I have a problem with minicm7 2.2.1 and nAa 13 kernel,the auto-brightness is not working ,i try many thing and i can't resolve it,and i have a problem with the led notification,is not working properly,can anyone say how to resolve it?thanks
sergiu.dan7 said:
I have a problem with minicm7 2.2.1 and nAa 13 kernel,the auto-brightness is not working ,i try many thing and i can't resolve it,and i have a problem with the led notification,is not working properly,can anyone say how to resolve it?thanks
Click to expand...
Click to collapse
Try to Reflash the Rom and report. If the problem still persists I can't help you
I reflashed 3 times the kernal and the ROM,but it still have the problems,minicm7 nightly can resolve the problems?thanks
sergiu.dan7 said:
I reflashed 3 times the kernal and the ROM,but it still have the problems,minicm7 nightly can resolve the problems?thanks
Click to expand...
Click to collapse
Nightly is not for daily use..
Inviato dal mio E15i
sergiu.dan7 said:
I have a problem with minicm7 2.2.1 and nAa 13 kernel,the auto-brightness is not working ,i try many thing and i can't resolve it,and i have a problem with the led notification,is not working properly,can anyone say how to resolve it?thanks
Click to expand...
Click to collapse
sometime its happened on first installation..
just llke he said..
try to flash the latest kernel again - backup
then factory reset, wipe dalvik, etc (important!)
flash ROM
done!
Ok,i will try it! thanks a lot
Fix for auto brightness:
http://forum.xda-developers.com/showthread.php?t=1545402
Flash via cwm recovery.
Remember to thank yousef-p for his fix.
And for LED notification remove lights.shakira.so from system/lib/hw with root explorer.
then go to cyanogenmod settings>interface>led notifications>advanced and tick always pulse and blend notifications.
Hope this solve your problam.
Sent from my E15i using Tapatalk 2
Thank you very much,the auto-brightness seems to work,but i delete that file with root explorer and it still don't work,the led is not working even when the battery starts discharging from 10%,thanks again!
sergiu.dan7 said:
Thank you very much,the auto-brightness seems to work,but i delete that file with root explorer and it still don't work,the led is not working even when the battery starts discharging from 10%,thanks again!
Click to expand...
Click to collapse
Hmm...
Go to cyanogenmod settings>interface>led notifications>unconfigured and select Massaging.
Now change LED Mode to "use application settings" and choose flash color and blink rate.
Now you can test the notification with "Flash test" option.
Now tap on the save button. (Don't press back button)
And do those steps again for Missed Call.
ElmirBuljubasic said:
Nightly is not for daily use..
Inviato dal mio E15i
Click to expand...
Click to collapse
Not true! All nightlies that i've tried have been very stable and reliable..
Have you tried any?
Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Одг: [Q] Jelly Bean 4.1.2 hangs a lot!
camtista said:
Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Click to expand...
Click to collapse
Use latest xxlq4 version, and some of custom kernel. I do not have lag at all with it.
Sent from Galaxy S Advance
Mine hangs a lot tok when i open the YouTube app in the first video, i must be tapping the first 10 seconds the screen to respond and if i have luck it doesn't hangs, and if it does, for me there is no other way out than a hard reset...
Sent from my GT-I9070 using xda app-developers app
even my phone used to lag a lot.
just root ur phone, use a custom kernel like cocre or thunderzap.
i use cocore 3.3 and in no frills, set governor to pegasusq and i/o to sio.
it will work smoothly. i play gta vice city just fine
---------- Post added at 10:48 AM ---------- Previous post was at 10:44 AM ----------
camtista said:
Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Click to expand...
Click to collapse
i am using stock rom XXLQ4 with cocore 3.3 kernel and no frills config: governor-pegasusq and i/o-sio
still if u feel the phone lags which i dont think it will, u can enable forced gpu rendering in developer options, although u may experience screen flickering.
try Thunderzap 4.1 kernel and wipe cache/dalvik. See if there's any difference. It worked for me.
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
mjz2cool said:
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
Click to expand...
Click to collapse
It has been a long time since we have custom kernels and roms. Use CoCore E kernel and some custom ROM. Or some CM ROM.
shut_down said:
It has been a long time since we have custom kernels and roms. Use CoCore E kernel and some custom ROM. Or some CM ROM.
Click to expand...
Click to collapse
i'm using cocore 8.8, and deodexed stock lqe, and i added some mods like ink effect, aosp lockscreen toggle and crt-off
mjz2cool said:
i'm using cocore 8.8, and deodexed stock lqe, and i added some mods like ink effect, aosp lockscreen toggle and crt-off
Click to expand...
Click to collapse
Debloat, remove apps from system that is not of use. Like that Samsung Chat etc...
http://forum.xda-developers.com/showthread.php?t=2200954
shut_down said:
Debloat, remove apps from system that is not of use. Like that Samsung Chat etc...
http://forum.xda-developers.com/showthread.php?t=2200954
Click to expand...
Click to collapse
already done, when i deodexed it i made a flashable zip that removes all files from /preload/symlink/system/app, /system/app and /system/framework, and then copies all the deodexed files to these locations, and roots it and adds dsp manager.
mjz2cool said:
already done, when i deodexed it i made a flashable zip that removes all files from /preload/symlink/system/app, /system/app and /system/framework, and then copies all the deodexed files to these locations, and roots it and adds dsp manager.
Click to expand...
Click to collapse
If that hangs to you, try CM10.1 with PegasusQ/SIO gevernor/scheduler.
shut_down said:
If that hangs to you, try CM10.1 with PegasusQ/SIO gevernor/scheduler.
Click to expand...
Click to collapse
does cm 10.1 have a better battery life than cm 10.2? cause in cm 10.2 it was quite terrible, only about half a day with wifi off (i never use data connection, always turn that of ) and in standby most of the time.
edit- the battery is fine, it's almost new, and in stock rom i can get about 1 and-a-half day with wifi almost constantly on
mjz2cool said:
does cm 10.1 have a better battery life than cm 10.2? cause in cm 10.2 it was quite terrible, only about half a day with wifi off (i never use data connection, always turn that of ) and in standby most of the time.
Click to expand...
Click to collapse
Yeeees. I think similar to stock. I am on CM10.2 based ROM now, and CM10.1 was better for me.
shut_down said:
Yeeees. I think similar to stock. I am on CM10.2 based ROM now, and CM10.1 was better for me.
Click to expand...
Click to collapse
i think i'm gonna try that one for a day or so, see if the battery life is indeed better than cm 10.2.
only downside other than that is the high vibration strength, is there anyway to lower that? (only for buttons and certain onscreen things)
and is there much difference in battery life between 10.2 and 10.1?
edit- just installed it, but wifi always takes about 2 minutes to turn on, so i'm back to stock based
mjz2cool said:
i think i'm gonna try that one for a day or so, see if the battery life is indeed better than cm 10.2.
only downside other than that is the high vibration strength, is there anyway to lower that? (only for buttons and certain onscreen things)
and is there much difference in battery life between 10.2 and 10.1?
edit- just installed it, but wifi always takes about 2 minutes to turn on, so i'm back to stock based
Click to expand...
Click to collapse
I did not have that problem on 10.1. Did you use 1117 version? Use 1117+phone.apk from newest one.
shut_down said:
I did not have that problem on 10.1. Did you use 1117 version? Use 1117+phone.apk from newest one.
Click to expand...
Click to collapse
where can i find 1117? the only one i can find is 1116 (except for the 0xxx ones in the archive)
mjz2cool said:
where can i find 1117? the only one i can find is 1116 (except for the 0xxx ones in the archive)
Click to expand...
Click to collapse
http://d-h.st/168
R_a_z_v_a_n said:
http://d-h.st/168
Click to expand...
Click to collapse
so that one hasn't got the wifi problem? that would be great thanks for the link
and if so, is it also fixed in 10.2? that would be even better
edit- still the same problem, most of the time it takes around 2 minutes to turn on wifi, and sometimes it doesn't even turn on and i have to reboot.
JB 4.1.2
mjz2cool said:
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
Click to expand...
Click to collapse
If you haven't done yet, root your phone. Then flash a custom recovery. CWM or TWRP. Then flash a custom kernel or a custom rom.
I think the Jelly Bean stock-rom isn't recommended for this phone. It didn't use to lag, when I used Gingerbread 2.3. After flashing Jelly Bean it hanged a lot!
Now, i rooted it, installed CWM and the custom rom Pure Vanilla. It doesnt lag anymore!
Greetings and nice luck
camtista said:
If you haven't done yet, root your phone. Then flash a custom recovery. CWM or TWRP. Then flash a custom kernel or a custom rom.
I think the Jelly Bean stock-rom isn't recommended for this phone. It didn't use to lag, when I used Gingerbread 2.3. After flashing Jelly Bean it hanged a lot!
Now, i rooted it, installed CWM and the custom rom Pure Vanilla. It doesnt lag anymore!
Greetings and nice luck
Click to expand...
Click to collapse
it always froze even when using a custom kernel, but now i'm using cm11 it's not freezing anymore
hi all
i can not see Stay awake and Back button in Display,gestures & buttons
anyone suggestion ???
Are you running stock rom with root?
Or you're using a custom rom?
However, in stock rom, with the latest update, there isn't the option for the back button.
For stay awake i don't know
Guich said:
Are you running stock rom with root?
Or you're using a custom rom?
However, in stock rom, with the latest update, there isn't the option for the back button.
For stay awake i don't know
Click to expand...
Click to collapse
i am running stock rom without root
kia1349 said:
i am running stock rom without root
Click to expand...
Click to collapse
Then, in stock rom, with latest base avaiable, is normal that you don't have the button for set the back button.
For stay awake i don't know...
Sent from ONE with Tapa4 Beta
Guich said:
Then, in stock rom, with latest base avaiable, is normal that you don't have the button for set the back button.
For stay awake i don't know...
Sent from ONE with Tapa4 Beta
Click to expand...
Click to collapse
thanks a lot my dear friend
Nothing!
But use the thanks button for thanking
kia1349 said:
hi all
i can not see Stay awake and Back button in Display,gestures & buttons
anyone suggestion ???
Click to expand...
Click to collapse
I have the same issue.
My previous rom version was 1.28.401.7 (stock + rooted).
I updated to the latest stock 1.29.401.16R and the option disappeared.
I would like to know if users with the latest version have the same issue, perhaps it's a suppression from HTC to preserve screens (like Samsung) even if I don't really think so.
mika.andria said:
I have the same issue.
My previous rom version was 1.28.401.7 (stock + rooted).
I updated to the latest stock 1.29.401.16R and the option disappeared.
I would like to know if users with the latest version have the same issue, perhaps it's a suppression from HTC to preserve screens (like Samsung) even if I don't really think so.
Click to expand...
Click to collapse
i rooted my device and now running android revolution 9.2 on my device
with the this version , i have the same issue
hi in stock ROM we can turn off the light of the 2 buttons , now i change to custom ROM CM10.1 i cant turn off, anyone know how? some App or settings?
asyba said:
hi in stock ROM we can turn off the light of the 2 buttons , now i change to custom ROM CM10.1 i cant turn off, anyone know how? some App or settings?
Click to expand...
Click to collapse
Have you gone deep into settings? It should be possible.
AlexGardunio said:
Have you gone deep into settings? It should be possible.
Click to expand...
Click to collapse
if you know just tell me were the option is.. xd
I looked and looked and couldn't find such option in Maclaw's CM 10.1 as well. Help appreciated.
asyba said:
hi in stock ROM we can turn off the light of the 2 buttons , now i change to custom ROM CM10.1 i cant turn off, anyone know how? some App or settings?
Click to expand...
Click to collapse
adgud said:
I looked and looked and couldn't find such option in Maclaw's CM 10.1 as well. Help appreciated.
Click to expand...
Click to collapse
There is none apparently for our s3 mini, there are available for other devices though, don't know why
I have CM11, and whenever I get a notification, the 2 buttons near the Home button are flashing on and off.
I'd like to know to disable the flashing - not the light from the buttons itself (i.e. turning off the light completely).
Feliks141 said:
I have CM11, and whenever I get a notification, the 2 buttons near the Home button are flashing on and off.
I'd like to know to disable the flashing - not the light from the buttons itself (i.e. turning off the light completely).
Click to expand...
Click to collapse
AFAIK this feature depends on the kernel.
Try fo flash another kernel for CM-based ROMs
moonryder said:
AFAIK this feature depends on the kernel.
Try fo flash another kernel for CM-based ROMs
Click to expand...
Click to collapse
And what kernel would that be?
Feliks141 said:
And what kernel would that be?
Click to expand...
Click to collapse
look HERE
I prefer NEXT Kernel from Android-Andi
And as always: Make a backup before