Hey guys!
I'm having problems with custom roms like mahdi rom vanir aosp recaf and ubberlaggydarwins 4.4 rom after about 30 min of use my phone says i removed the SIM card! Wth??? This does not happen on fxp, exlistenz rom and stock rom
Can someone help me?
Sent from my C5303 using xda app-developers app
Related
hi friends am on stock 2.254 rom and facing a wifi issue.. i want to know does installing custom rom will solve my this problem.. as we knw its a software glitch from SONY .. do reply
No....as most custom ROMs available at the most are basedbon stock.
Wait until cm is available
Sent from my C5303 using xda premium
Hi guys,
My girlfriend just got the S3 Mini (GT-8190N) and she wants it to be rooted and also a bit more slim i.e. without the bloatware.
However I can't seem to find that many ROMS for the phone - is it because it's fairly new (being with NFC)?
If you know of any good rooms - please let me know.
Thanks
Jonas
You can install any rom but your NFC wont work.
Sent from my GT-I8190 using XDA Premium 4 mobile app
Dmod V6. Its for all versions
Gesendet von meinem GT-I8190
Cyanogenmod 10.2 from Maclaw, android 4.3.1, fast, stable and bloatware free. Only Nfc not working.
Dmod v6 will be fine
Sent from my GT-I8190 using xda app-developers app
DeHuMaNiZeD said:
You can install any rom but your NFC wont work.
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In other words, it will perfectly safe to install a normal 8190 rom on a 8190N phone with only NFC not working?
Thank for all of your replies guys.
only your nfc wont be working. i have same phone as you and using maclaw cm10.2.
You can root the device and remove the bloatware with titanium backup.
Hey. which rom is better Cyanogenmod 10.2 from Maclaw, android 4.3.1 or Maclaw 4.2.2 ?
Hello. I have an optimus 4x rooted with unlocked bootloader, and right now I use enox rom. My problem is that i have installed most custom roms on xda, and since 3 months, I am experiencing some problems with calls. My signal is full, hspa, but just whenever my phone wants it just hang up. I was on omni 4.4.2 for a month now, and it has just happened 2 times, but today that I am back at an older rom (it was happening on every custom rom before) it started again and till now, we are talking for more than 20 times...
Sent from my LG-P880 using Tapatalk
emplokeas said:
Hello. I have an optimus 4x rooted with unlocked bootloader, and right now I use enox rom. My problem is that i have installed most custom roms on xda, and since 3 months, I am experiencing some problems with calls. My signal is full, hspa, but just whenever my phone wants it just hang up. I was on omni 4.4.2 for a month now, and it has just happened 2 times, but today that I am back at an older rom (it was happening on every custom rom before) it started again and till now, we are talking for more than 20 times...
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=2496075
[TUT] Implementing EPRJ RIL in Custom Roms by Yourself
Sent from my LG-P880 - Beanstalk 4.4.2 - Iodak 9.95 kernel - using XDA Premium 4 mobile app
peppethustra said:
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=2496075
[TUT] Implementing EPRJ RIL in Custom Roms by Yourself
Sent from my LG-P880 - Beanstalk 4.4.2 - Iodak 9.95 kernel - using XDA Premium 4 mobile app
Click to expand...
Click to collapse
it shouldn't be happening on enox though
Flying_Bear said:
it shouldn't be happening on enox though
Click to expand...
Click to collapse
Not normally, cause Enox is stock based, you are right..but who knows, maybe after flashing a couple of roms, system became crazy about baseband, so I thought suggesting him to try your workaround could be a good idea..the only other way to try to solve the problem could be wiping everything, and make a clean install, or restoring stock with kdz tool..but maybe epj RIL can do the trick, considering the crazy flashing which has been reported on the first post.. It should be fine, if working, cause there will be no necessity to make factory reset
Sent from my LG-P880 - Beanstalk 4.4.2 - Iodak 9.95 kernel - using XDA Premium 4 mobile app
Wassup guys just wanted to know if there were or are any custom kernels for my HTC one running a cm11 nightly . I have the Sprint version . please provide links if u have any info . thanks !!!
Sent from my One using xda app-developers app
ichristianp16 said:
Wassup guys just wanted to know if there were or are any custom kernels for my HTC one running a cm11 nightly . I have the Sprint version . please provide links if u have any info . thanks !!!
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
I dont have the link on hand but there's Lunar kernel for asop ROMs. Google it and u will find it. Let me just say though that I recently flashed Lunar asop kernel on slimkat and flashed Lunar GPE kernel on Grusomes ROM and both times I lost signal and everything and had to reflash the latest firmware to get everything back.
Thanx a lot !!!! That signal issue u had I not I e that is happening with a lot of the nightlys so I dont think it's the kernel . I switched back to viper one Rom until there's a stable updated cm11 Rom that I can daily drive
Sent from my HTCONE using xda app-developers app
Hi my friend has a problem with his S3 mini his first custom rom flash was cyangenomod 11.0 4.4.2 he had no problems apart from battery drain, he has flashed a few other kit Kat Roms had no problems, just a bit rubbish so he flashed carbon 4.4.2 and his 3g did not work ever since, no kit Kat Roms work with 3g any more since carbon, he is currently using pacrom 4.3.1 with no problems, but he would like to use carbon 4.4.2 as this rom has particular features which are better than other roms. Is there away to fix this? He ask on Maclaw (novafusion) but no reply.
Sent from my Arc using xda app-developers app
most of people dont experience this. i have novafusion cm11.
make sure flashed with twrp 2.7
make sure he have latest baseband.
and send a email to [email protected]
dont know if did.
but im sure i read about something manual apn settings. someone must know here. gl
Sent from my GT-I8190 using XDA Premium 4 mobile app
powerwill said:
Hi my friend has a problem with his S3 mini his first custom rom flash was cyangenomod 11.0 4.4.2 he had no problems apart from battery drain, he has flashed a few other kit Kat Roms had no problems, just a bit rubbish so he flashed carbon 4.4.2 and his 3g did not work ever since, no kit Kat Roms work with 3g any more since carbon, he is currently using pacrom 4.3.1 with no problems, but he would like to use carbon 4.4.2 as this rom has particular features which are better than other roms. Is there away to fix this? He ask on Maclaw (novafusion) but no reply.
Sent from my Arc using xda app-developers app
Click to expand...
Click to collapse
make sure to wipe correctly, maybe try a full wipe and clear dalvic afterwards
factorexh said:
most of people dont experience this. i have novafusion cm11.
make sure flashed with twrp 2.7
make sure he have latest baseband.
and send a email to [email protected]
dont know if did.
but im sure i read about something manual apn settings. someone must know here. gl
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Right I've got him to flash the latest baseband but still no luck the preferred network has changed from 4g to 3g so it has done something, I got him to email novafusion, but he said that he's had no reply, stock rom works with 3g, but 3g does not work at all with kitkat roms
Sent from my Arc using xda app-developers app