Please help, I have a big problem!
I accidently flashed a rom that required S-off but my device is S-on and now it keeps rebooting. After that I tried to install Stock Sense(fflashable .zip) but when it almost completed, it failed. Now if I reboot it it doesn't go further than the HTC logo screen. I did some research to flash the stock sense on it but I don't know which RUU I have to flash. My the device is the international version unlocked (m7ul). My radio is radio-4a.17.3250.14
my getvar:
bootloader version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-clpd: None
version-microp: None
version-main:
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_E11
battery-status: good
battery-voltage: 3914 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
commitno-bootloader: dirty-d959c75800
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. Total time 0.048s
Please help me
Thanks
LMH1998 said:
Please help, I have a big problem!
I accidently flashed a rom that required S-off but my device is S-on and now it keeps rebooting. After that I tried to install Stock Sense(fflashable .zip) but when it almost completed, it failed. Now if I reboot it it doesn't go further than the HTC logo screen. I did some research to flash the stock sense on it but I don't know which RUU I have to flash. My the device is the international version unlocked (m7ul). My radio is radio-4a.17.3250.14
my getvar:
bootloader version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-clpd: None
version-microp: None
version-main:
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_E11
battery-status: good
battery-voltage: 3914 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
commitno-bootloader: dirty-d959c75800
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. Total time 0.048s
Please help me
Thanks
Click to expand...
Click to collapse
read this thread to look for your stock ROM: here and flash it
then if you want S-OFF then follow this detailed guide: here
kamilmirza said:
read this thread to look for your stock ROM: here and flash it
if you want S-OFF then follow this detailed guide: here
Click to expand...
Click to collapse
I don't get any devica-main code so I really don't know which one to download, but I've downloaded one, but when I try to flash it, It always fails at: (boatloader) checking signature.
LMH1998 said:
I don't get any devica-main code so I really don't know which one to download, but I've downloaded one, but when I try to flash it, It always fails at: (boatloader) checking signature.
Click to expand...
Click to collapse
this is because you the tried to flash something (ROM or any other package) with S-ON
you have to flash it with custom recovery, CWM or TWRP
which one you selected?
kamilmirza said:
this is because you the tried to flash something (ROM or any other package) with S-ON
you have to flash it with custom recovery, CWM or TWRP
which one you selected?
Click to expand...
Click to collapse
So I'll tell you my story.
First it was on sense, then I installed OneDroid using TWRP v2.6.3.3, It worked perfectly fine but battery drain was to bad so I decided to return to Sense, so I flashed a flashable .zip. Eveyrthing worked ok. Then I heard that AOKP had better battery life so I downloaded it, but it didn't want to install, It kept saying ERROR. Then I've thought of flashing the Google Play Edition. So here everything went wrong. it tried to flash with TWRP but It got failed aswell. then I flashed CWM on it, installed the Google Play Edition rom and rebooted my phone, after 3 seconds it reboots, and it keeps on rebooting. but eventually I got back into Recovery and flashed the Sense rom that I still had on my phone. But when I was installing that, It got failed. Then I tried to flash TWRP to install the Sense rom, but after I flashed TWRP, I couldn't go back into recovery. Then the phone get stuck on the HTC logo screen.
So now I want to flash Sense with RUU but I don't know which one to install and it fails when I flash the .zip with cmd. It fails at "checking signature".
PLEASE PEOPLE HELP ME, it's my brother phone's and I messed up
LMH1998 said:
So I'll tell you my story.
First it was on sense, then I installed OneDroid using TWRP v2.6.3.3, It worked perfectly fine but battery drain was to bad so I decided to return to Sense, so I flashed a flashable .zip. Eveyrthing worked ok. Then I heard that AOKP had better battery life so I downloaded it, but it didn't want to install, It kept saying ERROR. Then I've thought of flashing the Google Play Edition. So here everything went wrong. it tried to flash with TWRP but It got failed aswell. then I flashed CWM on it, installed the Google Play Edition rom and rebooted my phone, after 3 seconds it reboots, and it keeps on rebooting. but eventually I got back into Recovery and flashed the Sense rom that I still had on my phone. But when I was installing that, It got failed. Then I tried to flash TWRP to install the Sense rom, but after I flashed TWRP, I couldn't go back into recovery. Then the phone get stuck on the HTC logo screen.
So now I want to flash Sense with RUU but I don't know which one to install and it fails when I flash the .zip with cmd. It fails at "checking signature".
PLEASE PEOPLE HELP ME, it's my brother phone's and I messed up
Click to expand...
Click to collapse
are you on TWRP?
if so when you select the ROM to flash, uncheck the verification md5 something
kamilmirza said:
are you on TWRP?
if so when you select the ROM to flash, uncheck the verification md5 something
Click to expand...
Click to collapse
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
LMH1998 said:
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
Click to expand...
Click to collapse
tell me your CID, can you remember your main?
flash TWRP via fastboot method (bootloader)
kamilmirza said:
tell me your CID, can you remember your main?
flash TWRP via fastboot method (bootloader)
Click to expand...
Click to collapse
Sorry but I'm super noob in HTC ONE devolpment, I'm more into Xperia devolping but where can I find the CID?
I really can't remember the main.
but the device is bought in Belgium, Europe. Maybe that can help you to find it.
LMH1998 said:
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
Click to expand...
Click to collapse
i understand you are anxious, but please calm down, before you end up with a brick; (and please don't cross-post, it just get's everybody confused)
I'll be back in a little while, but in the meantime can you confirm,
1- you have bootloader unlocked
2- what OS are you running (Win7 / 8 / 8.1, Ubuntu, Mac)
3- do not type the output of "fastboot getvar all", use copy/paste
nkk71 said:
i understand you are anxious, but please calm down, before you end up with a brick; (and please don't cross-post, it just get's everybody confused)
I'll be back in a little while, but in the meantime can you confirm,
1- you have bootloader unlocked
2- what OS are you running (Win7 / 8 / 8.1, Ubuntu, Mac)
3- do not type the output of "fastboot getvar all", use copy/paste
Click to expand...
Click to collapse
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
LMH1998 said:
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
Click to expand...
Click to collapse
remove your SERIALNO and IMEI from your post
be patient and good luck :good:
@nkk71 will guide you through and now you are in good hands
kamilmirza said:
remove your SERIALNO and IMEI from your post
be patient and good luck :good:
@nkk71 will guide you through and now you are in good hands
Click to expand...
Click to collapse
i hope you're right.
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
LMH1998 said:
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
finished. total time: 0.046s
Click to expand...
Click to collapse
so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...
[/QUOTE]so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...[/QUOTE]
I unlocked my bootloader again
nkk71 said:
i hope you're right.
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...
Click to expand...
Click to collapse
I unlocked my boatloader again
LMH1998 said:
I unlocked my boatloader again
Click to expand...
Click to collapse
:good::good:
do you have a functioning ROM? you'll need to use rumrunner to get s-off
i believe you need a rooted ROM, preferably with unsecured kernel.
what recovery are you on, and what ROM?
nkk71 said:
:good::good:
do you have a functioning ROM? you'll need to use rumrunner to get s-off
i believe you need a rooted ROM, preferably with unsecured kernel.
what recovery are you on, and what ROM?
Click to expand...
Click to collapse
Tha problem is that I don't have any ROM on it now, but I do have a ROM on the memory of the phone(Sense rom) and I'm using TWRP v2.6.3.3 but I can't go into recovery Don't know why...
Nevermind I can get back into recovery but everything got erased
LMH1998 said:
Tha problem is that I don't have any ROM on it now, but I do have a ROM on the memory of the phone(Sense rom) and I'm using TWRP v2.6.3.3 but I can't go into recovery Don't know why...
Nevermind I can get back into recovery but everything got erased
Click to expand...
Click to collapse
i need to go for about an hour (+ or -), can you check your PM....
nkk71 said:
i need to go for about an hour (+ or -), can you check your PM....
Click to expand...
Click to collapse
Yeah ok I can do that.
and btw my CID is HTC__E11
LMH1998 said:
Yeah ok I can do that.
and btw my CID is HTC__E11
Click to expand...
Click to collapse
Sorry didn't come back yesterday, but I'll be online a bit later...
In the meantime, flash the ROM I sent you, and use http://rumrunner.us/ to get s-off
to get the rom to your phone, go to custom recovery (CWM or TWRP), then use one of the following methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip
example of adb push:
Code:
C:\ADB2>[B]adb push Guru_Reset_M7_3.62.401.1.zip /data/media/0/[/B]
2922 KB/s (1102709591 bytes in 368.450s)
note that adb push will not show any kind of progress until it completes (about 5 to 10 minutes).
and finally choose "install" in CWM or TWRP and install it.
then use rumrunner; remember reading the rumrunner instruction (especially the firewall/antivirus etc).
Related
I've flashed multiple ROMS but I don't know what what's up now.
I was stuck on FTS Rom and couldn't flash any other ROMS- they wouldn't take. It would always reboot in FTS.
So in TWRP, I did an advanced wipe... everything was gone including the multiple various ROMS and backups in both TWRP and CLKmod. Trouble is, now I can get as far as flashing various new recoveries from the bootloader, but I can't push any rom to it or flash anything from the bootloader.
Extra kicker- I can NOT mount the phone on my computer. This has been the case for a while, not from any ROM. Not from FTS Rom, not from any recovery... can not mount the phone and transfer files.
HTC Dumlock also did not work.
Specs-
HTC One- unlocked, rooted, HBoot 1.55, S-On, Radio 4%.20.3218.13
Any help would be appreciated.
I did s-off since you're unlocked. Probably the issue. Then I would go into fast boot to either ruu or transfer a rom
I think rumrunner is what works on 1.55 hboot
Sent from my HTC One
krankenator said:
I've flashed multiple ROMS but I don't know what what's up now.
I was stuck on FTS Rom and couldn't flash any other ROMS- they wouldn't take. It would always reboot in FTS.
So in TWRP, I did an advanced wipe... everything was gone including the multiple various ROMS and backups in both TWRP and CLKmod. Trouble is, now I can get as far as flashing various new recoveries from the bootloader, but I can't push any rom to it or flash anything from the bootloader.
Extra kicker- I can NOT mount the phone on my computer. This has been the case for a while, not from any ROM. Not from FTS Rom, not from any recovery... can not mount the phone and transfer files.
HTC Dumlock also did not work.
Specs-
HTC One- unlocked, rooted, HBoot 1.55, S-On, Radio 4%.20.3218.13
Any help would be appreciated.
Click to expand...
Click to collapse
do you know how to use fastboot commands?
post your results from (minus your iemi and serial no)
fastboot getvar all
we can use this info to direct you to the correct RUU to fix your phone
clsA said:
do you know how to use fastboot commands?
post your results from (minus your iemi and serial no)
fastboot getvar all
we can use this info to direct you to the correct RUU to fix your phone
Click to expand...
Click to collapse
Not pro, but I hobble by. Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4350mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
krankenator said:
Not pro, but I hobble by. Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4350mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Edit your post to match mine.
you have AT&T phone here's the link to the RUU
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Edit: Keep in mind that resetting your phone with RUU is full wipe and starting from scratch
after it's done you will need to unlock bootloader, flash recovery and Root. Same as if your phone was brand new
clsA said:
Edit your post to match mine.
you have AT&T phone here's the link to the RUU
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Edit: Keep in mind that resetting your phone with RUU is full wipe and starting from scratch
after it's done you will need to unlock bootloader, flash recovery and Root. Same as if your phone was brand new
Click to expand...
Click to collapse
Thanks. I don't suppose there is a Mac version for this? I don't currently have Windows installed. If not, I"ll just have to fix this later.
Thanks for all your help.
krankenator said:
Thanks. I don't suppose there is a Mac version for this? I don't currently have Windows installed. If not, I"ll just have to fix this later.
Thanks for all your help.
Click to expand...
Click to collapse
yes here
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb43_sense50_mr_cingular_us_3-17-502-3-decrypted-zip/
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
Click to expand...
Click to collapse
files needed >> http://forum.xda-developers.com/showthread.php?t=2390995
clsA said:
yes here
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb43_sense50_mr_cingular_us_3-17-502-3-decrypted-zip/
files needed >> http://forum.xda-developers.com/showthread.php?t=2390995
Click to expand...
Click to collapse
Thanks for your help. Downloading the RUU now but before I flash this I just want to be clear.
Do I first need to S-Off using Rumrunner? I can't find a mac version, just Linux and Win.
Then do I need to re-lock my bootloader? (I read that step here http://forum.xda-developers.com/showthread.php?t=2251800)
Then at that point I can flash the RUU or can I just flash the RUU without S-Off or re-locking the bootloader
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
krankenator said:
Thanks for your help. Downloading the RUU now but before I flash this I just want to be clear.
Do I first need to S-Off using Rumrunner? I can't find a mac version, just Linux and Win.
Then do I need to re-lock my bootloader? (I read that step here http://forum.xda-developers.com/showthread.php?t=2251800)
Then at that point I can flash the RUU or can I just flash the RUU without S-Off or re-locking the bootloader
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
Click to expand...
Click to collapse
I don't think that file requires s-off
but yes a locked boot loader is needed
fastboot oem lock
Well, time to try something else.
Any ideas anyone?
krankenator said:
Something didn't work. It only reboot to the bootloader.
Pro-Mac-Jesseesktop jesse$ ./fastboot oem lock
Click to expand...
Click to collapse
FAILED (remote: 12 signature verify fail)
I'll take a guess this means you need s-off
or a windows PC to run the RUU.exe I posted first
Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
arbank94 said:
Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
Click to expand...
Click to collapse
You can't apply ota with a custom recovery, you need your stock recovery.
arbank94 said:
Hello, I have a rooted international HTC One currently running 4.3 Android with Sense 5.0. I am trying to perform an OTA system update that I have received... I downloaded the new 4.4 Android (1.1 GB) and I have selected "Install Update". But when the phone restarts, it just enters recovery and opens TWRP by itself!
So then I try to flash the downloaded OTA file via TWRP, but that also fails... Does anyone know how I can get 4.4 on my HTC One? Thank you
Click to expand...
Click to collapse
Depending on whats been done to the phone you can eather flash stock recovery and try the update from their or you have to ruu back to stock and take the update that way.
fastboot getvar all will tell you what stock recovery you need or what ruu to use
alray said:
You can't apply ota with a custom recovery, you need your stock recovery.
Click to expand...
Click to collapse
So would you recommend getting stock recovery following nkk71's guide in your signature, or should I just flash a 4.4 rom?
arbank94 said:
So would you recommend getting stock recovery following nkk71's guide in your signature, or should I just flash a 4.4 rom?
Click to expand...
Click to collapse
Do what cIsA said. Check the output of "fastboot getvar all". Look at your main-ver # and find the corresponding stock recovery. There is a thread in general section with a collection of stock recovery.
You can post the output of getvar here minus imei/sn and we will link you the correct recovery.
Okay so I ran a fastboot getvar all, and apparently there is no RUU for my device, because it is Latin American with a CID of HTC_332. (I searched almost everywhere)
Now, after flashing a 4.4 rom I downloaded, my HTC device wasn't turning on anymore (it was getting stuck at the HTC boot logo). So I restored from a backup I made in TWRP, and that didn't work either. So now my problem just got 1000x worse because of a mistake I just made now of completely wiping my device and the OS.
So for the moment I'll try to flash a new boot.img, get S-OFF again, and change the CID to 11111111 (as I have read) where I will then download a RUU I can use. I'll let you know what happens.
Whoa there.. No need to flash boot.IMG.
What's you're steps? I think you are about to make it worse
sent from my mobile device
Okay well I'm in a tight situation atm.
My phone is completely wiped, with no OS or anything. The only thing I have access to is fastboot, and the TWRP bootloader. Also considering my phone is wiped, I believe I have S-ON as well.
So what is the first step to just get a boot going? (unless I'm not completely screwed that is..)
EDIT- I have successfully flashed Android Revolution to my phone from TWRP by pushing the zip via adb fastboot. Got my phone running again. Step 1 complete.
Step 2 now is to get S-OFF again...
Step 3- Change my CID to 11111111 using the SuperCID method (there is no RUU for my Latin American CID; HTC_332)
Step 4- Use an appropriate RUU to get 4.4 stock after I have changed my CID.
Before I continue with these steps, can anyone confirm with me if I am on the right path?
Step 2 - Confirmed.
Step 3 & Step 4 ... What is an appropriate RUU? You have not yet posted a fastboot getvar all output yet. (remove imei)
SaHiLzZ said:
Step 2 - Confirmed.
Step 3 & Step 4 ... What is an appropriate RUU? You have not yet posted a fastboot getvar all output yet. (remove imei)
Click to expand...
Click to collapse
I had the same cid when I bought mine. Irc, MID was PN0711000 with s.w. X.XX.599.X.
so he could use the 1.29.401.2 ruu on htc1guru but he have to change cid.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
arbank94 said:
EDIT- I have successfully flashed Android Revolution to my phone from TWRP by pushing the zip via adb fastboot. Got my phone running again.
Before I continue with these steps, can anyone confirm with me if I am on the right path?
Click to expand...
Click to collapse
You could just stay with arhd, its a very good rom...
alray said:
You could just stay with arhd, its a very good rom...
Click to expand...
Click to collapse
Agreed!:laugh:
alray said:
I had the same cid when I bought mine. Irc, MID was PN0711000 with s.w. X.XX.599.X.
so he could use the 1.29.401.2 ruu on htc1guru but he have to change cid.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
You could just stay with arhd, its a very good rom...
Click to expand...
Click to collapse
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>adb push htcrom2.zip /sdcard/
3455 KB/s (1180577030 bytes in 333.659s)
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH392W901414
(bootloader) imei: **************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
So yeah... there's no RUU as I said.
alray, in order to use that 1.29.401.2 RUU, what do I have to change my CID to?
EDIT: I'll just stick with your suggestion alray and stay with ARHD lol. (but in case I change my mind, what CID should I change to for that RUU?... so that I won't have to bump this thread or make a new one later)
arbank94 said:
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>adb push htcrom2.zip /sdcard/
3455 KB/s (1180577030 bytes in 333.659s)
C:\Users\Arban\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x
86_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH392W901414
(bootloader) imei: **************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
So yeah... there's no RUU as I said.
alray, in order to use that 1.29.401.2 RUU, what do I have to change my CID to?
EDIT: I'll just stick with your suggestion alray and stay with ARHD lol. (but in case I change my mind, what CID should I change to for that RUU?... so that I won't have to bump this thread or make a new one later)
Click to expand...
Click to collapse
These CID:
HTC__001
HTC__J15
HTC__A48
HTC__M27
are compatible with the 1.29.401.2 ruu.zip so i'll suggest you to use HTC__001 if you change your mind. Personally, I would stay on ARHD. No benefit to flash that RUU vs ARHD. ARHD is always up to date...
Help please?? I am trying to RUU my HTC One. I successfully relocked my bootloader.
However, when I start the process, it fails (unknown error). I am told that I need to use the "correct" RUU and try again. My problem is that the one I am using claims to be correct. Sprint_HTD_One_m7wls_1.29651.10_RUU.zip
I have noticed that when I am going through the RUU process I am shown the screen that asks to compare the current version with the new one. The current image version is blank. Nothing there. No current image version at all.
slaldrich said:
Help please?? I am trying to RUU my HTC One. I successfully relocked my bootloader.
However, when I start the process, it fails (unknown error). I am told that I need to use the "correct" RUU and try again. My problem is that the one I am using claims to be correct. Sprint_HTD_One_m7wls_1.29651.10_RUU.zip
I have noticed that when I am going through the RUU process I am shown the screen that asks to compare the current version with the new one. The current image version is blank. Nothing there. No current image version at all.
Click to expand...
Click to collapse
post the output of ''fastboot getvar all'' except imei and sn
alray said:
post the output of ''fastboot getvar all'' except imei and sn
Click to expand...
Click to collapse
Here it is:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: N/A
version-cpld: none
version-microp:none
version- main:
version -misc: PVT SHIP S-ON
serialno: (you asked this not be included) but it is present
meid: number present, not included
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery status: good
battery voltage: 4280mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate 11
gencheckpt: 0
I also notice that on the fastboot screen, it reads:
**TAMPERED**
**RELOCKED**
**SECURITY WARNING**
m7_WLS PVT SHIP S-ON RH
HBOOT- 1.56.0000
OpenDSP- v32. 120.274.0909
OS- (blank)
eMMC-boot 2048 MB
Jan.23 2014, 22:11:35.0
thanks for looking at this!
slaldrich said:
Here it is:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: N/A
version-cpld: none
version-microp:none
version- main:
version -misc: PVT SHIP S-ON
serialno: (you asked this not be included) but it is present
meid: number present, not included
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery status: good
battery voltage: 4280mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate 11
gencheckpt: 0
thanks for looking at this!
Click to expand...
Click to collapse
The RUU you are trying to flash is a downgrade, thats why you can't flash it. 1.29.651.10 is for hboot 1.44 and you are on 1.56. You need s-off to downgrade with a ruu.
Refer to the sprint htc one forum to see if this is possible to s-off your phone on hboot 1.56 and then downgrade using the ruu
or
flash a rom for sprint htc one.
alray said:
The RUU you are trying to flash is a downgrade, thats why you can't flash it. 1.29.651.10 is for hboot 1.44 and you are on 1.56. You need s-off to downgrade with a ruu.
Refer to the sprint htc one forum to see if this is possible to s-off your phone on hboot 1.56 and then downgrade using the ruu
or
flash a rom for sprint htc one.
Click to expand...
Click to collapse
I understand s-off isn't possible. can you give me direction for getting started with your second suggestion "flash a rom for sprint htc one"?
slaldrich said:
I understand s-off isn't possible. can you give me direction for getting started with your second suggestion "flash a rom for sprint htc one"?
Click to expand...
Click to collapse
first your bootloader is relocked, you'll need to unlock it.
flash twrp recovery for M7WLS (sprint variant)
then download a sprint compatible rom. You can find them here .
push it to your phone and flash it.
If you have questions about how to do any of these steps ask me here, we'll go step by step...
alray said:
first your bootloader is relocked, you'll need to unlock it.
flash twrp recovery for M7WLS (sprint variant)
then download a sprint compatible rom. You can find them here .
push it to your phone and flash it.
If you have questions about how to do any of these steps ask me here, we'll go step by step...
Click to expand...
Click to collapse
My basic problem is that my radios were not connecting with Sprint at all. So, I understand that I need to do a RUU to fix that. Flashing a custom rom won't fix that (?). Now, I am unlocked with S-on. I have TWRP available. When I reboot, I am taken to the HTC lock screen, but if I unlock it, I get a white HTC screen that lets me do nothing.
I just want to get it back to what I had when I took it out of the box. If you can walk me though this, I would appreciate it. I am NH if we can do this vocally.
slaldrich said:
I just want to get it back to what I had when I took it out of the box. If you can walk me though this, I would appreciate it. I am NH if we can do this vocally.
Click to expand...
Click to collapse
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
http://www.htc1guru.com/dld/guru_reset_m7_sprint_3-04-651-2-zip/
alray said:
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
Is it possible to get my s-off again? If so, how might I do that?
Click to expand...
Click to collapse
slaldrich said:
alray said:
With s-on, its not possible to use the available ruu. You could use the latest guru reset rom available for your phone. Select the option to wipe, install stock recovery and stock radio.
Is it possible to get my s-off again? If so, how might I do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2633276
Click to expand...
Click to collapse
alray said:
slaldrich said:
okay, I got s-off. now, how do I downgrade hboot?
or
where do I go from here?
and... I really appreciate this!!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
slaldrich said:
alray said:
slaldrich said:
okay, I got s-off. now, how do I downgrade hboot?
or
where do I go from here?
and... I really appreciate this!!
Click to expand...
Click to collapse
download this ruu.zip http://www.htc1guru.com/dld/ruu-zip-m7_wls_jb_50_sprint_1-29-651-10_ruu_decrypted-zip/
save it in the same folder where adb and fastboot are
reboot your phone in bootloader mode, select fasboot, plug your usb cable.
open your command prompt from fastboot/adb folder
type:
Code:
fastboot oem rebootRUU
(make sure you use capital letter for RUU)
your phone will reboot in ruu mode, a black screen with a silver HTC logo
then type:
Code:
fastboot flash zip <name_of_ruu_you_have_downloaded>.zip (without < and >)
wait for the ruu to flash. It will probably output something like: failed, flush image again so do the same command again
Code:
fastboot flash zip <name_of_ruu_you_have_downloaded>.zip (without < and >)
then
Code:
fastboot reboot
your phone should boot to your stock rom.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
the download link from htcguru is broken... no download available there
Is there anything else I can use? a different link, perhaps?
slaldrich said:
the download link from htcguru is broken... no download available there
Is there anything else I can use? a different link, perhaps?
Click to expand...
Click to collapse
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
The download has begun working but all my attempts truncate/stop at around 20MB... Nowhere near 1gb. I will keep trying -- because right now I have an HTC One with working Cyanogenmod... but no connectivity at all with Sprint.
Do you happen to have a copy you can throw in dropbox for me?
And... this is the first time I've ever used these forums, so, I am still learning what I am doing. Thanks for your patience
I did download a rom called
Sprint_HTC_One_3.04.651.2_Stock_Rooted_Odexed.zip
If I flash this, will it fix my radios or will it just put me deeper in the hole?
I am on my 10th try for the htc1guru ... but none has made it past 40mb
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
I finally was able to download the entire file. Then, I carefully followed instructions as you sent...
At last step, I received a "failed 32 header error"
so, I repeated the flashboot flash zip command again. same error
repeated a third time. same error
did fastboot reboot and.... nothing still at cyanogenmod with no connectivity. It didn't take.
It went as planned up until the Failed message.
Please tell me you have another idea or a way to deal with this.
alray said:
Don't forget to quote me for faster answer
I have just tested the link and it work fine for me, the download speed isn't great atm but you'll be able to get the file in maybe 1 hour (200-300 Kb/sec)
Click to expand...
Click to collapse
I did finally get the entire file... and did everything you suggested. Unfortunately, I got a Failed remote "32 header error"
I repeated the whole procedure a second time. Still nothing. I checked the MD5 of the file and it apparently was corrupt.
SO... I was back to Cyanogenmod 11 with no Sprint. As a last ditch try before retiring to bed, I came upon a zip file that said it had Sprint radio files. I figured, heck, what have I got to lose? So, I flashed the small zip. and POOF... works! My phone is back AND I didn't have to go back to stock.
I do want to say THANK YOU for all your help. Knowing you were there to help me along encouraged me not to throw my phone under a passing truck. I am sure that once we got that dang file downloaded correctly, it would have worked.
Even though it didn't turn out as we started.... your help was immeasurable for me. Thanks again.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34NS902058
(bootloader) imei: 99-------------------1
(bootloader) meid: 99-----------------
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3885mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
after flash custom rom imei & baseband gone plezzzzzz help n i can not flash any RUU or official rom
smrussel said:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34NS902058
(bootloader) imei: 99-------------------1
(bootloader) meid: 99-----------------
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3885mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
after flash custom rom imei & baseband gone plezzzzzz help n i can not flash any RUU or official rom
Click to expand...
Click to collapse
Did you flashed a sprint compatible custom rom? You can't flash custom roms for the M7_UL on your m7_wls, both phones haves different partitions layout. Reflash a sprint custom Ron using a sprint compatible custom recovery or flash the latest sprint ruu from htc website (Google search: htc support rom download).
Sent from my HTC One using XDA Labs
alray said:
Did you flashed a sprint compatible custom rom? You can't flash custom roms for the M7_UL on your m7_wls, both phones haves different partitions layout. Reflash a sprint custom Ron using a sprint compatible custom recovery or flash the latest sprint ruu from htc website (Google search: htc support rom download).
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
i tried to flash with sprint Ruu but flash could not complete due to an error
Hello, I have an HTC One M7 and I'm trying to install the custom ROM Hd revolution. To do this I follow this guide : http://forum.xda-developers.com/showthread.php?t=2265618 . I've already unlock the bootloader and now I'm trying to "Flashing custom recovery" everything is ok till the stage 8, on my terminal they write the good message "OKAY" however my phone is block the white screen with fastboot and I don't have access to do a nandroid backup. Do you have an idea why? thank you very much
ti_coco said:
Hello, I have an HTC One M7 and I'm trying to install the custom ROM Hd revolution. To do this I follow this guide : http://forum.xda-developers.com/showthread.php?t=2265618 . I've already unlock the bootloader and now I'm trying to "Flashing custom recovery" everything is ok till the stage 8, on my terminal they write the good message "OKAY" however my phone is block the white screen with fastboot and I don't have access to do a nandroid backup. Do you have an idea why? thank you very much
Click to expand...
Click to collapse
Can you post a fastboot getvar all, removing the serial number and imei please?
Also, are you trying to run the command "fastboot boot recovery recovery.img"?
What version of recovery are you using?
stovie_steve said:
Can you post a fastboot getvar all, removing the serial number and imei please?
Also, are you trying to run the command "fastboot boot recovery recovery.img"?
What version of recovery are you using?
Click to expand...
Click to collapse
"(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.10.1020.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__247
(bootloader) battery-status: good
(bootloader) battery-voltage: 3920mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!"
No I try to do "fastboot boot recovery.img" as explained in the guide in order to do a nandroid back after. I use TWRP recovery. Thanks for your help
ti_coco said:
"(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.10.1020.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__247
(bootloader) battery-status: good
(bootloader) battery-voltage: 3920mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!"
No I try to do "fastboot boot recovery.img" as explained in the guide in order to do a nandroid back after. I use TWRP recovery. Thanks for your help
Click to expand...
Click to collapse
You can't use fastboot boot recovery with that version of hboot. Only works for hboot 1.44 it mentions in the guide it only works in earlier versions
You have to flash the recovery using the command fastboot flash recovery recovery.img
After that you can make a nandroid backup, but it won't contain stock recovery
stovie_steve said:
You can't use fastboot boot recovery with that version of hboot. Only works for hboot 1.44 it mentions in the guide it only works in earlier versions
You have to flash the recovery using the command fastboot flash recovery recovery.img
After that you can make a nandroid backup, but it won't contain stock recovery
Click to expand...
Click to collapse
Ok, thank you but how can I do a stock recovery then ?
ti_coco said:
Ok, thank you but how can I do a stock recovery then ?
Click to expand...
Click to collapse
I checked and couldn't find one for you. Here are other stock recoveries but none for your version
Are you planning on getting s off after you install your custom ROM? Means you can run an earlier RUU for your CID which will put you completely stock again if you need to return your phone for warranty purposes etc
stovie_steve said:
I checked and couldn't find one for you. Here are other stock recoveries but none for your version
Are you planning on getting s off after you install your custom ROM? Means you can run an earlier RUU for your CID which will put you completely stock again if you need to return your phone for warranty purposes etc
Click to expand...
Click to collapse
Sorry I don't know very well, so I don't understand what you are saying How do I become s-off after my ROM ?And what does it change?
ti_coco said:
Sorry I don't know very well, so I don't understand what you are saying How do I become s-off after my ROM ?And what does it change?
Click to expand...
Click to collapse
If you do not understand what s off is or what it means for your phone, then don't worry. It's not for you
To install the custom ROM, you need to flash the recovery rather than boot recovery as suggested by the guide. If you have any problems installing the ROM I'd be happy to help you along. But continue with the guide in the meantime
stovie_steve said:
If you do not understand what s off is or what it means for your phone, then don't worry. It's not for you
To install the custom ROM, you need to flash the recovery rather than boot recovery as suggested by the guide. If you have any problems installing the ROM I'd be happy to help you along. But continue with the guide in the meantime
Click to expand...
Click to collapse
Ok, just do I need to root my phone to install this ROM ?
ti_coco said:
Ok, just do I need to root my phone to install this ROM ?
Click to expand...
Click to collapse
To install the ROM:
1. Unlock your bootloader
2. Flash TWRP, preferably version 2.6.3.3 and download ROM to your phone
3. Make a nandroid backup in recovery
4. install ROM and follow instructions
stovie_steve said:
To install the ROM:
1. Unlock your bootloader
2. Flash TWRP, preferably version 2.6.3.3 and download ROM to your phone
3. Make a nandroid backup in recovery
4. install ROM and follow instructions
Click to expand...
Click to collapse
I did what you say but now my HTC One is stuck on HTC logo that comes on while switching it on....
ti_coco said:
I did what you say but now my HTC One is stuck on HTC logo that comes on while switching it on....
Click to expand...
Click to collapse
Did you use 2.6.3.3 version of twrp?
When installing the ROM did you choose to do a complete wipe in the options whilst installing it?
make sure you flash the lastest firmware as well...
divxdvd said:
make sure you flash the lastest firmware as well...
Click to expand...
Click to collapse
I believe he is already on the latest firmware for his device
Also, from Vomers Guide:
FIRMWARE FAQ:
Q: Do I need S-OFF for firmware flashing?
A: YES!
OP doesn't have s off
It works now, for information I used clockwork but it didn't work so I reflash my phone wirth twrp-2.6.3.3-m7.img and erase cach. Then I reinstall the ROM and it worked!
Dear Xda team,
I recently unlocked my phone via HTC dev site and I also made a backup of stock and I decided to upgrade to Custom Rom Android revolution 81..0 and since then I have had issues, I wiped all datas and now I am left with NO OS. I also tried Android revolution google play edition, it successfully installed but unforuntately boot loops because of S-ON and I dont know TWRP compatibility issues. I am confused.
Ideally, I want to get back my STOCK make an adb back up of stock, Make it S-OFF and then try all custom ROMS. I need all possible help. I am also posting other device info.
***** TAMpered*****
*****Unlocked******
M7_UL PVT SHIP S- ON RH
HBOOT- 1.57.0000
RADIO- 4T.29.3218.08
OpenDSP- boot 2048 MB
Jul1 28 2014, 18:52:08.0
Above is HBOOT display info about the device. Please kindly help me and guide me with an easy step by step process.
Awaiting replies....Cheers in advance.
Bond114 said:
Dear Xda team,
I recently unlocked my phone via HTC dev site and I also made a backup of stock and I decided to upgrade to Custom Rom Android revolution 81..0 and since then I have had issues,
Click to expand...
Click to collapse
What version of twrp are you using? Use 2.6.3.3 to flash ARHD
Ideally, I want to get back my STOCK make an adb back up of stock, Make it S-OFF and then try all custom ROMS. I need all possible help. I am also posting other device info.
***** TAMpered*****
*****Unlocked******
M7_UL PVT SHIP S- ON RH
HBOOT- 1.57.0000
RADIO- 4T.29.3218.08
OpenDSP- boot 2048 MB
Jul1 28 2014, 18:52:08.0
Click to expand...
Click to collapse
Returning back to stock will probably require s-off first so you can flash a RUU with a lower version. Better to post a complete "fastboot getvar all" (remove emei and sn) so we can determine what is the best solution for you.
alray said:
What version of twrp are you using? Use 2.6.3.3 to flash ARHD
Returning back to stock will probably require s-off first so you can flash a RUU with a lower version. Better to post a complete "fastboot getvar all" (remove emei and sn) so we can determine what is the best solution for you.
Click to expand...
Click to collapse
Version is twrp-2.6.3.0 .
getvar all info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.0
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s.....
hope this will give better picture....thanks for your prompt response.
Bond114 said:
Version is twrp-2.6.3.0 .
getvar all info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.0
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVE!
(bootloader) imei: REMOVE!
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s.....
hope this will give better picture....thanks for your prompt response.
Click to expand...
Click to collapse
I'm 100% sure that TWRP 2.6.3.0 was the cause of your trouble when flashing ARHD. Flashing twrp 2.6.3.3 should resolve that issue
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Your stock version is the pretty standard WWE version X.XX.401.X so it should not be difficult to find a nandroid backup of this version over here.
You can also just update the recovery to 2.6.3.3, flash arhd, s-off the phone. With s-off you'll be able to flash every rom you want including GPE and you'll also have the ability to use a RUU like 4.19.401.9 or 1.28.401.7 to restore your phone back to stock so your adb backup will not be required.
alray said:
I'm 100% sure that TWRP 2.6.3.0 was the cause of your trouble when flashing ARHD. Flashing twrp 2.6.3.3 should resolve that issue
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Your stock version is the pretty standard WWE version X.XX.401.X so it should not be difficult to find a nandroid backup of this version over here.
You can also just update the recovery to 2.6.3.3, flash arhd, s-off the phone. With s-off you'll be able to flash every rom you want including GPE and you'll also have the ability to use a RUU like 4.19.401.9 or 1.28.401.7 to restore your phone back to stock so your adb backup will not be required.
Click to expand...
Click to collapse
U mean i should ARHD Google play edition or ARHD 81.0.... can u also post links for nandroid backup...thankx again.
Bond114 said:
U mean i should ARHD Google play edition or ARHD 81.0.... can u also post links for nandroid backup...thankx again.
Click to expand...
Click to collapse
I tried flashing 2.6.3.3 and stuck up ......screen says ' Entering Recovery...... no activity...help pls
Bond114 said:
U mean i should ARHD Google play edition or ARHD 81.0.... can u also post links for nandroid backup...thankx again.
Click to expand...
Click to collapse
flash arhd Sense version,
then s-off, (try firewater first, if you get the "whelp" message ---> Sunshine s-off.
then you are free to do whatever you want cause you have s-off.
---------- Post added at 10:47 AM ---------- Previous post was at 10:42 AM ----------
Bond114 said:
I tried flashing 2.6.3.3 and stuck up ......screen says ' Entering Recovery...... no activity...help pls
Click to expand...
Click to collapse
have you erased the cache and reboot the bootloader first?
alray said:
flash arhd Sense version,
then s-off, (try firewater first, if you get the "whelp" message ---> Sunshine s-off.
then you are free to do whatever you want cause you have s-off.
---------- Post added at 10:47 AM ---------- Previous post was at 10:42 AM ----------
have you erased the cache and reboot the bootloader first?
Click to expand...
Click to collapse
Yes i did it.... i just flashed ARHD successfully....Gr8
it worked...no words .....thanks a ton....it was a nightmare ...i have been at it for nearly 19 hours......
thanks bro....all i can say is thanks....
Bond114 said:
Yes i did it.... i just flashed ARHD successfully....Gr8
it worked...no words .....thanks a ton....it was a nightmare ...i have been at it for nearly 19 hours......
thanks bro....all i can say is thanks....
Click to expand...
Click to collapse
you're welcome glad it worked :highfive:
alray said:
you're welcome glad it worked :highfive:
Click to expand...
Click to collapse
Bro, I tries S-OFF firewater and also murmurunner. No result. It says my firmware has an antipatch. Sunshine is asking for money. Any solution to S-OFF without much fuss.
please let me know. cheers.
Bond114 said:
Bro, I tries S-OFF firewater and also murmurunner. No result. It says my firmware has an antipatch. Sunshine is asking for money. Any solution to S-OFF without much fuss.
please let me know. cheers.
Click to expand...
Click to collapse
Sunshine is your only hope