem and i dont want to switch rom series
can any one help me?
this is really weird.
I had same problem.. so instead of doing an upgrade.. I did a complete wipe and installed the new stable CM fresh... since then I feel that I don't have this issue..
dilfatx said:
I had same problem.. so instead of doing an upgrade.. I did a complete wipe and installed the new stable CM fresh... since then I feel that I don't have this issue..
Click to expand...
Click to collapse
forreals?
because i had just wiped and i havent updated to anything since then..
has anyone else experienced this and how did u fix it?
ive had the same thing happening lately. i had it happen tonight with just my edge connection i had to reset the phone. I also just wiped and reformatted my sd card for a linux-swap partition before flashing this rom so i know that isnt the problem.
2.0t03speed said:
ive had the same thing happening lately. i had it happen tonight with just my edge connection i had to reset the phone. I also just wiped and reformatted my sd card for a linux-swap partition before flashing this rom so i know that isnt the problem.
Click to expand...
Click to collapse
so how did u fix it?
Try re-installing the radio.
I had to do a second wipe after installed to fix the 3g problem. Since then I haven't noticed any problems
bootleg16 said:
so how did u fix it?
Click to expand...
Click to collapse
just rebooted the phone and all was well.
I dunno if this is related, but Ive been having bluetooth issues since the latest few updates, bluetooth has never been perfect for me, but when I listen to mp3s over bluetooth it almost constantly stutters, like its dropping the BT connection, because the music seems to have been going on playing while I don't hear anything.
what is with all these questions in the wrong forum? where is Mikey when you need him?
READ THE STICKIES. POST IN THE Q&A FORUM.
Mod request to delete thread: fix for BT and 3G issues
1. power down the unit with the red key. Wait a minute. Power back up.
2. Try reinstalling the radio
3. Try reinstalling the ROM, and then reinstall the radio again
5. You shouldn't have to, but wipe, re-create (not just reformat) your ext# partition (you can back it up and refill it, but occaisionally stuff gets left behind) reinstall the ROM, wipe, install again, install the radio, full power cycle.
5. (Last) post your issue
This actually belongs in the ROM forum, but not until these basics have been tried.
Janis said:
1. power down the unit with the red key. Wait a minute. Power back up.
2. Try reinstalling the radio
3. Try reinstalling the ROM, and then reinstall the radio again
5. You shouldn't have to, but wipe, re-create (not just reformat) your ext# partition (you can back it up and refill it, but occaisionally stuff gets left behind) reinstall the ROM, wipe, install again, install the radio, full power cycle.
5. (Last) post your issue
This actually belongs in the ROM forum, but not until these basics have been tried.
Click to expand...
Click to collapse
i tried this but still no cigar,
=[
I don't believe this to be a problem with a ROM or radio. I've had similar connection issues recently. i noticed it after flashing a Hero Theme to Cyan 3.9somethin. I thought the rom might have been the cause of the issue but a buddy of mine that i work with has a stock G1 and has similar connection issues. Also a customer came into the store who had a Samsung Highlight with similar problems, i figured it was a problem on Tmobile's End. It still hasn't fixed itself so i plan to give customer service a call in the morning and see if they have any resolutions or if its a recognized issue. I'll post back with what i get tomorrow.
MOD EDIT
Moved to Q&A forum
no signal..
As of late my phone was good... but now it says no service all day why.. an what can i do to fix... i was running cyanogen 4.0.4... i beive i hav the latest raido.. spl dont know... the wifi still works thou.. help please..
Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
I tried the following:
- full wipe via AmonRa + format of SD (128 SWAP + 512 EXT + FAT) clean reinstall of a presumably stable rom --> failed keeps rebooting or freezing
- I did a fastboot erase system -w + flash of a clean ROM --> failed
The bizarre thing is it never crashes when the phone is USB plugged on my laptop, therefore I've never seen a logcat showing anything bad ...
Also I can't identify any pattern or scenario which would systematically frag my magic... Even when I install a fresh new ROM, it can work pretty well for as long as an hour but then start being screwed up.
I've spent quite some time on this forum desperately looking for someone experiencing the same troubles but so far unsuccessfully ...
Would you guys have any idea ?
cheers
ZeRoT
zerot said:
Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
I tried the following:
- full wipe via AmonRa + format of SD (128 SWAP + 512 EXT + FAT) clean reinstall of a presumably stable rom --> failed keeps rebooting or freezing
- I did a fastboot erase system -w + flash of a clean ROM --> failed
The bizarre thing is it never crashes when the phone is USB plugged on my laptop, therefore I've never seen a logcat showing anything bad ...
Also I can't identify any pattern or scenario which would systematically frag my magic... Even when I install a fresh new ROM, it can work pretty well for as long as an hour but then start being screwed up.
I've spent quite some time on this forum desperately looking for someone experiencing the same troubles but so far unsuccessfully ...
Would you guys have any idea ?
cheers
ZeRoT
Click to expand...
Click to collapse
Probably other people will say it, but wrong forum.
Also, what ROMs have you flashed after the nightly froyo? Nightly froyos are cautioned, which I'm sure you knew.
yep, I used a couple of FroYo SP French Connection nightlies and then switched to CM V6.0.0-RC1.
(sorry if it's the wrong forum, @admins, please feel free to move it to wherever make sense)
zerot said:
Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
I tried the following:
- full wipe via AmonRa + format of SD (128 SWAP + 512 EXT + FAT) clean reinstall of a presumably stable rom --> failed keeps rebooting or freezing
- I did a fastboot erase system -w + flash of a clean ROM --> failed
The bizarre thing is it never crashes when the phone is USB plugged on my laptop, therefore I've never seen a logcat showing anything bad ...
Also I can't identify any pattern or scenario which would systematically frag my magic... Even when I install a fresh new ROM, it can work pretty well for as long as an hour but then start being screwed up.
I've spent quite some time on this forum desperately looking for someone experiencing the same troubles but so far unsuccessfully ...
Would you guys have any idea ?
cheers
ZeRoT
Click to expand...
Click to collapse
This may not be your problem, but I found personaly that as soon as I enabled swap, my phone became a bit unstable. It was not rebooting itself when I had compcache on. Then I turned that off and switched to swap and now my phone rebooted itself sometimes. For me compcache was noticeably faster but swap multitasks better. So I've kept swap in spite of reboots. I have also found that switching between them either way my phone becomes unstable and rebooted itself multiple times before becoming stable on compcache or at least not rebooting as much on swap.
Sent from my HTC Magic using XDA App
well i had the same issue. nothing helped, i reinstalled the spl, radio, rom, recovery, everything.
the only thing that helped is :
REROOTING YOUR PHONE
there´s no other way.
have a good day.
zerot said:
Hi guys,
I have a problem with my Magic 32B and hope one of you guys could figure out where this all come from.
Since a couple of weeks my magic has become very unstable and I would say I have about 20 to 30 freezes or reboots a day. It suddenly started when I switched from a nightly froyo to another and since then regardless on the ROM I flash I always have the same behaviour (I'm currently on the CM6 RC1).
<snip>
Click to expand...
Click to collapse
I would expect a Donut based ROM to be fine. Which ROMs have you tried since the freezing/rebooting problem started?
The next time it reboots you should take a copy of /proc/last_kmsg and post it here. You can do so with:
Code:
adb shell cat /proc/last_kmsg > last_kmsg.log
Reboot cycle
I'm sorry if I'm in the wrong area, but I also have the same problem. I have a mytouch 3g (32B). I recently flashed it with "Froyo SPF Connection" and that made it reboot just about every 30 seconds. I restored it to the 1.6 Donut rom and it kept rebooting but repeated the process and now it seems fine. The problem is I don't want the 1.6 rom but that's all can have right now since everything else slows it down and freezes it. Please help me solve this problem. I'm opened to any useful recommendations and every help is appreciated.
benjaminb007 said:
I'm sorry if I'm in the wrong area, but I also have the same problem. I have a mytouch 3g (32B). I recently flashed it with "Froyo SPF Connection" and that made it reboot just about every 30 seconds. I restored it to the 1.6 Donut rom and it kept rebooting but repeated the process and now it seems fine. The problem is I don't want the 1.6 rom but that's all can have right now since everything else slows it down and freezes it. Please help me solve this problem. I'm opened to any useful recommendations and every help is appreciated.
Click to expand...
Click to collapse
Eclair ROMs are just as stable as donut ROMs and as fast as donut. Just don't use Froyo till it's stable. Use CM5.0.8 or any CM variant and you should be fine.
I'm having the same problem after flashing the new radio the phone will boot and as soon as its done loading the home screen it will reboot then load the home scree and turn off
Flashed French Connection ROM few days back and have had same problems as above ever sense.. Flash other ROM's and they constantly Reboot. cy 6.0 Working for me now, But only my Nandroid back up of it. Re flashed it fresh and it reboots...
why dont you reroot ur phones like i told you?
This freezing and rebooting problem is weird - it doesn't make sense a lot of the time.
I've developed a ROM based on AOSP 2.2 for the G1 and it also seemingly randomly freezes or reboots.
When it reboots it's usually the result of an ARM9 crash and so far I have tracked it down to a call to a proprietary library function which doesn't return to the correct return address. It seemingly returns to a random address and the consequences of doing so is random. Sometimes it causes a freeze or a reboot and other times it doesn't.
I'm starting to suspect something in the JNI code is causing the problem but it's difficult to track it down.
FroYo SP French Connection is overclocked to 614 by default. My Mytouch (32B) reboots and freezes constantly if i don't turn it down to 576. Try turning the overclock down in set cpu to 528 first then if its stable you can try turning it up a little.
Urgh, I hadn't considered clock speed as a potential problem.
What if some of our phones are unstable at the default Froyo maximum of 528 MHz?
I am (was) in the same situation (Magic 32B). It started with CM6 RC1 first and after it, my nandroid backups got weird too! I always wiped everything and rebooted by myself several times. I never played with overclocking, compcache or ext partition - but after trying other FROYO ROMs as well, even a clean install of CM5.0.8 final was unstable got fc's and rebooted...
So, after one year of trying nearly every ROM out there, i finally made a decision: i went back to my stock rooted 1.5 cupcake!! Yes, 1.5! I never tried this ROM before - even in my first days i immediately switched to sense...
And what should i say? I'm blown away by the speed and stability of this ROM! Unbelievable! ... sad day ... really sad ....
And my decision after that: i will wait for an official FROYO for Magic, which was at least officially announced...
sad, sad, sad...
alutastisch said:
why dont you reroot ur phones like i told you?
Click to expand...
Click to collapse
Well, i think - like my approach - rerooting will not bug down the fault in FROYO ROMs. I hope it will be sorted out, but for me the daily flashing is over for now. I really appreciate the hard work of all the devs and i also donated to some, but at the end of the day i just want my phone and don't want to wait for going to homescreen or missing a call because of the lags...
sad, sad, sad...
akivlin said:
Urgh, I hadn't considered clock speed as a potential problem.
What if some of our phones are unstable at the default Froyo maximum of 528 MHz?
Click to expand...
Click to collapse
Well, I think default for stock unrooted phones is like three hundred something you could try that but it would be really slow.
hudl said:
I am (was) in the same situation (Magic 32B). It started with CM6 RC1 first and after it, my nandroid backups got weird too! I always wiped everything and rebooted by myself several times. I never played with overclocking, compcache or ext partition - but after trying other FROYO ROMs as well, even a clean install of CM5.0.8 final was unstable got fc's and rebooted...
So, after one year of trying nearly every ROM out there, i finally made a decision: i went back to my stock rooted 1.5 cupcake!! Yes, 1.5! I never tried this ROM before - even in my first days i immediately switched to sense...
And what should i say? I'm blown away by the speed and stability of this ROM! Unbelievable! ... sad day ... really sad ....
And my decision after that: i will wait for an official FROYO for Magic, which was at least officially announced...
sad, sad, sad...
Well, i think - like my approach - rerooting will not bug down the fault in FROYO ROMs. I hope it will be sorted out, but for me the daily flashing is over for now. I really appreciate the hard work of all the devs and i also donated to some, but at the end of the day i just want my phone and don't want to wait for going to homescreen or missing a call because of the lags...
sad, sad, sad...
Click to expand...
Click to collapse
I totally agree. I know waiting for the official Froyo for the Magic may take years before it's finally released, but I'm tired of flashing and testing new roms every day without getting the results I want. As a result of this frustration, I will go back to Donut 1.6 for now and wait for the official update. Hopefully 5.1 won't be out before we finally get the update
TJ Gonz said:
Well, I think default for stock unrooted phones is like three hundred something you could try that but it would be really slow.
Click to expand...
Click to collapse
Yes, I will find out the maximum Donut clock speed and test at that speed.
TJ Gonz said:
Well, I think default for stock unrooted phones is like three hundred something you could try that but it would be really slow.
Click to expand...
Click to collapse
I modified the kernel to allow only the following frequencies:
09-12 01:41:12.579 D/setcpu ( 281): Autodetecting Frequencies
09-12 01:41:12.599 D/setcpu ( 281): Frequencies autodetected: 122880 128000 245760
Click to expand...
Click to collapse
Unfortunately the phone still rebooted due to an ARM9 crash.
I've attached a small CM6 RC1 update as a test fix for the ARM9 crashing.
Anyone experiencing random freezing or reboots should give it a try by copying it to your SD card and boot to recovery to flash it.
If you install the test fix but still experience random reboots I'd appreciate if you could upload a copy of /proc/last_kmsg to http://android.pastebin.com and post the link to it in here. A logcat up to the point of the reboot would be very helpful too.
hey there fellas
(i'm sorry to post my problem here in the development section but i guess it might be related to the lag fix)
My SGS is acting weird lately , dunno if its related to the lag fix ( [UTIL] One Click Lag Fix 1.0 - 2.0 ) ever since i got the phone with normal use iv never seen anything funny like this. it all started with lag fix version 1 , the phone was fast and with that fix even faster , the phone was all good started with the root as step 1, then it was the market fix, after that i was tempted to try the lag fix which was amazingly effective, went from version 1 to version 2 of it and then it started.
the phone took long to respond 'sometimes' when the screen was off and after a day the phone simply didnt want to get out of standby ( black screen ) so used the boot mode and formatted the phone , once the phone started i formatted the internal sd and rebooted and applied the Root-market fix-lag fix ver 1.0 in that sequence, now the phone seems a little weird . by weird i mean strange things r happening like when i goto the apps menu the icons move by them selves in a random way after a reboot. I set it up to show apps in the first couple pages followed by games , now its all messed up and i didn't mind it at all.
with my internet provider i really have to keep an eye on my 3g usage, and have been using 3g watchdog to keep track. now i notice everytime i restart or switch off / on the phone, the counter goes back to 0 which really gets on my nerves.
now to track the problem would someone point me in the right direction ?
could it be the lag fix ? could it be the program itself ? should i switch to another ? would i need a fresh flash ? my phone is working on eclair 2.1 version I9000JXJF1 , using kies since day 1 there has been no firmware update for the U.A.E and i dont want to risk updating to anything unless its official from samsung.
any help is much appreciatted ^_^
it's interestingly weird case.
i'll start by suggesting to wipe the cache data, and data in recovery mode or
*2767*3855#
WARNING! FACTORY RESTORE, DATA WIPE AND RESET TO FACTORY STATE, as soon as you enter the last # use it only if you want to clean wipe your phone
i started with the first and then was like WTH and went with the second only to find out its the same procedure hehehe..... anyways phone is fresh now , started with rooting then off with lag fix 2.0 ( hope it dont get that same problem again ) . Now i notice there's no bootup logo when starting the SGS ( the swirling S ) but the sound still plays , is this normal ?
mazroui said:
the phone took long to respond 'sometimes' when the screen was off and after a day the phone simply didnt want to get out of standby ( black screen )
Click to expand...
Click to collapse
I had this exact same issue when I was using SetCPU. Uninstalled it and the problem was gone. Also some of the custom kernels are having wake-up lag.
mazroui said:
when i goto the apps menu the icons move by them selves in a random way after a reboot
Click to expand...
Click to collapse
Are you using LauncherPro? If so, this is common behavior and might also be so with other launchers. After booting up it will sequentially load your apps and that's why they will seem to popup in a random order bouncing about in the menu. After it's finished loading everything it will all be back to normal.
mazroui said:
the counter goes back to 0 which really gets on my nerves
Click to expand...
Click to collapse
Seems to me that you had a problem with applying your lagfix and that the phone doesn't store your app-data properly.
My recommendation is to update to the JM5 firmware. It's the version that's been most tested with the lag fixes. I'm running JM5 with RyanZA's Lag Fix 2.0 and SamSet 1.9e (except kernel). It works like a charm and have done so for the past week. No wake-up lag, crashes or other weird behavior.
Hope this helps, and good luck
mazroui said:
i started with the first and then was like WTH and went with the second only to find out its the same procedure hehehe..... anyways phone is fresh now , started with rooting then off with lag fix 2.0 ( hope it dont get that same problem again ) . Now i notice there's no bootup logo when starting the SGS ( the swirling S ) but the sound still plays , is this normal ?
Click to expand...
Click to collapse
First boot will always take longer time and might also affect the sync between the sound and animation. It's normal!
mekwall
thank you very much for your informative reply
let me start replying to what u just told me
#1
I had this exact same issue when I was using SetCPU. Uninstalled it and the problem was gone. Also some of the custom kernels are having wake-up lag.
i dont have SetCPU installed as i have tried it for a few days and found it useless , since i dont have the 1.2 ghz tune i dont see why i should even keep the app, yes i saw how the app messes with the phone so i removed it.
#2
Are you using LauncherPro? If so, this is common behavior and might also be so with other launchers. After booting up it will sequentially load your apps and that's why they will seem to popup in a random order bouncing about in the menu. After it's finished loading everything it will all be back to normal.
no im not using Launcher Pro and i could see how it would affect the arrangment of the programs but it wasn't that. My guess is it might probably be 1 of 2 , either titanium backup or Mybackup pro after restoring the data and not the apps.
#3
Seems to me that you had a problem with applying your lagfix and that the phone doesn't store your app-data properly.
im guessing a maybe here since i dont know how it would affect my 3g watchdog's app or make it reset the counter, i switched to Network monitor ( not as good as 3g watchdog but it does the same job ^_^ )
#4
My recommendation is to update to the JM5 firmware. It's the version that's been most tested with the lag fixes. I'm running JM5 with RyanZA's Lag Fix 2.0 and SamSet 1.9e (except kernel). It works like a charm and have done so for the past week. No wake-up lag, crashes or other weird behavior.
just like i said id love to go that way but can wait a month or 2 till froyo joins the fun.
#5
First boot will always take longer time and might also affect the sync between the sound and animation. It's normal!
i hope its just a sync problem , but the phone gave up on the animation , after a couple of tries yea the logo simply isn't there anymore just the sound but i did notice a little faster boot up time this way with only a small vibration to indicate the phone has started.
i'll redo everything again 1 step at a time 1 app at a time , i'll delete my backups as i could do it just this time to get a good fix after a clean boot , and i guess i'll just stick with version 1 as i didnt see anything wrong with it so no need to jump to version 2 of the lag fix
could anyone tell me what app will back up all my sms/mms/call log without any trouble ? does titanium do that coz i looked everywhere and couldn't find anything regarding that
Thanx to everyone for your help ^_^
now to find a fix for that gangster game after redoing everything
ok new discovery
using mybackup pro to backup all the sms's and mms's restarted after the restore and boom
what i see now is the old background from before the *2767*3855# method and the apps linked to homescreen from before , could it be the trouble maker ?
ok now im not gonna use it and test the whole procedure all over again
ok i guess thats it... even after a factory reset the logo wont show up again T_T
any tutorials on how to flash the original FW safely ? where could i find my original FW ? thing is i need arabic lang and doubt the JW5 has it built in anyways im off for now....... ~ spends the night googling~
mazroui said:
ok i guess thats it... even after a factory reset the logo wont show up again T_T
any tutorials on how to flash the original FW safely ? where could i find my original FW ? thing is i need arabic lang and doubt the JW5 has it built in anyways im off for now....... ~ spends the night googling~
Click to expand...
Click to collapse
JPJG8 off samsung-firmwares is very good, and has arabic support.
ok ^_^ thanx for the fast reply
downloading it as im typing right this instance
will post on how things go with my SGS
having trouble right now with restoring my apps using titanium T_T whenever i restore it freezez on the first app it shows guess i have to install them 1 by 1
i guess a fresh start is a must
Again thanx you fellas for the informative/fast replies
Much appreciatted ^_^
last but not least
everything downloaded and ready for the flash
using a youtube video looking at a detailed guide to flash my sgs
i notice the big FW file has 3 files starting with CODE , CSC and another CSC
my file JPJG8 has got OJP_JG9 and the files in it are
zImage
param.lfs
modem.bin
factoryfs.rfs
dbdata.rfs
cache.rfs
where do i go from here ?
B U M P . . . . . . .
Anyone knows whats the deal with those files
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
TheMadxtremist said:
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
Click to expand...
Click to collapse
Which kernel did you use? To be honest, go back to Windows if following simple guide is too difficult. And camera quality won't be any better in Android.
The only reasonable kernel for NAND is the kernel with separate cache partition. On each other appear errors sooner or later. Install this kernel, reinstall the system and apply the update.
And do not start constantly new threads to the questions on which someone already replied before. Read and search forum!!
You people dont get it .
My kaiser is and android F-O-R-E-V-E-R.
Because i flashed it using kaisercustomruu.
and the power button+camera+reset button dont work for me.
i think there's a prob with camera button that's why.
so , now , how do i flash the kernel ?
Please help !!
i cant get into bootloader .
is it the camera button then ?
tell me ?
No, you don't get it man! Stop beeing a noob and learn to follow simple guides! You need to copy KAISIMG and KAIDSIAG (make sure to unpack ) to your memory card. After that you can flash with "Power + Camera + Reset". Is this so hard to Google and find what you need? Also, to make sure you won't make any more mistakes, check if you have HardSPL installed and apply all updates from kernel you used. I recommend you this kernel.
http://forum.xda-developers.com/showthread.php?t=1152219
Man, I just hate those guys who are noobs and consider themselves to be experienced users .
Mr. Noob Hater , were'nt u a noob ?
and i told u i have tried that and it doesnt work................
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
TheMadxtremist said:
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
Click to expand...
Click to collapse
Do you have HardSPL? And remember to keep Camera button fully pressed, not just in half.
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
TheMadxtremist said:
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
Click to expand...
Click to collapse
What do you mean it doesn't accept your SIM card? Some screenshots? Anyway, if Camera button doesn't work for you, then you're stuck with this kernel forever . Which one did you flash? I'll give you proper update for it.
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
TheMadxtremist said:
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
Click to expand...
Click to collapse
I asked you about kernel! Whcich KERNEL did you flash?
I dont remember correctly , but i think i flashed kernel with separate cache partition and modified cpu and gpu with atools.....
Now , i only need an update .............
i figured out and rectified the problem as well......
Was pretty hard......
AND THANK YOU MR> NOOB HATER
waiting for wifi update.....
go to settings/about phone and check kernel version. If show something like 2.6.32.9 N50Vc #39 Kernel you can find androidupdate.tar packed with kernel in Cache Kernel & ATools.zip. http://forum.xda-developers.com/showthread.php?t=1152219.
Can you share what was wrong with the sim? (for future"generations" with the same problem)
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
No. Rather, it will not work. You do not have a scoot's kernel... Maybe someone else remember your kernel signature and give you update.
TheMadxtremist said:
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
Click to expand...
Click to collapse
Man, you just proved that you're a huge noob. You flashed a kernel with RUU and you don't even remember which one was that. LOL . Looks like you're out of WiFi forever now . I've never seen such kernel anywhere...
TheMadxtremist, If I were you I'd tried to find the reason why camera button not working. You wrote that you dropped phone, so probably this is some hardware failure(flex tape, switch, something else). If you have any experience try to disassemble phone and fix this or find someone who can do it for you. Because even if someone will give you update your phone will be unstable with this kernel.
Good day master, just going to ask why my sgm shutdown by itself.
it happens when i on the wifi and leave it for 5 minutes, the screen will locked.
and when i tried to unlock it my sgm was already turn off.
whats seems to be the problem???
im using cyanogen 7.2 RC 5.4 by squadzone.
hope someone can help.
THANKS IN ADVANCE
Same problem here
zheiwren said:
Good day master, just going to ask why my sgm shutdown by itself.
it happens when i on the wifi and leave it for 5 minutes, the screen will locked.
and when i tried to unlock it my sgm was already turn off.
whats seems to be the problem???
im using cyanogen 7.2 RC 5.4 by squadzone.
hope someone can help.
THANKS IN ADVANCE
Click to expand...
Click to collapse
I have exactly the same problem with my SGM I am runnig CM7.2 RC 5.4
Any guesses?
for resolve it you can wipe data and cache partition in the recovery
Samsung Galaxy Next Best said:
for resolve it you can wipe data and cache partition in the recovery
Click to expand...
Click to collapse
i already did
Try reflashing the rom.
yess !! For all newbes ====>>
after flashing your phone with CUstom rom or stock if you have problem reflash if CWM work or if dont work try with odine in download mode if doanload mode work is great for you past any Stock rom you wont [VER example 2.2,2.3 etc...etc] after this if all work fine and phone reset like factory you are free to past or not a custom rom is simple for all question about how to flash via CWM or odine searche in the XDA forum for [TUTORIAL] thanks and good luck !!! ^^
No no no guys.. don't bother with reflashing and stuff, that's not the problem.. I had the same problem and I googled it for months until I've learned its a Samsung wifi hardware related problem and mostly Galaxy devices are affected. Something is wrong when phone goes in standby. It continues to work but you can't wake it and you have to reinsert battery to get it on again.
The solution is to install a tiny app called Wake Lock, it's there on market.. it keeps phone awake even when you lock screen. My phone doesn't shut off anymore and I can finally rely on it. I don't have to think anymore and check all the time if the phone is off and if I'm going to miss a call...
The alternative is to turn off wifi before you lock screen but I think that most of us need wifi on all the time to get mails and messages on time
true, this is a samsung prob it gave me a hard time many months back.
but also make sure u've wiped data before flashing.
but seriously why is this in accessories?!
I flashed many ROMs and wiped data but my Mini was still shutting down.. the Wake Lock is the real fix, I had no shutdowns for months now
I have the same problem!
Me too have the same prob.. ny sgm also runs in rc5.4 shuts down itself
Sent from my GT-S5570 using Tapatalk
https://market.android.com/details?...t#?t=W251bGwsMSwxLDEsImV1LnRoZWRhcmtlbi53bCJd
try this app and set wake lock to CPU on, screen off... my phone is working for months without shutting down