Related
I think I may have soft bricked my HTC Raider.
I was attempting to flash CM9 on my HTC. I followed the pre-flash procedures (Wiping Data, etc). Then, once it was complete, I rebooted the phone. The phone could not get past the CM9 Blue Tunnel animation. I left it there for about an hour, but nothing happened. I can still access my recovery and bootloader. I have tried flashing another ROM, as well as restoring a Nandroid backup I made, but they all lead to the white HTC screen. My Raider has S-ON.
User MzzSarahx3 had an extremely similar case, except that person had an AT&T Vivid, as seen here:
http://forum.xda-developers.com/showthread.php?t=1416836&page=51
MzzSarahx3 managed to fix the problem by running an RUU, so that is why I believe I can fix my situation by doing the same. I am aware of the RUU Collection that Football uploaded, but clicking on a link on FileFactory will give me an error saying that all download slots are in use.
So could somebody please link me, or upload, an ICS RUU for the HTC Raider on Rogers? Help would be much appreciated.
Just means site is busy keep checking
Sent from my HTC PH39100 using xda premium
ronnie498 said:
Just means site is busy keep checking
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
I have been clicking on that link since this morning. And it still gives me the same message. I will continue to check, though.
Does anyone have an alternate solution?
The stock Bell ICS RUU should work fine on your Rogers Raider. ( I have a Bell Raider but installed it on my buddy's Rogers Raider).
I'm uploading the stock Bell ICS RUU to Depositfiles right now but its gonna take an hour. I'll update my post with the link when it's done.
You can probably find the stock Bell ICS RUU on various threads in the forum. I believe that's where I got it from originally.
Note that if you have unlocked your bootloader (via htcdev), the stock RUU will refuse to install !
LaZiODROID said:
The stock Bell ICS RUU should work fine on your Rogers Raider. ( I have a Bell Raider but installed it on my buddy's Rogers Raider).
I'm uploading the stock Bell ICS RUU to Depositfiles right now but its gonna take an hour. I'll update my post with the link when it's done.
You can probably find the stock Bell ICS RUU on various threads in the forum. I believe that's where I got it from originally.
Note that if you have unlocked your bootloader (via htcdev), the stock RUU will refuse to install !
Click to expand...
Click to collapse
Thank you very much for uploading it!
I am definitely looking forward to using my phone again!
BTW I have looked around for the Bell ICS RUU on these forums, but did not find anything. The closest thing I found was this:
http://forum.xda-developers.com/showthread.php?t=1672800&highlight=bell+ics+ruu
But they said it was not a RUU so.....
I have uploaded the Bell ICS RUU to DepositFiles. You're welcome!
Filename: RUU_HOLIDAY_ICS_35_S_BM_3.38.666.2_Radio_3.04.4740.11_34.29.701040.22_release_255916_signed.exe
http://depositfiles.com/files/ofalwm57q
LaZiODROID said:
I have uploaded the Bell ICS RUU to DepositFiles. You're welcome!
Filename: RUU_HOLIDAY_ICS_35_S_BM_3.38.666.2_Radio_3.04.4740.11_34.29.701040.22_release_255916_signed.exe
Click to expand...
Click to collapse
Umm, well I downloaded the RUU file you kindly uploaded, but I have encountered a problem.
ERROR [131]: CUSTOMER ID ERROR
I have tried many times. Got this error every time. I guess it is because I have a Rogers phone and attempting to update using a Bell RUU.
Any suggestions?
LeoCFZ said:
Umm, well I downloaded the RUU file you kindly uploaded, but I have encountered a problem.
ERROR [131]: CUSTOMER ID ERROR
I have tried many times. Got this error every time. I guess it is because I have a Rogers phone and attempting to update using a Bell RUU.
Any suggestions?
Click to expand...
Click to collapse
Damn... I don't remember having to do that for my buddy's Rogers Raider. Sorry.. it was some time ago.
He's here so I just checked his phone... we must have put in the SuperCID back then (which may accept any RUU?)
C:\Users\Master>fastboot getvar cid
cid: 11111111
finished. total time: 0.000s
and I ran mine (actual Bell Raider).:
C:\Users\Master>fastboot getvar cid
cid: BM___001
finished. total time: 0.000s
Feeling adventurous? I'm not sure if you need to be S-OFF to do this (or have unlocked bootloader, or even both) but...
You can change the CID via fastboot.
Fastboot commands that you can do: (thank you jmone from showpost.php?p=25187040&postcount=199)
(to check your current CID - write it down?)
fastboot getvar cid
(to write a new CID to the phone)
fastboot oem writecid 11111111 (where the 11111111 contains the CID you want - you can try the 11111111 (is that known as SuperCID?) or you can try mine, which is BM___001 as specified above)
(then reboot into bootloader mode)
fastboot reboot-bootloader
(then if it reboots back into fastboot mode, you can run this to verify your desired CID made it)
fastboot getvar cid
Then maybe the RUU will allow itself to install?
LaZiODROID said:
Damn... I don't remember having to do that for my buddy's Rogers Raider. Sorry.. it was some time ago.
He's here so I just checked his phone... we must have put in the SuperCID back then (which may accept any RUU?)
C:\Users\Master>fastboot getvar cid
cid: 11111111
finished. total time: 0.000s
and I ran mine (actual Bell Raider).:
C:\Users\Master>fastboot getvar cid
cid: BM___001
finished. total time: 0.000s
Feeling adventurous? I'm not sure if you need to be S-OFF to do this (or have unlocked bootloader, or even both) but...
You can change the CID via fastboot.
Fastboot commands that you can do: (thank you jmone from showpost.php?p=25187040&postcount=199)
(to check your current CID - write it down?)
fastboot getvar cid
(to write a new CID to the phone)
fastboot oem writecid 11111111 (where the 11111111 contains the CID you want - you can try the 11111111 (is that known as SuperCID?) or you can try mine, which is BM___001 as specified above)
(then reboot into bootloader mode)
fastboot reboot-bootloader
(then if it reboots back into fastboot mode, you can run this to verify your desired CID made it)
fastboot getvar cid
Then maybe the RUU will allow itself to install?
Click to expand...
Click to collapse
I typed in the commands and I got this:
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot oem writecid 11111111
... INFOvreg_set: request is duplicated id 14
INFO holiday_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 1.076s]
finished. total time: 1.076s
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot getvar cid
cid: ROGER001
finished. total time: 0.002s
So, that means the SuperCID did not manage to write. I searched around and found hints about something called Radio S-OFF or Gold Card, but it was for a different HTC phone...
Is there a guide to follow so i could get this?
BTW SuperCID would allow the user to use any RUU.
LeoCFZ said:
I typed in the commands and I got this:
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot oem writecid 11111111
... INFOvreg_set: request is duplicated id 14
INFO holiday_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 1.076s]
finished. total time: 1.076s
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot getvar cid
cid: ROGER001
finished. total time: 0.002s
So, that means the SuperCID did not manage to write. I searched around and found hints about something called Radio S-OFF or Gold Card, but it was for a different HTC phone...
Is there a guide to follow so i could get this?
BTW SuperCID would allow the user to use any RUU.
Click to expand...
Click to collapse
Ahhh.. so you need to be S-OFF it seems. The S-OFF procedure isn't super easy, but it's nice to have (because with S-OFF, the custom roms you install will be able to automatically flash their kernel. With S-ON, to run a custom rom, you need to flash the kernel separately... not a huge deal, but having S-OFF is convenient if you like to try different custom roms). To S-OFF, you have to be willing to void your phone's warranty.
Theres gotta be the Roger RUU out there somewhere (that is ICS). I have the Rogers Gingerbread RUU... but I think it will only work if you havent upgraded your phone to ICS yet...
LaZiODROID said:
Ahhh.. so you need to be S-OFF it seems. The S-OFF procedure isn't super easy, but it's nice to have (because with S-OFF, the custom roms you install will be able to automatically flash their kernel. With S-ON, to run a custom rom, you need to flash the kernel separately... not a huge deal, but having S-OFF is convenient if you like to try different custom roms). To S-OFF, you have to be willing to void your phone's warranty.
Theres gotta be the Roger RUU out there somewhere (that is ICS). I have the Rogers Gingerbread RUU... but I think it will only work if you havent upgraded your phone to ICS yet...
Click to expand...
Click to collapse
I also have the Gingerbread RUU and yes, it does not work. You were right about the ICS RUU out there somewhere.
I dug deeper into the comments of Football's thread on the Shipped RUU Collection to see if anyone had trouble downloading from FileFactory and somebody requested the Rogers ICS RUU mirror there. I downloaded it any now my cell is back to being operational!
http://forum.xda-developers.com/showthread.php?t=1338919&highlight=football&page=14
Thanks to LaZiODROID, ronnie498,and Gene Poole for all their help!
Well, I also like to make sure I don't make the same mistake again. Anyone know why my phone ended up the way it is?
LeoCFZ said:
I also have the Gingerbread RUU and yes, it does not work. You were right about the ICS RUU out there somewhere.
I dug deeper into the comments of Football's thread on the Shipped RUU Collection to see if anyone had trouble downloading from FileFactory and somebody requested the Rogers ICS RUU mirror there. I downloaded it any now my cell is back to being operational!
http://forum.xda-developers.com/showthread.php?t=1338919&highlight=football&page=14
Thanks to LaZiODROID, ronnie498,and Gene Poole for all their help!
Well, I also like to make sure I don't make the same mistake again. Anyone know why my phone ended up the way it is?
Click to expand...
Click to collapse
Amazing! Glad it worked out. Thanks for that link. I'll be archiving a copy of that Rogers RUU.
As for why your phone wouldnt boot with CM9... Is CM9 still in development? Maybe you should try a different ROM.
I'm using Pegasus right now and enjoying it. (As per kozmik I did have to do an extra step to get my LTE going, but it was pretty easy).
Remember to do a backup and your 4 wipes (data, cache, dalvik,and /system) before you install the rom, of course!
OK, thanks for the tips and the ROM suggestion.
I'll try Pegasus next.
LeoCFZ said:
OK, thanks for the tips and the ROM suggestion.
I'll try Pegasus next.
Click to expand...
Click to collapse
Thanks for this post. I had the same problem and was looking on the site to find an answer....
I uploaded all the RUU's here including the rogers one
http://forum.xda-developers.com/showthread.php?t=2013122
from my HTC PH39100 using xda premium
Here's today's brain teaser of a question: if you have Super CID on, do you need to have the bootloader re-locked in order to run any RUU?
Spazmogen said:
Here's today's brain teaser of a question: if you have Super CID on, do you need to have the bootloader re-locked in order to run any RUU?
Click to expand...
Click to collapse
Yes, I am pretty sure you do. I re-locked mine whenever I had to use a RUU.
Hi,
i tried to flash the Google Play RUU from here: http://forum.xda-developers.com/showpost.php?p=43517424&postcount=358
- I'm S-Off
- CID is GOOGL001
I get the following message when entering "fastboot flash zip RUU-HTC_One_GE-2.14.1700.15.zip": FAILED (remote: 41 model id check fail)
Any ideas?
Thanks
Max
Ok, got ID. The RUU's Adnroid.txt says: modelid: PN0712000
Hence, is the RUU not compatible with a German HTC One?
Munkelmann said:
Ok, got ID. The RUU's Adnroid.txt says: modelid: PN0712000
Hence, is the RUU not compatible with a German HTC One?
Click to expand...
Click to collapse
You should just have to add your MID to the android.txt file in the zip.
You could also change your MID if you really wanted:
http://forum.xda-developers.com/showthread.php?t=2322820
heard aryioni
crushalot said:
You should just have to add your MID to the android.txt file in the zip.
You could also change your MID if you really wanted:
http://forum.xda-developers.com/showthread.php?t=2322820
Click to expand...
Click to collapse
Thanks a lot. I meanwhile found out the same
So its safe to just change the MID in the RUU?
Munkelmann said:
Thanks a lot. I meanwhile found out the same
So its safe to just change the MID in the RUU?
Click to expand...
Click to collapse
I am not sure because it is a full RUU with all stock GE images.
I would think it is ok becasue you are s-off, but since it contains all the stock partitions I would ask in the main thread of:
http://forum.xda-developers.com/showthread.php?p=43517424#post43517424
Hi guys,
this is the first post for me here, and I hope to find help
Yesterday I got my HTC ONE but I found that the android version is jelly bean 4.1.2 which doesn't contain the IR TV app and the HDR camera option and other thing..
I tried to check for updates and it says that my phone is up to date already !!
I searched the internet for some help if I can download the official 4.2.2 firmware but I found that my phone model is not supported "Model: PN07110 and CID: HTC_332"
I want to update it manually to 4.2.2 and without root if it could
My mobile details:
Software #: 1.36.599.1
CID: HTC__332
Thanks you for responding
remove your imei and serial number from your post..
Go s-off, change your cid, and use an european ruu
After relock your phone and get the ota
redbull123 said:
remove your imei and serial number from your post..
Click to expand...
Click to collapse
Thanks for noticing me
Guich said:
Go s-off, change your cid, and use an european ruu
After relock your phone and get the ota
Click to expand...
Click to collapse
Thanks you, but how to change the cid? and where can I get the european ruu ?
In fastboot:
Code:
fastboot oem writecid 11111111
you will have the superCid.
Here the ruu
Guich said:
In fastboot:
Code:
fastboot oem writecid 11111111
you will have the superCid.
okay thank you dude I'm working on it now and I'll tell you the news
Click to expand...
Click to collapse
Sorry but can I use moonshine method and download the firmware that I want to use?
Use the revone tool, is better, faster and it will work
Guich said:
In fastboot:
Code:
fastboot oem writecid 11111111
you will have the superCid.
Here the ruu
Click to expand...
Click to collapse
guys I've done everything and I Flashed the RUU European rom but its still on 4.1.2 and not receiving OTA update.. anyhelp?
DONE!!
I change the cid to european one (HTC_032) and now its downloading the update
thanks you everyone!:good:
i have the same problem, no OTA Updates, no IR TV APP NO HDR Mode?? What is going on with the edition of the device??? We have to do all these in order to get updates??? Why we can not receive updates as it is????
Konstantinos.
MohammadZkert said:
guys I've done everything and I Flashed the RUU European rom but its still on 4.1.2 and not receiving OTA update.. anyhelp?
Click to expand...
Click to collapse
Guich said:
Go s-off, change your cid, and use an european ruu
After relock your phone and get the ota
Click to expand...
Click to collapse
Hello Guich,
I recently bought HTC One with the same CID but different model id...
i.e : CID : HTC__332
Model I.D : PN0711000
HBOOT : 1.44.0000
Radio: 4A.15.3250.22
Now i did follow you step by step as carefully as i could because its my first time with changing RUU's, I did root some htc handsets in the past but thats the only knowledge i have regarding android.
Anyways i gained S-Off Using revone and downloaded the RUU you posted, but while installing that RUU i get this error
[Error 131 : Invalid Model ID]
Can you guide me to a specific RUU of my current model or a simpler guide to changing Model ID because the following guide http://forum.xda-developers.com/showthread.php?t=2322820 is too difficult and i cant seem to understand it, maybe you can help me out.. i would be very grateful to you.
adeelazmat said:
Hello Guich,
I recently bought HTC One with the same CID but different model id...
i.e : CID : HTC__332
Model I.D : PN0711000
HBOOT : 1.44.0000
Radio: 4A.15.3250.22
Now i did follow you step by step as carefully as i could because its my first time with changing RUU's, I did root some htc handsets in the past but thats the only knowledge i have regarding android.
Anyways i gained S-Off Using revone and downloaded the RUU you posted, but while installing that RUU i get this error
[Error 131 : Invalid Model ID]
Can you guide me to a specific RUU of my current model or a simpler guide to changing Model ID because the following guide http://forum.xda-developers.com/showthread.php?t=2322820 is too difficult and i cant seem to understand it, maybe you can help me out.. i would be very grateful to you.
Click to expand...
Click to collapse
You have to use that guide
However, if it's very difficoult for you use that guide, i can help you with TeamViewer.
Maybe Tonight.
I will send you a pm when i can
p.s Your phone need to be at 100%
Hi, all. I get a very wired cid in my HTC one t528w(retails for China, I think.).
C:\Users\Andes\Downloads\adb-fastboot>fastboot getvar cid
cid: %? ?
finished. total time: 0.003s
as you can see I use 'cmd' to get my cid, I get a garbled cid. but mid is alright: mid: PM6012000. Right now the phone is unable to boot normally to the home screen, but only the fastboot. So I am trying to use RUU to flash the phone, but as the cid is wired, every time I flash the phone using RUU, it shows 'cid error'(132). I don't know what I can do now. I even can't flash a supercid to the phone, because, when I connect the phone to my pc, and try 'adb shell', it just shows 'device not found'. That's very strange.
hey dude try this . my cid was weird too. now im htc_001 on pn07100
may T 4d be w U =)
http://forum.xda-developers.com/showthread.php?t=2596527
wiwengweng said:
Hi, all. I get a very wired cid in my HTC one t528w(retails for China, I think.).
C:\Users\Andes\Downloads\adb-fastboot>fastboot getvar cid
cid: %? ?
finished. total time: 0.003s
as you can see I use 'cmd' to get my cid, I get a garbled cid. but mid is alright: mid: PM6012000. Right now the phone is unable to boot normally to the home screen, but only the fastboot. So I am trying to use RUU to flash the phone, but as the cid is wired, every time I flash the phone using RUU, it shows 'cid error'(132). I don't know what I can do now. I even can't flash a supercid to the phone, because, when I connect the phone to my pc, and try 'adb shell', it just shows 'device not found'. That's very strange.
Click to expand...
Click to collapse
Wrong forum, This is the HTC One M7 (MIDN07XXXXX) forum
PM6012000 is HTC One S released in 2012. Your forum is there: http://forum.xda-developers.com/htc-one-s
ivangs2 said:
hey dude try this . my cid was weird too. now im htc_001 on pn07100
may T 4d be w U =)
http://forum.xda-developers.com/showthread.php?t=2596527
Click to expand...
Click to collapse
thanks for your response. But I cannot unlock my phone now, because the token is generated with the cid, I think. I cannot get a correct cid, so that I cannot get a rooted device. what do you think?
Hi all,
I've tried to install WWE stock rom on this device, but now is bricked. I can get into fastboot and bootloader, but I can't install anything now. I've tried from fastboot to install the one's dedicated to my device from here:
http://forum.xda-developers.com/showthread.php?t=2617159
device info (before trying to re-install) were:
tampered/unlocked
m7 cdug pvt ship s-on rh
hboot: 2.23.000
radio: u2.05.3501.18
open dsp-v28.120.274.0328
qsc-1237.18.19.0528
os-2.25.1402.1
e-mmc-boot 2048mb
cid/mid: HTCCN703
now CID is gone, but it's still unlocked and S-ON, and
hboot is 2.27.0000
radio u3.08.35.07.17
open dsp-v31.120.274.0617
qsc-1237.25.32.0717
os-2.25.1402.1
eMMC-boot 2048mb
PN0771000
How can I restore it in a way, then to install a WWE version?
ady_uaic said:
Hi all,
I've tried to install WWE stock rom on this device, but now is bricked. I can get into fastboot and bootloader, but I can't install anything now. I've tried from fastboot to install the one's dedicated to my device from here:
http://forum.xda-developers.com/showthread.php?t=2617159
device info (before trying to re-install) were:
tampered/unlocked
m7 cdug pvt ship s-on rh
hboot: 2.23.000
radio: u2.05.3501.18
open dsp-v28.120.274.0328
qsc-1237.18.19.0528
os-2.25.1402.1
e-mmc-boot 2048mb
cid/mid: HTCCN703
now CID is gone, but it's still unlocked and S-ON, and
hboot is 2.27.0000
radio u3.08.35.07.17
open dsp-v31.120.274.0617
qsc-1237.25.32.0717
os-2.25.1402.1
eMMC-boot 2048mb
PN0771000
How can I restore it in a way, then to install a WWE version?
Click to expand...
Click to collapse
post here for windows HTC phone mate, you'll get a quicker response, beside, alot of us here are anti-windows phones lol even if you do just live down the road from me: http://forum.xda-developers.com/htc-8x
Seanie280672 said:
post here for windows HTC phone mate, you'll get a quicker response, beside, alot of us here are anti-windows phones lol even if you do just live down the road from me: http://forum.xda-developers.com/htc-8x
Click to expand...
Click to collapse
I'm not sure I follow you. This is 802W, not windows phone.
The error: remote not allowed.
ady_uaic said:
I'm not sure I follow you. This is 802W, not windows phone.
Click to expand...
Click to collapse
Sorry, your cid related to a windows phone when I googled it, ive never seen those details before, I think you've already found everything to do with the 802w, but i'll have a look around too.
Seanie280672 said:
Sorry, your cid related to a windows phone when I googled it, ive never seen those details before, I think you've already found everything to do with the 802w, but i'll have a look around too.
Click to expand...
Click to collapse
thanks a lot mate!
I think the only thing I need is to flash a stock RUU (doesn't matter which version, as long as it works, then to do again all the processes: unlock bootloader, s-off, custom recovery, root, stock WWE RUU).
ady_uaic said:
thanks a lot mate!
I think the only thing I need is to flash a stock RUU (doesn't matter which version, as long as it works, then to do again all the processes: unlock bootloader, s-off, custom recovery, root, stock WWE RUU).
Click to expand...
Click to collapse
trouble is, your current OS is 2.25.1402.1 and thats an OTA not an RUU, you need a full RUU, this one may work:
PN07IMG_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.30.1402.1_ Radio_1237.25.32.0717_release_332510_signed_2_4.zip http://d-h.st/NAf which is the next full RUU up from yours.
Seanie280672 said:
trouble is, your current OS is 2.25.1402.1 and thats an OTA not an RUU, you need a full RUU, this one may work:
PN07IMG_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.30.1402.1_ Radio_1237.25.32.0717_release_332510_signed_2_4.zip http://d-h.st/NAf which is the next full RUU up from yours.
Click to expand...
Click to collapse
I already tried that mate, thanks!
it returns after signature checking...:
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
ady_uaic said:
I already tried that mate, thanks!
it returns after signature checking...:
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Click to expand...
Click to collapse
Umm, im a bit confused, its a zip file not an official RUU, im just downloading it to take a closer look, how are you trying to flash it ?
EDIT: ok its an RUU zip, it need to be flashed in fastbootRUU mode, using fastboot commands, bootloader needs to be locked as you are s-on, Its should work as this OTA states that RUU was your next update if you got it via OTA, OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_TO THIS ROM VERSION 2.30.1402.1 --------------------- FROM THIS ROM VERSION-2.25.1402.1 SAME AS YOURS_release_332539.zip - 50.49 MB
Seanie280672 said:
Umm, im a bit confused, its a zip file not an official RUU, im just downloading it to take a closer look, how are you trying to flash it ?
EDIT: ok its an RUU zip, it need to be flashed in fastbootRUU mode, using fastboot commands, bootloader needs to be locked as you are s-on, Its should work as this OTA states that RUU was your next update if you got it via OTA, OTA_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_TO THIS ROM VERSION 2.30.1402.1 --------------------- FROM THIS ROM VERSION-2.25.1402.1 SAME AS YOURS_release_332539.zip - 50.49 MB
Click to expand...
Click to collapse
from fastboot, using the command line:
fastboot flash zip ....zip
I've locked back the bootloader, and still doesn't work:
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
and no, it was an UNICOM version, and my friend tried to update to WWE.
ady_uaic said:
from fastboot, using the command line:
fastboot flash zip ....zip
I've locked back the bootloader, and still doesn't work:
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
and no, it was an UNICOM version, and my friend tried to update to WWE.
Click to expand...
Click to collapse
You cant change to WWE without s-off, tell your friend to leave it alone lol, it requires you to change cid and mid etc first, then flash the corrisponding firmware and then the RUU.
Rename your RUU to rom.zip for ease, then issue these commands :
make sure its this RUU, not the WWE one PN07IMG_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.30.1402.1_ Radio_1237.25.32.0717_release_332510_signed_2_4.zi p
fastboot oem rebootRUU (case sensetive, type it exactly like that)
Now your booted to the black HTC screen. Make sure your Rom.zip file is in your adb/fastboot folder
fastboot flash zip Rom.zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately) HTC typo, should be please flash immediately
Make sure device is still in ruu mode(black HTC screen)
now simply reflash the rom.zip, fastboot flash zip Rom.zip
Let it run and it should finish this time, make sure it says successfull at the end, if it does then fastboot reboot, you'll be full stock, if failed, report back here before doing anything else, dont reboot out of RUU mode.
The first flash is just a preupdate, the 2nd flash flashes the rom and firmware files.
Yes mate, I know that. Now I'm trying to put back any ROM then I will do the right procedure to install WWE.
But, now doesn't work at all. not even with that command (and it's not necessary to rename the zip file, as long as it's only one in the adb folder). I already tried that, and it doesn't work .
L.E. oh, wait mate! I think it works now! I'm waiting for the installation to be finished. do you have a good tutorial to upgrade to WWE version?
ady_uaic said:
Yes mate, I know that. Now I'm trying to put back any ROM then I will do the right procedure to install WWE.
But, now doesn't work at all. not even with that command (and it's not necessary to rename the zip file, as long as it's only one in the adb folder). I already tried that, and it doesn't work .
L.E. oh, wait mate! I think it works now! I'm waiting for the installation to be finished. do you have a good tutorial to upgrade to WWE version?
Click to expand...
Click to collapse
Im not really familiar with the dual sim versions, dont know how to s-off them, all the knowlege im giving you is just based on my M7, but to convert you will need to get s-off first, change your cid and mid to match the WWE RUU and then you'll need to flash the WWE full RUU as close to as possible to the version number you have now so that the firmware swap over goes smoothly.
Seanie280672 said:
Im not really familiar with the dual sim versions, dont know how to s-off them, all the knowlege im giving you is just based on my M7, but to convert you will need to get s-off first, change your cid and mid to match the WWE RUU and then you'll need to flash the WWE full RUU as close to as possible to the version number you have now so that the firmware swap over goes smoothly.
Click to expand...
Click to collapse
will do, thanks!
ady_uaic said:
will do, thanks!
Click to expand...
Click to collapse
When the flash has finished, let me know if it boots ok please and was successful.
Seanie280672 said:
When the flash has finished, let me know if it boots ok please and was successful.
Click to expand...
Click to collapse
with the chinese version yes, it boots ok. now I'm trying to use this tutorial for WWE: http://forum.xda-developers.com/showthread.php?t=2559891
ady_uaic said:
with the chinese version yes, it boots ok. now I'm trying to use this tutorial for WWE: http://forum.xda-developers.com/showthread.php?t=2559891
Click to expand...
Click to collapse
just had a quick read through it, I would be cautious flashing HBOOT before getting s-off, if I was you I would use the moonshine s-off method for your HBOOT and device version first before flashing the HBOOT, make sure these have not changed after flashing an updated RUU.
A bad HBOOT flash will hard brick your device.
Seanie280672 said:
just had a quick read through it, I would be cautious flashing HBOOT before getting s-off, if I was you I would use the moonshine s-off method for your HBOOT and device version first before flashing the HBOOT, make sure these have not changed after flashing an updated RUU.
A bad HBOOT flash will hard brick your device.
Click to expand...
Click to collapse
I will have a look right now. what do you mean by device version?
ady_uaic said:
what do you mean by device version?
Click to expand...
Click to collapse
sorry, forget that, they are all for the 802w, threw me out a bit as he labelled the moonshine one as (for the 802w version)
ps, firewater no longer works, its been discontinued, lets hope your not on that HBOOT. :fingers-crossed:
Seanie280672 said:
sorry, forget that, they are all for the 802w, threw me out a bit as he labelled the moonshine one as (for the 802w version)
ps, firewater no longer works, its been discontinued, lets hope your not on that HBOOT. :fingers-crossed:
Click to expand...
Click to collapse
problem solved. now it has wwe. thanks mate!