Related
Hey fellas,
Got my hands on another case for the Note II, this time it is the Tridea Italian leather flip case. It is reminiscent of the SGP Valentinus case, although it is much more affordable and not as bulky. It's a folio style case, so it features a front flap to keep your display protected. Unfortunately there is nothing to hold it in place, so it tends to flap around. The ports and cutouts are spot on, however.
Check out the full video review below;
great review
Cheers! Happy to help
do you reccomend this case mate? i would like one with the flip cover to protect the screen, but would also like a case tough enough to protect my phone in case of drops or bumps. it looks like flip covers are all "light" protective, while tough cases are way too bulky or do not provide any protection to the screen (no plastic film protectors for me! i hate them!). thank you a lot!!!
The flap actually isn't a big deal. I've been using a similar case for a week now and unless you have a giant pocket the flap stays shut.
I actually prefer not to have a magnetic or grommet styled securing device.
And let's face it. as for drop protection, these type of cases just don't compare to the UAG or Otterbox cases.
R: Video Review: Tridea Italian Leather Flip Folio
apallohadas said:
The flap actually isn't a big deal. I've been using a similar case for a week now and unless you have a giant pocket the flap stays shut.
I actually prefer not to have a magnetic or grommet styled securing device.
And let's face it. as for drop protection, these type of cases just don't compare to the UAG or Otterbox cases.
Click to expand...
Click to collapse
So basically you say that this case goes for style and look and moderate protection, while the others go for enhanced protection, right? Just as I thought... Does it exist a tough case as uag but with a flap or such to cover the screen? I am afraid because of 4 hours of commuting a day... A little bump or sudden train braking may make me drop my phone.. And I wouldn't trust only a plastic film to protect the screen. Holsters like otterbox defender one, on the other hand, are uncomfortable to use while in the crowd and one handed..
Thank you for your suggestion, this case looks superb, but maybe it's not the right thing for me...
Galaxy Note II - Alliance Rom
I keep hoping for someone to make a UAG with a flip cover.
Sent from my SAMSUNG-SGH-I317 using xda premium
I just returned the case to Amazon for 2 reasons.
1- The flap was warped - and did not cover the screen right.
2- There is virtually no top or bottom protection - the device is held only on the sides - the top and bottom are naked.
On the plus side - I have'nt seen a product with this good quality - in a long time. It is a really well made case - just not tough and protective enough for my taste.
Im using this one for few months and I like it.
https://www.youtube.com/watch?v=CUNJu0U0Wl4&feature=youtube_gdata_player
Sent from my SGH-T889 using xda app-developers app
I got my new Otterbox Defender case from AT&T today. Only paid $42 with shipping and tax so that wasn't too bad.
I weighed it against my Seidio Active case and holster and the Otterbox with holster weighs 12.5 ounces and the Active case with holster is 10.5 ounces if anybody was interested. Removing the clear plastic protective cover from the Otterbox lightens it by 0.15 ounces or about 4 grams.
I will say this thing feels like it will take a lot of abuse before the phone will break. That is of course, unless the screen is hit by a direct impact that the case can't deflect. Remember, there is a lot of screen area so anything protruding like a rock that makes initial contact with the screen will probably break the screen. No case will stop that.
Things I don't like about the Defender whether I knew about it when ordering or not......
yeah it adds a lot of bulk but not too bad. The volume up and down buttons are not very responsive but I suspect some electrical tape on the inside of the case over the phone buttons should help with that. The power button is actually a little too responsive for my taste. It is very easy to click the power button which sucks because the volume buttons have to be pressed hard and the thumb is usually over near the power button when operating the volume buttons. This leads to easy power button pressing.
The plastic case creaks like a wooden floor in a turn of the century house. What the hell is all of this about. Whether you squeeze the case side to side or twist the phone slightly. I suspect it is the outside case rubbing against the inner hard plastic case. I will try some baby powder on that. Still, the case does not have the rigidity that I was hoping for. If you manually twist the phone case at opposite corners the thing flexes way easily.
I called myself from my home phone, walked away and left the note 2 on the counter. I did not hear any echo from either phone as others have reported. This may show up later thought. If the phones are close together then echo can be present.
The plastic protective cover that comes with the case is garbage. Plain and simple. Yes there is a gap between the plastic and the phone screen. Very annoying. I took the plastic off within a few minutes. I have my own screen protector on it anyway.
I like the charging port and headphone port being covered with the rubber plugs.
When the case is put in the holster there is little leeway where the holster snaps into the detent in the phone edge. Several times I have found that the phone had to be adjusted a bit in order for the case to snap into the holster firmly. This may be a problem down the line or I might just modify it so that this makes a positive connection more easily.
This isn't really a comparison between the Active case and the Defender but I thought I would point out a few things.
I don't like having to use the Defender holster as a kickstand for the phone. The Active case has a built in stand in the case.
I do like the protective lip around the screen of the Defender which is made up of the softer outer shell and the hard plastic inner shell. The outside is not soft and gummy like silicone (like the Active) but a little harder. Kind of like a hard rubber but not as hard as a standard hard plastic if that makes any sense. It has a good feel to it. If the Defender is laid face down the hard lip does nothing to keep it from sliding. If laid on its back it resists sliding a little better depending on the surface. It is the opposite with the Active case. The Active has the silicone lip on the face and keeps the phone from sliding around if place face down. If the Active is placed on its back it will slide because the outside part is hard plastic.
The camera has a nice cutout with a lot of plastic protruding around it. The only way this camera lens is getting damages is if something goes right into the cutout and hits the lens directly. Getting to the stylus is very easy.
Ok, I did take the outer cover off and rubbed some baby powder to the inside. The creaking noise is diminished but still there.
I will try out the otterbox for a while and see how I like it. I work in a factory so it is highly plausible that this could fall off of a 12 foot ladder onto concrete. If I worked in an office I would not be using this case most likely.
I really like the look of the Active case in red much better than the otterbox. Fortunately, I place practicality over fashion generally.
Either way, I will hang on to the case and see what happens. Considering that both of these cases have similar MSRP (prices) the value is definitely in the Otterbox as far as material and engineering. The Active case needs to have a little more engineering and firmer material around the screen. in order to ask as much money as they do.
My biggest issue with the Defender is two fold:
1) Face it, this is an UGLY utilitarian looking case hiding our sexy thin phone. They did NOTHING to add any sex appeal to this case. It's like putting a bikini model in a full length raincoat and buttoning every snap.
2) The plastic screen protector feels cheap, scratchy and provides too much drag on the s-pen.
I got my commuter a few hours ago. It's pretty nice looking, the buttons aren't too hard to press, the cutouts are perfect, and it comes with a screen protector which I choose not to use. I couldn't ask for more from it. I also feel like it's very protective and would survive a 6 ft drop (even though im 5 ft).
Sent from my SGH-T889 using xda app-developers app
Note_2 said:
I got my commuter a few hours ago. It's pretty nice looking, the buttons aren't too hard to press, the cutouts are perfect, and it comes with a screen protector which I choose not to use. I couldn't ask for more from it. I also feel like it's very protective and would survive a 6 ft drop (even though im 5 ft).
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I haven't had the opportunity to hold the commuter series for this phone. Most of the cases for this phone need to be ordered since nobody seems to have anything in stock for this phone, around where I live, and I live in a decent sized city.
I got the commuter for $35 shipped on amazon. 3-5 day shipping, ordered Wednesday and got it earlier today even though it was expected tomorrow to friday! I tried to buy one closest to me for a decent price and the seller accessory net did great.
Sent from my SGH-T889 using xda app-developers app
I too have the creaking issue with the Defender. Mine(two of them) also creak and crackle. The plastic part that snaps together does not snap tightly thus causing some play which in turn causes the feeling that there is movement underneath and the creaking sounds. I got a replacement on the first one for this and the second one they sent also does this.
Otter customer service is great but the product right now imo is subpar
It is probably going to creak because it is suppose to flex... that is the whole point of the case absorbing impacts.
My biggest gripe about the Defender case is that dust makes it way in between the case's plastic screen protector and the phone's glass screen. It enters at the Home button mostly and at the top opening for the sensors. I have to open the case at least once a week and wipe out the dust. It's mainly fabric debris from my jeans pocket so I don't think it's anything scratchy.
honestly i hate my commuter case,its to damned fat,but when i drop my 700$ phone ,im happy, strange how that works
oddly enough, the only time I have dropped my Note 2 is when I used the otterbox Defender holster. If the phone case is pushed back and down in the holster when inserting , then the holster tab doesn't fully lock into the notch in the case. I thought I had it snapped in and it fell about 42 inches, I have a 36 inch inseam, and hit the concrete floor. Of course, this is a walk in the park for the Defender case so naturally there was no damage or marks on the case at all, and I wasn't worried about it when I picked the phone up.
My Active case has a much better spring loaded latch design so it is impossible for this to happen.
I actually got my knife out and made a little adjustment on the case notch so this won't happen again.
Really torn right now between purchasing the Commuter case from Otterbox or picking up one of the UAG cases for my note 2. I see that the Otterbox offers a two layer case vs the UAG single layer. Also the Commuter has covers for the ports and the UAG does not. Also for those that do own either or both, which do you orefer and why?
Sent from my SCH-I605 using Tapatalk 2
2 layers or a single molded layer - both offer very similar level of protection. I played with Commuter, but pass on it. Using UAG now. Too many advantages over Commuter. The back is less slippery, and has standoff "feet" to create friction with a surface; Commuter is easier to accidentally push/slide off the table with slippery surface (like grass top or granite). Also feels less slippery in my hand (UAG that is). One piece is a lot easier to take off if you need to change battery or remove card. Design of volume/power buttons is better and more responsive, like an external hardware buttons. It's lighter. Better design, looks a lot cooler and has customizable vent inserts. Don't care much about port plugs since I use my phone as GPS on a charger in a car and having micro-usb port cover is PITA. I feel Commuter inner rubber shell will get loose with time, already noticed pull around volume buttons where the rubber part was looser.
Honestly i was pulling towards the uag but i couldnt risk an wait for it to show up so just said buck it an got a commuter.. So far ive been realy happy with it. Size is good gives me a better grasp. A tad slippery but i got used to it now an got my way of holding it. Lip size around the edges is nice too realy would help incase phone fell screen down. Also comes with its own screen protector wich i botched the install since i suck at putting those on. An the biggest of all my conserns was the push buttons. On most of my cases on my old gs2 they were hard to push an this case there just rite.. not to soft nor to hard at all realy just perfect pressure to press. Better then my exs gs3 commuter wich is hard as shat to press the volume or power. I wouldnt put up with it if it was like that on mine.
I give it a 9/10. An only for the color choices aint the best style combinations that they coulda use but oh well not a deal breaker
sent from my Cricket Note 2
Loved my s3 commuter but the note 2 version is now in the trash. That thing was a terrible fit and gradually got worse. Had a replacement that was the exact same. UAG looks like the clear winner right now. I will buy once the crazy pricing goes down.
Sent from my SCH-I605 using xda app-developers app
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
I have to go with the commuter here. Some of the previous reviews have pointed out that the back is slippery. While I would agree, I also think that is not too slippery, and it is much easier to put in and take out of pockets than the UAG. Also, the biggest thing that I disliked about the UAG besides the lack of port covers, was that it just felt awkward in my hand. The commuter is much nicer to hold IMO. Also my UAG case was less than snug, it just felt like the phone wasn't secure. Also, the Commuter I think offers superior protection. Just check out this video. The Commuter, for all realistic purposes, does protects the phone just as much as the defender (which I also have). I think the commuter is the clear winner here.
Also, for what it's worth, Otterbox is the best mobile accessory company out there. Their customer service is quick & friendly. I have contacted them through both phone and email, and I have never received any service less than stellar, unlike my experience with UAG. I preordered my UAG case and was shocked at how little contact UAG had with me, as a preorder customer, especially considering how long the case was delayed.
My commuter also bent my charging port with its stiff port cover. Had to cut it off after my phone was replaced and then the left side of the phone began popping out. The Otter box hit the trash immediately.
Sent from my SCH-I605 using xda app-developers app
I loved my commuter when I first got it but now I hate it. The silicone is made out of cheap material, two weeks old and it's already tearing. The back is very slippery. I sometimes have trouble fitting my usb plug into the slot because the silicone gets in the way. Haven't had the usb bend yet as some have reported. The headphone jack on the commuter is not big enough for some of the plugs I use. I order the UAG case and it will be in tomorrow. I had the UAG on my S3 and I know what a terrific case it is. When my UAG comes in I'm throwing the commuter away.
I have had a commuter, a few other cases, and the UAG.
The Uag was my clear favorite. It is slim enough, but offer comparable protection to the commuter. The commuter was just too heavy and thick. The Uag is slimmer, and noticeably lighter.
I'd recommend Uag over the computer with out pause... Build, looks, and overall quality. But that is simply my opinion and nothing more.
I had seidio active... The magnet kickstand messed up the stylus.
I had a incipio dual pro shine. Great case that added protection, but not as much as the two you listed above. It so scratched so easy and looked like horrible in a week.
The Uag is my final case I believe. If your not sold on either, look into the trident aegis. I oersonslly don't like the way it looks, not even a little bit. But it is getting g great reviews by people here and the people who own it seem to prefer it. Maybe it looks better in person.
Sent from my SPH-L900 using Tapatalk 2
jbreeze228 said:
The silicone is made out of cheap material, two weeks old and it's already tearing.
Click to expand...
Click to collapse
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
AlphaNoble said:
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
Click to expand...
Click to collapse
Lmao. Nicely done sir.
Sent from my SGH-T889 using Tapatalk 2
Anyone know if UAG Allows wireless charging or does it affect it?
So I settled on the commuter case and have got to say I am pretty happy with it. Doesn't make the phone all that much bigger and having the port covers is a plus. Although we will see I'm pretty sure I will end up getting the UAG case as well so I can try them both out.
Sent from my SCH-I605 using Tapatalk 2
Literally just got my UAG case in and it was effing awesome! It's so easy to hold and grip versus the commuter I was scared would fall out of my hands because it was so slippery. The buttons are a lot easier to push. Love how you can change the vent colors but rockin the orange for now. The only area the Otterbox wins in is the size of the spen cut out. Other than that there is no comparison between these two. Don't see myself using any other case. Great job UAG.
Sent from my SGH-T889 using Tapatalk 2
chodie said:
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
Click to expand...
Click to collapse
Please let us know how it goes with the MIME glass screen protector.
I have both cases and must say UAG wins. Top it off with mime, excellent product with outstanding support
Sent from my GT-N7105 using xda premium
P
Sent from my HTC One using Tapatalk
UAG is very light and is easy to put on or take off. It has military standard drop. Heat vents keep your phone cool. Easy to hold. Looks good if you like the rugged look. Last a long time. I have a uag case from 4 years ago that still looks great today.
Sawdust in your port
Covered ports may seem unnecessary, but when I was working at radioshack, an old man came in and said his phone wasn't charging right. I assumed it was the cord (because that is the case 9 times out of 10), but the cable was perfectly fine. I then checked the USB port, and it looked like someone shoved white playdough in the port and shoved it down. As I pick it out, I discover it was sawdust that was left in there and shoved down over time. The phone worked fine after that.
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
I switch phones often, but one thing that remains constant is my Pitaka MagEZ cases. Have purchased well over 10 of them at this point. Wouldn't choose any other thin case
PseudoChris said:
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
Click to expand...
Click to collapse
Does the pitika have a lip to protect the screen? Thanks
magichoward said:
Does the pitika have a lip to protect the screen? Thanks
Click to expand...
Click to collapse
The "Air" series cases generally don't rise above the screen.
They do have a thicker "Pro" series option with a raised lip to protect the screen, bumpers on the corners, etc.
Samsung OEM silicon. Can confirm it has excellent grip
seoulbrova said:
Samsung OEM silicon. Can confirm it has excellent grip
Click to expand...
Click to collapse
The cloth one does as well since there's a slim silicone band along the edge.
zedwards said:
The cloth one does as well since there's a slim silicone band along the edge.
Click to expand...
Click to collapse
Yes I've seen the one the only concern I've read it's a little difficult to remove the spen.. Your thoughts.
I will never choose Pitaka again.
Edges are rough and the upper part could have covered more
But I especially won't because it damaged my Note 10+ because of a defect in the inside of the case that made a grain of sand sized hole in the back of my phone.
Been using the Zizo Bolt on my Note 10+ for over 6 months. Excellent grip, usability and protection.
Kick stand doubles as a grip; either fully retract/extend it to keep from losing it's pins, if not secured in either position they can work their way out in your pocket! No issues with this case otherwise.
The one for the 20 seems to come with a temper glass screen protector; that may not work so well.
That's not present on the one for the 10.
Presumably you can use it without and substitute one one your choice?
Damn the 20's cam has a big bullseye on it... no likey. Buying a good case for the 10+ was very hard early on, no doubt the 20 U will be harder to protect
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672
magichoward said:
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
Click to expand...
Click to collapse
https://www.amazon.com/JJNUSA-Handmade-Leather-Samsung-Galaxy/dp/B08DXWJSQ1?ref_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.
I received my complimentary case on Thursday the 17th. Here is my initial review of the Schnail Titan case for the note 20 ultra.
First things first. Here's the pros:
1. It's tough. The edges are tight & hug the phone nicely with no gaps. If you love Otterbox, Supcase, or rugged cases in general, you'll be satisfied with Schnail.
2. No camera bump. Lays nice and smooth.
3. Rubberized sides allow for extra grip with a nice diamond pattern.
4. A sturdy kickstand (Double-edged sword, more info below).
5. USB-C protective cover (I love covers)
6. Easy install (place in frame first, then place into the bottom. Also has the instructions on a sticker).
7. Works with Whitestone Dome SP.
8. Works with wireless charging.
9. Price.
All in all, it's a solid case. I just have a few nitpicks. Call me Petty Roosevelt But:
1. While I love the kickstand, it's hard to pull out and put back it. I still love it though.
2. Ultra petty, but some different colors would be great. I would love this in orange, or blue, or red.
3. It would be awesome if this had a cover for the spen, so it won't fly out when you drop it.
Other than that, I give this case a Major, Major, Major go :good: Will keep using as my daily and recommend.
Links:
https://www.amazon.com/Schnail-Screenless-Military-Protective-Kickstand/dp/B08CBNZGGR - Note 20 Ultra.
https://www.amazon.com/Schnail-Screenless-Military-Protective-Kickstand/dp/B08CBPNNJC - Note 20.
Photos:
Totally agree, here is my review that I left on Amazon:
‐---------
This case is an absolute beast. I have no worries about dropping the phone with this bad boy on. If you are looking for something that can take an absolute pounding, this is a great choice.
This case has a plastic rim that first fits around the phone, then slides into the outer shell. The fitment is perfect, the port holes all line up exactly. The charge port cover is a nice feature. Also, the phone lays flat which is a bit of a problem with this phone when using some other cases.
The sides are super grippy. I like how the design elements are all perfectly cut, no poor work here, you can tell the QA process is working well. The kickstand has a locking mechanism on it to ensure the phone doesn't fall when using it, but it's really hard to get back closed. It feels almost like you are going to break it at first, but its pretty robust so it has held up. Way better than a loose kickstand, but something to be aware of. There is a good sized lip at the top and bottom of the case as you can see in one of the pictures of the light gap between the screen and the table. This should help protect the screen in case of a drop on a flat surface.
The buttons work well, and there is a + and - sign on the volume buttons which is a nice touch.
Keep in mind as well that this a large case. It's meant for maximum protection, and achieves that well. No skinny jeans here...this needs a big ol pocket.
Final word: The designer clearly meant to create a case with maximum protection. They achieved this absolutely. The only way you can unintentionally break your phone in this case is if you drop the screen directly on a corner. The name Titan for this case is perfect. The case is huge and the kickstand is a little difficult to get out of lock. This is absolutely a five star product though.
‐--------------
I got mine too, while I love the case and definitely plan on using it daily over my phone, it's a shame that the kickstand is a pain to get out. The first time I had to use the other end of my fork to pop it out, it is that hard to pull out with your fingers!
K0wneD said:
I got mine too, while I love the case and definitely plan on using it daily over my phone, it's a shame that the kickstand is a pain to get out. The first time I had to use the other end of my fork to pop it out, it is that hard to pull out with your fingers!
Click to expand...
Click to collapse
Use it few times and it will loosen up. Great case..wish it came with a holster though
LT1UltraZ said:
Use it few times and it will loosen up. Great case..wish it came with a holster though
Click to expand...
Click to collapse
Does the company even make a holster case for their cases? That case is nice but won't fit in my car vent mounted phone holder due to the case being too wide. Any suggestions?
Sent from my SM-N986U1 using Tapatalk
3 demerits for the screen protector.
pieces of cake said:
3 demerits for the screen protector.
Click to expand...
Click to collapse
There is not a screen protector, its a face frame that essentially locks the case onto the phone.
racingmatt1 said:
Does the company even make a holster case for their cases? That case is nice but won't fit in my car vent mounted phone holder due to the case being too wide. Any suggestions?
Sent from my SM-N986U1 using Tapatalk
Click to expand...
Click to collapse
The Schnail case is awesome but if you need a case with the same durability and comes with a holster case look no further than the Unicorn Beetle Pro by Supcase.
JAMRZ69 said:
The Schnail case is awesome but if you need a case with the same durability and comes with a holster case look no further than the Unicorn Beetle Pro by Supcase.
Click to expand...
Click to collapse
Link? Is it bulky?
Sent from my SM-N986U1 using Tapatalk
racingmatt1 said:
Link? Is it bulky?
Sent from my SM-N986U1 using Tapatalk
Click to expand...
Click to collapse
https://www.supcase.com/products/galaxy-note20-ultra-unicorn-beetle-pro-rugged-holster-case-black
I don't think its bulky at all.
Saturny said:
I received my complimentary case on Thursday the 17th. Here is my initial review of the Schnail Titan case for the note 20 ultra.
First things first. Here's the pros:
1. It's tough. The edges are tight & hug the phone nicely with no gaps. If you love Otterbox, Supcase, or rugged cases in general, you'll be satisfied with Schnail.
2. No camera bump. Lays nice and smooth.
3. Rubberized sides allow for extra grip with a nice diamond pattern.
4. A sturdy kickstand (Double-edged sword, more info below).
5. USB-C protective cover (I love covers)
6. Easy install (place in frame first, then place into the bottom. Also has the instructions on a sticker).
7. Works with Whitestone Dome SP.
8. Works with wireless charging.
9. Price.
All in all, it's a solid case. I just have a few nitpicks. Call me Petty Roosevelt But:
1. While I love the kickstand, it's hard to pull out and put back it. I still love it though.
2. Ultra petty, but some different colors would be great. I would love this in orange, or blue, or red.
3. It would be awesome if this had a cover for the spen, so it won't fly out when you drop it.
Other than that, I give this case a Major, Major, Major go :good: Will keep using as my daily and recommend.
Links:
https://www.amazon.com/Schnail-Screenless-Military-Protective-Kickstand/dp/B08CBNZGGR - Note 20 Ultra.
https://www.amazon.com/Schnail-Screenless-Military-Protective-Kickstand/dp/B08CBPNNJC - Note 20.
Photos:
Click to expand...
Click to collapse
JLine05 said:
Totally agree, here is my review that I left on Amazon:
‐---------
This case is an absolute beast. I have no worries about dropping the phone with this bad boy on. If you are looking for something that can take an absolute pounding, this is a great choice.
This case has a plastic rim that first fits around the phone, then slides into the outer shell. The fitment is perfect, the port holes all line up exactly. The charge port cover is a nice feature. Also, the phone lays flat which is a bit of a problem with this phone when using some other cases.
The sides are super grippy. I like how the design elements are all perfectly cut, no poor work here, you can tell the QA process is working well. The kickstand has a locking mechanism on it to ensure the phone doesn't fall when using it, but it's really hard to get back closed. It feels almost like you are going to break it at first, but its pretty robust so it has held up. Way better than a loose kickstand, but something to be aware of. There is a good sized lip at the top and bottom of the case as you can see in one of the pictures of the light gap between the screen and the table. This should help protect the screen in case of a drop on a flat surface.
The buttons work well, and there is a + and - sign on the volume buttons which is a nice touch.
Keep in mind as well that this a large case. It's meant for maximum protection, and achieves that well. No skinny jeans here...this needs a big ol pocket.
Final word: The designer clearly meant to create a case with maximum protection. They achieved this absolutely. The only way you can unintentionally break your phone in this case is if you drop the screen directly on a corner. The name Titan for this case is perfect. The case is huge and the kickstand is a little difficult to get out of lock. This is absolutely a five star product though.
‐--------------
Click to expand...
Click to collapse
I will stand with both of these reviews. 100% awesome case. A holster would be awesome too
So much for your thin 20 Ultra.
#brick
I always go for the thinnest and lightest ;}
Just wanted to update the thread with my review. I honestly think this is a beast of a case without feeling like a brick.
This case is an extremely rugged case that doesn't make the Note20 feel like it weighs a ton like some other cases can. This is a standard two-part design. That being an exterior rugged rubber shell and in inner plastic shell that snaps around the phone to provide extra shock protection. I personally did not have any trouble pulling the two halves apart but I also have a lot of experience with these types of cases so your experience with that may vary.
Pros:
1. The external rubber case is solidly built. When you squeeze the case without the phone or inner plastic shell in it, it is *very* hard to squeeze from the side. This is due to a very hard plastic backplate that prevents the case from flexing.
2. The kick stand is a monster. It is a very wide kickstand and once it is fully extended and locked into place, it takes a bit of force to get it to collapse again. To me, this is a pro since I don't have to worry about the kickstand giving out and my phone falling.
3. Installation is very simple. Once you have the inner plastic shell snapped around your phone, slide the phone into the bottom of the case first and then push the top of the phone into the case. It should just pop right in.
4. Phone feels balanced when in this case. The Note20 is a bit top heavy because of the giant camera bump but the case does a nice job of trying to make the phone feel balanced in the hand.
5. The top and bottom of the case flair out ever so slightly to keep the screen off of your desk should you put your phone screen-side down.
6. The volume and power buttons extend ever so slightly from the case to give them a nice tactile feel without being obtrusive.
7. Excellent gripping on the sides of the case and a stylish honeycomb design on the inside that makes its way to the inside of the kickstand.
8. Port cutouts are precision molded. The charger protector port snugly fits inside the case to protect the charge port but it has a nice lip that is easy to pull down on to open it up.
9. The price. For what this case offers the price absolutely cannot be beat. This is a premium product for a budget friendly price.
*Note* I personally cannot comment on screen protector compatibility because I don't have one on. However, in phone case experience past, I'm sure it's fine.
All in all, from now on this company will be my go to choice for phone cases. Also, as an added bonus, a portion of their profits goes to the American Cancer Society.
Way too bulky. But it's a perfect way to ruin the beauty of this phone's design!